PKTC-MTA-MIB PKTC-MTA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, DisplayString, DateAndTime, RowStatus FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF clabProjPacketCable FROM CLAB-DEF-MIB ifIndex FROM IF-MIB docsDevSwCurrentVers FROM DOCS-CABLE-DEVICE-MIB; -- version 8 pktcMtaMib MODULE-IDENTITY LAST-UPDATED "9912010000Z" -- December 1, 1999 ORGANIZATION "IPCablecom OSS Group" CONTACT-INFO "Roy Spitzer Postal: Telogy Networks, Inc. 20250 Century Blvd. Germantown, MD 20855 U.S.A. Phone: +1 301-515-6531 Fax: +1 301-515-7954 E-mail: rspitzer@telogy.com" DESCRIPTION "This MIB module supplies the basic management objects for the MTA Device." ::= { clabProjPacketCable 1 } -- Textual conventions X509Certificate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An X509 digital certificate encoded as an ASN.1 DER object." SYNTAX OCTET STRING (SIZE (0..4096)) -- -- IPCablecom supports embedded MTA only -- IPCablecom requires SNMPv3 -- pktcMtaMibObjects OBJECT IDENTIFIER ::= { pktcMtaMib 1 } pktcMtaDevBase OBJECT IDENTIFIER ::= { pktcMtaMibObjects 1 } pktcMtaDevServer OBJECT IDENTIFIER ::= { pktcMtaMibObjects 2 } pktcMtaDevSecurity OBJECT IDENTIFIER ::= { pktcMtaMibObjects 3 } pktcMtaDevEvent OBJECT IDENTIFIER ::= { pktcMtaMibObjects 4 } -- -- The following group describes the base objects in the MTA -- pktcMtaDevResetNow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) causes the device to reset. Reading this object always returns false(2)." ::= { pktcMtaDevBase 1 } pktcMtaDevSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer's serial number for this MTA." ::= { pktcMtaDevBase 2 } pktcMtaDevHardwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer's hardware version for this MTA." ::= { pktcMtaDevBase 3 } pktcMtaDevMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The telephony MAC address for this device." ::= { pktcMtaDevBase 4 } pktcMtaDevFQDN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Fully Qualified Domain Name for this MTA." ::= { pktcMtaDevBase 5 } pktcMtaDevEndPntCount OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical end points for this MTA." ::= { pktcMtaDevBase 6 } pktcMtaDevEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The MTA Admin Status of this device, where True(1) means the voice feature is enabled and false(2) indicates that it is disabled." ::= { pktcMtaDevBase 7 } pktcMtaDevTypeIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a copy of the device type identifier used in the DHCP option 60 exchanged between the MTA and the DHCP server." ::= { pktcMtaDevBase 8 } pktcMtaDevProvisioningState OBJECT-TYPE SYNTAX INTEGER { pass(1), inProgress(2), fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the completion state of the provisioning process. Pass or Fail states occur after processing of the config file is completed. InProgress occurs from boot time until config file processing is complete. Fail state requires manual intervention." ::= { pktcMtaDevBase 9 } pktcMtaDevHttpAccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether HTTP file access is supported for MTA configuration file transfer." ::= { pktcMtaDevBase 10 } -- -- The following group describes the security objects in the MTA -- pktcMtaDevManufacturerCertificate OBJECT-TYPE SYNTAX X509Certificate MAX-ACCESS read-only STATUS current DESCRIPTION "ASN.1 DER encoding of the MTA Manufacturer's X.509 public-key certificate, called MTA Manufacturer Certificate. It is issued to each MTA manufacturer and is installed into each MTA either in the factory or with a code download. The provisioning server cannot update this certificate." ::= { pktcMtaDevSecurity 1 } pktcMtaDevCertificate OBJECT-TYPE SYNTAX X509Certificate MAX-ACCESS read-only STATUS current DESCRIPTION "ASN.1 DER encoding of the MTA's X.509 public-key certificate issued by the manufacturer and installed into the embedded-MTA in the factory. This certificate, called MTA Device Certificate, contains the MTA's MAC address. It cannot be updated by the provisioning server." ::= { pktcMtaDevSecurity 2 } pktcMtaDevSignature OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique signature created by the MTA for each SNMP Inform or SNMP Trap or SNMP GetResponse message exchanged prior to enabling SNMPv3 security ASN.1 encoded Digital signature in the Cryptographic message syntax (includes