CTIF-EXT-MIB CTIF-EXT-MIB DEFINITIONS ::= BEGIN -- ctif-ext-mib Cabletron's extension to the MIB-II -- Revision: 1.06.03 -- Part Number: 2170559 -- LAST-UPDATED "200302241529Z" - Mon Feb 24 15:29 GMT 2003 -- ORGANIZATION "Enterasys Networks" -- CONTACT-INFO -- "Postal: Enterasys Networks -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- USA -- Phone: +1 603 332 9400 -- E-mail: support@enterasys.com -- WWW: http://www.enterasys.com" -- This module provides authoritative definitions for part -- of the naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright 1995-2003 Enterasys Networks, Inc. IMPORTS ctronMib2 FROM CTRON-MIB-NAMES ifIndex FROM IF-MIB Counter FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- Textual convention -- DisplayString ::= OCTET STRING -- This data type is used to model textual information taken from -- the NVT ASCII character set. By convention, objects with this -- syntax are declared as having: -- -- SIZE (0..255) -- This MIB defines Cabletron extensions to MIB-II. Groups within this MIB -- refer to the group that the objects pertain to within MIB-II. -- Groups within this MIB are commonDev OBJECT IDENTIFIER ::= { ctronMib2 1 } ctIf OBJECT IDENTIFIER ::= { ctronMib2 2 } ctIfPort OBJECT IDENTIFIER ::= { ctronMib2 3 } ctIfCp OBJECT IDENTIFIER ::= { ctronMib2 4 } ctSNMP OBJECT IDENTIFIER ::= { ctronMib2 5 } ctSonet OBJECT IDENTIFIER ::= { ctronMib2 6 } ctVirtual OBJECT IDENTIFIER ::= { ctronMib2 7 } ctStats OBJECT IDENTIFIER ::= { ctronMib2 8 } ctFramerConfig OBJECT IDENTIFIER ::= { ctronMib2 9 } ctIfHC OBJECT IDENTIFIER ::= { ctronMib2 10 } -- The commonDevice group this group is an extension to the system -- group of MIB2. It contains similar information to that defined -- within the system group of MIB-II. -- Implementation of this group is optional for all Cabletron -- devices. comDeviceTime OBJECT-TYPE SYNTAX DisplayString (SIZE(6|8)) ACCESS read-write STATUS mandatory DESCRIPTION "The current time of day, in 24 hour format, as measured by the device. The representation shall use the standard HHMMSS format." ::= { commonDev 1 } comDeviceDate OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "The current date, as measured by the device. The representation shall use the standard MMDDYYYY format." ::= { commonDev 2 } comDeviceBoardMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains a bit encoded representation of slots that contain MIM boards. If a bit is one then that slot is occupied by a board." ::= { commonDev 3 } -- ctIf group implementation of this group is optional -- the ctIf group contains information about the type of interface ie -- the type of BRIM etc. This information is not available -- in the interface group of MIB-II. ctIfTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines an extension to the interface table." ::= { ctIf 1 } ctIfEntry OBJECT-TYPE SYNTAX CtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctIfTable" INDEX { ctIfNumber } ::= { ctIfTable 1 } CtIfEntry ::= SEQUENCE { ctIfNumber INTEGER, ctIfPortCnt INTEGER, ctIfConnectionType OBJECT IDENTIFIER, ctIfLAA OCTET STRING, ctIfDuplex INTEGER, ctIfCapability INTEGER, ctIfRedundancy INTEGER } ctIfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the interface that is being described. This is the same as ifIndex." ::= { ctIfEntry 1 } ctIfPortCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the number of ports on the interface that is being described." ::= { ctIfEntry 2 } ctIfConnectionType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Defines the specific type of the interface connection (BRIM, etc). This is defined within ctron-oids. This differs from the nature of the interface as defined by ifType as found in MIB-II." ::= { ctIfEntry 3 } ctIfLAA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a device (with a Token Ring interface) to set a Locally Administered Address (LAA) for it's MAC hardware address. When set, this LAA will override the default Universally Administered Address or burned in address of the interface. For devices that do not support LAA: - a read will return all zeros. - any write attempt will return BADVALUE. For devices that support LAA: - valid values are 4000 0000 0000 to 4000 7fff ffff, and 0000 0000 0000 (a value of all zeros, causes interface to use the burned in address). - a set (write) with an invalid value, returns BADVALUE. - after a write, new values will only become active after the Token Ring interface has been closed and then opened again. - a read of ctIfLAA will always return same value as ifPhysAddress, except in the case where; o ctIfLAA has been set, but interface has not yet been closed and reopened, in this case the last set value is returned. Note that