You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY by vendor Cisco

CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY.


Vendor: Cisco
Mib: CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY.my:  Cisco DOT11 
-- RADIO DIAGNOSTIC MIB AGENT CAPABILITIES
--
-- September 2003 - Parthasarathy Venkatavaradhan,
-- Prasanna Viswakumar
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;


ciscoDot11RadioDiagCapability  MODULE-IDENTITY  
        LAST-UPDATED    "200309030000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-dot11@cisco.com"
        DESCRIPTION
                "Agent capabilities for
                     CISCO-DOT11-RADIO-DIAGNOSTIC-MIB"
        ::= { ciscoAgentCapability 335 }

ciscoDot11RadioDiagCapabilityV1 AGENT-CAPABILITIES
    
PRODUCT-RELEASE "Cisco IOS 12.2"
        STATUS          current
        DESCRIPTION     "Cisco Dot11 RADIO DIAGNOSTIC MIB capabilities"

        SUPPORTS        CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
        INCLUDES        { cDot11RadioDiagConfigGlobalGroup }

        VARIATION       cDot11RadioDiagTempChannel
        DESCRIPTION     "The read-write operations on this object
                         are supported only for 802.11b
                         interfaces. "
           
        VARIATION       cDot11RadioDiagTempTxPowerLevel
        DESCRIPTION     "The read-write operations on this object
                         are supported only for 802.11b
                         interfaces.

                         Only six power levels are currently
                         supported.  Hence, the maximum value this
                         object can be set to is 6. "

        VARIATION       cDot11RadioDiagMode
        DESCRIPTION     "The read-write operations on this object
                         are supported only for 802.11b
                         interfaces. "

        VARIATION       cDot11RadioDiagSettingsEnabled
        DESCRIPTION     "The read-write operations on this object
                         are supported only for 802.11b
                         interfaces. "

::= { ciscoDot11RadioDiagCapability 1 }

END