nonce)." ::= { pktcMtaDevSecurity 3 } pktcMtaDevCorrelationId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Random value generated by the MTA for use in registration authorization. It is for use only in the MTA initialization messages and for MTA configuration file download." ::= { pktcMtaDevSecurity 4 } pktcMtaDevSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMtaDevSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains per endpoint security information." ::= { pktcMtaDevSecurity 5 } pktcMtaDevSecurityEntry OBJECT-TYPE SYNTAX PktcMtaDevSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of security attributes for a single IPCablecom endpoint interface associated with ifType(104)." INDEX { ifIndex } ::= { pktcMtaDevSecurityTable 1 } PktcMtaDevSecurityEntry ::= SEQUENCE { pktcMtaDevServProviderCertificate OCTET STRING, pktcMtaDevTelephonyCertificate OCTET STRING, pktcMtaDevKerberosRealm OCTET STRING, pktcMtaDevKerbPrincipalName DisplayString, pktcMtaDevServGracePeriod Integer32, pktcMtaDevLocalSystemCertificate OCTET STRING, pktcMtaDevKeyMgmtTimeout1 Integer32, pktcMtaDevKeyMgmtTimeout2 Integer32 } pktcMtaDevServProviderCertificate OBJECT-TYPE SYNTAX X509Certificate MAX-ACCESS read-write STATUS current DESCRIPTION "ASN.1 DER encoding of the Telephony Service Provider's X.509 public-key certificate, called Service Provider Certificate. It serves as the root of the intra-domain trust hierarchy. Each MTA is configured with this certificate so that it can authenticate KDCs owned by the same service provider. The provisioning server needs the ability to update this certificate in the MTAs via both SNMP and configuration files." ::= { pktcMtaDevSecurityEntry 1 } pktcMtaDevTelephonyCertificate OBJECT-TYPE SYNTAX X509Certificate MAX-ACCESS read-write STATUS current DESCRIPTION "ASN.1 DER encoding of the MTA's X.509 public-key certificate issued by the Service Provider with either the Service Provider CA or a Local System CA. This certificate, called MTA Telephony Certificate, contains the same public key as the MTA Device Certificate issued by the manufacturer. It is used to authenticate the identity of the MTA to the TGS (during PKINIT exchanges). The provisioning server needs the ability to update this certificate in the MTAs via both SNMP and configuration files." ::= { pktcMtaDevSecurityEntry 2 } pktcMtaDevKerberosRealm OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1280)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a Kerberos realm (i.e. administrative domain), required for IPCablecom key management]." ::= { pktcMtaDevSecurityEntry 3 } pktcMtaDevKerbPrincipalName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Kerberos principal name for the Call Agent. This information is required in order for the MTA to obtain Call Agent Kerberos tickets. This principal name does not include the realm, which is specified as a separate field in this configuration file. A Single Kerberos principal name MAY be shared among several Call Agents." ::= { pktcMtaDevSecurityEntry 4 } pktcMtaDevServGracePeriod OBJECT-TYPE SYNTAX Integer32 (15..600) MAX-ACCESS read-write STATUS current DESCRIPTION "The MTA MUST obtain a new Kerberos ticket (with a PKINIT exchange) this many minutes before the old ticket expires. The minimum allowable value is 15 mins. The default is 30 mins." DEFVAL { 30 } ::= { pktcMtaDevSecurityEntry 5 } pktcMtaDevLocalSystemCertificate OBJECT-TYPE SYNTAX X509Certificate MAX-ACCESS read-write STATUS current DESCRIPTION "Telephony Service Provider CA may delegate the issuance of certificates to a regional Certification Authority called Local System CA (with the corresponding Local System Certificate). This parameter is the ASN.1 DER encoding of the Local System Certificate. It MUST have a non-empty value when the MTA Telephony certificate is signed by a Local System CA. Otherwise, the value MUST be of length 0." ::= { pktcMtaDevSecurityEntry 6 } pktcMtaDevKeyMgmtTimeout1 OBJECT-TYPE SYNTAX Integer32 (15..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This timeout applies only when the MTA initiated key management. It is the period during which the MTA will save a nonce (inside the sequence number field) from the sent out AP Request and wait for the matching AP Reply from the CMS." ::= { pktcMtaDevSecurityEntry 7 } pktcMtaDevKeyMgmtTimeout2 OBJECT-TYPE SYNTAX Integer32 (15..