H225-MIB H225-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Integer32, Unsigned32, NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TAddress, DateAndTime FROM SNMPv2-TC ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MmTAddressTag, mmH323Root, MmGlobalIdentifier, MmAliasTag, MmAliasAddress, MmH323EndpointType, MmH225Crv, MmCallType FROM MULTI-MEDIA-MIB-TC; h225CallSignaling MODULE-IDENTITY LAST-UPDATED "9812221200Z" -- December 14, 1998 ORGANIZATION " ITU-T SG 16 " CONTACT-INFO " ITU-T SG 16 " DESCRIPTION "The MIB Module supports the functions of a H.225 call signaling ." REVISION "9812141200Z" DESCRIPTION "The initial version of the mib." ::= { mmH323Root 1} -- groups in h225 callSignalConfig OBJECT IDENTIFIER ::= { h225CallSignaling 1 } callSignalStats OBJECT IDENTIFIER ::= { h225CallSignaling 2 } connections OBJECT IDENTIFIER ::= { h225CallSignaling 3 } callSignalEvents OBJECT IDENTIFIER ::= { h225CallSignaling 4 0 } callSignalingMIBConformance OBJECT IDENTIFIER ::= { h225CallSignaling 5 } callSignalConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CallSignalConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration information for instances of a call signaling protocol." ::= { callSignalConfig 1} callSignalConfigEntry OBJECT-TYPE SYNTAX CallSignalConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It contains objects that describe the configuration." INDEX { ifIndex } ::= { callSignalConfigTable 1 } CallSignalConfigEntry::= SEQUENCE { callSignalConfigMaxConnections Integer32, callSignalConfigAvailableConnections Integer32, callSignalConfigT303 Integer32, callSignalConfigT301 Integer32, callSignalConfigEnableNotifications INTEGER } callSignalConfigMaxConnections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of connections the H.225 entity can possibly have." ::= { callSignalConfigEntry 1 } callSignalConfigAvailableConnections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of available connections, out of callSignalConfigMaxConnections." ::= { callSignalConfigEntry 2 } callSignalConfigT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time the calling endpoint waits for an ALERTING, CALL PROCEEDING, CONNECT, RELEASE COMPLETE or other message the called endpoint after it has sent a SETUP message. The time value is in seconds. " ::= { callSignalConfigEntry 3 } callSignalConfigT301 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time after which the calling endpoint should stop waiting for the called endpoint to respond. The time value is in seconds. " ::= { callSignalConfigEntry 4 } callSignalConfigEnableNotifications OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether notifications should be generated from this MIB. The default is disabled." ::= { callSignalConfigEntry 5} -- -- Statistics -- callSignalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CallSignalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information for instances of a call signaling protocol." ::= { callSignalStats 1} callSignalStatsEntry OBJECT-TYPE SYNTAX CallSignalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It contains objects that describe statistics." INDEX { ifIndex } ::= { callSignalStatsTable 1 } CallSignalStatsEntry::= SEQUENCE { callSignalStatsCallConnections Counter32, callSignalStatsAlertingMsgs Counter32, callSignalStatsCallProceedings Counter32, callSignalStatsSetupMsgs Counter32, callSignalStatsSetupAckMsgs Counter32, callSignalStatsProgressMsgs Counter32, callSignalStatsReleaseCompleteMsgs Counter32, callSignalStatsStatusMsgs Counter32, callSignalStatsStatusInquiryMsgs Counter32, callSignalStatsFacilityMsgs Counter32, callSignalStatsInfoMsgs Counter32, callSignalStatsNotifyMsgs Counter32, callSignalStatsAverageCallDuration Integer32 } callSignalStatsCallConnectionsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful connections in which this entity has been a callee." ::= { callSignalStatsEntry 1 } callSignalStatsCallConnectionsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful connections in which this entity has been a caller." ::= { callSignalStatsEntry 2 } callSignalStatsAlertingMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alerting messages received by this