a read of ifPhysAddress will always return the physical address currently being used by the interface." ::= { ctIfEntry 4 } ctIfDuplex OBJECT-TYPE SYNTAX INTEGER { other(1), standard(2), full(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the duplex mode that the interface is set to operate in. For devices that do not support this capability: - a read will return standard(2). - any write attempt will return BADVALUE. - fast ethernet devices will report other(1)." ::= { ctIfEntry 5 } ctIfCapability OBJECT-TYPE SYNTAX INTEGER { other(1), standard(2), fullDuplex(3), fastEthernet(4), ethernetBased(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the cabability of the underlying hardware in supporting full duplex. This object will have a value of fullDuplex(3) if all hardware is capable of supporting full duplex operation." ::= { ctIfEntry 6 } ctIfRedundancy OBJECT-TYPE SYNTAX INTEGER { redundant (1), not-redundant (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines whether or not an interface supports redundancy." ::= { ctIfEntry 7 } -- ctIfPort group implementation of this group is optional -- The ctIfPort group contains information about the type of port on the -- interface ie the type of EPIM, TPIM etc. This information is not -- available in the interface group of MIB-II. ctIfPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines an extension to the interface table." ::= { ctIfPort 1 } ctIfPortEntry OBJECT-TYPE SYNTAX CtIfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctIfPortTable" INDEX { ctIfPortIfNumber, ctIfPortPortNumber } ::= { ctIfPortTable 1 } CtIfPortEntry ::= SEQUENCE { ctIfPortPortNumber INTEGER, ctIfPortIfNumber INTEGER, ctIfPortType OBJECT IDENTIFIER, ctIfPortLinkStatus INTEGER, ctIfPortTrapStatus INTEGER } ctIfPortPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the port that is being described." ::= { ctIfPortEntry 1 } ctIfPortIfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the interface that the port being described is on." ::= { ctIfPortEntry 2 } ctIfPortType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Defines the specific type of the port (EPIM, TPIM). This is defined within ctron-oids." ::= { ctIfPortEntry 3 } ctIfPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { notLinked(1), linked(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the status of the port connection." ::= { ctIfPortEntry 4 } ctIfPortTrapStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) -- default } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the trap forwarding status of the port. A value of (1) indicates that a trap WILL NOT be sent if the port goes down and a value of (2) which is the default value, indicates that a trap WILL be sent if the port goes down." ::= { ctIfPortEntry 5 } -- ctIfCp group implementation of this group is optional -- the ctIfCp group contains information about the com port configuration -- on the MMAC Management Modules (e.g., EMME, TRMM), and on the MMAC-Plus -- Environmental Module ctCpTable OBJECT-TYPE SYNTAX SEQUENCE OF CtCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines a Com Port Table." ::= { ctIfCp 1 } ctCpEntry OBJECT-TYPE SYNTAX CtCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctCPTable" INDEX { ctComPort } ::= { ctCpTable 1 } CtCpEntry ::= SEQUENCE { ctComPort INTEGER, ctCpFunction INTEGER, ctIfNum INTEGER, ctCpAdminStatus INTEGER } ctComPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index into the Com Port Table and defines the Com Port that is being described. com1 = 1, com2 = 2" ::= { ctCpEntry 1 } ctCpFunction OBJECT-TYPE SYNTAX INTEGER { lm(1), -- Local Management (default) ups(2), -- UPS slip(3), -- SLIP ppp(4) -- PPP } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Com Port Function supported by that Com Port." ::= { ctCpEntry 2 } ctIfNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the interface that is being described. This is the same as ifIndex. This is only valid if ctCpFunction is SLIP or PPP, otherwise, 0" ::= { ctCpEntry 3 } ctCpAdminStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) -- default } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative state of the Com Port." ::= { ctCpEntry 4 } -- The SNMP group. Implementation of this group is mandatory when -- the SNMPv2 protocol is present within the device. enableSNMPv1 OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows control over the SNMPv1 protocol. If set to a value of disable(1) then the SNMPv1 protocol will not be accepted by the device." ::= { ctSNMP 1 } enableSNMPv2 OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows control over the SNMPv2 protocol. If set to a value of disable(1) then the SNMPv2 protocol will not be accepted