CTRON-SFPS-COMMON-MIB CTRON-SFPS-COMMON-MIB DEFINITIONS ::= BEGIN -- sfps-common-mib.txt -- Revision: 0.0.13 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise specific Fast Packet Switching Services MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 93 Cabletron Systems -- IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB -- enterprises, -- IpAddress, -- Counter, Gauge, -- TimeTicks -- FROM RFC1155-SMI -- These Objects are defined in the file sfps-inc.mib.txt.0.0.2 sfpsSystemGenerics, sfpsDiagEventLog, sfpsAOProperties, sfpsAOPropertiesAPI FROM CTRON-SFPS-INCLUDE-MIB; -- Textual Conventions HexInteger ::= INTEGER -- display this integer in hex format -- SFPS Switch Generics Group sfpsGenericVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsGenericVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table describing the SFS generics and their versions that are contained within this image." ::= { sfpsSystemGenerics 1 } sfpsGenericVersionEntry OBJECT-TYPE SYNTAX SfpsGenericVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table instanced by the Generic name." INDEX { sfpsGenericVersionHash } ::= { sfpsGenericVersionTable 1 } SfpsGenericVersionEntry ::= SEQUENCE { sfpsGenericVersionHash INTEGER, sfpsGenericVersionName DisplayString, sfpsGenericVersionVersion DisplayString, sfpsGenericVersionMIBRev DisplayString } sfpsGenericVersionHash OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hash of the name to make it a unique entry." ::= { sfpsGenericVersionEntry 1 } sfpsGenericVersionName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of the Generic." ::= { sfpsGenericVersionEntry 2 } sfpsGenericVersionVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Version stamp of the generic component." ::= { sfpsGenericVersionEntry 3 } sfpsGenericVersionMIBRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "MIB version of the generic component." ::= { sfpsGenericVersionEntry 4 } -- SFPS Diagnostics Group (Experiment) -- This group contains the objects that pertain to the SFPS Diagnostics group. -- SFPS Diagnostic Event Logger Groups (Experiment) -- This group contains the objects that pertain to the Event Logger -- of the Diagnostics group. sfpsDiagLogConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsDiagLogConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the informtion to configure an Event Logger object." ::= { sfpsDiagEventLog 1 } sfpsDiagLogConfigEntry OBJECT-TYPE SYNTAX SfpsDiagLogConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains configuration data." INDEX { sfpsDiagLogConfigInstance } ::= { sfpsDiagLogConfigTable 1 } SfpsDiagLogConfigEntry ::= SEQUENCE { sfpsDiagLogConfigInstance INTEGER, sfpsDiagLogConfigStatus INTEGER, sfpsDiagLogConfigIndex INTEGER, sfpsDiagLogConfigStart INTEGER, sfpsDiagLogConfigStop INTEGER, sfpsDiagLogConfigLogIndex INTEGER, sfpsDiagLogConfigFilterMatch INTEGER, sfpsDiagLogConfigFilterStart INTEGER, sfpsDiagLogConfigFilterStop INTEGER, sfpsDiagLogAccessPortControl HexInteger, sfpsDiagLogCallIdleTime INTEGER, sfpsDiagLogFilterAddTimer INTEGER, sfpsDiagLogRedirectorWakeup INTEGER, sfpsDiagLogRedirectorNumPackets INTEGER, sfpsDiagLogEndSystemTimeout INTEGER, sfpsDiagLogSwitchIdleInterval INTEGER, sfpsDiagLogInlnFltrAgeTime INTEGER, sfpsDiagLogConfigDebug9 INTEGER, sfpsDiagLogSignalThrottle INTEGER, sfpsDiagLogConfigOther INTEGER, sfpsDiagLogConfigSoftReset INTEGER, sfpsDiagLogConfigSFPSVlan INTEGER } sfpsDiagLogConfigInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The instance of this Event Logger." ::= { sfpsDiagLogConfigEntry 1 } sfpsDiagLogConfigStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this Event Logger object." ::= { sfpsDiagLogConfigEntry 2 } sfpsDiagLogConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current index in the circular buffer where events are being logged." ::= { sfpsDiagLogConfigEntry 3 } sfpsDiagLogConfigStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The starting index in the circular buffer to display." ::= { sfpsDiagLogConfigEntry 4 } sfpsDiagLogConfigStop OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The last index in the circular buffer to display." ::= { sfpsDiagLogConfigEntry 5 } sfpsDiagLogConfigLogIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The current index in the log buffer where we are looking." ::= { sfpsDiagLogConfigEntry 6 } sfpsDiagLogConfigFilterMatch OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The specified Event Id to log. A value of 0 will cause every event to be logged." ::= { sfpsDiagLogConfigEntry 7 } sfpsDiagLogConfigFilterStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The beginning range of Event Ids to log." ::= { sfpsDiagLogConfigEntry 8 } sfpsDiagLogConfigFilterStop OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ending range of Event Ids to log." ::= { sfpsDiagLogConfigEntry 9 } sfpsDiagLogAccessPortControl OBJECT-TYPE SYNTAX HexInteger ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set a