entity." ::= { callSignalStatsEntry 3 } callSignalStatsAlertingMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alerting messages sent by this entity." ::= { callSignalStatsEntry 4 } callSignalStatsCallProceedingsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of call proceeding messages received by this entity." ::= { callSignalStatsEntry 5 } callSignalStatsCallProceedingsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of call proceeding messages sent by this entity." ::= { callSignalStatsEntry 6 } callSignalStatsSetupMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setup messages received by this entity." ::= { callSignalStatsEntry 7 } callSignalStatsSetupMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setup messages sent by this entity." ::= { callSignalStatsEntry 8 } callSignalStatsSetupAckMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setupAck messages received by this entity." ::= { callSignalStatsEntry 9 } callSignalStatsSetupAckMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setupAck messages sent by this entity." ::= { callSignalStatsEntry 10 } callSignalStatsProgressMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of progress messages received by this entity." ::= { callSignalStatsEntry 11 } callSignalStatsProgressMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of progress messages sent by this entity." ::= { callSignalStatsEntry 12 } callSignalStatsReleaseCompleteMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release complete messages received by this entity." ::= { callSignalStatsEntry 13 } callSignalStatsReleaseCompleteMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release complete messages sent by this entity." ::= { callSignalStatsEntry 14 } callSignalStatsStatusMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status messages received by this entity." ::= { callSignalStatsEntry 15 } callSignalStatsStatusMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status messages sent by this entity." ::= { callSignalStatsEntry 16 } callSignalStatsStatusInquiryMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status inquiry messages received by this entity." ::= { callSignalStatsEntry 17 } callSignalStatsStatusInquiryMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status inquiry messages sent by this entity." ::= { callSignalStatsEntry 18 } callSignalStatsFacilityMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect messages received by this entity." ::= { callSignalStatsEntry 19 } callSignalStatsFacilityMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect messages sent by this entity." ::= { callSignalStatsEntry 20 } callSignalStatsInfoMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of info messages received by this entity." ::= { callSignalStatsEntry 21 } callSignalStatsInfoMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of info messages sent by this entity." ::= { callSignalStatsEntry 22 } callSignalStatsNotifyMsgsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of notify messages received by this entity." ::= { callSignalStatsEntry 23 } callSignalStatsNotifyMsgsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of notify messages sent by this entity." ::= { callSignalStatsEntry 24 } callSignalStatsAverageCallDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average duration of the call in minutes since system boot time. " ::= { callSignalStatsEntry 25 } connectionsActiveConnections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active connections." ::= { connections 1 } connectionsTable OBJECT-TYPE SYNTAX SEQUENCE OF ConnectionsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about entities that are connected to this entity. It is a list of connection entries. The number of entries equals to the number of active connections." ::= { connections 2 } connectionsTableEntry OBJECT-TYPE SYNTAX ConnectionsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It contains objects that describe connections that are remotely connected to this callable H.323 entity for a conference." INDEX { ifIndex, connectionsSrcTransporTAddressTag, connectionsSrcTransporTAddress, connectionsCallIdentifier} ::= { connectionsTable 1 } ConnectionsTableEntry ::= SEQUENCE { connectionsSrcTransporTAddressTag MmTAddressTag, connectionsSrcTransporTAddress TAddress, connectionsCallIdentifier MmGlobalIdentifier, connectionsRole INTEGER, connectionsState INTEGER, connectionsDestTransporTAddressTag MmTAddressTag, connectionsDestTransporTAddress TAddress, connectionsDestAliasTag MmAliasTag, connectionsDestAlias MmAliasAddress, connectionsSrcH245SigTransporTAddressTag MmTAddressTag, connectionsSrcH245SigTransporTAddress TAddress, connectionsDestH245SigTransporTAddressTag MmTAddressTag, connectionsDestH245SigTransporTAddress TAddress, connectionsConfId MmGlobalIdentifier, connectionsCalledPartyNumber DisplayString, connectionsDestXtraCallingNumber1 DisplayString, connectionsDestXtraCallingNumber2 DisplayString, connectionsDestXtraCallingNumber3 DisplayString, connectionsDestXtraCallingNumber4 DisplayString, connectionsDestXtraCallingNumber5 DisplayString, connectionsFastCall INTEGER, connectionsSecurity INTEGER, connectionsH245Tunneling INTEGER, connectionsCanOverlapSend INTEGER, connectionsCRV MmH225Crv, connectionsCallType MmCallType, connectionsRemoteExtensionAddress OCTET STRING, connectionsExtraCRV1 MmH225Crv, connectionsExtraCRV2 MmH225Crv, connectionsConnectionStartTime DateAndTime, connectionsEndpointType MmH323EndpointType, connectionsReleaseCompleteReason INTEGER } connectionsSrcTransporTAddressTag OBJECT-TYPE SYNTAX MmTAddressTag MAX-ACCESS not-accessible STATUS current DESCRIPTION "The transport address tag of the endpoint." ::= { connectionsTableEntry 1 } connectionsSrcTransporTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The transport address of the source endpoint that initiated the connection." ::= { connectionsTableEntry 2 } connectionsCallIdentifier OBJECT-TYPE SYNTAX MmGlobalIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The call identifier." ::= { connectionsTableEntry 3 } connectionsRole OBJECT-TYPE SYNTAX INTEGER { caller(1), callee(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "This value reflects the role this entity plays in this connection being either a caller or a callee. " ::= { connectionsTableEntry 4 } connectionsState OBJECT-TYPE SYNTAX INTEGER { callInitiated (1), callDelivered (2), callPresent (3), callReceived (4), connectRequest (5), callProceeding (6), active (7),disconnectRequest (8), disconnectIndication (9), releaseRequest (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the H.225 state machine as per Q.931. Outgoing calls: callInitiated - when the user requests call establishment from the network callDelivered - when the calling user has received an indication that remote user alerting has been initiated. Incoming calls: callPresent - when the user has received a call establishment but not yet responded. callReceived - when the user has indicated alerting but not yet answered. connectRequest - when the user has answered the call and is waiting to be awarded the call. Incoming/Outgoing: callProceeding - when the user has received/sent acknowledgement that the network has received all call information necessary to effect call establishment. active - when the user has received/sent an acknoledgement from/to the network that the user has been awarded the call. disconnectRequest - when the user has requested the network to clear the end-to-end connection. disconnectIndication - when the user has received an invitation to disconnect to disconnect because the network has disconnected the end-to-end connection. releaseRequest - when the user has requested the network to release and is waiting for a responce." ::= { connectionsTableEntry 5 } connectionsDestTransporTAddressTag OBJECT-TYPE SYNTAX MmTAddressTag MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address tag of the endpoint." ::= { connectionsTableEntry 6 } connectionsDestTransporTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address of the destination endpoint." ::= { connectionsTableEntry 7 } connectionsDestAliasTag OBJECT-TYPE SYNTAX MmAliasTag MAX-ACCESS read-only STATUS current DESCRIPTION "The alias tag of the registred endpoint." ::= {connectionsTableEntry 8 } connectionsDestAlias OBJECT-TYPE SYNTAX MmAliasAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The transport port of the