CTRON-IF-REMAP-2-MIB CTRON-IF-REMAP-2-MIB DEFINITIONS ::= BEGIN -- ctron-if-remap-2-mib.txt -- Revision: 02.00.02 -- Part Number: -- Date: September 15, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific Interface Remap MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 98 Cabletron Systems IMPORTS OBJECT-TYPE FROM RFC-1212 ctIFRemap2 FROM CTRON-MIB-NAMES; ctIFRemap2Config OBJECT IDENTIFIER ::= { ctIFRemap2 1 } -- The ctIFRemap2Config group is used to control ifremapping. Ifremapping -- provides the ability to map one port or one vlan directly to another port. -- This control is defined by creating a row in the ctIFRemap2Table -- specifying source slot, source port, destination slot, and destination -- port with ctIFRemap2Status set to a value of enable(1) or by creating -- a row in the ctIFRemap2VlanTable specifying source slot, source vlan, -- destination slot, destination port with ctIFRemap2VlanStatus set to a -- value of enable(1). -- -- When a source port is remapped to a destination port, the destination -- port will transmit out all packets received or transmitted on the -- source port. Counters on the destination port will increment for all -- packets transmitted be it by normal packet forwarding or due to -- ifremap. -- -- When a source vlan is remapped to a destination port, the destination -- port will transmit out all packets received on the source vlan. Counters -- on the destination port will increment for all packets transmitted be it -- by normal packet forwarding or due to ifremap. -- -- All tables in this MIB contain a slot instance. In the case of a -- stand-alone device the slot will always be 1. -- -- Any mention of a vlan in this text refers to a Virtual Local Area Network -- that is compliant to IEEE Draft P802.1Q/D11. -- -- The IFRemap Table -- ctIFRemap2Table OBJECT-TYPE SYNTAX SEQUENCE OF CtIFRemap2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides the ability to remap all frames from one port onto another port. A port is defined by ctIFRemap2PortIndex from the ctIFRemap2PortTable below. Only ports listed in the ctIFRemap2PortTable are available for remapping. A given source port may only be mapped to only one destination port. Once a port is reserved as part of a ctIFRemap2Table entry, it may not be used in any other ctIFRemap2Table entries (ie. If remapping port 1 to port 3, then neither port 1 or port 3 may be used as a ctIFRemap2SourcePort or ctIFRemap2DestPort in another ctIFRemap2Table entry). Each row that exists in this table defines such a relationship. By disabling a row in this table the remapping relationship no longer exists. Each entry will be referenced by slot. In the case of a stand-alone device the slot will always be 1. If a given relationship cannot be created the set will fail with a BAD-VALUE error." ::= { ctIFRemap2Config 1 } ctIFRemap2Entry OBJECT-TYPE SYNTAX CtIFRemap2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular ifremap entry." INDEX { ctIFRemap2SourceSlot, ctIFRemap2SourcePort, ctIFRemap2DestSlot, ctIFRemap2DestPort } ::= { ctIFRemap2Table 1 } CtIFRemap2Entry ::= SEQUENCE { ctIFRemap2SourceSlot INTEGER, ctIFRemap2SourcePort INTEGER, ctIFRemap2DestSlot INTEGER, ctIFRemap2DestPort INTEGER, ctIFRemap2Status INTEGER, ctIFRemap2PhysicalErrors INTEGER, ctIFRemap2EgressType INTEGER } ctIFRemap2SourceSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot combined with the ctIFRemap2SourcePort which will have all packets redirected to the destination port as defined by ctIFRemap2DestSlot and ctIFRemap2DestPort." ::= { ctIFRemap2Entry 1 } ctIFRemap2SourcePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port combined with the ctIFRemap2SourceSlot which will have all packets redirected to the destination port as defined by ctIFRemap2DestSlot and ctIFRemap2DestPort." ::= { ctIFRemap2Entry 2 } ctIFRemap2DestSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot combined with the ctIFRemap2DestPort which will see all packets redirected from ctIFRemap2SourceSlot and ctIFRemap2SourcePort." ::= { ctIFRemap2Entry 3 } ctIFRemap2DestPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port combined with the ctIFRemap2DestSlot which will see all packets redirected from ctIFRemap2SourceSlot and ctIFRemap2SourcePort." ::= { ctIFRemap2Entry 4 } ctIFRemap2Status OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the status of the ifremap entry. Setting ctIFRemap2Status to a value of enable(1) has the effect of creating an entry in the table when it does not already exist. Setting ctIFRemap2Status to a value of disable(2) disables the entry and deletes the row from the table. Therefore this table only contains entries that are active." DEFVAL { enable } ::= { ctIFRemap2Entry 5 } ctIFRemap2PhysicalErrors OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), unsupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable