CTTRAPLOG-MIB CTTRAPLOG-MIB DEFINITIONS ::= BEGIN -- cttraplog-mib.txt -- Revision: 01.00.02 -- Part Number: -- Date: July 17, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific trap log mib. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright July 1998 Cabletron Systems -- PLEASE NOTE: All groups in this mib are optional IMPORTS DisplayString FROM RFC1213-MIB Counter, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ctTrapLog FROM CTRON-MIB-NAMES; totalNumberOfEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of logged entries for this chassis." ::= { ctTrapLog 1 } configTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfigTableEntry ACCESS not-accessible STATUS mandatory ::= { ctTrapLog 2 } configTableEntry OBJECT-TYPE SYNTAX ConfigTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry allows a user to configure the alarm table for a specific slot. Objects such as Current Entry, MaxEntries Allowed, and an Enable/Disable switch are available." INDEX { slotInChassis } ::= { configTable 1 } ConfigTableEntry ::= SEQUENCE { slotInChassis INTEGER, numEntriesLoggeds Counter, numEntriesRequested INTEGER, numEntriesAllocated INTEGER, lastLoggedEntryLogId INTEGER, logCommand INTEGER, wrap INTEGER } slotInChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Each Slot can be separately configured. This is the slot number for the configuration entry. " ::= { configTableEntry 1 } numEntriesLoggeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the total number of entries looged for this slot." ::= { configTableEntry 2 } numEntriesRequested OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of entries to store before wrapping the log on this slot." ::= { configTableEntry 3 } numEntriesAllocated OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of entries allocated to log alarms on this slot. It will always be less than or equal to the requested number of entries." ::= { configTableEntry 4 } lastLoggedEntryLogId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the log id of the last entry logged for this slot." ::= { configTableEntry 5 } logCommand OBJECT-TYPE SYNTAX INTEGER { clearLog (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows the user to send the log the commands specified in the enumeration." ::= { configTableEntry 6 } wrap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is whether or not this configuration has wrapped or not." ::= { configTableEntry 7 } trapLogTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapLogEntry ACCESS not-accessible STATUS mandatory ::= { ctTrapLog 3 } trapLogEntry OBJECT-TYPE SYNTAX TrapLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each alarm entry is generated from one of the following sources; (1) a module in one of the main chassis slots, (2) the EM, (3) or a power supply. " INDEX { slotChassis, logId } ::= { trapLogTable 1 } TrapLogEntry ::= SEQUENCE { logId INTEGER, nvmpId INTEGER, trapLogAcknowledged INTEGER, trapLogVarBind OCTET STRING, trapLogDescription DisplayString, timeLogged TimeTicks, filterId INTEGER, slotChassis INTEGER, trapOID OBJECT IDENTIFIER, z80Time TimeTicks } logId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Each slot has a maximium number of log entries that it can support. Each entry is assigned a monotonically increasing sequence number. When the maximum number of entries for a slot is reached, the log wraps. Each new entry will replace the oldest entry for that slot." ::= { trapLogEntry 1 } nvmpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This contains the nvmp id of the trap that occurred." ::= { trapLogEntry 2 } trapLogAcknowledged OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is set to 2 if a trap as been acknowledged from the EM." ::= { trapLogEntry 3 } trapLogVarBind OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1500)) ACCESS read-only STATUS mandatory DESCRIPTION "This is an ASN.1 encoded string representing the pairs of OID/value items supplied in the original SNMP or NVMP trap. " ::= { trapLogEntry 4 } trapLogDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "This is an internally defined string used to describe an alarm. Its primary use is for display on the EMs LCD. A default value will be used for the old trap calls." ::= { trapLogEntry 5 } timeLogged OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time the entry was logged. This will be date and time if possible." ::= { trapLogEntry 6 } filterId OBJECT-TYPE SYNTAX INTEGER { informational (1), warning (2), severe (3), fatal (4), existing (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This will be used to filter certain alarms. The criteria is TBD. An example of classification: informational - requires no intervention. warning - Does not require immediate intervention. e.g. static risk severe - Requires immediate intervention. e.g. power overload. fatal - Requires attention and module may take corrective action such as reboot. e.g. Unrecoverable software or hardware error. " ::= { trapLogEntry 7 } slotChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot of this trap log." ::= { trapLogEntry 8 } trapOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This OID combines the General Trap code, Specific Trap code, and the sys object id into one OID." ::= { trapLogEntry 9 } z80Time OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This is the time that the Z80 has been up for the board that sent this trap." ::= { trapLogEntry 10 } filterTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterEntry ACCESS not-accessible STATUS mandatory ::= { ctTrapLog 4 } filterEntry OBJECT-TYPE SYNTAX FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each filter entry is generated from one of the following sources; (1) a module in one of the main chassis slots, (2) the EM, (3) or a power supply. " INDEX { filterSlotInChassis, filterFilterId, filterLogId } ::= { filterTable 1 } FilterEntry ::= SEQUENCE { filterLogId INTEGER, filterNvmpId INTEGER, filterTrapLogAcknowledged INTEGER, filterTrapLogVarBind OCTET STRING, filterTrapLogDescription DisplayString, filterTimeLogged TimeTicks, filterFilterId INTEGER, filterSlotInChassis INTEGER, filterTrapOID OBJECT IDENTIFIER, filterZ80Time TimeTicks } filterLogId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Each slot has a maximum number of log entries that it can support. Each entry is assigned a monotonically increasing sequence number. When the maximum number of entries for a slot is reached, the log wraps. Each new entry willreplace the oldest entry for that slot." ::= { filterEntry 1 } filterNvmpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This contains the nvmp id of the trap that was generated." ::= { filterEntry 2 } filterTrapLogAcknowledged OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is non-zero if a trap has been acknowleged from the EM." ::= { filterEntry 3 } filterTrapLogVarBind OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1500)) ACCESS read-only STATUS mandatory DESCRIPTION "This is an ASN.1 encoded string representing the pairs of OID/value items supplied in the original SNMP or NVMP trap." ::= { filterEntry 4 } filterTrapLogDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "This is an internally defined string used to describe an alarm. It's primary use is for display on the EMs LCD. A default value will be used for the old trap calls." ::= { filterEntry 5 } filterTimeLogged OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time the entry was logged. This will be date and time if possible." ::= { filterEntry 6 } filterFilterId OBJECT-TYPE SYNTAX INTEGER { informational (1), warning (2), severe (3), fatal (4), existing (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This will be used tofilter certain alarms. The criteria is TBD. An example of classification: informational-requires no intervention. warning - Does not require immediate intervention. e.g. statis risk severe - Requires immediate intervention. e.g. power overload. fatal - Requires attention and module may take corrective action such as reboot. e.g. Unrecoverale software or hardware error." ::= { filterEntry 7 } filterSlotInChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot of this filter entry." ::= { filterEntry 8 } filterTrapOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This OID combines the General Trap code, Specific Trap code, and the sys object id into one OID." ::= { filterEntry 9 } filterZ80Time OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The number of time ticks that have passed since this boards Z80 processor has been up." ::= { filterEntry 10 } trapLoggerAgent OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), standby(3), elected(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Reflects the operational status of the traplogger agent" ::= { ctTrapLog 5 } END