Nortel-Magellan-Passport-LanDriversMIB Nortel-Magellan-Passport-LanDriversMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB FddiMACLongAddressType, Counter32, DisplayString, FddiTimeNano, StorageType, RowStatus, PassportCounter64, InterfaceIndex, Gauge32, Integer32, MacAddress, FddiTimeMilli, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, EnterpriseDateAndTime, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB lpIndex, lp FROM Nortel-Magellan-Passport-LogicalProcessorMIB; -- LAST-UPDATED "9903220000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- LanDrivers Enterprise MIB." lanDriversMIB OBJECT IDENTIFIER ::= { passportMIBs 30 } -- Lp/n Ethernet/n -- This component defines an instance of an Ethernet station attached to a -- bus. One instance of this component will be created for each hardware -- port. Each station will be provisioned prior to operating on the bus. lpEnet OBJECT IDENTIFIER ::= { lp 3 } lpEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnet components." ::= { lpEnet 1 } lpEnetRowStatusEntry OBJECT-TYPE SYNTAX LpEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnet component." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetRowStatusTable 1 } LpEnetRowStatusEntry ::= SEQUENCE { lpEnetRowStatus RowStatus, lpEnetComponentName DisplayString, lpEnetStorageType StorageType, lpEnetIndex Integer32 } lpEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnet components. These components can be added and deleted." ::= { lpEnetRowStatusEntry 1 } lpEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetRowStatusEntry 2 } lpEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnet tables." ::= { lpEnetRowStatusEntry 4 } lpEnetIndex OBJECT-TYPE SYNTAX Integer32 (0..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnet tables." ::= { lpEnetRowStatusEntry 10 } lpEnetCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { lpEnet 10 } lpEnetCidDataEntry OBJECT-TYPE SYNTAX LpEnetCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetCidDataTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetCidDataTable 1 } LpEnetCidDataEntry ::= SEQUENCE { lpEnetCustomerIdentifier Unsigned32 } lpEnetCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { lpEnetCidDataEntry 1 } lpEnetIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { lpEnet 11 } lpEnetIfEntryEntry OBJECT-TYPE SYNTAX LpEnetIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetIfEntryTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetIfEntryTable 1 } LpEnetIfEntryEntry ::= SEQUENCE { lpEnetIfAdminStatus INTEGER, lpEnetIfIndex InterfaceIndex } lpEnetIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpEnetIfEntryEntry 1 } lpEnetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { lpEnetIfEntryEntry 2 } lpEnetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisioned attributes for the Ethernet component." ::= { lpEnet 12 } lpEnetProvEntry OBJECT-TYPE SYNTAX LpEnetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetProvTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetProvTable 1 } LpEnetProvEntry ::= SEQUENCE { lpEnetHeartbeatPacket INTEGER, lpEnetApplicationFramerName Link } lpEnetHeartbeatPacket OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The heartbeat packet feature is used to select whether or not the station will generate a heartbeat packet. If enabled, the station will generate one heartbeat packet every second. If disabled, the station will not generate any heartbeat packets." DEFVAL { enabled } ::= { lpEnetProvEntry 1 } lpEnetApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Ethernet component. This link is used by the component administration system (CAS) to identify which card the application component (associated with the Framer component) is to be created." ::= { lpEnetProvEntry 2 } lpEnetAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { lpEnet 13 } lpEnetAdminInfoEntry OBJECT-TYPE SYNTAX LpEnetAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetAdminInfoTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetAdminInfoTable 1 } LpEnetAdminInfoEntry ::= SEQUENCE { lpEnetVendor AsciiString, lpEnetCommentText AsciiString } lpEnetVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { lpEnetAdminInfoEntry 1 } lpEnetCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { lpEnetAdminInfoEntry 2 } lpEnetStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { lpEnet 15 } lpEnetStateEntry OBJECT-TYPE SYNTAX LpEnetStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetStateTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetStateTable 1 } LpEnetStateEntry ::= SEQUENCE { lpEnetAdminState INTEGER, lpEnetOperationalState INTEGER, lpEnetUsageState INTEGER } lpEnetAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { lpEnetStateEntry 1 } lpEnetOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { lpEnetStateEntry 2 } lpEnetUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { lpEnetStateEntry 3 } lpEnetOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { lpEnet 16 } lpEnetOperStatusEntry OBJECT-TYPE SYNTAX LpEnetOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetOperStatusTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetOperStatusTable 1 } LpEnetOperStatusEntry ::= SEQUENCE { lpEnetSnmpOperStatus INTEGER } lpEnetSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpEnetOperStatusEntry 1 } lpEnetOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Ethernet component." ::= { lpEnet 17 } lpEnetOperEntry OBJECT-TYPE SYNTAX LpEnetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetOperTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetOperTable 1 } LpEnetOperEntry ::= SEQUENCE { lpEnetMacAddress MacAddress } lpEnetMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is only recognized by one station on the network The value of this attribute will be assigned by the system. MAC address is displayed in canonical format." ::= { lpEnetOperEntry 1 } lpEnetStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical attributes for the Ethernet component." ::= { lpEnet 18 } lpEnetStatsEntry OBJECT-TYPE SYNTAX LpEnetStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetStatsTable." INDEX { lpIndex, lpEnetIndex } ::= { lpEnetStatsTable 1 } LpEnetStatsEntry ::= SEQUENCE { lpEnetAlignmentErrors Counter32, lpEnetFcsErrors Counter32, lpEnetSingleCollisionFrames Counter32, lpEnetMultipleCollisionFrames Counter32, lpEnetSqeTestErrors Counter32, lpEnetDeferredTransmissions Counter32, lpEnetLateCollisions Counter32, lpEnetExcessiveCollisions Counter32, lpEnetMacTransmitErrors Counter32, lpEnetCarrierSenseErrors Counter32, lpEnetFrameTooLongs Counter32, lpEnetMacReceiveErrors Counter32 } lpEnetAlignmentErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 2 } lpEnetFcsErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 3 } lpEnetSingleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 4 } lpEnetMultipleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 5 } lpEnetSqeTestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 6 } lpEnetDeferredTransmissions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 7 } lpEnetLateCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 8 } lpEnetExcessiveCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 9 } lpEnetMacTransmitErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 10 } lpEnetCarrierSenseErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 11 } lpEnetFrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 12 } lpEnetMacReceiveErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter will wrap around after it reaches its maximum value." ::= { lpEnetStatsEntry 13 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. lpEnetLt OBJECT IDENTIFIER ::= { lpEnet 2 } lpEnetLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLt components." ::= { lpEnetLt 1 } lpEnetLtRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLt component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex } ::= { lpEnetLtRowStatusTable 1 } LpEnetLtRowStatusEntry ::= SEQUENCE { lpEnetLtRowStatus RowStatus, lpEnetLtComponentName DisplayString, lpEnetLtStorageType StorageType, lpEnetLtIndex NonReplicated } lpEnetLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLt components. These components cannot be added nor deleted." ::= { lpEnetLtRowStatusEntry 1 } lpEnetLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtRowStatusEntry 2 } lpEnetLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLt tables." ::= { lpEnetLtRowStatusEntry 4 } lpEnetLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLt tables." ::= { lpEnetLtRowStatusEntry 10 } lpEnetLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLt 20 } lpEnetLtTopEntry OBJECT-TYPE SYNTAX LpEnetLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex } ::= { lpEnetLtTopTable 1 } LpEnetLtTopEntry ::= SEQUENCE { lpEnetLtTData AsciiString } lpEnetLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. lpEnetLtFrmCmp OBJECT IDENTIFIER ::= { lpEnetLt 2 } lpEnetLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFrmCmp components." ::= { lpEnetLtFrmCmp 1 } lpEnetLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFrmCmp component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFrmCmpIndex } ::= { lpEnetLtFrmCmpRowStatusTable 1 } LpEnetLtFrmCmpRowStatusEntry ::= SEQUENCE { lpEnetLtFrmCmpRowStatus RowStatus, lpEnetLtFrmCmpComponentName DisplayString, lpEnetLtFrmCmpStorageType StorageType, lpEnetLtFrmCmpIndex NonReplicated } lpEnetLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFrmCmp components. These components cannot be added nor deleted." ::= { lpEnetLtFrmCmpRowStatusEntry 1 } lpEnetLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFrmCmpRowStatusEntry 2 } lpEnetLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFrmCmp tables." ::= { lpEnetLtFrmCmpRowStatusEntry 4 } lpEnetLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFrmCmp tables." ::= { lpEnetLtFrmCmpRowStatusEntry 10 } lpEnetLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFrmCmp 10 } lpEnetLtFrmCmpTopEntry OBJECT-TYPE SYNTAX LpEnetLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFrmCmpTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFrmCmpIndex } ::= { lpEnetLtFrmCmpTopTable 1 } LpEnetLtFrmCmpTopEntry ::= SEQUENCE { lpEnetLtFrmCmpTData AsciiString } lpEnetLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. lpEnetLtFrmCpy OBJECT IDENTIFIER ::= { lpEnetLt 3 } lpEnetLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFrmCpy components." ::= { lpEnetLtFrmCpy 1 } lpEnetLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFrmCpy component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFrmCpyIndex } ::= { lpEnetLtFrmCpyRowStatusTable 1 } LpEnetLtFrmCpyRowStatusEntry ::= SEQUENCE { lpEnetLtFrmCpyRowStatus RowStatus, lpEnetLtFrmCpyComponentName DisplayString, lpEnetLtFrmCpyStorageType StorageType, lpEnetLtFrmCpyIndex NonReplicated } lpEnetLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFrmCpy components. These components cannot be added nor deleted." ::= { lpEnetLtFrmCpyRowStatusEntry 1 } lpEnetLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFrmCpyRowStatusEntry 2 } lpEnetLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFrmCpy tables." ::= { lpEnetLtFrmCpyRowStatusEntry 4 } lpEnetLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFrmCpy tables." ::= { lpEnetLtFrmCpyRowStatusEntry 10 } lpEnetLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFrmCpy 10 } lpEnetLtFrmCpyTopEntry OBJECT-TYPE SYNTAX LpEnetLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFrmCpyTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFrmCpyIndex } ::= { lpEnetLtFrmCpyTopTable 1 } LpEnetLtFrmCpyTopEntry ::= SEQUENCE { lpEnetLtFrmCpyTData AsciiString } lpEnetLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. lpEnetLtPrtCfg OBJECT IDENTIFIER ::= { lpEnetLt 4 } lpEnetLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtPrtCfg components." ::= { lpEnetLtPrtCfg 1 } lpEnetLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtPrtCfg component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtPrtCfgIndex } ::= { lpEnetLtPrtCfgRowStatusTable 1 } LpEnetLtPrtCfgRowStatusEntry ::= SEQUENCE { lpEnetLtPrtCfgRowStatus RowStatus, lpEnetLtPrtCfgComponentName DisplayString, lpEnetLtPrtCfgStorageType StorageType, lpEnetLtPrtCfgIndex NonReplicated } lpEnetLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtPrtCfg components. These