ENTERASYS-WIFI-PROTECTED-ACCESS-MIB ENTERASYS-WIFI-PROTECTED-ACCESS-MIB DEFINITIONS ::= BEGIN -- -- enterasys-wifi-protected-access-mib.txt -- -- This MIB module provides configuration and information objects -- for Enterasys Networks' implementation of the Wi-Fi Protected -- Access (WPA). This MIB was derived from version 3 of the -- IEEE 802.11i draft. -- -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- -- Copyright July 2003 Enterasys Networks, Inc. -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, MacAddress, TruthValue FROM SNMPv2-TC etsysModules FROM ENTERASYS-MIB-NAMES; etsysWiFiProtectedAccessMIB MODULE-IDENTITY LAST-UPDATED "200311061515Z" -- Thu Nov 6 15:15 GMT 2003 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to Wi-Fi Protected Access (WPA) management functionality. This implementation includes Enterasys variants of objects that appear in draft 3.0 of IEEE Std 802.11i, and are relevant to the Wi-Fi Alliance's WPA specification. Since the initial WPA implementation is TKIP-based, the initial version of this MIB does not include AES-specific objects." REVISION "200311061515Z" -- Thu Nov 6 15:15 GMT 2003 DESCRIPTION "Corrected the postal code in the CONTACT-INFO clause." REVISION "200308071708Z" -- Thu Aug 7 17:08 GMT 2003 DESCRIPTION "Initial version of this MIB module." ::= { etsysModules 32 } -- ---------------------------------------------------------- -- -- The Wi-Fi Protected Access Object Identifier -- ---------------------------------------------------------- -- etsysWiFiProtectedAccessObjects OBJECT IDENTIFIER ::= { etsysWiFiProtectedAccessMIB 1 } -- ---------------------------------------------------------- -- -- Textual Conventions -- ---------------------------------------------------------- -- -- ---------------------------------------------------------- -- -- WPA Configuration Table -- ---------------------------------------------------------- -- etsysWPAConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysWPAConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing WPA configuration objects." ::= { etsysWiFiProtectedAccessObjects 1 } etsysWPAConfigEntry OBJECT-TYPE SYNTAX EtsysWPAConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the etsysWPAConfigTable." INDEX { etsysWPAConfigIndex } ::= { etsysWPAConfigTable 1 } EtsysWPAConfigEntry ::= SEQUENCE { etsysWPAConfigIndex INTEGER, etsysWPAConfigOptionImplemented TruthValue, etsysWPAConfigEnabled TruthValue, etsysWPAConfigTKIPNumberOfReplayCounters INTEGER, etsysWPAConfigVersion Integer32, etsysWPAConfigPairwiseKeysSupported Unsigned32, etsysWPAConfigMulticastCipher OCTET STRING, etsysWPAConfigGroupRekeyMethod INTEGER, etsysWPAConfigGroupRekeyTime Unsigned32, etsysWPAConfigGroupRekeyPackets Unsigned32, etsysWPAConfigGroupRekeyStrict TruthValue, etsysWPAConfigPSKValue OCTET STRING, etsysWPAConfigPSKPassPhrase DisplayString, etsysWPAConfigPSKValueEntered TruthValue, etsysWPAConfigMultipleAuthSuitesSupported TruthValue, etsysWPAConfigGroupMasterRekeyTime Unsigned32, etsysWPAConfigGroupUpdateTimeOut Unsigned32, etsysWPAConfigGroupUpdateCount Unsigned32, etsysWPAConfigPairwiseUpdateTimeOut Unsigned32, etsysWPAConfigPairwiseUpdateCount Unsigned32, etsysWPAConfigLegacyOptionSupported TruthValue, etsysWPAConfigAllowLegacyClients TruthValue, etsysWPAConfigRekeyPairwiseWEP TruthValue } etsysWPAConfigIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each 802.11 interface is represented by an entry in the ifTable. If this index is zero, the information in this table shall apply to all 802.11 interfaces." ::= { etsysWPAConfigEntry 1 } etsysWPAConfigOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether the entity is WPA-capable." ::= { etsysWPAConfigEntry 2 } etsysWPAConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to TRUE, this shall indicate that WPA is enabled on this entity. The entity will advertise the WPA Information Element in its Beacons and Probe Responses. This object requires that dot11PrivacyInvoked also be set to TRUE. If dot11PrivacyInvoked is TRUE and etsysWPAConfigEnabled is FALSE, the security mechanism used is WEP." ::= { etsysWPAConfigEntry 3 } etsysWPAConfigTKIPNumberOfReplayCounters OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of replay counters: (0) - 1 replay counter, (1) - 2 replay counters, (2) - 4 replay counters, (3) - 16 replay counters." ::= { etsysWPAConfigEntry 4 } etsysWPAConfigVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest WPA version this entity supports." ::= { etsysWPAConfigEntry 5 } etsysWPAConfigPairwiseKeysSupported OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates how many pairwise keys the entity supports for WPA. When zero, it only supports (four) group keys." ::= { etsysWPAConfigEntry 6 } etsysWPAConfigMulticastCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the multicast cipher suite selector the entity must use. The multicast cipher suite in the WPA Information Element shall take its value from this variable. It consists of an OUI (the three most significant octets) and a cipher suite identifier (the least significant octet). The network administrator can always override the automatically selected multicast cipher suite by writing this object." ::= { etsysWPAConfigEntry 7 } etsysWPAConfigGroupRekeyMethod OBJECT-TYPE SYNTAX INTEGER { disabled(1), timeBased(2), packetBased(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object selects a mechanism for rekeying the WPA Group Key. The default is time-based, once per day. Rekeying the Group key is only applicable to an entity acting in the Authenticator role (an AP in an ESS)." DEFVAL { timeBased } ::= { etsysWPAConfigEntry 8 } etsysWPAConfigGroupRekeyTime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WPA group key must be refreshed. The timer shall start at the moment the group key was set using the MLME-SetKeys primitive. The fine granularity (seconds) also enables the network Administrator to 'immediately' refresh the group key." DEFVAL { 86400 } -- once per day ::= { etsysWPAConfigEntry 9 } etsysWPAConfigGroupRekeyPackets OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "1000 packets" MAX-ACCESS read-write STATUS current DESCRIPTION "A packet count (in 1000s of packets) after which the WPA group key shall be refreshed. The packet counter shall start at the moment the group key was set using the MLME-SetKeys primitive and it shall count all packets encrypted using the current group key." ::= { etsysWPAConfigEntry 10 } etsysWPAConfigGroupRekeyStrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object signals that the WPA group key shall be refreshed whenever a Station leaves the BSS." ::= { etsysWPAConfigEntry 11 } etsysWPAConfigPSKValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Pre-Shared Key (PSK) for when WPA in PSK mode is the selected authentication suite. In that case, the PMK will obtain its value from this object. A string of all 0x00 octets has the meaning 'clear the key'. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero." ::= { etsysWPAConfigEntry 12 } etsysWPAConfigPSKPassPhrase OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The PSK, for when WPA in PSK mode is the selected authentication suite, is configured by etsysWPAConfigPSKValue. An alternative manner of setting the PSK uses the password-to-key algorithm defined in section XXX. This variable provides a means to enter a pass phrase. When this object is written, the WPA entity shall use the password-to-key algorithm specified in section XXX to derive a pre-shared key and populate etsysWPAConfigPSKValue with this key. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero." ::= { etsysWPAConfigEntry 13 } etsysWPAConfigPSKValueEntered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Pre-Shared Key (etsysWPAConfigPSKValue) is set. This allows a network management system to prompt the network manager, when appropriate, to enter the initial value of the key." ::= { etsysWPAConfigEntry 14 } etsysWPAConfigMultipleAuthSuitesSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the entity can take advantage of multiple selections in the etsysWPAConfigAuthenticationSuitesTable. On radios that allow use of only one key management suite at a time, the access point may choose among the selected suites in