port bit mask. This bit mask represents which ports shall be statically set to be an ACCESS port. Bit 0 corresponds to Port 1." DEFVAL { 0 } ::= { sfpsDiagLogConfigEntry 10 } sfpsDiagLogCallIdleTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set a debug variable. (in seconds)" DEFVAL { 60 } ::= { sfpsDiagLogConfigEntry 11 } sfpsDiagLogFilterAddTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set how long a filter connection should be (Default : 900 seconds)" DEFVAL { 900 } ::= { sfpsDiagLogConfigEntry 12 } sfpsDiagLogRedirectorWakeup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set how often the Redirector wakes up to service the queue (in seconds)" ::= { sfpsDiagLogConfigEntry 13 } sfpsDiagLogRedirectorNumPackets OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set how many packets the Redirector reads off at a time." DEFVAL { 64 } ::= { sfpsDiagLogConfigEntry 14 } sfpsDiagLogEndSystemTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set a debug variable. (Default : 10 minutes) (in seconds)" DEFVAL { 600 } ::= { sfpsDiagLogConfigEntry 15 } sfpsDiagLogSwitchIdleInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set a debug variable. (in seconds)" DEFVAL { 30 } ::= { sfpsDiagLogConfigEntry 16 } sfpsDiagLogInlnFltrAgeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set the BAF age time (seconds)." ::= { sfpsDiagLogConfigEntry 17 } sfpsDiagLogConfigDebug9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set a debug variable." ::= { sfpsDiagLogConfigEntry 18 } sfpsDiagLogSignalThrottle OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Leaf to be used to set the Signal Thottle knob. Throttling defaults to off. By setting it to 1,2,5, or 10 one can dictate the rate (signal/second) at which SFPS sends signals to the ACMS Signal Stack.." ::= { sfpsDiagLogConfigEntry 19 } sfpsDiagLogConfigOther OBJECT-TYPE SYNTAX INTEGER { string(1), integer(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Dictates the format of the Event to be displayed (either Text or Integer values)." ::= { sfpsDiagLogConfigEntry 20 } sfpsDiagLogConfigSoftReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsDiagLogConfigEntry 21 } sfpsDiagLogConfigSFPSVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsDiagLogConfigEntry 22 } -- AO Properties Table sfpsAOPropertiesTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsAOPropertiesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sfpsAOProperties 1 } sfpsAOPropertiesEntry OBJECT-TYPE SYNTAX SfpsAOPropertiesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table instanced by the tag." INDEX { sfpsAOPropertiesTag } ::= { sfpsAOPropertiesTable 1 } SfpsAOPropertiesEntry ::= SEQUENCE { sfpsAOPropertiesTag INTEGER, sfpsAOPropertiesTagDescriptor OCTET STRING, sfpsAOPropertiesPrettyType OCTET STRING, sfpsAOPropertiesNumBytes INTEGER, sfpsAOPropertiesIsLimit INTEGER, sfpsAOPropertiesIsMobile INTEGER, sfpsAOPropertiesIsSingle INTEGER, sfpsAOPropertiesNoBlock INTEGER, sfpsAOPropertiesNoDelta INTEGER } sfpsAOPropertiesTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 1 } sfpsAOPropertiesTagDescriptor OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 2 } sfpsAOPropertiesPrettyType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 3 } sfpsAOPropertiesNumBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 4 } sfpsAOPropertiesIsLimit OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 5 } sfpsAOPropertiesIsMobile OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 6 } sfpsAOPropertiesIsSingle OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 7 } sfpsAOPropertiesNoBlock OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 8 } sfpsAOPropertiesNoDelta OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesEntry 9 } -- AO Properties API sfpsAOPropertiesAPITag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 1 } sfpsAOPropertiesAPITagString OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 2 } sfpsAOPropertiesAPIPrettyType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 3 } sfpsAOPropertiesAPINumBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 4 } sfpsAOPropertiesAPIIsLimit OBJECT-TYPE SYNTAX INTEGER { notSet(1), false(2), true(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 5 } sfpsAOPropertiesAPIIsMobile OBJECT-TYPE SYNTAX INTEGER { notSet(1), false(2), true(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 6 } sfpsAOPropertiesAPIIsSingle OBJECT-TYPE SYNTAX INTEGER { notSet(1), false(2), true(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 7 } sfpsAOPropertiesAPINoBlock OBJECT-TYPE SYNTAX INTEGER { notSet(1), false(2), true(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 8 } sfpsAOPropertiesAPINoDelta OBJECT-TYPE SYNTAX INTEGER { notSet(1), false(2), true(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 9 } sfpsAOPropertiesAPIAction OBJECT-TYPE SYNTAX INTEGER { readProperties(1), setProperties(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sfpsAOPropertiesAPI 10 } END