components cannot be added nor deleted." ::= { lpEnetLtPrtCfgRowStatusEntry 1 } lpEnetLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtPrtCfgRowStatusEntry 2 } lpEnetLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtPrtCfg tables." ::= { lpEnetLtPrtCfgRowStatusEntry 4 } lpEnetLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtPrtCfg tables." ::= { lpEnetLtPrtCfgRowStatusEntry 10 } lpEnetLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtPrtCfg 10 } lpEnetLtPrtCfgTopEntry OBJECT-TYPE SYNTAX LpEnetLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtPrtCfgTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtPrtCfgIndex } ::= { lpEnetLtPrtCfgTopTable 1 } LpEnetLtPrtCfgTopEntry ::= SEQUENCE { lpEnetLtPrtCfgTData AsciiString } lpEnetLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. lpEnetLtFb OBJECT IDENTIFIER ::= { lpEnetLt 5 } lpEnetLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFb components." ::= { lpEnetLtFb 1 } lpEnetLtFbRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFb component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex } ::= { lpEnetLtFbRowStatusTable 1 } LpEnetLtFbRowStatusEntry ::= SEQUENCE { lpEnetLtFbRowStatus RowStatus, lpEnetLtFbComponentName DisplayString, lpEnetLtFbStorageType StorageType, lpEnetLtFbIndex NonReplicated } lpEnetLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFb components. These components cannot be added nor deleted." ::= { lpEnetLtFbRowStatusEntry 1 } lpEnetLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbRowStatusEntry 2 } lpEnetLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFb tables." ::= { lpEnetLtFbRowStatusEntry 4 } lpEnetLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFb tables." ::= { lpEnetLtFbRowStatusEntry 10 } lpEnetLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFb 20 } lpEnetLtFbTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex } ::= { lpEnetLtFbTopTable 1 } LpEnetLtFbTopEntry ::= SEQUENCE { lpEnetLtFbTData AsciiString } lpEnetLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. lpEnetLtFbTxInfo OBJECT IDENTIFIER ::= { lpEnetLtFb 2 } lpEnetLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbTxInfo components." ::= { lpEnetLtFbTxInfo 1 } lpEnetLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbTxInfo component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbTxInfoIndex } ::= { lpEnetLtFbTxInfoRowStatusTable 1 } LpEnetLtFbTxInfoRowStatusEntry ::= SEQUENCE { lpEnetLtFbTxInfoRowStatus RowStatus, lpEnetLtFbTxInfoComponentName DisplayString, lpEnetLtFbTxInfoStorageType StorageType, lpEnetLtFbTxInfoIndex NonReplicated } lpEnetLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbTxInfo components. These components cannot be added nor deleted." ::= { lpEnetLtFbTxInfoRowStatusEntry 1 } lpEnetLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbTxInfoRowStatusEntry 2 } lpEnetLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbTxInfo tables." ::= { lpEnetLtFbTxInfoRowStatusEntry 4 } lpEnetLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbTxInfo tables." ::= { lpEnetLtFbTxInfoRowStatusEntry 10 } lpEnetLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbTxInfo 10 } lpEnetLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbTxInfoTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbTxInfoIndex } ::= { lpEnetLtFbTxInfoTopTable 1 } LpEnetLtFbTxInfoTopEntry ::= SEQUENCE { lpEnetLtFbTxInfoTData AsciiString } lpEnetLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. lpEnetLtFbFddiMac OBJECT IDENTIFIER ::= { lpEnetLtFb 3 } lpEnetLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbFddiMac components." ::= { lpEnetLtFbFddiMac 1 } lpEnetLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbFddiMac component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbFddiMacIndex } ::= { lpEnetLtFbFddiMacRowStatusTable 1 } LpEnetLtFbFddiMacRowStatusEntry ::= SEQUENCE { lpEnetLtFbFddiMacRowStatus RowStatus, lpEnetLtFbFddiMacComponentName DisplayString, lpEnetLtFbFddiMacStorageType StorageType, lpEnetLtFbFddiMacIndex NonReplicated } lpEnetLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbFddiMac components. These components cannot be added nor deleted." ::= { lpEnetLtFbFddiMacRowStatusEntry 1 } lpEnetLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbFddiMacRowStatusEntry 2 } lpEnetLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbFddiMac tables." ::= { lpEnetLtFbFddiMacRowStatusEntry 4 } lpEnetLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbFddiMac tables." ::= { lpEnetLtFbFddiMacRowStatusEntry 10 } lpEnetLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbFddiMac 10 } lpEnetLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbFddiMacTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbFddiMacIndex } ::= { lpEnetLtFbFddiMacTopTable 1 } LpEnetLtFbFddiMacTopEntry ::= SEQUENCE { lpEnetLtFbFddiMacTData AsciiString } lpEnetLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. lpEnetLtFbMacEnet OBJECT IDENTIFIER ::= { lpEnetLtFb 4 } lpEnetLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbMacEnet components." ::= { lpEnetLtFbMacEnet 1 } lpEnetLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbMacEnet component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbMacEnetIndex } ::= { lpEnetLtFbMacEnetRowStatusTable 1 } LpEnetLtFbMacEnetRowStatusEntry ::= SEQUENCE { lpEnetLtFbMacEnetRowStatus RowStatus, lpEnetLtFbMacEnetComponentName DisplayString, lpEnetLtFbMacEnetStorageType StorageType, lpEnetLtFbMacEnetIndex NonReplicated } lpEnetLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbMacEnet components. These components cannot be added nor deleted." ::= { lpEnetLtFbMacEnetRowStatusEntry 1 } lpEnetLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbMacEnetRowStatusEntry 2 } lpEnetLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbMacEnet tables." ::= { lpEnetLtFbMacEnetRowStatusEntry 4 } lpEnetLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbMacEnet tables." ::= { lpEnetLtFbMacEnetRowStatusEntry 10 } lpEnetLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbMacEnet 10 } lpEnetLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbMacEnetTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbMacEnetIndex } ::= { lpEnetLtFbMacEnetTopTable 1 } LpEnetLtFbMacEnetTopEntry ::= SEQUENCE { lpEnetLtFbMacEnetTData AsciiString } lpEnetLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. lpEnetLtFbMacTr OBJECT IDENTIFIER ::= { lpEnetLtFb 5 } lpEnetLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbMacTr components." ::= { lpEnetLtFbMacTr 1 } lpEnetLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbMacTr component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbMacTrIndex } ::= { lpEnetLtFbMacTrRowStatusTable 1 } LpEnetLtFbMacTrRowStatusEntry ::= SEQUENCE { lpEnetLtFbMacTrRowStatus RowStatus, lpEnetLtFbMacTrComponentName DisplayString, lpEnetLtFbMacTrStorageType StorageType, lpEnetLtFbMacTrIndex NonReplicated } lpEnetLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbMacTr components. These components cannot be added nor deleted." ::= { lpEnetLtFbMacTrRowStatusEntry 1 } lpEnetLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbMacTrRowStatusEntry 2 } lpEnetLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbMacTr tables." ::= { lpEnetLtFbMacTrRowStatusEntry 4 } lpEnetLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbMacTr tables." ::= { lpEnetLtFbMacTrRowStatusEntry 10 } lpEnetLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbMacTr 10 } lpEnetLtFbMacTrTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbMacTrTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbMacTrIndex } ::= { lpEnetLtFbMacTrTopTable 1 } LpEnetLtFbMacTrTopEntry ::= SEQUENCE { lpEnetLtFbMacTrTData AsciiString } lpEnetLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. lpEnetLtFbData OBJECT IDENTIFIER ::= { lpEnetLtFb 6 } lpEnetLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbData components." ::= { lpEnetLtFbData 1 } lpEnetLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbData component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbDataIndex } ::= { lpEnetLtFbDataRowStatusTable 1 } LpEnetLtFbDataRowStatusEntry ::= SEQUENCE { lpEnetLtFbDataRowStatus RowStatus, lpEnetLtFbDataComponentName DisplayString, lpEnetLtFbDataStorageType StorageType, lpEnetLtFbDataIndex NonReplicated } lpEnetLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbData components. These components cannot be added nor deleted." ::= { lpEnetLtFbDataRowStatusEntry 1 } lpEnetLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbDataRowStatusEntry 2 } lpEnetLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbData tables." ::= { lpEnetLtFbDataRowStatusEntry 4 } lpEnetLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbData tables." ::= { lpEnetLtFbDataRowStatusEntry 10 } lpEnetLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbData 10 } lpEnetLtFbDataTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbDataTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbDataIndex } ::= { lpEnetLtFbDataTopTable 1 } LpEnetLtFbDataTopEntry ::= SEQUENCE { lpEnetLtFbDataTData AsciiString } lpEnetLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. lpEnetLtFbIpH OBJECT IDENTIFIER ::= { lpEnetLtFb 7 } lpEnetLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbIpH components." ::= { lpEnetLtFbIpH 1 } lpEnetLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbIpH component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbIpHIndex } ::= { lpEnetLtFbIpHRowStatusTable 1 } LpEnetLtFbIpHRowStatusEntry ::= SEQUENCE { lpEnetLtFbIpHRowStatus RowStatus, lpEnetLtFbIpHComponentName DisplayString, lpEnetLtFbIpHStorageType StorageType, lpEnetLtFbIpHIndex NonReplicated } lpEnetLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbIpH components. These components cannot be added nor deleted." ::= { lpEnetLtFbIpHRowStatusEntry 1 } lpEnetLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbIpHRowStatusEntry 2 } lpEnetLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbIpH tables." ::= { lpEnetLtFbIpHRowStatusEntry 4 } lpEnetLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbIpH tables." ::= { lpEnetLtFbIpHRowStatusEntry 10 } lpEnetLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbIpH 10 } lpEnetLtFbIpHTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbIpHTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbIpHIndex } ::= { lpEnetLtFbIpHTopTable 1 } LpEnetLtFbIpHTopEntry ::= SEQUENCE { lpEnetLtFbIpHTData AsciiString } lpEnetLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. lpEnetLtFbLlch OBJECT IDENTIFIER ::= { lpEnetLtFb 8 } lpEnetLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbLlch components." ::= { lpEnetLtFbLlch 1 } lpEnetLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbLlch component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbLlchIndex } ::= { lpEnetLtFbLlchRowStatusTable 1 } LpEnetLtFbLlchRowStatusEntry ::= SEQUENCE { lpEnetLtFbLlchRowStatus RowStatus, lpEnetLtFbLlchComponentName DisplayString, lpEnetLtFbLlchStorageType StorageType, lpEnetLtFbLlchIndex NonReplicated } lpEnetLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbLlch components. These components cannot be added nor deleted." ::= { lpEnetLtFbLlchRowStatusEntry 1 } lpEnetLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbLlchRowStatusEntry 2 } lpEnetLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbLlch tables." ::= { lpEnetLtFbLlchRowStatusEntry 4 } lpEnetLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbLlch tables." ::= { lpEnetLtFbLlchRowStatusEntry 10 } lpEnetLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbLlch 10 } lpEnetLtFbLlchTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbLlchTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbLlchIndex } ::= { lpEnetLtFbLlchTopTable 1 } LpEnetLtFbLlchTopEntry ::= SEQUENCE { lpEnetLtFbLlchTData AsciiString } lpEnetLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. lpEnetLtFbAppleH OBJECT IDENTIFIER ::= { lpEnetLtFb 9 } lpEnetLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbAppleH components." ::= { lpEnetLtFbAppleH 1 } lpEnetLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbAppleH component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbAppleHIndex } ::= { lpEnetLtFbAppleHRowStatusTable 1 } LpEnetLtFbAppleHRowStatusEntry ::= SEQUENCE { lpEnetLtFbAppleHRowStatus RowStatus, lpEnetLtFbAppleHComponentName