CISCO-NMS-APPL-HEALTH-MIB -- ***************************************************************** -- Descriptions of Managed Objects for NMS Application Health Status. -- -- September 2001, Tirthankar Banerjee -- -- Copyright (c) 2001 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-NMS-APPL-HEALTH-MIB DEFINITIONS ::= BEGIN IMPORTS DateAndTime FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoMgmt FROM CISCO-SMI CiscoAlarmSeverity FROM CISCO-TC; ciscoNmsApplHealthMIB MODULE-IDENTITY LAST-UPDATED "200110240000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-nmsapplhealth@cisco.com" DESCRIPTION "This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sent to the OSS/NMS to inform them about the NMS application status (started, stopped, failed, busy etc.) or any abnormal exit of applications." REVISION "200110240000Z" DESCRIPTION "Added cnaHealthStatusChangeTime (DateAndTime) object." REVISION "200110150000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 237 } ciscoNmsApplHealthNotifs OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIB 0 } ciscoNmsApplHealthMIBObjects OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIB 1 } ciscoNmsApplHealthMIBConforms OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIB 2 } cnaHealthObj OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIBObjects 1} --Cisco NMS Application Health Objects cnaHealthNotifSeqNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the sequence number of notifications in order for the NMS/OSS to detect missing notification(s)." ::= { cnaHealthObj 1 } cnaHealthTable OBJECT-TYPE SYNTAX SEQUENCE OF CnaHealthTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information about the health of one or more Cisco NMS application(s)." ::= { cnaHealthObj 2} cnaHealthTableEntry OBJECT-TYPE SYNTAX CnaHealthTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries appear in this table for each possible alarm state." INDEX { cnaHealthTableIndex } ::= { cnaHealthTable 1 } CnaHealthTableEntry::= SEQUENCE { cnaHealthTableIndex Unsigned32, cnaHealthStatusChangeTime DateAndTime, cnaHealthName SnmpAdminString, cnaHealthStatus INTEGER, cnaHealthSevLevel CiscoAlarmSeverity, cnaHealthComLineArgs SnmpAdminString, cnaHealthStatusDesc SnmpAdminString } cnaHealthTableIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This acts as the index to the cnaHealthTable." ::= { cnaHealthTableEntry 1 } cnaHealthStatusChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when a change in the health status of Cisco NMS Application occurs." ::= { cnaHealthTableEntry 2 } cnaHealthName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the name of the NMS application, the notification is about." ::= { cnaHealthTableEntry 3 } cnaHealthStatus OBJECT-TYPE SYNTAX INTEGER { started (1), stopped (2), busy (3), failed (4), exited (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the health/status of the NMS application, the notification is reporting about. The possible values are: started(1) : started & initialized successfully stopped(2) : stopped successfully busy(3) : not able to respond to any request from health monitor until the status changed to started failed(4) : upon detecting error condition, logged and exited exited(5) : abnormally exited without logging" ::= { cnaHealthTableEntry 4 } cnaHealthSevLevel OBJECT-TYPE SYNTAX CiscoAlarmSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the severity level of the cna health status Notifications." DEFVAL { info } ::= { cnaHealthTableEntry 5 } cnaHealthComLineArgs OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the command-line arguments of the NMS application being reported about in the notifications." ::= { cnaHealthTableEntry 6 } cnaHealthStatusDesc OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives a detailed description of the health/ status of the application being reported in a notification. In case of failed(4) status, this field must indicate the error description. For any other cnaStatus, this field may contain a description to qualify the cnaStatus, like 'Started & initialized succesfully' or an empty string." ::= { cnaHealthTableEntry 7 } -- NOTIFICATION -- cnaHealthNotif NOTIFICATION-TYPE OBJECTS { cnaHealthNotifSeqNum, cnaHealthStatusChangeTime, cnaHealthName, cnaHealthStatus, cnaHealthSevLevel, cnaHealthComLineArgs, cnaHealthStatusDesc } STATUS current DESCRIPTION "This notification is sent out to notify normal startup, shutdown, intermediate health/status (ex: busy etc.), failed or exit status." ::= { ciscoNmsApplHealthNotifs 1 } -- Conformance cnaHealthMIBCompliances OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIBConforms 1} cnaHealthMIBGroups OBJECT IDENTIFIER ::= { ciscoNmsApplHealthMIBConforms 2} -- Compliance cnaHealthMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco NMS Application Health Monitor MIB." MODULE -- this module MANDATORY-GROUPS { cnaHealthMIBGroup, cnaHealthNotifGroup } ::= { cnaHealthMIBCompliances 1 } -- Units of Conformance cnaHealthMIBGroup OBJECT-GROUP OBJECTS { cnaHealthNotifSeqNum, cnaHealthTableIndex, cnaHealthStatusChangeTime, cnaHealthName, cnaHealthStatus, cnaHealthSevLevel, cnaHealthComLineArgs, cnaHealthStatusDesc } STATUS current DESCRIPTION "A collection of objects providing Cisco NMS Application normal health info" ::= { cnaHealthMIBGroups 1 } cnaHealthNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cnaHealthNotif } STATUS current DESCRIPTION "The set of notification events a Cisco NMS application supports." ::= { cnaHealthMIBGroups 2 } END