an arbitrary fashion." ::= { etsysWPAConfigEntry 15 } etsysWPAConfigGroupMasterRekeyTime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WPA group master key must be changed. The timer shall start at the moment the group master key was set. A group key refresh will occur on a group master key change. The fine granularity (seconds) also enables the network Administrator to 'immediately' refresh the group master key." DEFVAL { 604800 } -- 604800 = 7*86400, once per week ::= { etsysWPAConfigEntry 16 } etsysWPAConfigGroupUpdateTimeOut OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WPA group update handshake will be retried. The timer shall start at the moment the group update message is sent." DEFVAL { 100 } ::= { etsysWPAConfigEntry 17 } etsysWPAConfigGroupUpdateCount OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the WPA Group update will be retried." DEFVAL { 3 } ::= { etsysWPAConfigEntry 18 } etsysWPAConfigPairwiseUpdateTimeOut OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WPA 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent." DEFVAL { 100 } ::= { etsysWPAConfigEntry 19 } etsysWPAConfigPairwiseUpdateCount OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the WPA 4-way handshake will be retried." DEFVAL { 3 } ::= { etsysWPAConfigEntry 20 } etsysWPAConfigLegacyOptionSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the entity supports the 'Allow Legacy Clients' option. The answer may vary depending upon the currently-installed radio card model." ::= { etsysWPAConfigEntry 21 } etsysWPAConfigAllowLegacyClients OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides a way to indicate that an access point in WPA mode should accept associations from both WPA clients and legacy (pre-WPA, pre-RSN) clients. When this object is true(1), the etsysWPAConfigMulticastCipher must be WEP-40 or WEP-104 (a.k.a. 128-bit WEP). Using WEP Group keys and letting legacy clients associate may weaken security. To minimize this, 1. Enable legacy associations only on radios that support Pairwise keys. 2. Enable frequent Group key rekeying. With TKIP and AES, there's much less threat of key cracking than with WEP, so the default is 'once in a blue moon'. With WEP, you need to think more in terms of Rapid Rekeying. Access points implementing this feature are under no obligation to support non-802.1X clients. For instance, an access point might use one-time dynamic WEP keys when WPA Group key rotation is disabled. Static WEP clients would not know these keys." ::= { etsysWPAConfigEntry 22 } etsysWPAConfigRekeyPairwiseWEP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object applies when WPA is enabled (dot11PrivacyInvoked, etsysWPAConfigEnabled) and management has chosen to allow a mix of WPA and non-WPA clients (etsysWPAConfigAllowLegacyClients). It specifies whether the access point should tumble Pairwise WEP keys belonging to non-WPA clients. The access point uses Group key rotation as a trigger for Pairwise WEP key tumbling; if you want the latter, be sure to configure the former. See also: etsysDot1xRekeyPairwise." ::= { etsysWPAConfigEntry 23 } -- ---------------------------------------------------------- -- -- Unicast Cipher Suite configuration table -- ---------------------------------------------------------- -- etsysWPAConfigUnicastCiphersTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysWPAConfigUnicastCiphersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the unicast ciphers supported by this entity. It allows enabling and disabling of each unicast cipher by network management. The Unicast Cipher Suite list in the WPA Information Element is formed using the information in this table." ::= { etsysWiFiProtectedAccessObjects 2 } etsysWPAConfigUnicastCiphersEntry OBJECT-TYPE SYNTAX EtsysWPAConfigUnicastCiphersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry, indexed by the interface index (or all interfaces) and the unicast cipher." INDEX { etsysWPAConfigIndex, etsysWPAConfigUnicastCipherIndex } ::= { etsysWPAConfigUnicastCiphersTable 1 } EtsysWPAConfigUnicastCiphersEntry ::= SEQUENCE { etsysWPAConfigUnicastCipherIndex