DisplayString, lpEnetLtFbAppleHStorageType StorageType, lpEnetLtFbAppleHIndex NonReplicated } lpEnetLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbAppleH components. These components cannot be added nor deleted." ::= { lpEnetLtFbAppleHRowStatusEntry 1 } lpEnetLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbAppleHRowStatusEntry 2 } lpEnetLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbAppleH tables." ::= { lpEnetLtFbAppleHRowStatusEntry 4 } lpEnetLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbAppleH tables." ::= { lpEnetLtFbAppleHRowStatusEntry 10 } lpEnetLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbAppleH 10 } lpEnetLtFbAppleHTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbAppleHTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbAppleHIndex } ::= { lpEnetLtFbAppleHTopTable 1 } LpEnetLtFbAppleHTopEntry ::= SEQUENCE { lpEnetLtFbAppleHTData AsciiString } lpEnetLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. lpEnetLtFbIpxH OBJECT IDENTIFIER ::= { lpEnetLtFb 10 } lpEnetLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtFbIpxH components." ::= { lpEnetLtFbIpxH 1 } lpEnetLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtFbIpxH component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbIpxHIndex } ::= { lpEnetLtFbIpxHRowStatusTable 1 } LpEnetLtFbIpxHRowStatusEntry ::= SEQUENCE { lpEnetLtFbIpxHRowStatus RowStatus, lpEnetLtFbIpxHComponentName DisplayString, lpEnetLtFbIpxHStorageType StorageType, lpEnetLtFbIpxHIndex NonReplicated } lpEnetLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtFbIpxH components. These components cannot be added nor deleted." ::= { lpEnetLtFbIpxHRowStatusEntry 1 } lpEnetLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtFbIpxHRowStatusEntry 2 } lpEnetLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtFbIpxH tables." ::= { lpEnetLtFbIpxHRowStatusEntry 4 } lpEnetLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtFbIpxH tables." ::= { lpEnetLtFbIpxHRowStatusEntry 10 } lpEnetLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtFbIpxH 10 } lpEnetLtFbIpxHTopEntry OBJECT-TYPE SYNTAX LpEnetLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtFbIpxHTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtFbIndex, lpEnetLtFbIpxHIndex } ::= { lpEnetLtFbIpxHTopTable 1 } LpEnetLtFbIpxHTopEntry ::= SEQUENCE { lpEnetLtFbIpxHTData AsciiString } lpEnetLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. lpEnetLtCntl OBJECT IDENTIFIER ::= { lpEnetLt 6 } lpEnetLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetLtCntl components." ::= { lpEnetLtCntl 1 } lpEnetLtCntlRowStatusEntry OBJECT-TYPE SYNTAX LpEnetLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetLtCntl component." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtCntlIndex } ::= { lpEnetLtCntlRowStatusTable 1 } LpEnetLtCntlRowStatusEntry ::= SEQUENCE { lpEnetLtCntlRowStatus RowStatus, lpEnetLtCntlComponentName DisplayString, lpEnetLtCntlStorageType StorageType, lpEnetLtCntlIndex NonReplicated } lpEnetLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetLtCntl components. These components cannot be added nor deleted." ::= { lpEnetLtCntlRowStatusEntry 1 } lpEnetLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetLtCntlRowStatusEntry 2 } lpEnetLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetLtCntl tables." ::= { lpEnetLtCntlRowStatusEntry 4 } lpEnetLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetLtCntl tables." ::= { lpEnetLtCntlRowStatusEntry 10 } lpEnetLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEnetLtCntl 10 } lpEnetLtCntlTopEntry OBJECT-TYPE SYNTAX LpEnetLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetLtCntlTopTable." INDEX { lpIndex, lpEnetIndex, lpEnetLtIndex, lpEnetLtCntlIndex } ::= { lpEnetLtCntlTopTable 1 } LpEnetLtCntlTopEntry ::= SEQUENCE { lpEnetLtCntlTData AsciiString } lpEnetLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEnetLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. lpEnetTest OBJECT IDENTIFIER ::= { lpEnet 5 } lpEnetTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEnetTest components." ::= { lpEnetTest 1 } lpEnetTestRowStatusEntry OBJECT-TYPE SYNTAX LpEnetTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEnetTest component." INDEX { lpIndex, lpEnetIndex, lpEnetTestIndex } ::= { lpEnetTestRowStatusTable 1 } LpEnetTestRowStatusEntry ::= SEQUENCE { lpEnetTestRowStatus RowStatus, lpEnetTestComponentName DisplayString, lpEnetTestStorageType StorageType, lpEnetTestIndex NonReplicated } lpEnetTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEnetTest components. These components cannot be added nor deleted." ::= { lpEnetTestRowStatusEntry 1 } lpEnetTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEnetTestRowStatusEntry 2 } lpEnetTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEnetTest tables." ::= { lpEnetTestRowStatusEntry 4 } lpEnetTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEnetTest tables." ::= { lpEnetTestRowStatusEntry 10 } lpEnetTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { lpEnetTest 10 } lpEnetTestPTOEntry OBJECT-TYPE SYNTAX LpEnetTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetTestPTOTable." INDEX { lpIndex, lpEnetIndex, lpEnetTestIndex } ::= { lpEnetTestPTOTable 1 } LpEnetTestPTOEntry ::= SEQUENCE { lpEnetTestType INTEGER, lpEnetTestFrmSize Unsigned32, lpEnetTestDuration Unsigned32 } lpEnetTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { lpEnetTestPTOEntry 1 } lpEnetTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { lpEnetTestPTOEntry 2 } lpEnetTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { lpEnetTestPTOEntry 3 } lpEnetTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEnetTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { lpEnetTest 11 } lpEnetTestResultsEntry OBJECT-TYPE SYNTAX LpEnetTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEnetTestResultsTable." INDEX { lpIndex, lpEnetIndex, lpEnetTestIndex } ::= { lpEnetTestResultsTable 1 } LpEnetTestResultsEntry ::= SEQUENCE { lpEnetTestElapsedTime Counter32, lpEnetTestTimeRemaining Unsigned32, lpEnetTestCauseOfTermination INTEGER, lpEnetTestFrmTx PassportCounter64, lpEnetTestBitsTx PassportCounter64, lpEnetTestFrmRx PassportCounter64, lpEnetTestBitsRx PassportCounter64, lpEnetTestErroredFrmRx PassportCounter64 } lpEnetTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { lpEnetTestResultsEntry 4 } lpEnetTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { lpEnetTestResultsEntry 5 } lpEnetTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { lpEnetTestResultsEntry 6 } lpEnetTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { lpEnetTestResultsEntry 7 } lpEnetTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { lpEnetTestResultsEntry 8 } lpEnetTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEnetTestResultsEntry 9 } lpEnetTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEnetTestResultsEntry 10 } lpEnetTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEnetTestResultsEntry 11 } -- Lp/n Fddi/n -- This component defines an instance of a FDDI station attached to a ring. -- One instance of this component must be created for each hardware -- interface. Each station must be provisioned prior to inserting into the -- ring. lpFi OBJECT IDENTIFIER ::= { lp 4 } lpFiRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFi components." ::= { lpFi 1 } lpFiRowStatusEntry OBJECT-TYPE SYNTAX LpFiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFi component." INDEX { lpIndex, lpFiIndex } ::= { lpFiRowStatusTable 1 } LpFiRowStatusEntry ::= SEQUENCE { lpFiRowStatus RowStatus, lpFiComponentName DisplayString, lpFiStorageType StorageType, lpFiIndex Integer32 } lpFiRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFi components. These components can be added and deleted." ::= { lpFiRowStatusEntry 1 } lpFiComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiRowStatusEntry 2 } lpFiStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFi tables." ::= { lpFiRowStatusEntry 4 } lpFiIndex OBJECT-TYPE SYNTAX Integer32 (0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFi tables." ::= { lpFiRowStatusEntry 10 } lpFiCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { lpFi 10 } lpFiCidDataEntry OBJECT-TYPE SYNTAX LpFiCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiCidDataTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiCidDataTable 1 } LpFiCidDataEntry ::= SEQUENCE { lpFiCustomerIdentifier Unsigned32 } lpFiCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { lpFiCidDataEntry 1 } lpFiIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { lpFi 11 } lpFiIfEntryEntry OBJECT-TYPE SYNTAX LpFiIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiIfEntryTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiIfEntryTable 1 } LpFiIfEntryEntry ::= SEQUENCE { lpFiIfAdminStatus INTEGER, lpFiIfIndex InterfaceIndex } lpFiIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpFiIfEntryEntry 1 } lpFiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { lpFiIfEntryEntry 2 } lpFiSmtProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiSmtProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable Station Management (SMT) attributes of the Fddi component." ::= { lpFi 12 } lpFiSmtProvEntry OBJECT-TYPE SYNTAX LpFiSmtProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiSmtProvTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiSmtProvTable 1 } LpFiSmtProvEntry ::= SEQUENCE { lpFiUserData AsciiString, lpFiAcceptAa INTEGER, lpFiAcceptBb INTEGER, lpFiAcceptAs INTEGER, lpFiAcceptBs INTEGER, lpFiAcceptAm INTEGER, lpFiAcceptBm INTEGER, lpFiUseThruBa INTEGER, lpFiNeighborNotifyInterval Unsigned32, lpFiStatusReportPolicy INTEGER, lpFiTraceMaxExpirationTimer FddiTimeMilli, lpFiApplicationFramerName Link } lpFiUserData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The user data field is used to identify the FDDI interface on the ring. The user data contains a message with a maximum of 32 characters." DEFVAL { '46444449'H } -- "FDDI" ::= { lpFiSmtProvEntry 1 } lpFiAcceptAa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAa attribute defines the station type A to station type A connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { lpFiSmtProvEntry 2 } lpFiAcceptBb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBb attribute defines the station type B to station type B connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { lpFiSmtProvEntry 3 } lpFiAcceptAs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAs attribute defines the station type A to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { lpFiSmtProvEntry 4 } lpFiAcceptBs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBs attribute defines the station type B to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { lpFiSmtProvEntry 5 } lpFiAcceptAm OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAm attribute defines the station type A to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { enabled } ::= { lpFiSmtProvEntry 6 } lpFiAcceptBm OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBm attribute defines the station type B to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { enabled } ::= { lpFiSmtProvEntry 7 } lpFiUseThruBa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The useThruBa attribute is used to configure the requested path of the associated station. If enabled, only the secondary preferred path is permitted. If disabled, only the primary preferred path is permitted." DEFVAL { disabled } ::= { lpFiSmtProvEntry 8 } lpFiNeighborNotifyInterval OBJECT-TYPE SYNTAX Unsigned32 (2..30) ACCESS read-write STATUS mandatory DESCRIPTION "The neighborNotifyInterval attribute contains the amount of time, expressed in seconds, between neighbor notification frames." DEFVAL { 30 } ::= { lpFiSmtProvEntry 10 } lpFiStatusReportPolicy OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The statusReportPolicy attribute indicates whether or not the station will generate status reporting frames for its implemented events and conditions. If true, the station will generate the status frames. If false, the station will not generate the status frames." DEFVAL { true } ::= { lpFiSmtProvEntry 11 } lpFiTraceMaxExpirationTimer OBJECT-TYPE SYNTAX FddiTimeMilli (0..