destination endpoint. " ::= { connectionsTableEntry 9 } connectionsSrcH245SigTransporTAddressTag OBJECT-TYPE SYNTAX MmTAddressTag MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address tag of the endpoint." ::= { connectionsTableEntry 10 } connectionsSrcH245SigTransporTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The H245 IP address of the source endpoint. " ::= { connectionsTableEntry 11 } connectionsDestH245SigTransporTAddressTag OBJECT-TYPE SYNTAX MmTAddressTag MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address tag of the endpoint." ::= { connectionsTableEntry 12 } connectionsDestH245SigTransporTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address of the destination endpoint. " ::= { connectionsTableEntry 13 } connectionsConfId OBJECT-TYPE SYNTAX MmGlobalIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The conference id for this connection. " ::= { connectionsTableEntry 14 } connectionsCalledPartyNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The primary e164 address of the destination endpoint. " ::= { connectionsTableEntry 15 } connectionsDestXtraCallingNumber1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary info e164 address of the destination endpoint. " ::= { connectionsTableEntry 16 } connectionsDestXtraCallingNumber2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The third info e164 address of the destination endpoint. " ::= { connectionsTableEntry 17 } connectionsDestXtraCallingNumber3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The fourth info e164 address of the destination endpoint." ::= { connectionsTableEntry 18 } connectionsDestXtraCallingNumber4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The fifth info e164 address of the destination endpoint." ::= { connectionsTableEntry 19 } connectionsDestXtraCallingNumber5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The sixth info e164 address of the destination endpoint. " ::= { connectionsTableEntry 20 } connectionsFastCall OBJECT-TYPE SYNTAX INTEGER { true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of fast call usage for this connection." ::= { connectionsTableEntry 21 } connectionsSecurity OBJECT-TYPE SYNTAX INTEGER {true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of encryption usage for this connection. " ::= { connectionsTableEntry 22 } connectionsH245Tunneling OBJECT-TYPE SYNTAX INTEGER { notSupported(1), available(2), active(3), closing(4), closed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of H245 tunneling usage for this connection. " ::= { connectionsTableEntry 23 } connectionsCanOverlapSend OBJECT-TYPE SYNTAX INTEGER {true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of canOverLap usage for this connection. " ::= { connectionsTableEntry 24 } connectionsCRV OBJECT-TYPE SYNTAX MmH225Crv MAX-ACCESS read-only STATUS current DESCRIPTION "The call reference value." ::= { connectionsTableEntry 25 } connectionsCallType OBJECT-TYPE SYNTAX MmCallType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the call for this connection. " ::= { connectionsTableEntry 26 } connectionsRemoteExtensionAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The additional address for GW-GW calls " ::= { connectionsTableEntry 27 } connectionsExtraCRV1 OBJECT-TYPE SYNTAX MmH225Crv MAX-ACCESS read-only STATUS current DESCRIPTION "The additional call reference value." ::= { connectionsTableEntry 28 } connectionsExtraCRV2 OBJECT-TYPE SYNTAX MmH225Crv MAX-ACCESS read-only STATUS current DESCRIPTION "The additional call reference value. " ::= { connectionsTableEntry 29 } connectionsConnectionStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of the start of this call. " ::= { connectionsTableEntry 30 } connectionsEndpointType OBJECT-TYPE SYNTAX MmH323EndpointType MAX-ACCESS read-only STATUS current DESCRIPTION "Terminal type represents the type of H.323 terminal: 50 - terminal without MC 60 - gateway without MC 70 - terminal with MC but without MP 80 - gateway with MC but without MP 120 - gatekeeper with MC but without MP 160 - MCU with MC but without MP 90 - gateway with MC and Data MP 130 - gatekeeper with MC and Data MP 170 - MCU with MC and Data MP 100 - gateway containing MC with Data and audio MP 