Unsigned32, etsysWPAConfigUnicastCipher OCTET STRING, etsysWPAConfigUnicastCipherEnabled TruthValue } etsysWPAConfigUnicastCipherIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary index into the etsysWPAConfigUnicastCiphersTable." ::= { etsysWPAConfigUnicastCiphersEntry 1 } etsysWPAConfigUnicastCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of a supported unicast cipher. It consists of an OUI (the three most significant octets) and a cipher suite identifier (the least significant octet)." ::= { etsysWPAConfigUnicastCiphersEntry 2 } etsysWPAConfigUnicastCipherEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the unicast cipher." ::= { etsysWPAConfigUnicastCiphersEntry 3 } -- ---------------------------------------------------------- -- -- The Authentication Suites Table -- ---------------------------------------------------------- -- etsysWPAConfigAuthenticationSuitesTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysWPAConfigAuthenticationSuitesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the authentication suites supported by this entity. Each authentication suite can be individually enabled and disabled. The Authentication Suite List in the WPA IE is formed using the information in this table." ::= { etsysWiFiProtectedAccessObjects 3 } etsysWPAConfigAuthenticationSuitesEntry OBJECT-TYPE SYNTAX EtsysWPAConfigAuthenticationSuitesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) in the etsysWPAConfigAuthenticationSuitesTable." INDEX { etsysWPAConfigIndex, etsysWPAConfigAuthenticationSuiteIndex } ::= { etsysWPAConfigAuthenticationSuitesTable 1 } EtsysWPAConfigAuthenticationSuitesEntry ::= SEQUENCE { etsysWPAConfigAuthenticationSuiteIndex Unsigned32, etsysWPAConfigAuthenticationSuite OCTET STRING, etsysWPAConfigAuthenticationSuiteEnabled TruthValue } etsysWPAConfigAuthenticationSuiteIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used as an index into the etsysWPAConfigAuthenticationSuitesTable." ::= { etsysWPAConfigAuthenticationSuitesEntry 1 } etsysWPAConfigAuthenticationSuite OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of an authentication suite. It consists of an OUI (the three most significant octets) and a cipher suite identifier (the least significant octet). " ::= { etsysWPAConfigAuthenticationSuitesEntry 2 } etsysWPAConfigAuthenticationSuiteEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the corresponding authentication suite is enabled/disabled." ::= { etsysWPAConfigAuthenticationSuitesEntry 3 } -- ---------------------------------------------------------- -- -- WPA statistics -- ---------------------------------------------------------- -- etsysWPAStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysWPAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains per-STA statistics for SN. The entry with etsysWPAStatsSTAAddress set to FF-FF-FF-FF-FF-FF shall contain statistics for broadcast/multicast traffic." ::= { etsysWiFiProtectedAccessObjects 4 } etsysWPAStatsEntry OBJECT-TYPE SYNTAX EtsysWPAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the etsysWPAStatsTable." INDEX { etsysWPAConfigIndex, etsysWPAStatsIndex } ::= { etsysWPAStatsTable 1 } EtsysWPAStatsEntry ::= SEQUENCE { etsysWPAStatsIndex Unsigned32, etsysWPAStatsSTAAddress MacAddress, etsysWPAStatsVersion Unsigned32, etsysWPAStatsSelectedUnicastCipher OCTET STRING, etsysWPAStatsTKIPICVErrors Counter32, etsysWPAStatsTKIPLocalMICFailures Counter32, etsysWPAStatsTKIPRemoteMICFailures Counter32, etsysWPAStatsTKIPCounterMeasuresInvoked Counter32 } etsysWPAStatsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An auxiliary index into the etsysWPAStatsTable." ::= { etsysWPAStatsEntry 1 } etsysWPAStatsSTAAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the station the statistics in this conceptual row belong to." ::= { etsysWPAStatsEntry 2 } etsysWPAStatsVersion OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The WPA version which the station associated with." ::= { etsysWPAStatsEntry 3 } etsysWPAStatsSelectedUnicastCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Authentication Suite the station selected during association. The value