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This timeout applies only when the CMS initiated key management (with a Wake Up or Rekey message). It is the period during which the MTA will save a nonce (inside the sequence number field) from the sent out AP Request and wait for the matching AP Reply from the CMS." ::= { pktcMtaDevSecurityEntry 8} pktcMtaDevTgsTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMtaDevTgsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains per endpoint Ticket Granting Server information." ::= { pktcMtaDevSecurity 8 } pktcMtaDevTgsEntry OBJECT-TYPE SYNTAX PktcMtaDevTgsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Tgs attributes for a single IPCablecom endpoint interface associated with ifType(104)." INDEX { ifIndex, pktcMtaDevTgsIndex } ::= { pktcMtaDevTgsTable 1 } PktcMtaDevTgsEntry ::= SEQUENCE { pktcMtaDevTgsIndex Integer32, pktcMtaDevTgsLocation DisplayString, pktcMtaDevTgsStatus RowStatus } pktcMtaDevTgsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into the TGS table for TGS locations. IfType specifies the endpoint, TgsIndex specifies a TGS." ::= { pktcMtaDevTgsEntry 1 } pktcMtaDevTgsLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the TGS - Ticket Granting Server, which is the Kerberos Server. This parameter is a FQDN or Ipv4 address. There may be multiple entries of this type. The order in which these entries are listed is the priority order in which the MTA will attempt to contact them for this endpoint." ::= { pktcMtaDevTgsEntry 2 } pktcMtaDevTgsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the Row Status associated with the pktcMtaDevTgsTable." ::= { pktcMtaDevTgsEntry 3 } -- -- The following group describes server access and parameters used for -- initial provisioning and bootstrapping. -- pktcMtaDevServerBootState OBJECT-TYPE SYNTAX INTEGER { operational(1), disabled(2), waitingForDhcpOffer(3), waitingForDhcpResponse(4), waitingForConfig(5), refusedByCmts(6), other(7), unknown(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "If operational(1), the device has completed loading and processing of configuration parameters and the Access Node has completed the Registration exchange. If disabled(2) then the device was administratively disabled, possibly by being refused network access in the configuration file. If waitingForDhcpOffer(3) then a DHCP Discover has been transmitted and no offer has yet been received. If waitingForDhcpResponse(4) then a DHCP Request has been transmitted and no response has yet been received. If waitingForConfig(5) then a request to the config parameter server has been made and no response received. If refusedByCmts(6) then the Registration Request/Response exchange with the Access Node failed." ::= { pktcMtaDevServer 1 } pktcMtaDevServerDhcp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or FQDN of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment." ::= { pktcMtaDevServer 2 } pktcMtaDevServerDns1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or FQDN of the primary DNS server that resolved an IP address for this device." ::= { pktcMtaDevServer 3 } pktcMtaDevServerDns2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or FQDN of the secondary DNS server that resolved an IP address for this device." ::= { pktcMtaDevServer 4 } pktcMtaDevConfigFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The URL of the TFTP/HTTP file for downloading provisioning and configuration parameters to this device. Returns NULL if the server address is unknown. Supports both TFTP and HTTP" ::= { pktcMtaDevServer 5 } pktcMtaDevSnmpEntity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or FQDN of the SNMP entity for provisioning trap handling that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment." ::= { pktcMtaDevServer 6 } -- -- Event Reporting -- pktcMtaDevEvControl OBJECT-TYPE SYNTAX INTEGER { resetLog(1), useDefaultReporting(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(2)." ::= { pktcMtaDevEvent 1 } pktcMtaDevEvSyslog OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or FQDN of the Syslog server. If 0.0.0.0, syslog transmission is inhibited." ::= { pktcMtaDevEvent 2 } pktcMtaDevEvThrottleAdminStatus OBJECT-TYPE SYNTAX INTEGER { unconstrained(1), maintainBelowThreshold(2), stopAtThreshold(3), inhibited(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings. maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold. stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so. inhibited(4) causes all trap transmission and syslog messages to be suppressed. