CISCO-CIRCUIT-INTERFACE-MIB -- ***************************************************************** -- CISCO-CIRCUIT-INTERFACE-MIB.my: CISCO-CIRCUIT-INTERFACE MIB -- -- March 2000, Vinod B C -- -- Copyright (c) 2000 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- CISCO-CIRCUIT-INTERFACE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI; ciscoCircuitInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200005090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify circuits on interfaces like ATM, frame-relay etc." REVISION "200005090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 160 } ciscoCircuitInterfaceMIBObjects OBJECT IDENTIFIER ::= { ciscoCircuitInterfaceMIB 1 } cciDescription OBJECT IDENTIFIER ::= { ciscoCircuitInterfaceMIBObjects 1 } -- -- Circuit Description Table -- cciDescriptionTable OBJECT-TYPE SYNTAX SEQUENCE OF CciDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a circuit description to identify circuit based interfaces like ATM, Frame-Relay etc. The circuit description could be used for example, to correlate performance statistics associated with the corresponding interfaces." ::= { cciDescription 1 } cciDescriptionEntry OBJECT-TYPE SYNTAX CciDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each cciDescriptionEntry contains the circuit description for a particular circuit based interface. The entry is identified by the ifIndex which would typically correspond to circuit based interfaces. Interfaces with ifType equal to atm(37), frameRelay(32) frameRelayService(44) are some examples. Entries can only be created by management station action. Entries can be deleted by setting the cciStatus object to destroy(6). The agent will delete any cciEntry if the corresponding ifEntry is deleted. Entries are not maintained in any kind of NV-storage, and will not be recreated by the agent after a reboot." INDEX { ifIndex } ::= { cciDescriptionTable 1 } CciDescriptionEntry ::= SEQUENCE { cciDescr SnmpAdminString, cciStatus RowStatus } cciDescr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The circuit description of the interface. It has no default value." ::= { cciDescriptionEntry 1 } cciStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status object, but with restricted values. Only two values are allowed for this object: createAndGo(4) and destroy(6). The row is created by specifying the value for cciDescr and setting this object to createAndGo(4). If the row creation is succesfull, the cciStatus would be active(1). In the active(1) state, the cciDescr can be modifed. The row is deleted by setting this object to destroy(6)." ::= { cciDescriptionEntry 2 } -- Conformance Information ciscoCircuitInterfaceMIBConformance OBJECT IDENTIFIER ::= { ciscoCircuitInterfaceMIB 3 } ciscoCircuitInterfaceMIBCompliances OBJECT IDENTIFIER ::= { ciscoCircuitInterfaceMIBConformance 1 } ciscoCircuitInterfaceMIBGroups OBJECT IDENTIFIER ::= { ciscoCircuitInterfaceMIBConformance 2 } -- Compliance Statement ciscoCircuitInterfaceMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Cisco agents which implement the Cisco Circuit Interface MIB." MODULE -- this module MANDATORY-GROUPS { ciscoCircuitInterfaceGroup } ::= { ciscoCircuitInterfaceMIBCompliances 1 } -- Units of Conformance: ciscoCircuitInterfaceGroup OBJECT-GROUP OBJECTS { cciDescr, cciStatus } STATUS current DESCRIPTION "The Cisco Circuit Interface MIB objects." ::= { ciscoCircuitInterfaceMIBGroups 1 } END