remapping of physical errors. This object controls whether or not frames with physical errors should be remapped out the destination port for this entry. By default, this will be enabled when an entry is created. NOTE: This action is always superseded by the value of ctIFRemap2PhysErrsCapable for either the source or destination port specified in this remap entry. If a port is not physically capable of transmitting or receiving error frames, then this object will return unsupported(3) and the value cannot be changed." DEFVAL { enable } ::= { ctIFRemap2Entry 6 } ctIFRemap2EgressType OBJECT-TYPE SYNTAX INTEGER { normal(1), alwaysTagged(2), alwaysUntagged(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines how each packet will be tagged when sent out the ctIFRemap2DestPort. Setting ctIFRemap2EgressType to normal(1) will set packets to be sent out as they are seen by ctIFRemap2SourcePort. Setting ctIFRemap2EgressType to alwaysTagged(2) will set packets to always be sent out ctIFRemap2DestSlot and ctIFRemap2DestPort with a tag. Setting ctIFRemap2EgressType to alwaysUntagged(3) will set packets to always be sent out ctIFRemap2DestSlot and ctIFRemap2DestPort without a tag. If the module is not configured to support packet tagging (i.e. 802.1d bridge mode) then setting this object to alwaysTagged(2) or alwaysUntagged(3) will return a BAD-VALUE error." DEFVAL { normal } ::= { ctIFRemap2Entry 7 } -- -- The IFRemap Port Table -- ctIFRemap2PortTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIFRemap2PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table holds all valid ports that are remappable or able to accept a remapped packet." ::= { ctIFRemap2Config 2 } ctIFRemap2PortEntry OBJECT-TYPE SYNTAX CtIFRemap2PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular supported remappable port." INDEX { ctIFRemap2PortSlot, ctIFRemap2PortIndex } ::= { ctIFRemap2PortTable 1 } CtIFRemap2PortEntry ::= SEQUENCE { ctIFRemap2PortSlot INTEGER, ctIFRemap2PortIndex INTEGER, ctIFRemap2PortReference OBJECT IDENTIFIER, ctIFRemap2PhysErrsCapable INTEGER } ctIFRemap2PortSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Defines the slot in which the remap capable module resides. In the case of a stand-alone device the slot will always be 1." ::= { ctIFRemap2PortEntry 1 } ctIFRemap2PortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Defines an port that is remappable or is able to accept a remapped packet. Ideally indices will start with 1 and will be numbered continuously through the number of available remap ports. However, this need not necessarily be the case. Indices may be sparse and begin with any number if desired for a particular implementation." ::= { ctIFRemap2PortEntry 2 } ctIFRemap2PortReference OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object returns an OID referencing an object which uniquely corresponds to this remap port. The only criteria is that this OID is a leaf, and that it exists and is accessible. For example, if remap functionality is running on an 802.1d compliant bridge, remap port #1 could reference dot1dBasePort.1. Alternatively you could reference a mib2 interface like ifIndex.1 or a Cabletron Secure Fast port. Mixing these types (some refer to bridge ports, others refer to SFS ports) is not advised, but not prohibited" ::= { ctIFRemap2PortEntry 3 } ctIFRemap2PhysErrsCapable OBJECT-TYPE SYNTAX INTEGER { supported(1), unsupported(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether the port is incapable of remapping physical errors. If the capability is supported, this object will return supported(1). If the capability is unsupported, this object will return unsupported(2)." ::= { ctIFRemap2PortEntry 4 } -- -- The IFRemap Slot Table -- ctIFRemap2SlotTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIFRemap2SlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all information pertaining to the abilities or limitations of a particular remap capable module." ::= { ctIFRemap2Config 3 } ctIFRemap2SlotEntry OBJECT-TYPE SYNTAX CtIFRemap2SlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular entry in the ctIFRemap2SlotTable. Each entry is indexed by the physical slot in which the module resides." INDEX { ctIFRemap2SlotIndex } ::= { ctIFRemap2SlotTable 1 } CtIFRemap2SlotEntry ::= SEQUENCE { ctIFRemap2SlotIndex INTEGER, ctIFRemap2SlotMaxRemaps INTEGER, ctIFRemap2SlotMaxRemoteDests INTEGER } ctIFRemap2SlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Defines the slot in which the remap capable module resides. In the case of a stand-alone device the slot will always be 1." ::= { ctIFRemap2SlotEntry 1 } ctIFRemap2SlotMaxRemaps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries allowed to be sourced from the module in this slot in the ctIFRemap2Table." ::= { ctIFRemap2SlotEntry 2 } ctIFRemap2SlotMaxRemoteDests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of