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. Writing to this object resets the thresholding state. At initial startup, this object has a default value of unconstrained(1)." ::= { pktcMtaDevEvent 3 } pktcMtaDevEvThrottleInhibited OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of pktcMtaDevEvThrottleAdminStatus. In addition, this is set to true(1) if transmission is inhibited due to no syslog (pktcMtaDevEvSyslog) or trap (pktcMtaDevNmAccessEntry) destinations having been set." ::= { pktcMtaDevEvent 4 } pktcMtaDevEvThrottleThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of trap/syslog events per pktcMtaDevEvThrottleInterval to be transmitted before throttling. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. At initial startup, this object returns 0." ::= { pktcMtaDevEvent 5 } pktcMtaDevEvThrottleInterval OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval over which the trap threshold applies. At initial startup, this object has a value of 1." ::= { pktcMtaDevEvent 6 } -- -- The following table controls the reporting of the various classes of -- events. -- pktcMtaDevEvControlTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMtaDevEvControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. The mapping of event types to priorities is vendor-dependent. Vendors may also choose to allow the user to control that mapping through proprietary means." ::= { pktcMtaDevEvent 7 } pktcMtaDevEvControlEntry OBJECT-TYPE SYNTAX PktcMtaDevEvControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Allows configuration of the reporting mechanisms for a particular event priority." INDEX { pktcMtaDevEvPriority } ::= { pktcMtaDevEvControlTable 1 } PktcMtaDevEvControlEntry ::= SEQUENCE { pktcMtaDevEvPriority INTEGER, pktcMtaDevEvReporting BITS } pktcMtaDevEvPriority OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority level that is controlled by this entry. These are ordered from most (emergency) to least (debug) critical. Each event with a CM or Access Node has a particular priority level associated with it (as defined by the vendor). During normal operation no event more critical than notice(6) should be generated. Events between warning and emergency should be generated at appropriate levels of problems (e.g. emergency when the box is about to crash)." ::= { pktcMtaDevEvControlEntry 1 } pktcMtaDevEvReporting OBJECT-TYPE SYNTAX BITS { local(0), traps(1), syslog(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum must allow traps and syslogging to be disabled. If the local(0) bit is set, then log to the internal log, if the traps(1) bit is set, then generate a trap, if the syslog(2) bit is set, then send a syslog message (assuming the syslog address is set)." ::= { pktcMtaDevEvControlEntry 2 } pktcMtaDevEventTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMtaDevEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a log of network and device events that may be of interest in fault isolation and troubleshooting." ::= { pktcMtaDevEvent 8 } pktcMtaDevEventEntry OBJECT-TYPE SYNTAX PktcMtaDevEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by incrementing pktcMtaDevEvCounts and setting pktcMtaDevEvLastTime to the current time rather than creating multiple rows. Entries are created with the first occurrance of an event. pktcMtaDevEvControl can be used to clear the table. Individual events can not be deleted." INDEX { pktcMtaDevEvIndex } ::= { pktcMtaDevEventTable 1 } PktcMtaDevEventEntry ::= SEQUENCE { pktcMtaDevEvIndex INTEGER, pktcMtaDevEvFirstTime DateAndTime, pktcMtaDevEvLastTime DateAndTime, pktcMtaDevEvCounts Counter32, pktcMtaDevEvLevel INTEGER, pktcMtaDevEvId Unsigned32, pktcMtaDevEvText DisplayString } pktcMtaDevEvIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via pktcMtaDevEvControl, (b) the device reboots and does not implement non-volatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1." ::= { pktcMtaDevEventEntry 1 } pktcMtaDevEvFirstTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that this entry was created." ::= { pktcMtaDevEventEntry 2 } pktcMtaDevEvLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as pktcMtaDevEvFirstTime." ::= { pktcMtaDevEventEntry 