You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-IETF-MPLS-VPN-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-IETF-MPLS-VPN-CAPABILITY by vendor Cisco

CISCO-IETF-MPLS-VPN-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-IETF-MPLS-VPN-CAPABILITY.


Vendor: Cisco
Mib: CISCO-IETF-MPLS-VPN-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-IETF-MPLS-VPN-CAPABILITY.my:  Capability statement for MPLS
--	Cisco's implementation of the Virtual Private Network MIB
--
-- June 25, 2003 - Adrien Grise
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- 
-- *****************************************************************

CISCO-IETF-MPLS-VPN-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY
      FROM SNMPv2-SMI

   AGENT-CAPABILITIES 
      FROM SNMPv2-CONF

   ciscoAgentCapability
      FROM CISCO-SMI;

   
ciscoMplsVpnCapability MODULE-IDENTITY
        LAST-UPDATED        "200306251200Z" -- 25 June 2003 12:00:00
        ORGANIZATION        "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: mpls-mib@cisco.com"
        DESCRIPTION
                "Agent capabilities for MPLS-VPN-MIB"
        REVISION        "200306251200Z" -- 25 June 2003 12:00:00
        DESCRIPTION
                "Initial version."
        ::= {  ciscoAgentCapability 308 }

ciscoMplsVpnCapabilityV12 AGENT-CAPABILITIES

	PRODUCT-RELEASE "Cisco IOS 12.0(21)ST, Cisco IOS 12.2(21)T"
	STATUS      current
	DESCRIPTION "MPLS Virtual Private Network MIB capabilities"

	SUPPORTS    MPLS-VPN-MIB
	INCLUDES    { mplsVpnScalarGroup,
        	      mplsVpnVrfGroup,
	              mplsVpnInterfaceGroup,
        	      mplsVpnPerfGroup,
	              mplsVpnVrfBgpNbrGroup,
	              mplsVpnVrfRouteGroup,
	              mplsVpnVrfRouteTargetGroup
	            }

        ::= { ciscoMplsVpnCapability 1 }

END