consists of a three octet OUI followed by a one octet Type as follows: OUI Value Authentication Type Key Management Type -------- ----- ------------------- ------------------- 00:00:00 0 Reserved Reserved 00:00:00 1 Unspecified authentication 802.1X Key Management over 802.1X 00:00:00 2 None 802.1X Key Management using pre-shared Key 00:00:00 3-255 Reserved Reserved Vendor any Vendor Specific Vendor Specific other any Reserved Reserved" ::= { etsysWPAStatsEntry 4 } etsysWPAStatsTKIPICVErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of TKIP ICV errors encountered when decrypting packets for the station." ::= { etsysWPAStatsEntry 5 } etsysWPAStatsTKIPLocalMICFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of Michael MIC failure encountered when checking the integrity of packets received from the station at this entity." ::= { etsysWPAStatsEntry 6 } etsysWPAStatsTKIPRemoteMICFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of Michael MIC failures encountered by the station identified by dot11StatsSTAAddress and reported back to this entity. " ::= { etsysWPAStatsEntry 7 } etsysWPAStatsTKIPCounterMeasuresInvoked OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times a MIC failure occurred two times within 60 seconds and counter-measures were invoked. This variables counts this for both local and remote. It counts every time countermeasures are invoked." ::= { etsysWPAStatsEntry 8 } -- ---------------------------------------------------------- -- -- Wi-Fi Protected Access MIB - Conformance Information -- ---------------------------------------------------------- -- etsysWpaConformance OBJECT IDENTIFIER ::= { etsysWiFiProtectedAccessMIB 2 } etsysWpaGroups OBJECT IDENTIFIER ::= { etsysWpaConformance 1 } etsysWpaCompliances OBJECT IDENTIFIER ::= { etsysWpaConformance 2 } -- ---------------------------------------------------------- -- -- Units of conformance -- ---------------------------------------------------------- -- etsysWpaBaseGroup OBJECT-GROUP OBJECTS { etsysWPAConfigOptionImplemented, etsysWPAConfigEnabled, etsysWPAConfigTKIPNumberOfReplayCounters, etsysWPAConfigVersion, etsysWPAConfigPairwiseKeysSupported, etsysWPAConfigMulticastCipher, etsysWPAConfigGroupRekeyMethod, etsysWPAConfigGroupRekeyTime, etsysWPAConfigGroupRekeyPackets, etsysWPAConfigGroupRekeyStrict, etsysWPAConfigPSKValue, etsysWPAConfigPSKValueEntered, etsysWPAConfigMultipleAuthSuitesSupported, etsysWPAConfigPSKPassPhrase, etsysWPAConfigGroupMasterRekeyTime, etsysWPAConfigGroupUpdateTimeOut, etsysWPAConfigGroupUpdateCount, etsysWPAConfigPairwiseUpdateTimeOut, etsysWPAConfigPairwiseUpdateCount, etsysWPAConfigLegacyOptionSupported, etsysWPAConfigAllowLegacyClients, etsysWPAConfigRekeyPairwiseWEP } STATUS current DESCRIPTION "A collection of objects providing configuration information for the WPA service." ::= { etsysWpaGroups 1 } etsysWpaUnicastCipherGroup OBJECT-GROUP OBJECTS { etsysWPAConfigUnicastCipher, etsysWPAConfigUnicastCipherEnabled } STATUS current DESCRIPTION "A collection of objects providing configuration information for the WPA service." ::= { etsysWpaGroups 2 } etsysWpaAuthSuiteGroup OBJECT-GROUP OBJECTS { etsysWPAConfigAuthenticationSuite, etsysWPAConfigAuthenticationSuiteEnabled } STATUS current DESCRIPTION "A collection of objects providing configuration information for the WPA service." ::= { etsysWpaGroups 3 } etsysWpaStatsGroup OBJECT-GROUP OBJECTS { etsysWPAStatsSTAAddress, etsysWPAStatsVersion, etsysWPAStatsSelectedUnicastCipher, etsysWPAStatsTKIPICVErrors, etsysWPAStatsTKIPLocalMICFailures, etsysWPAStatsTKIPRemoteMICFailures, etsysWPAStatsTKIPCounterMeasuresInvoked } STATUS current DESCRIPTION "A collection of objects providing statistics information for the WPA service." ::= { etsysWpaGroups 4 } -- ---------------------------------------------------------- -- -- Compliance statements -- ---------------------------------------------------------- -- etsysWpaCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support the Enterasys Wi-Fi Protected Access (WPA) MIB." MODULE -- this module MANDATORY-GROUPS { etsysWpaBaseGroup } ::= { etsysWpaCompliances 1 } END