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "The traceMaxExpirationTimer attribute is used to configure the maximum propagation time, expressed in milliseconds, for a trace on a FDDI topology. This value places a lower bound on the detection time for an unrecovered ring." DEFVAL { 7000 } ::= { lpFiSmtProvEntry 12 } lpFiApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Fddi component. This defines which LanApplication/n Framer will be using this Fddi interface." ::= { lpFiSmtProvEntry 13 } lpFiMacProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiMacProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable MAC attributes of the Fddi component." ::= { lpFi 13 } lpFiMacProvEntry OBJECT-TYPE SYNTAX LpFiMacProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiMacProvTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiMacProvTable 1 } LpFiMacProvEntry ::= SEQUENCE { lpFiTokenRequestTimer FddiTimeNano, lpFiTokenMaxTimer FddiTimeNano, lpFiValidTransmissionTimer FddiTimeNano } lpFiTokenRequestTimer OBJECT-TYPE SYNTAX FddiTimeNano (20480..1340000000) ACCESS read-write STATUS mandatory DESCRIPTION "The tokenRequestTimer value contains the token request value assigned to the associated medium access controller (MAC). Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 165290000 } ::= { lpFiMacProvEntry 1 } lpFiTokenMaxTimer OBJECT-TYPE SYNTAX FddiTimeNano (40960..1342200000) ACCESS read-write STATUS mandatory DESCRIPTION "The tokenMaxTimer value is the maximum timer value the negotiated token rotation time may assume. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 167770000 } ::= { lpFiMacProvEntry 2 } lpFiValidTransmissionTimer OBJECT-TYPE SYNTAX FddiTimeNano (40960..1342200000) ACCESS read-write STATUS mandatory DESCRIPTION "The validTransmissionTimer (Tvx) value specifies the amount of time required for a valid transmission. The station must receive a valid transmission once every Tvx. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 2621400 } ::= { lpFiMacProvEntry 3 } lpFiAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { lpFi 14 } lpFiAdminInfoEntry OBJECT-TYPE SYNTAX LpFiAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiAdminInfoTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiAdminInfoTable 1 } LpFiAdminInfoEntry ::= SEQUENCE { lpFiVendor AsciiString, lpFiCommentText AsciiString } lpFiVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { lpFiAdminInfoEntry 1 } lpFiCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { lpFiAdminInfoEntry 2 } lpFiStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { lpFi 16 } lpFiStateEntry OBJECT-TYPE SYNTAX LpFiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiStateTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiStateTable 1 } LpFiStateEntry ::= SEQUENCE { lpFiAdminState INTEGER, lpFiOperationalState INTEGER, lpFiUsageState INTEGER } lpFiAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { lpFiStateEntry 1 } lpFiOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { lpFiStateEntry 2 } lpFiUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { lpFiStateEntry 3 } lpFiOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { lpFi 17 } lpFiOperStatusEntry OBJECT-TYPE SYNTAX LpFiOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiOperStatusTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiOperStatusTable 1 } LpFiOperStatusEntry ::= SEQUENCE { lpFiSnmpOperStatus INTEGER } lpFiSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpFiOperStatusEntry 1 } lpFiSmtOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiSmtOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational station management (SMT) attributes of the Fddi component." ::= { lpFi 18 } lpFiSmtOperEntry OBJECT-TYPE SYNTAX LpFiSmtOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiSmtOperTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiSmtOperTable 1 } LpFiSmtOperEntry ::= SEQUENCE { lpFiVersion AsciiString, lpFiBypassPresent INTEGER, lpFiEcmState INTEGER, lpFiCfState INTEGER } lpFiVersion OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The version attribute contains a copy of the currently supported version numbers of the management information base (MIB) and the station management (SMT)." ::= { lpFiSmtOperEntry 1 } lpFiBypassPresent OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The bypassPresent attribute indicates whether the optical bypass switch is present on its AB port pair. If true, the optical bypass switch is present. If false, it is not present." ::= { lpFiSmtOperEntry 14 } lpFiEcmState OBJECT-TYPE SYNTAX INTEGER { out(1), in(2), trace(3), leave(4), pathTest(5), insert(6), check(7), deinsert(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The ecmState, Entity Coordination Manager (ECM), state indicates the current state of the ECM state machine." ::= { lpFiSmtOperEntry 15 } lpFiCfState OBJECT-TYPE SYNTAX INTEGER { isolated(1), localA(2), localB(3), localAB(4), localS(5), wrapA(6), wrapB(7), wrapAB(8), wrapS(9), cWrapA(10), cWrapB(11), cWrapS(12), thru(13) } ACCESS read-only STATUS mandatory DESCRIPTION "The cfState attribute indicates the current state of the configuration management (CFM) state machine." ::= { lpFiSmtOperEntry 16 } lpFiMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational Medium Access Controller (MAC) attributes of the of the Fddi component." ::= { lpFi 19 } lpFiMacOperEntry OBJECT-TYPE SYNTAX LpFiMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiMacOperTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiMacOperTable 1 } LpFiMacOperEntry ::= SEQUENCE { lpFiRingLatency Gauge32, lpFiMacAddress FddiMACLongAddressType, lpFiUpstreamNeighbor FddiMACLongAddressType, lpFiDownstreamNeighbor FddiMACLongAddressType, lpFiOldUpstreamNeighbor FddiMACLongAddressType, lpFiOldDownstreamNeighbor FddiMACLongAddressType, lpFiDupAddressTest INTEGER, lpFiTokenNegotiatedTimer FddiTimeNano, lpFiFrameCounts Counter32, lpFiCopiedCounts Counter32, lpFiTransmitCounts Counter32, lpFiErrorCounts Counter32, lpFiLostCounts Counter32, lpFiRmtState INTEGER, lpFiFrameErrorFlag INTEGER } lpFiRingLatency OBJECT-TYPE SYNTAX Gauge32 (1280..1342000000) ACCESS read-only STATUS mandatory DESCRIPTION "The ringLatency attribute contains the measured ring latency of the ring the station is attached to." ::= { lpFiMacOperEntry 1 } lpFiMacAddress OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncMacAddress." ::= { lpFiMacOperEntry 10 } lpFiUpstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The upstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncUpstreamNeighbor." ::= { lpFiMacOperEntry 11 } lpFiDownstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The downstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncDownstreamNeighbor." ::= { lpFiMacOperEntry 12 } lpFiOldUpstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The oldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldUpstreamNeighbor." ::= { lpFiMacOperEntry 13 } lpFiOldDownstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The oldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldDownstreamNeighbor." ::= { lpFiMacOperEntry 14 } lpFiDupAddressTest OBJECT-TYPE SYNTAX INTEGER { notDone(1), pass(2), fail(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The dupAddressTest attribute indicates the condition results of the duplicate address test. If notDone, the test has not been executed. If pass, the test has successfully executed. If fail, the test has failed." ::= { lpFiMacOperEntry 15 } lpFiTokenNegotiatedTimer OBJECT-TYPE SYNTAX FddiTimeNano (80..1340000000) ACCESS read-only STATUS mandatory DESCRIPTION "The tokenNegotiatedTimer specifies the negotiated token rotation time." DEFVAL { 167772000 } ::= { lpFiMacOperEntry 18 } lpFiFrameCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frameCounts attribute contains the number of frames that have been received by the station. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacOperEntry 19 } lpFiCopiedCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The copiedCounts attribute contains the number of frames successfully copied into this station's receive buffers, not including MAC control frames. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacOperEntry 20 } lpFiTransmitCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The transmitCounts attribute contains the number of frames transmitted by this station, not including MAC control frames. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacOperEntry 21 } lpFiErrorCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The errorCounts attribute contains the number of error frames first detected by this station. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacOperEntry 22 } lpFiLostCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lostCounts attribute contains the number of instances that the station has detected a format error during frame reception such that the frame was stripped. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacOperEntry 23 } lpFiRmtState OBJECT-TYPE SYNTAX INTEGER { isolated(1), nonOp(2), ringOp(3), detect(4), nonOpDup(5), ringOpDup(6), directed(7), trace(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The rmtState, ring management (RMT), state indicates the current state of the RMT state machine." ::= { lpFiMacOperEntry 25 } lpFiFrameErrorFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The frameErrorFlag attribute indicates the MAC frame error condition status. If true, a MAC frame error is present. If false, a MAC frame error condition is not present." ::= { lpFiMacOperEntry 28 } lpFiMacCOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiMacCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Medium Access Controller (MAC) Counters Table of the Fddi component." ::= { lpFi 20 } lpFiMacCOperEntry OBJECT-TYPE SYNTAX LpFiMacCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiMacCOperTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiMacCOperTable 1 } LpFiMacCOperEntry ::= SEQUENCE { lpFiTokenCounts Counter32, lpFiTvxExpiredCounts Counter32, lpFiNotCopiedCounts Counter32, lpFiLateCounts Counter32, lpFiRingOpCounts Counter32 } lpFiTokenCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The tokenCounts attribute contains the number of times the station has received a token. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacCOperEntry 1 } lpFiTvxExpiredCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The tvxExpiredCounts, Transmission Valid eXpired (TVX), attribute contains the number of times that TVX timer has expired. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacCOperEntry 2 } lpFiNotCopiedCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The notCopiedCounts attribute contains the number of times that the station has detected a frame addressed to itself but did not copy it due to local buffer congestion. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacCOperEntry 3 } lpFiLateCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCounts attribute contains the number of token rotation time (TRT) expirations since the station was reset or a token was received. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value." ::= { lpFiMacCOperEntry 4 } lpFiRingOpCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ringOpCounts attribute contains the number of times the station has made the transition from the ring not operational state to the ring operational state." ::= { lpFiMacCOperEntry 5 } lpFiNcMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Fddi component related to non-canonical MAC addresses." ::= { lpFi 26 } lpFiNcMacOperEntry OBJECT-TYPE SYNTAX LpFiNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiNcMacOperTable." INDEX { lpIndex, lpFiIndex } ::= { lpFiNcMacOperTable 1 } LpFiNcMacOperEntry ::= SEQUENCE { lpFiNcMacAddress MacAddress, lpFiNcUpstreamNeighbor MacAddress, lpFiNcDownstreamNeighbor MacAddress, lpFiNcOldUpstreamNeighbor MacAddress, lpFiNcOldDownstreamNeighbor MacAddress } lpFiNcMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in non- canonical format. The canonical version of this address is indicated in macAddress." ::= { lpFiNcMacOperEntry 1 } lpFiNcUpstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncUpstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in upstreamNeighbor." ::= { lpFiNcMacOperEntry 2 } lpFiNcDownstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncDownstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in downstreamNeighbor" ::= { lpFiNcMacOperEntry 3 } lpFiNcOldUpstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncOldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldUpstreamNeighbor." ::= { lpFiNcMacOperEntry 4 } lpFiNcOldDownstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncOldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldDownstreamNeighbor." ::= { lpFiNcMacOperEntry 5 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. lpFiLt OBJECT IDENTIFIER ::= { lpFi 2 } lpFiLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLt components." ::= { lpFiLt 1 } lpFiLtRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLt component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex } ::= { lpFiLtRowStatusTable 1 } LpFiLtRowStatusEntry ::= SEQUENCE { lpFiLtRowStatus RowStatus, lpFiLtComponentName DisplayString, lpFiLtStorageType StorageType, lpFiLtIndex NonReplicated } lpFiLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLt components. These components cannot be added nor deleted." ::= { lpFiLtRowStatusEntry 1 } lpFiLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtRowStatusEntry 2 } lpFiLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLt tables." ::= { lpFiLtRowStatusEntry 4 } lpFiLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLt tables." ::= { lpFiLtRowStatusEntry 10 } lpFiLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLt 20 } lpFiLtTopEntry OBJECT-TYPE SYNTAX LpFiLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex } ::= { lpFiLtTopTable 1 } LpFiLtTopEntry ::= SEQUENCE { lpFiLtTData AsciiString } lpFiLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. lpFiLtFrmCmp OBJECT IDENTIFIER ::= { lpFiLt 2 } lpFiLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFrmCmp components." ::= { lpFiLtFrmCmp 1 } lpFiLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFrmCmp component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFrmCmpIndex } ::= { lpFiLtFrmCmpRowStatusTable 1 } LpFiLtFrmCmpRowStatusEntry ::= SEQUENCE { lpFiLtFrmCmpRowStatus RowStatus, lpFiLtFrmCmpComponentName DisplayString, lpFiLtFrmCmpStorageType StorageType, lpFiLtFrmCmpIndex NonReplicated } lpFiLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFrmCmp components. These components cannot be added nor deleted." ::= { lpFiLtFrmCmpRowStatusEntry 1 } lpFiLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFrmCmpRowStatusEntry 2 } lpFiLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFrmCmp tables." ::= { lpFiLtFrmCmpRowStatusEntry 4 } lpFiLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFrmCmp tables." ::= { lpFiLtFrmCmpRowStatusEntry 10 } lpFiLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFrmCmp 10 } lpFiLtFrmCmpTopEntry OBJECT-TYPE SYNTAX LpFiLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFrmCmpTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFrmCmpIndex } ::= { lpFiLtFrmCmpTopTable 1 } LpFiLtFrmCmpTopEntry ::= SEQUENCE { lpFiLtFrmCmpTData AsciiString } lpFiLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. lpFiLtFrmCpy OBJECT IDENTIFIER ::= { lpFiLt 3 } lpFiLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFrmCpy components." ::= { lpFiLtFrmCpy 1 } lpFiLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFrmCpy component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFrmCpyIndex } ::= { lpFiLtFrmCpyRowStatusTable 1 } LpFiLtFrmCpyRowStatusEntry ::= SEQUENCE { lpFiLtFrmCpyRowStatus RowStatus, lpFiLtFrmCpyComponentName DisplayString, lpFiLtFrmCpyStorageType StorageType, lpFiLtFrmCpyIndex NonReplicated } lpFiLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFrmCpy components. These components cannot be added nor deleted." ::= { lpFiLtFrmCpyRowStatusEntry 1 } lpFiLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFrmCpyRowStatusEntry 2 } lpFiLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFrmCpy tables." ::= { lpFiLtFrmCpyRowStatusEntry 4 } lpFiLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFrmCpy tables." ::= { lpFiLtFrmCpyRowStatusEntry 10 } lpFiLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFrmCpy 10 } lpFiLtFrmCpyTopEntry OBJECT-TYPE SYNTAX LpFiLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFrmCpyTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFrmCpyIndex } ::= { lpFiLtFrmCpyTopTable 1 } LpFiLtFrmCpyTopEntry ::= SEQUENCE { lpFiLtFrmCpyTData AsciiString } lpFiLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. lpFiLtPrtCfg OBJECT IDENTIFIER ::= { lpFiLt 4 } lpFiLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtPrtCfg components." ::= { lpFiLtPrtCfg 1 } lpFiLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtPrtCfg component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtPrtCfgIndex } ::= { lpFiLtPrtCfgRowStatusTable 1 } LpFiLtPrtCfgRowStatusEntry ::= SEQUENCE { lpFiLtPrtCfgRowStatus RowStatus, lpFiLtPrtCfgComponentName DisplayString, lpFiLtPrtCfgStorageType StorageType, lpFiLtPrtCfgIndex NonReplicated } lpFiLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtPrtCfg components. These components cannot be added nor deleted." ::= { lpFiLtPrtCfgRowStatusEntry 1 } lpFiLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtPrtCfgRowStatusEntry 2 } lpFiLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtPrtCfg tables." ::= { lpFiLtPrtCfgRowStatusEntry 4 } lpFiLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtPrtCfg tables." ::= { lpFiLtPrtCfgRowStatusEntry 10 } lpFiLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtPrtCfg 10 } lpFiLtPrtCfgTopEntry OBJECT-TYPE SYNTAX LpFiLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtPrtCfgTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtPrtCfgIndex } ::= { lpFiLtPrtCfgTopTable 1 } LpFiLtPrtCfgTopEntry ::= SEQUENCE { lpFiLtPrtCfgTData AsciiString } lpFiLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. lpFiLtFb OBJECT IDENTIFIER ::= { lpFiLt 5 } lpFiLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFb components." ::= { lpFiLtFb 1 } lpFiLtFbRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFb component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex } ::= { lpFiLtFbRowStatusTable 1 } LpFiLtFbRowStatusEntry ::= SEQUENCE { lpFiLtFbRowStatus RowStatus, lpFiLtFbComponentName DisplayString, lpFiLtFbStorageType StorageType, lpFiLtFbIndex NonReplicated } lpFiLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFb components. These components cannot be added nor deleted." ::= { lpFiLtFbRowStatusEntry 1 } lpFiLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbRowStatusEntry 2 } lpFiLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFb tables." ::= { lpFiLtFbRowStatusEntry 4 } lpFiLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFb tables." ::= { lpFiLtFbRowStatusEntry 10 } lpFiLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFb 20 } lpFiLtFbTopEntry OBJECT-TYPE SYNTAX LpFiLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex } ::= { lpFiLtFbTopTable 1 } LpFiLtFbTopEntry ::= SEQUENCE { lpFiLtFbTData AsciiString } lpFiLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. lpFiLtFbTxInfo OBJECT IDENTIFIER ::= { lpFiLtFb 2 } lpFiLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbTxInfo components." ::= { lpFiLtFbTxInfo 1 } lpFiLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbTxInfo component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbTxInfoIndex } ::= { lpFiLtFbTxInfoRowStatusTable 1 } LpFiLtFbTxInfoRowStatusEntry ::= SEQUENCE { lpFiLtFbTxInfoRowStatus RowStatus, lpFiLtFbTxInfoComponentName DisplayString, lpFiLtFbTxInfoStorageType StorageType, lpFiLtFbTxInfoIndex NonReplicated } lpFiLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbTxInfo components. These components cannot be added nor deleted." ::= { lpFiLtFbTxInfoRowStatusEntry 1 } lpFiLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbTxInfoRowStatusEntry 2 } lpFiLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbTxInfo tables." ::= { lpFiLtFbTxInfoRowStatusEntry 4 } lpFiLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbTxInfo tables." ::= { lpFiLtFbTxInfoRowStatusEntry 10 } lpFiLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbTxInfo 10 } lpFiLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX LpFiLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbTxInfoTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbTxInfoIndex } ::= { lpFiLtFbTxInfoTopTable 1 } LpFiLtFbTxInfoTopEntry ::= SEQUENCE { lpFiLtFbTxInfoTData AsciiString } lpFiLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. lpFiLtFbFddiMac OBJECT IDENTIFIER ::= { lpFiLtFb 3 } lpFiLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbFddiMac components." ::= { lpFiLtFbFddiMac 1 } lpFiLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbFddiMac component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbFddiMacIndex } ::= { lpFiLtFbFddiMacRowStatusTable 1 } LpFiLtFbFddiMacRowStatusEntry ::= SEQUENCE { lpFiLtFbFddiMacRowStatus RowStatus, lpFiLtFbFddiMacComponentName DisplayString, lpFiLtFbFddiMacStorageType StorageType, lpFiLtFbFddiMacIndex NonReplicated } lpFiLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbFddiMac components. These components cannot be added nor deleted." ::= { lpFiLtFbFddiMacRowStatusEntry 1 } lpFiLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbFddiMacRowStatusEntry 2 } lpFiLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbFddiMac tables." ::= { lpFiLtFbFddiMacRowStatusEntry 4 } lpFiLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbFddiMac tables." ::= { lpFiLtFbFddiMacRowStatusEntry 10 } lpFiLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbFddiMac 10 } lpFiLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX LpFiLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbFddiMacTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbFddiMacIndex } ::= { lpFiLtFbFddiMacTopTable 1 } LpFiLtFbFddiMacTopEntry ::= SEQUENCE { lpFiLtFbFddiMacTData AsciiString } lpFiLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. lpFiLtFbMacEnet OBJECT IDENTIFIER ::= { lpFiLtFb 4 } lpFiLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbMacEnet components." ::= { lpFiLtFbMacEnet 1 } lpFiLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbMacEnet component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbMacEnetIndex } ::= { lpFiLtFbMacEnetRowStatusTable 1 } LpFiLtFbMacEnetRowStatusEntry ::= SEQUENCE { lpFiLtFbMacEnetRowStatus RowStatus, lpFiLtFbMacEnetComponentName DisplayString, lpFiLtFbMacEnetStorageType StorageType, lpFiLtFbMacEnetIndex NonReplicated } lpFiLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbMacEnet components. These components cannot be added nor deleted." ::= { lpFiLtFbMacEnetRowStatusEntry 1 } lpFiLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbMacEnetRowStatusEntry 2 } lpFiLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbMacEnet tables." ::= { lpFiLtFbMacEnetRowStatusEntry 4 } lpFiLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbMacEnet tables." ::= { lpFiLtFbMacEnetRowStatusEntry 10 } lpFiLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbMacEnet 10 } lpFiLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX LpFiLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbMacEnetTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbMacEnetIndex } ::= { lpFiLtFbMacEnetTopTable 1 } LpFiLtFbMacEnetTopEntry ::= SEQUENCE { lpFiLtFbMacEnetTData AsciiString } lpFiLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. lpFiLtFbMacTr OBJECT IDENTIFIER ::= { lpFiLtFb 5 } lpFiLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbMacTr components." ::= { lpFiLtFbMacTr 1 } lpFiLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbMacTr component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbMacTrIndex } ::= { lpFiLtFbMacTrRowStatusTable 1 } LpFiLtFbMacTrRowStatusEntry ::= SEQUENCE { lpFiLtFbMacTrRowStatus RowStatus, lpFiLtFbMacTrComponentName DisplayString, lpFiLtFbMacTrStorageType StorageType, lpFiLtFbMacTrIndex NonReplicated } lpFiLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbMacTr components. These components cannot be added nor deleted." ::= { lpFiLtFbMacTrRowStatusEntry 1 } lpFiLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbMacTrRowStatusEntry 2 } lpFiLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbMacTr tables." ::= { lpFiLtFbMacTrRowStatusEntry 4 } lpFiLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbMacTr tables." ::= { lpFiLtFbMacTrRowStatusEntry 10 } lpFiLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbMacTr 10 } lpFiLtFbMacTrTopEntry OBJECT-TYPE SYNTAX LpFiLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbMacTrTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbMacTrIndex } ::= { lpFiLtFbMacTrTopTable 1 } LpFiLtFbMacTrTopEntry ::= SEQUENCE { lpFiLtFbMacTrTData AsciiString } lpFiLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. lpFiLtFbData OBJECT IDENTIFIER ::= { lpFiLtFb 6 } lpFiLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbData components." ::= { lpFiLtFbData 1 } lpFiLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbData component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbDataIndex } ::= { lpFiLtFbDataRowStatusTable 1 } LpFiLtFbDataRowStatusEntry ::= SEQUENCE { lpFiLtFbDataRowStatus RowStatus, lpFiLtFbDataComponentName DisplayString, lpFiLtFbDataStorageType StorageType, lpFiLtFbDataIndex NonReplicated } lpFiLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbData components. These components cannot be added nor deleted." ::= { lpFiLtFbDataRowStatusEntry 1 } lpFiLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbDataRowStatusEntry 2 } lpFiLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbData tables." ::= { lpFiLtFbDataRowStatusEntry 4 } lpFiLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbData tables." ::= { lpFiLtFbDataRowStatusEntry 10 } lpFiLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbData 10 } lpFiLtFbDataTopEntry OBJECT-TYPE SYNTAX LpFiLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbDataTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbDataIndex } ::= { lpFiLtFbDataTopTable 1 } LpFiLtFbDataTopEntry ::= SEQUENCE { lpFiLtFbDataTData AsciiString } lpFiLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. lpFiLtFbIpH OBJECT IDENTIFIER ::= { lpFiLtFb 7 } lpFiLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbIpH components." ::= { lpFiLtFbIpH 1 } lpFiLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbIpH component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbIpHIndex } ::= { lpFiLtFbIpHRowStatusTable 1 } LpFiLtFbIpHRowStatusEntry ::= SEQUENCE { lpFiLtFbIpHRowStatus RowStatus, lpFiLtFbIpHComponentName DisplayString, lpFiLtFbIpHStorageType StorageType, lpFiLtFbIpHIndex NonReplicated } lpFiLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbIpH components. These components cannot be added nor deleted." ::= { lpFiLtFbIpHRowStatusEntry 1 } lpFiLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbIpHRowStatusEntry 2 } lpFiLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbIpH tables." ::= { lpFiLtFbIpHRowStatusEntry 4 } lpFiLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbIpH tables." ::= { lpFiLtFbIpHRowStatusEntry 10 } lpFiLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbIpH 10 } lpFiLtFbIpHTopEntry OBJECT-TYPE SYNTAX LpFiLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbIpHTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbIpHIndex } ::= { lpFiLtFbIpHTopTable 1 } LpFiLtFbIpHTopEntry ::= SEQUENCE { lpFiLtFbIpHTData AsciiString } lpFiLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. lpFiLtFbLlch OBJECT IDENTIFIER ::= { lpFiLtFb 8 } lpFiLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbLlch components." ::= { lpFiLtFbLlch 1 } lpFiLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbLlch component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbLlchIndex } ::= { lpFiLtFbLlchRowStatusTable 1 } LpFiLtFbLlchRowStatusEntry ::= SEQUENCE { lpFiLtFbLlchRowStatus RowStatus, lpFiLtFbLlchComponentName DisplayString, lpFiLtFbLlchStorageType StorageType, lpFiLtFbLlchIndex NonReplicated } lpFiLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbLlch components. These components cannot be added nor deleted." ::= { lpFiLtFbLlchRowStatusEntry 1 } lpFiLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbLlchRowStatusEntry 2 } lpFiLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbLlch tables." ::= { lpFiLtFbLlchRowStatusEntry 4 } lpFiLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbLlch tables." ::= { lpFiLtFbLlchRowStatusEntry 10 } lpFiLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbLlch 10 } lpFiLtFbLlchTopEntry OBJECT-TYPE SYNTAX LpFiLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbLlchTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbLlchIndex } ::= { lpFiLtFbLlchTopTable 1 } LpFiLtFbLlchTopEntry ::= SEQUENCE { lpFiLtFbLlchTData AsciiString } lpFiLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. lpFiLtFbAppleH OBJECT IDENTIFIER ::= { lpFiLtFb 9 } lpFiLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbAppleH components." ::= { lpFiLtFbAppleH 1 } lpFiLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbAppleH component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbAppleHIndex } ::= { lpFiLtFbAppleHRowStatusTable 1 } LpFiLtFbAppleHRowStatusEntry ::= SEQUENCE { lpFiLtFbAppleHRowStatus RowStatus, lpFiLtFbAppleHComponentName DisplayString, lpFiLtFbAppleHStorageType StorageType, lpFiLtFbAppleHIndex NonReplicated } lpFiLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbAppleH components. These components cannot be added nor deleted." ::= { lpFiLtFbAppleHRowStatusEntry 1 } lpFiLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbAppleHRowStatusEntry 2 } lpFiLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbAppleH tables." ::= { lpFiLtFbAppleHRowStatusEntry 4 } lpFiLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbAppleH tables." ::= { lpFiLtFbAppleHRowStatusEntry 10 } lpFiLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbAppleH 10 } lpFiLtFbAppleHTopEntry OBJECT-TYPE SYNTAX LpFiLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbAppleHTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbAppleHIndex } ::= { lpFiLtFbAppleHTopTable 1 } LpFiLtFbAppleHTopEntry ::= SEQUENCE { lpFiLtFbAppleHTData AsciiString } lpFiLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. lpFiLtFbIpxH OBJECT IDENTIFIER ::= { lpFiLtFb 10 } lpFiLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtFbIpxH components." ::= { lpFiLtFbIpxH 1 } lpFiLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtFbIpxH component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbIpxHIndex } ::= { lpFiLtFbIpxHRowStatusTable 1 } LpFiLtFbIpxHRowStatusEntry ::= SEQUENCE { lpFiLtFbIpxHRowStatus RowStatus, lpFiLtFbIpxHComponentName DisplayString, lpFiLtFbIpxHStorageType StorageType, lpFiLtFbIpxHIndex NonReplicated } lpFiLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtFbIpxH components. These components cannot be added nor deleted." ::= { lpFiLtFbIpxHRowStatusEntry 1 } lpFiLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtFbIpxHRowStatusEntry 2 } lpFiLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtFbIpxH tables." ::= { lpFiLtFbIpxHRowStatusEntry 4 } lpFiLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtFbIpxH tables." ::= { lpFiLtFbIpxHRowStatusEntry 10 } lpFiLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtFbIpxH 10 } lpFiLtFbIpxHTopEntry OBJECT-TYPE SYNTAX LpFiLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtFbIpxHTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtFbIndex, lpFiLtFbIpxHIndex } ::= { lpFiLtFbIpxHTopTable 1 } LpFiLtFbIpxHTopEntry ::= SEQUENCE { lpFiLtFbIpxHTData AsciiString } lpFiLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. lpFiLtCntl OBJECT IDENTIFIER ::= { lpFiLt 6 } lpFiLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiLtCntl components." ::= { lpFiLtCntl 1 } lpFiLtCntlRowStatusEntry OBJECT-TYPE SYNTAX LpFiLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiLtCntl component." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtCntlIndex } ::= { lpFiLtCntlRowStatusTable 1 } LpFiLtCntlRowStatusEntry ::= SEQUENCE { lpFiLtCntlRowStatus RowStatus, lpFiLtCntlComponentName DisplayString, lpFiLtCntlStorageType StorageType, lpFiLtCntlIndex NonReplicated } lpFiLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiLtCntl components. These components cannot be added nor deleted." ::= { lpFiLtCntlRowStatusEntry 1 } lpFiLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiLtCntlRowStatusEntry 2 } lpFiLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiLtCntl tables." ::= { lpFiLtCntlRowStatusEntry 4 } lpFiLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiLtCntl tables." ::= { lpFiLtCntlRowStatusEntry 10 } lpFiLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpFiLtCntl 10 } lpFiLtCntlTopEntry OBJECT-TYPE SYNTAX LpFiLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiLtCntlTopTable." INDEX { lpIndex, lpFiIndex, lpFiLtIndex, lpFiLtCntlIndex } ::= { lpFiLtCntlTopTable 1 } LpFiLtCntlTopEntry ::= SEQUENCE { lpFiLtCntlTData AsciiString } lpFiLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpFiLtCntlTopEntry 1 } -- Lp/n Fddi/n Phy/x -- This component defines an instance of a FDDI port attached to a ring. -- Two instances of this component must be provisioned for each hardware -- port. Each port must be provisioned prior to inserting into the ring. lpFiPhy OBJECT IDENTIFIER ::= { lpFi 3 } lpFiPhyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiPhyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiPhy components." ::= { lpFiPhy 1 } lpFiPhyRowStatusEntry OBJECT-TYPE SYNTAX LpFiPhyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiPhy component." INDEX { lpIndex, lpFiIndex, lpFiPhyFddiPhyTypeIndex } ::= { lpFiPhyRowStatusTable 1 } LpFiPhyRowStatusEntry ::= SEQUENCE { lpFiPhyRowStatus RowStatus, lpFiPhyComponentName DisplayString, lpFiPhyStorageType StorageType, lpFiPhyFddiPhyTypeIndex INTEGER } lpFiPhyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiPhy components. These components can be added." ::= { lpFiPhyRowStatusEntry 1 } lpFiPhyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiPhyRowStatusEntry 2 } lpFiPhyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiPhy tables." ::= { lpFiPhyRowStatusEntry 4 } lpFiPhyFddiPhyTypeIndex OBJECT-TYPE SYNTAX INTEGER { a(0), b(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiPhy tables." ::= { lpFiPhyRowStatusEntry 10 } lpFiPhyProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiPhyProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Fddi Phy component." ::= { lpFiPhy 10 } lpFiPhyProvEntry OBJECT-TYPE SYNTAX LpFiPhyProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiPhyProvTable." INDEX { lpIndex, lpFiIndex, lpFiPhyFddiPhyTypeIndex } ::= { lpFiPhyProvTable 1 } LpFiPhyProvEntry ::= SEQUENCE { lpFiPhyLerCutoff Unsigned32, lpFiPhyLerAlarm Unsigned32, lpFiPhyLinkErrorMonitor INTEGER } lpFiPhyLerCutoff OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-write STATUS mandatory DESCRIPTION "The lerCutoff attribute contains the link error rate estimate at which a link connection will be broken. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported." DEFVAL { 7 } ::= { lpFiPhyProvEntry 1 } lpFiPhyLerAlarm OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-write STATUS mandatory DESCRIPTION "The lerAlarm attribute contains the link error rate estimate at which a link connection will generate an alarm. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported" DEFVAL { 8 } ::= { lpFiPhyProvEntry 2 } lpFiPhyLinkErrorMonitor OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The linkErrorMonitor attribute is used to select the state of the link error monitor for the associated Phy component. If enabled, the link error monitor will send the correct test status to the neighboring station. If disabled, the link error monitor will always send a test passed status to the neighboring station." DEFVAL { enabled } ::= { lpFiPhyProvEntry 3 } lpFiPhyOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiPhyOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Fddi Phy component." ::= { lpFiPhy 11 } lpFiPhyOperEntry OBJECT-TYPE SYNTAX LpFiPhyOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiPhyOperTable." INDEX { lpIndex, lpFiIndex, lpFiPhyFddiPhyTypeIndex } ::= { lpFiPhyOperTable 1 } LpFiPhyOperEntry ::= SEQUENCE { lpFiPhyNeighborType INTEGER, lpFiPhyLctFailCounts Counter32, lpFiPhyLerEstimate Unsigned32, lpFiPhyLemRejectCounts Counter32, lpFiPhyLemCounts Counter32, lpFiPhyPcmState INTEGER, lpFiPhyLerFlag INTEGER, lpFiPhySignalState INTEGER, lpFiPhySignalBitsRcvd OCTET STRING, lpFiPhySignalBitsTxmt OCTET STRING } lpFiPhyNeighborType OBJECT-TYPE SYNTAX INTEGER { a(1), b(2), s(3), m(4), none(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the neighbor type of the neighbor physical layer." ::= { lpFiPhyOperEntry 4 } lpFiPhyLctFailCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lctFailCounts attribute contains the number of consecutive times the Link Confidence Test (LCT) has failed. This counter will wrap around after it reaches its maximum value." ::= { lpFiPhyOperEntry 13 } lpFiPhyLerEstimate OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-only STATUS mandatory DESCRIPTION "The lerEstimate attribute contains a long term average link error rate. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported" ::= { lpFiPhyOperEntry 14 } lpFiPhyLemRejectCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lemRejectCounts attribute contains the number of times that a link has been rejected. This counter will wrap around after it reaches its maximum value." ::= { lpFiPhyOperEntry 15 } lpFiPhyLemCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lemCounts attribute contains the aggregate link error monitor error count. This counter is set to zero only on station initialization. This counter will wrap around after it reaches its maximum value." ::= { lpFiPhyOperEntry 16 } lpFiPhyPcmState OBJECT-TYPE SYNTAX INTEGER { off(1), break(2), trace(3), connect(4), next(5), signal(6), join(7), verify(8), active(9), maint(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The pcmState, physical connection manager (PCM), state indicates the current state of the PCM state machine." ::= { lpFiPhyOperEntry 18 } lpFiPhyLerFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The lerFlag attribute indicates when the link error rate estimate is less than or equal to the link error rate alarm. If true, the value of the link error rate estimate is less than or equal to the link error rate alarm. If false, the value of the link error rate estimate is greater than the link error rate alarm." ::= { lpFiPhyOperEntry 20 } lpFiPhySignalState OBJECT-TYPE SYNTAX INTEGER { escape(0), phyTypeL(1), phyTypeH(2), accept(3), lctLengthL(4), lctLengthH(5), macAvail(6), lctResult(7), macLoop(8), macOnPhy(9), signalingDone(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The signalState attribute contains the current physical connection manager (PCM) signal bit being transmitted, or was transmitted, during the PCM signal state." ::= { lpFiPhyOperEntry 23 } lpFiPhySignalBitsRcvd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The signalBitsRcvd attribute contains the current physical connection manager (PCM) signal bits received. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)" ::= { lpFiPhyOperEntry 24 } lpFiPhySignalBitsTxmt OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The signalBitsTxmt attribute contains the current physical connection manager (PCM) signal bits transmitted. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)" ::= { lpFiPhyOperEntry 25 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. lpFiTest OBJECT IDENTIFIER ::= { lpFi 5 } lpFiTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpFiTest components." ::= { lpFiTest 1 } lpFiTestRowStatusEntry OBJECT-TYPE SYNTAX LpFiTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpFiTest component." INDEX { lpIndex, lpFiIndex, lpFiTestIndex } ::= { lpFiTestRowStatusTable 1 } LpFiTestRowStatusEntry ::= SEQUENCE { lpFiTestRowStatus RowStatus, lpFiTestComponentName DisplayString, lpFiTestStorageType StorageType, lpFiTestIndex NonReplicated } lpFiTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpFiTest components. These components cannot be added nor deleted." ::= { lpFiTestRowStatusEntry 1 } lpFiTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpFiTestRowStatusEntry 2 } lpFiTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpFiTest tables." ::= { lpFiTestRowStatusEntry 4 } lpFiTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpFiTest tables." ::= { lpFiTestRowStatusEntry 10 } lpFiTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { lpFiTest 10 } lpFiTestPTOEntry OBJECT-TYPE SYNTAX LpFiTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiTestPTOTable." INDEX { lpIndex, lpFiIndex, lpFiTestIndex } ::= { lpFiTestPTOTable 1 } LpFiTestPTOEntry ::= SEQUENCE { lpFiTestType INTEGER, lpFiTestFrmSize Unsigned32, lpFiTestDuration Unsigned32 } lpFiTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { lpFiTestPTOEntry 1 } lpFiTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { lpFiTestPTOEntry 2 } lpFiTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { lpFiTestPTOEntry 3 } lpFiTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFiTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { lpFiTest 11 } lpFiTestResultsEntry OBJECT-TYPE SYNTAX LpFiTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpFiTestResultsTable." INDEX { lpIndex, lpFiIndex, lpFiTestIndex } ::= { lpFiTestResultsTable 1 } LpFiTestResultsEntry ::= SEQUENCE { lpFiTestElapsedTime Counter32, lpFiTestTimeRemaining Unsigned32, lpFiTestCauseOfTermination INTEGER, lpFiTestFrmTx PassportCounter64, lpFiTestBitsTx PassportCounter64, lpFiTestFrmRx PassportCounter64, lpFiTestBitsRx PassportCounter64, lpFiTestErroredFrmRx PassportCounter64 } lpFiTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { lpFiTestResultsEntry 4 } lpFiTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { lpFiTestResultsEntry 5 } lpFiTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { lpFiTestResultsEntry 6 } lpFiTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { lpFiTestResultsEntry 7 } lpFiTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { lpFiTestResultsEntry 8 } lpFiTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpFiTestResultsEntry 9 } lpFiTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpFiTestResultsEntry 10 } lpFiTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpFiTestResultsEntry 11 } -- Lp/n TokenRing/n -- This component defines an instance of a Token Ring interface -- attached to a ring. One instance of this component must be created -- for each hardware interface. Each interface must be provisioned -- prior to inserting into the ring. lpTr OBJECT IDENTIFIER ::= { lp 13 } lpTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTr components." ::= { lpTr 1 } lpTrRowStatusEntry OBJECT-TYPE SYNTAX LpTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTr component." INDEX { lpIndex, lpTrIndex } ::= { lpTrRowStatusTable 1 } LpTrRowStatusEntry ::= SEQUENCE { lpTrRowStatus RowStatus, lpTrComponentName DisplayString, lpTrStorageType StorageType, lpTrIndex Integer32 } lpTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTr components. These components can be added and deleted." ::= { lpTrRowStatusEntry 1 } lpTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrRowStatusEntry 2 } lpTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTr tables." ::= { lpTrRowStatusEntry 4 } lpTrIndex OBJECT-TYPE SYNTAX Integer32 (0..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTr tables." ::= { lpTrRowStatusEntry 10 } lpTrCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { lpTr 10 } lpTrCidDataEntry OBJECT-TYPE SYNTAX LpTrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrCidDataTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrCidDataTable 1 } LpTrCidDataEntry ::= SEQUENCE { lpTrCustomerIdentifier Unsigned32 } lpTrCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { lpTrCidDataEntry 1 } lpTrIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { lpTr 11 } lpTrIfEntryEntry OBJECT-TYPE SYNTAX LpTrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrIfEntryTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrIfEntryTable 1 } LpTrIfEntryEntry ::= SEQUENCE { lpTrIfAdminStatus INTEGER, lpTrIfIndex InterfaceIndex } lpTrIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpTrIfEntryEntry 1 } lpTrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { lpTrIfEntryEntry 2 } lpTrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Token Ring port." ::= { lpTr 12 } lpTrProvEntry OBJECT-TYPE SYNTAX LpTrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrProvTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrProvTable 1 } LpTrProvEntry ::= SEQUENCE { lpTrRingSpeed INTEGER, lpTrMonitorParticipate INTEGER, lpTrFunctionalAddress MacAddress, lpTrNodeAddress MacAddress, lpTrGroupAddress MacAddress, lpTrProductId AsciiString, lpTrApplicationFramerName Link } lpTrRingSpeed OBJECT-TYPE SYNTAX INTEGER { fourMegabit(3), sixteenMegabit(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the ring speed at the next insertion into the ring. Note that all the interfaces on a ring must operate at the same speed." DEFVAL { sixteenMegabit } ::= { lpTrProvEntry 1 } lpTrMonitorParticipate OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines whether the interface will participate in the active monitor selection process." DEFVAL { false } ::= { lpTrProvEntry 2 } lpTrFunctionalAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a bit mask of all token ring functional addresses for which this interface will accept frames. The address is displayed in canonical form." DEFVAL { '0300feff8f01'H } ::= { lpTrProvEntry 3 } lpTrNodeAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the primary, node specific address recognized by this interface. If an operator does not provision a MAC address, the interface will use a predefined, permanently assigned address. A valid node address must not be any of the following: a broadcast address, a group address, a functional address or a null address. A node address should be entered in the canonical form." DEFVAL { '000000000000'H } ::= { lpTrProvEntry 4 } lpTrGroupAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the group address for which this interface will accept frames. The address is displayed in canonical form. For a valid group address, the least significant bit of the first octet should be set to 1. Currently, only one group address can be provisioned for one interface." DEFVAL { '030001000000'H } ::= { lpTrProvEntry 5 } lpTrProductId OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to identify the host system attached to this interface. This information is transmitted in response to Request Station Attachment MAC frames." DEFVAL { '4c414e20546f6b656e2052696e67'H } -- "LAN Token Ring" ::= { lpTrProvEntry 6 } lpTrApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Tr component." ::= { lpTrProvEntry 7 } lpTrAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { lpTr 13 } lpTrAdminInfoEntry OBJECT-TYPE SYNTAX LpTrAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrAdminInfoTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrAdminInfoTable 1 } LpTrAdminInfoEntry ::= SEQUENCE { lpTrVendor AsciiString, lpTrCommentText AsciiString } lpTrVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { lpTrAdminInfoEntry 1 } lpTrCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { lpTrAdminInfoEntry 2 } lpTrStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { lpTr 15 } lpTrStateEntry OBJECT-TYPE SYNTAX LpTrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrStateTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrStateTable 1 } LpTrStateEntry ::= SEQUENCE { lpTrAdminState INTEGER, lpTrOperationalState INTEGER, lpTrUsageState INTEGER } lpTrAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { lpTrStateEntry 1 } lpTrOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { lpTrStateEntry 2 } lpTrUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { lpTrStateEntry 3 } lpTrOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { lpTr 16 } lpTrOperStatusEntry OBJECT-TYPE SYNTAX LpTrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrOperStatusTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrOperStatusTable 1 } LpTrOperStatusEntry ::= SEQUENCE { lpTrSnmpOperStatus INTEGER } lpTrSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpTrOperStatusEntry 1 } lpTrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Token Ring component." ::= { lpTr 17 } lpTrOperEntry OBJECT-TYPE SYNTAX LpTrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrOperTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrOperTable 1 } LpTrOperEntry ::= SEQUENCE { lpTrMacAddress MacAddress, lpTrRingState INTEGER, lpTrRingStatus OCTET STRING, lpTrRingOpenStatus INTEGER, lpTrUpStream MacAddress, lpTrChipSet INTEGER, lpTrLastTimeBeaconSent EnterpriseDateAndTime } lpTrMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in canonical form. The non-canonical version of this