by the device." ::= { ctSNMP 2 } enableSNMPv1Counter64 OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows control over the SNMPv1 protocol agent. If set to a value of enable(2) then the SNMPv1 agent will return Counter64 objects using SNMPv2 syntax. If set to a value of disable(1) then the SNMPv1 agent will return any Counter64 objects as Counter32." ::= { ctSNMP 3 } -- ctIfNumber {ctIfEntry 1} -- ctIfPortPortNumber {ctIfPortEntry 1} -- The ctSonet group is an optional group. IT contains information -- pertaining to the optical connectivity speed. ctSonetTable OBJECT-TYPE SYNTAX SEQUENCE OF CtSonetEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "This table defines the Sonet table." ::= { ctSonet 1 } ctSonetEntry OBJECT-TYPE SYNTAX CtSonetEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "This defines each conceptual row within the ctSonetTable." INDEX { ctSonetIfIndex } ::= { ctSonetTable 1 } CtSonetEntry ::= SEQUENCE { ctSonetIfIndex INTEGER, ctSonetMediumType INTEGER } ctSonetIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "This defines the interface being described. It is the same as IfIndex." ::= { ctSonetEntry 1 } ctSonetMediumType OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { ctSonetEntry 2 } -- ctVirtual group implementation is optional -- The ctVirtual group contains information on managing virtual interfaces -- and ports. ctVirtualIfTable OBJECT-TYPE SYNTAX SEQUENCE OF CtVirtualIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines a Virtual IF Table." ::= { ctVirtual 1 } ctVirtualIfEntry OBJECT-TYPE SYNTAX CtVirtualIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctVirtualIfTable" INDEX { ctVirtualIfIndex } ::= { ctVirtualIfTable 1 } CtVirtualIfEntry ::= SEQUENCE { ctVirtualIfIndex INTEGER, ctVirtualIfPhysicalInterface INTEGER, ctVirtualIfType OBJECT IDENTIFIER, ctVirtualIfNumPorts INTEGER } ctVirtualIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the virtual If Index." ::= { ctVirtualIfEntry 1 } ctVirtualIfPhysicalInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value displays the physical interface that owns the virtual interface. This is the IfIndex from MIB-II." ::= { ctVirtualIfEntry 2 } ctVirtualIfType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This value displays the physical interface type." ::= { ctVirtualIfEntry 3 } ctVirtualIfNumPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value displays the number of virtual ports." ::= { ctVirtualIfEntry 4 } ctVirtualIfPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CtVirtualIfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the Virtual Port types." ::= { ctVirtual 2 } ctVirtualIfPortEntry OBJECT-TYPE SYNTAX CtVirtualIfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctVirtualIfPortTable." INDEX { ctVirtualIfPortIfIndex, ctVirtualIfPortNumber } ::= { ctVirtualIfPortTable 1 } CtVirtualIfPortEntry ::= SEQUENCE { ctVirtualIfPortIfIndex INTEGER, ctVirtualIfPortNumber INTEGER, ctVirtualIfPortType INTEGER, ctVirtualIfPortVPI INTEGER, ctVirtualIfPortVCI INTEGER } ctVirtualIfPortIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the virtual If Index." ::= { ctVirtualIfPortEntry 1 } ctVirtualIfPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The application port number of the port being described." ::= { ctVirtualIfPortEntry 2 } ctVirtualIfPortType OBJECT-TYPE SYNTAX INTEGER { portVirtualTypeSvc (1), portVirtualTypePvcLlc (2), portVirtualTypePvcVcmux (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This defines the port type from ctron-oids." ::= { ctVirtualIfPortEntry 3 } ctVirtualIfPortVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This returns the Virtual Path Identifier value." ::= { ctVirtualIfPortEntry 4 } ctVirtualIfPortVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This returns the Virtual Channel Identifier value." ::= { ctVirtualIfPortEntry 5 } -- The ctStats group is an optional group. It contains information -- pertaining to the ability to pass Token Ring MAC frames to the HOST -- to collect stats on an interface. ctStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CtStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the Stats table." ::= { ctStats 1 } ctStatsEntry OBJECT-TYPE SYNTAX CtStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each StatsTable." INDEX { ctStatsIfIndex } ::= { ctStatsTable 1 } CtStatsEntry ::= SEQUENCE { ctStatsIfIndex INTEGER, ctStatsIfEnable INTEGER } ctStatsIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This defines the interface being described. It is the same as IfIndex." ::= { ctStatsEntry 1 } ctStatsIfEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This allows the interface to pass Token Ring MAC frames to the HOST