3 } pktcMtaDevEvCounts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event." ::= { pktcMtaDevEventEntry 4 } pktcMtaDevEvLevel OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), information(5), notice(6), debug(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority level of this event as defined by the vendor. These are ordered from most serious (critical) to least serious (debug)." ::= { pktcMtaDevEventEntry 5 } -- -- Vendors will provide their own enumerations for the following. -- The interpretation of the enumeration is unambiguous for a -- particular value of the vendor's enterprise number in sysObjectID. -- pktcMtaDevEvId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "For this product, uniquely identifies the type of event that is reported by this entry." ::= { pktcMtaDevEventEntry 6 } pktcMtaDevEvText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Provides a human-readable description of the event, including all relevant context (interface numbers, etc.)." ::= { pktcMtaDevEventEntry 7 } -- -- notification group is for future extension. -- pktcMtaNotification OBJECT IDENTIFIER ::= { pktcMtaMib 2 } pktcMtaConformance OBJECT IDENTIFIER ::= { pktcMtaMib 3 } pktcMtaCompliances OBJECT IDENTIFIER ::= { pktcMtaConformance 1 } pktcMtaGroups OBJECT IDENTIFIER ::= { pktcMtaConformance 2 } -- -- Notification Group -- pktcMtaProvisioningEnrollment NOTIFICATION-TYPE OBJECTS { pktcMtaDevHardwareVersion, docsDevSwCurrentVers, pktcMtaDevTypeIdentifier, pktcMtaDevMacAddress, pktcMtaDevCorrelationId, pktcMtaDevSignature } STATUS current DESCRIPTION "This inform is issued to initiate the IPCablecom process provisioning." REFERENCE "Inform as defined in RFC 1902" ::= { pktcMtaNotification 1 } pktcMtaProvisioningStatus NOTIFICATION-TYPE OBJECTS { pktcMtaDevMacAddress, pktcMtaDevCorrelationId, pktcMtaDevSignature, pktcMtaDevProvisioningState } STATUS current DESCRIPTION "This inform is issued to confirm completion of the IPCablecom provisioning process, and indicate the completion state." REFERENCE "Inform as defined in RFC 1902" ::= { pktcMtaNotification 2 } -- compliance statements pktcMtaBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement MTA feature." MODULE --pktcMtaMib -- unconditionally mandatory groups MANDATORY-GROUPS { pktcMtaGroup } -- units of conformance OBJECT pktcMtaDevCorrelationId MIN-ACCESS read-only DESCRIPTION "not-accessible when request is SNMP get read-only when used in informs during provisioning." OBJECT pktcMtaDevCertificate MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file ` download, otherwise it's a read-only object." OBJECT pktcMtaDevTelephonyCertificate MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevServProviderCertificate MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevLocalSystemCertificate MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevKerberosRealm MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevTgsLocation MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevKerbPrincipalName MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." OBJECT pktcMtaDevServGracePeriod MIN-ACCESS read-only DESCRIPTION "Read-write when request is through configuration file download, otherwise it's a read-only object." ::= { pktcMtaCompliances 3 } pktcMtaGroup OBJECT-GROUP OBJECTS { pktcMtaDevResetNow, pktcMtaDevSerialNumber, pktcMtaDevHardwareVersion, pktcMtaDevMacAddress, pktcMtaDevFQDN, pktcMtaDevEndPntCount, pktcMtaDevEnabled, pktcMtaDevTypeIdentifier, pktcMtaDevProvisioningState, pktcMtaDevCertificate, pktcMtaDevSignature, pktcMtaDevCorrelationId, pktcMtaDevManufacturerCertificate, pktcMtaDevTelephonyCertificate, pktcMtaDevServProviderCertificate, pktcMtaDevLocalSystemCertificate, pktcMtaDevKerberosRealm, pktcMtaDevTgsLocation, pktcMtaDevKerbPrincipalName, pktcMtaDevServGracePeriod, pktcMtaDevKeyMgmtTimeout1, pktcMtaDevKeyMgmtTimeout2, pktcMtaDevServerBootState, pktcMtaDevServerDhcp, pktcMtaDevSnmpEntity, pktcMtaDevEvControl, pktcMtaDevEvSyslog, pktcMtaDevEvThrottleAdminStatus, pktcMtaDevEvThrottleInhibited, pktcMtaDevEvThrottleThreshold, pktcMtaDevEvThrottleInterval, pktcMtaDevEvReporting, pktcMtaDevEvFirstTime, pktcMtaDevEvLastTime, pktcMtaDevEvCounts, pktcMtaDevEvLevel, pktcMtaDevEvId, pktcMtaDevEvText } STATUS current DESCRIPTION "Group of objects for IPCablecom MTA MIB." ::= { pktcMtaGroups 1 } END