remote destination ports per remote module. For example, a value of 3 means that I can have no more than 3 remap destination ports between this module, and any other given module in the same chassis simultaneously. I can have multiple source ports remapped to each of the three remote destination ports. I can also remap to up to three remote destination ports on each of the other modules in the chassis simultaneously." ::= { ctIFRemap2SlotEntry 3 } -- -- The IFRemap Vlan Table -- -- The ctIFRemap2VlanTable may only be implemented on a Cabletron Bridge -- which supports the use of IEEE Draft P802.1Q/D11 compliant vlans. -- -- The implementation of this table is OPTIONAL ctIFRemap2VlanTable OBJECT-TYPE SYNTAX SEQUENCE OF CtIFRemap2VlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides the ability to remap all frames from any port on a particular vlan to a specific destination port. Each row that exists in this table defines such a relationship. By disabling a row in this table the remapping relationship no longer exists. Multiple vlans may be mapped to a given destination port (ie. vlan 11 and vlan 35 may both remap to port 10). A port is defined by ctIFRemap2PortIndex in the ctIFRemap2PortTable, above. Only ports listed in the ctIFRemap2PortTable are available for remapping. A vlan is defined by ctVlanVID in the ctVlanConfigTable. Only vlans listed in the ctVlanConfigTable are available for remapping. Each entry will be referenced by slot. In the case of a stand-alone device the slot will always be 1. If a given relationship cannot be created the set will fail with a BAD-VALUE error." REFERENCE "ctvlan-ext-mib .4.4.1.1" ::= { ctIFRemap2Config 4 } ctIFRemap2VlanEntry OBJECT-TYPE SYNTAX CtIFRemap2VlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular ifremap Vlan entry." INDEX { ctIFRemap2VlanSourceSlot, ctIFRemap2VlanSourceVlan, ctIFRemap2VlanDestSlot, ctIFRemap2VlanDestPort } ::= { ctIFRemap2VlanTable 1 } CtIFRemap2VlanEntry ::= SEQUENCE { ctIFRemap2VlanSourceSlot INTEGER, ctIFRemap2VlanSourceVlan INTEGER, ctIFRemap2VlanDestSlot INTEGER, ctIFRemap2VlanDestPort INTEGER, ctIFRemap2VlanStatus INTEGER, ctIFRemap2VlanEgressType INTEGER } ctIFRemap2VlanSourceSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot combined with the ctIFRemap2VlanSourceVlan which will have all packets redirected to the destination port as defined by ctIFRemap2VlanDestSlot and ctIFRemap2VlanDestPort." ::= { ctIFRemap2VlanEntry 1 } ctIFRemap2VlanSourceVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The vlan combined with the ctIFRemap2VlanSourceSlot which will have all packets redirected to the destination port as defined by ctIFRemap2VlanDestSlot and ctIFRemap2VlanDestPort." ::= { ctIFRemap2VlanEntry 2 } ctIFRemap2VlanDestSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot combined with the ctIFRemap2VlanDestPort which will see all packets redirected from ctIFRemap2VlanSourceSlot and ctIFRemap2VlanSourceVlan." ::= { ctIFRemap2VlanEntry 3 } ctIFRemap2VlanDestPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port combined with the ctIFRemap2VlanDestSlot which will see all packets redirected from ctIFRemap2VlanSourceSlot and ctIFRemap2VlanSourceVlan." ::= { ctIFRemap2VlanEntry 4 } ctIFRemap2VlanStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the status of the ifremap vlan entry. Setting ctIFRemap2VlanStatus to a value of enable(1) has the effect of creating an entry in the table when it does not already exist. Setting ctIFRemap2VlanStatus to a value of disable(2) disables the entry and deletes the row from the table. Therefore this table only contains entries that are active. If ctIFRemap2VlanSourceVlan is already being used by another ctIfRemap2Vlan entry or ctifRemap2 Entry then a set to ctIFRemap2VlanStatus of value enable(1) will return with a BAD-VALUE error." DEFVAL { enable } ::= { ctIFRemap2VlanEntry 5 } ctIFRemap2VlanEgressType OBJECT-TYPE SYNTAX INTEGER { received(1), alwaysTagged(2), alwaysUntagged(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines how each packet will be tagged when sent out the ctIFRemap2VlanDestPort. Setting ctIFRemap2VlanEgressType to received(1) will set packets to be sent out ctIFRemap2VlanDestSlot and ctIFRemap2VlanDestPort exactly as they are received by ctIFRemap2VlanSourceVlan. Setting ctIFRemap2VlanEgressType to alwaysTagged(2) will set packets to be sent out ctIFRemap2VlanDestSlot and ctIFRemap2VlanDestPort with the vlan tag associated with ctIFRemap2VlanSourceVlan. If this port does not have a vlan tag associated with it then all packets will be remapped without a tag. Setting ctIFRemap2VlanEgressType to alwaysUntagged(3) will set packets to be sent out ctIFRemap2VlanDestSlot and ctIFRemap2VlanDestPort without any tag reguardless of ctIFRemap2VlanSourceVlan's tagging status." DEFVAL { received } ::= { ctIFRemap2VlanEntry 6 } END