for processing. When disabled, stats will not be gathered on the interface. Default is Enabled. For devices that do not support this capability any write attempt will return BADVALUE." ::= { ctStatsEntry 2 } -- ctIfHC group implementation of this group is optional -- the ctIfHC group contains 64 bit equivalent counter support on high -- capacity ethernet interfaces. This information is not available -- in the interface group of MIB-II. ctIfHCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIfHCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines an extension to the interface table. This table consists of interface counters grouped together. For each counter type in the table their is a 32 bit counter and a 32 bit overflow counter. This effectively provides a method for counting up to 64 bits." ::= { ctIfHC 1 } ctIfHCStatsEntry OBJECT-TYPE SYNTAX CtIfHCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines each conceptual row within the ctIfHCStatsTable. Entries in this table will exist for High Capacity Interfaces." INDEX { ifIndex } ::= { ctIfHCStatsTable 1 } CtIfHCStatsEntry ::= SEQUENCE { ctIfInOctets Counter, ctIfInOctetsOverflows Counter, ctIfInUcastPkts Counter, ctIfInUcastPktsOverflows Counter, ctIfInMulticastPkts Counter, ctIfInMulticastPktsOverflows Counter, ctIfInBroadcastPkts Counter, ctIfInBroadcastPktsOverflows Counter, ctIfOutOctets Counter, ctIfOutOctetsOverflows Counter, ctIfOutUcastPkts Counter, ctIfOutUcastPktsOverflows Counter, ctIfOutMulticastPkts Counter, ctIfOutMulticastPktsOverflows Counter, ctIfOutBroadcastPkts Counter, ctIfOutBroadcastPktsOverflows Counter } ctIfInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { ctIfHCStatsEntry 1 } ctIfInOctetsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfInOctets counter has overflowed." ::= { ctIfHCStatsEntry 2 } ctIfInUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer." ::= { ctIfHCStatsEntry 3 } ctIfInUcastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfInUcastPkts counter has overflowed." ::= { ctIfHCStatsEntry 4 } ctIfInMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ctIfHCStatsEntry 5 } ctIfInMulticastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfInMulticastPkts counter has overflowed." ::= { ctIfHCStatsEntry 6 } ctIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { ctIfHCStatsEntry 7 } ctIfInBroadcastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfInBroadcastPkts counter has overflowed." ::= { ctIfHCStatsEntry 8 } ctIfOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { ctIfHCStatsEntry 9 } ctIfOutOctetsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfOutOctets counter has overflowed." ::= { ctIfHCStatsEntry 10 } ctIfOutUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent." ::= { ctIfHCStatsEntry 11 } ctIfOutUcastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfOutUcastPkts counter has overflowed." ::= { ctIfHCStatsEntry 12 } ctIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ctIfHCStatsEntry 13 } ctIfOutMulticastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfOutMulticastPkts counter has overflowed." ::= { ctIfHCStatsEntry 14 } ctIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { ctIfHCStatsEntry 15 } ctIfOutBroadcastPktsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the associated ctIfOutBroadcastPkts counter has overflowed." ::= { ctIfHCStatsEntry 16 } -- Trap Description -- InterfacePortInsertion -- Specfic Trap Type Code - 0x1A0 -- This trap will be generated when it is detected that an -- interface port has been inserted. -- The interesting information will include: -- ctIfNumber {ctIfEntry 1} -- ctIfPortPortNumber {ctIfPortEntry 1} -- ctIfPortType {ctIfPortEntry 3} -- Trap Description -- InterfacePortRemoval -- Specfic Trap Type Code - 0x1A1 -- This trap will be generated when it is detected that an -- interface port has been removed. -- The interesting information will include: -- ctIfNumber {ctIfEntry 1} -- ctIfPortPortNumber {ctIfPortEntry 1} -- Trap Description -- InterfacePortLinkUp -- Specfic Trap Type Code - 0x1A2 -- This trap will be generated when it is determined that -- a port on a strictly bridging interface (not a "repeater") has -- been connected to a LAN. This is only appropriate -- for ports that support the concept of a link state. -- The interesting information will include: -- ctIfNumber {ctIfEntry 1} -- ctIfPortPortNumber {ctIfPortEntry 1} -- Trap Description -- InterfacePortLinkDown -- Specfic Trap Type Code - 0x1A3 -- This trap will be generated when a previously attached -- bridging port has been disconnected from a LAN. This is only -- appropriate for ports that support the concept of a link state. -- The interesting information will include: END