140 - gatekeeper containing MC with Data and audio MP 180 - MCU containing MC with Data and audio MP 110 - gateway containing MC with Data, Audio and Video MP 150 - gatekeeper containing MC with Data, Audio and Video MP 190 - MCU containing MC with Data, Audio and Video MP 240 - entity with active MC . " ::= { connectionsTableEntry 31 } connectionsReleaseCompleteReason OBJECT-TYPE SYNTAX INTEGER { noBandwidth(34), gatekeeperResourcesUnavailable(47), unreachableDestination(3), destinationReject(16), invalidRevision(88), noPermission(111), unreachableGatekeeper(38), gatewayResources(42), badFormaTAddress(28), adaptiveBusy(41), inConference(17), undefined(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of the start of this call. " ::= { connectionsTableEntry 32 } callReleaseComplete NOTIFICATION-TYPE OBJECTS { ifIndex, connectionsReleaseCompleteReason } STATUS current DESCRIPTION "This message will be sent in the case of on generation and reception of releaseComplete for the following reasons: 34 - noBandwidth; no circuit/channel available 47 - gatekeeperResources; resource unavailable 3 - unreachableDestination; no route to destination 16 - destinationReject; destination did not accept this call 88 - invalidRevision; incompatible destination 111- noPermission; Interworking unspecified 38 - unreachableGatekeeper; network out of order 42 - gatewayResources; switching equipment congestion 28 - badFormaTAddress; invalid number format 41 - adaptiveBusy; Temporary Failure 17 - inConference; user busy 31 - undefined. " ::= {callSignalEvents 1} -- CONFORMANCE -- callSignalingMIBGroups OBJECT IDENTIFIER ::= { callSignalingMIBConformance 1 } -- -- Groups for Conformance -- callSignalConfigGroup OBJECT-GROUP OBJECTS { callSignalConfigMaxConnections, callSignalConfigAvailableConnections, callSignalConfigT303, callSignalConfigT301, callSignalConfigEnableNotifications } STATUS current DESCRIPTION "." ::= { callSignalingMIBGroups 1 } callSignalStatsGroup OBJECT-GROUP OBJECTS { callSignalStatsCallConnectionsIn, callSignalStatsCallConnectionsOut, callSignalStatsAlertingMsgsIn, callSignalStatsAlertingMsgsOut, callSignalStatsCallProceedingsIn, callSignalStatsCallProceedingsOut, callSignalStatsSetupMsgsIn, callSignalStatsSetupMsgsOut, callSignalStatsSetupAckMsgsIn, callSignalStatsSetupAckMsgsOut, callSignalStatsProgressMsgsIn, callSignalStatsProgressMsgsOut, callSignalStatsReleaseCompleteMsgsIn, callSignalStatsReleaseCompleteMsgsOut, callSignalStatsStatusMsgsIn, callSignalStatsStatusMsgsOut, callSignalStatsStatusInquiryMsgsIn, callSignalStatsStatusInquiryMsgsOut, callSignalStatsFacilityMsgsIn, callSignalStatsFacilityMsgsOut, callSignalStatsInfoMsgsIn, callSignalStatsInfoMsgsOut, callSignalStatsNotifyMsgsIn, callSignalStatsNotifyMsgsOut, callSignalStatsAverageCallDuration } STATUS current DESCRIPTION "." ::= { callSignalingMIBGroups 2 } connectionsGroup OBJECT-GROUP OBJECTS { connectionsActiveConnections, connectionsRole, connectionsState, connectionsDestTransporTAddressTag, connectionsDestTransporTAddress, connectionsDestAliasTag, connectionsDestAlias, connectionsSrcH245SigTransporTAddressTag, connectionsSrcH245SigTransporTAddress, connectionsDestH245SigTransporTAddressTag, connectionsDestH245SigTransporTAddress, connectionsConfId, connectionsCalledPartyNumber, connectionsDestXtraCallingNumber1, connectionsDestXtraCallingNumber2, connectionsDestXtraCallingNumber3, connectionsDestXtraCallingNumber4, connectionsDestXtraCallingNumber5, connectionsFastCall, connectionsSecurity, connectionsH245Tunneling, connectionsCanOverlapSend, connectionsCRV, connectionsCallType, connectionsRemoteExtensionAddress, connectionsExtraCRV1, connectionsExtraCRV2, connectionsConnectionStartTime, connectionsReleaseCompleteReason } STATUS current DESCRIPTION "." ::= { callSignalingMIBGroups 3 } callSignalEventsGroup OBJECT-GROUP OBJECTS { connectionsReleaseCompleteReason } STATUS current DESCRIPTION "." ::= { callSignalingMIBGroups 4 } callSignalingMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The set of objects required for compliance." MODULE MANDATORY-GROUPS {callSignalConfigGroup, callSignalStatsGroup, connectionsGroup, callSignalEventsGroup } ::= { callSignalingMIBConformance 2 } END