address is indicated in ncMacAddress." DEFVAL { '000000000000'H } ::= { lpTrOperEntry 2 } lpTrRingState OBJECT-TYPE SYNTAX INTEGER { opened(1), closed(2), opening(3), closing(4), openFailure(5), ringFailure(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of the current interface state with respect to entering or leaving the ring." DEFVAL { ringFailure } ::= { lpTrOperEntry 4 } lpTrRingStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of the current interface status after the station has entered the ring. The value is a sum of values, one for each currently applicable condition. Before the station attempts an open this attribute has the value of noStatus. noProblems = 0, ringRecovery = 32, singleStation = 64, removeReceived = 256, reserved = 512, autoRemovalError = 1024, lobeWireFault = 2048, transmitBeacon = 4096, softError = 8192, hardError = 16384, signalLoss = 32768, noStatus = 131072 Description of bits: noProblems(0) notused1(1) notused2(2) notused3(3) notused4(4) ringRecovery(5) singleStation(6) notused7(7) removeReceived(8) reserved(9) autoRemovalError(10) lobeWireFault(11) transmitBeacon(12) softError(13) hardError(14) signalLoss(15) notused16(16) noStatus(17)" DEFVAL { '000040'H } ::= { lpTrOperEntry 5 } lpTrRingOpenStatus OBJECT-TYPE SYNTAX INTEGER { noOpen(1), badParam(2), lobeFailed(3), signalLoss(4), insertionTimeout(5), ringFailed(6), beaconing(7), duplicateMac(8), requestFailed(9), removeReceived(10), open(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates what happened the last time the station attempted to enter into the ring." DEFVAL { noOpen } ::= { lpTrOperEntry 6 } lpTrUpStream OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in canonical form. The non- canonical version of this address is indicated in ncUpStream." DEFVAL { '000000000000'H } ::= { lpTrOperEntry 7 } lpTrChipSet OBJECT-TYPE SYNTAX INTEGER { ibm16(1), titms380(2), titms380c16(3), titms380c26(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies the hardware chip set in use by an interface." DEFVAL { titms380c16 } ::= { lpTrOperEntry 9 } lpTrLastTimeBeaconSent OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time at which a Beacon frame was last transmitted on this interface." ::= { lpTrOperEntry 10 } lpTrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical information for the Token Ring port." ::= { lpTr 18 } lpTrStatsEntry OBJECT-TYPE SYNTAX LpTrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrStatsTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrStatsTable 1 } LpTrStatsEntry ::= SEQUENCE { lpTrLineErrors Counter32, lpTrBurstErrors Counter32, lpTrAcErrors Counter32, lpTrAbortTransErrors Counter32, lpTrInternalErrors Counter32, lpTrLostFrameErrors Counter32, lpTrReceiveCongestions Counter32, lpTrFrameCopiedErrors Counter32, lpTrTokenErrors Counter32, lpTrSoftErrors Counter32, lpTrHardErrors Counter32, lpTrSignalLoss Counter32, lpTrTransmitBeacons Counter32, lpTrRingRecoverys Counter32, lpTrLobeWires Counter32, lpTrRemoveRings Counter32, lpTrSingleStation Counter32, lpTrFreqErrors Counter32 } lpTrLineErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of frames or tokens copied or repeated by a station where there is a non-data bit or a FCS error. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 2 } lpTrBurstErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the station detects the absence of transitions for five consecutive half-bit times. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 3 } lpTrAcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times that a station can not set the AC bits properly. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 4 } lpTrAbortTransErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of aborted frames. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 5 } lpTrInternalErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of internal errors. When the value of the counter soars up quickly, it indicates a potential hardware problem. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 6 } lpTrLostFrameErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station is transmitting and its TRR timer expires. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 7 } lpTrReceiveCongestions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station is supposed to receive a frame but cannot due to lack of buffer space. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 8 } lpTrFrameCopiedErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station receives a frame addressed to its specific address and detects that the A bit is set. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 9 } lpTrTokenErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station acting as the active monitor recognizes an error condition that needs a token transmission. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 10 } lpTrSoftErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of soft errors or the number of Report Error Mac frames the station has transmitted. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 11 } lpTrHardErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times this interface has detected an immediately recoverable fatal error. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 12 } lpTrSignalLoss OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times signal condition has been lost. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 13 } lpTrTransmitBeacons OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of beacon frames transmitted. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 14 } lpTrRingRecoverys OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the ring has been purged. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 15 } lpTrLobeWires OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the interface has detected a short circuit in the lobe data path. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 16 } lpTrRemoveRings OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of Remove Ring Station Mac frames received. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 17 } lpTrSingleStation OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the station has determined it is the only one on the ring. This is not necessarily an error. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 18 } lpTrFreqErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of signal frequency errors detected. This counter wraps around when the maximum value is reached." ::= { lpTrStatsEntry 19 } lpTrNcMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the TokenRing port component related to non-canonical MAC addresses." ::= { lpTr 20 } lpTrNcMacOperEntry OBJECT-TYPE SYNTAX LpTrNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrNcMacOperTable." INDEX { lpIndex, lpTrIndex } ::= { lpTrNcMacOperTable 1 } LpTrNcMacOperEntry ::= SEQUENCE { lpTrNcMacAddress MacAddress, lpTrNcUpStream MacAddress } lpTrNcMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in non-canonical form. The canonical version of this address is indicated in macAddress." ::= { lpTrNcMacOperEntry 1 } lpTrNcUpStream OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in non-canonical form. The canonical version of this address is indicated in upStream." ::= { lpTrNcMacOperEntry 2 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. lpTrLt OBJECT IDENTIFIER ::= { lpTr 2 } lpTrLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLt components." ::= { lpTrLt 1 } lpTrLtRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLt component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex } ::= { lpTrLtRowStatusTable 1 } LpTrLtRowStatusEntry ::= SEQUENCE { lpTrLtRowStatus RowStatus, lpTrLtComponentName DisplayString, lpTrLtStorageType StorageType, lpTrLtIndex NonReplicated } lpTrLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLt components. These components cannot be added nor deleted." ::= { lpTrLtRowStatusEntry 1 } lpTrLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtRowStatusEntry 2 } lpTrLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLt tables." ::= { lpTrLtRowStatusEntry 4 } lpTrLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLt tables." ::= { lpTrLtRowStatusEntry 10 } lpTrLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLt 20 } lpTrLtTopEntry OBJECT-TYPE SYNTAX LpTrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex } ::= { lpTrLtTopTable 1 } LpTrLtTopEntry ::= SEQUENCE { lpTrLtTData AsciiString } lpTrLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. lpTrLtFrmCmp OBJECT IDENTIFIER ::= { lpTrLt 2 } lpTrLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFrmCmp components." ::= { lpTrLtFrmCmp 1 } lpTrLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFrmCmp component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFrmCmpIndex } ::= { lpTrLtFrmCmpRowStatusTable 1 } LpTrLtFrmCmpRowStatusEntry ::= SEQUENCE { lpTrLtFrmCmpRowStatus RowStatus, lpTrLtFrmCmpComponentName DisplayString, lpTrLtFrmCmpStorageType StorageType, lpTrLtFrmCmpIndex NonReplicated } lpTrLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFrmCmp components. These components cannot be added nor deleted." ::= { lpTrLtFrmCmpRowStatusEntry 1 } lpTrLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFrmCmpRowStatusEntry 2 } lpTrLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFrmCmp tables." ::= { lpTrLtFrmCmpRowStatusEntry 4 } lpTrLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFrmCmp tables." ::= { lpTrLtFrmCmpRowStatusEntry 10 } lpTrLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFrmCmp 10 } lpTrLtFrmCmpTopEntry OBJECT-TYPE SYNTAX LpTrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFrmCmpTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFrmCmpIndex } ::= { lpTrLtFrmCmpTopTable 1 } LpTrLtFrmCmpTopEntry ::= SEQUENCE { lpTrLtFrmCmpTData AsciiString } lpTrLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. lpTrLtFrmCpy OBJECT IDENTIFIER ::= { lpTrLt 3 } lpTrLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFrmCpy components." ::= { lpTrLtFrmCpy 1 } lpTrLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFrmCpy component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFrmCpyIndex } ::= { lpTrLtFrmCpyRowStatusTable 1 } LpTrLtFrmCpyRowStatusEntry ::= SEQUENCE { lpTrLtFrmCpyRowStatus RowStatus, lpTrLtFrmCpyComponentName DisplayString, lpTrLtFrmCpyStorageType StorageType, lpTrLtFrmCpyIndex NonReplicated } lpTrLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFrmCpy components. These components cannot be added nor deleted." ::= { lpTrLtFrmCpyRowStatusEntry 1 } lpTrLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFrmCpyRowStatusEntry 2 } lpTrLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFrmCpy tables." ::= { lpTrLtFrmCpyRowStatusEntry 4 } lpTrLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFrmCpy tables." ::= { lpTrLtFrmCpyRowStatusEntry 10 } lpTrLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFrmCpy 10 } lpTrLtFrmCpyTopEntry OBJECT-TYPE SYNTAX LpTrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFrmCpyTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFrmCpyIndex } ::= { lpTrLtFrmCpyTopTable 1 } LpTrLtFrmCpyTopEntry ::= SEQUENCE { lpTrLtFrmCpyTData AsciiString } lpTrLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. lpTrLtPrtCfg OBJECT IDENTIFIER ::= { lpTrLt 4 } lpTrLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtPrtCfg components." ::= { lpTrLtPrtCfg 1 } lpTrLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtPrtCfg component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtPrtCfgIndex } ::= { lpTrLtPrtCfgRowStatusTable 1 } LpTrLtPrtCfgRowStatusEntry ::= SEQUENCE { lpTrLtPrtCfgRowStatus RowStatus, lpTrLtPrtCfgComponentName DisplayString, lpTrLtPrtCfgStorageType StorageType, lpTrLtPrtCfgIndex NonReplicated } lpTrLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtPrtCfg components. These components cannot be added nor deleted." ::= { lpTrLtPrtCfgRowStatusEntry 1 } lpTrLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtPrtCfgRowStatusEntry 2 } lpTrLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtPrtCfg tables." ::= { lpTrLtPrtCfgRowStatusEntry 4 } lpTrLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtPrtCfg tables." ::= { lpTrLtPrtCfgRowStatusEntry 10 } lpTrLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtPrtCfg 10 } lpTrLtPrtCfgTopEntry OBJECT-TYPE SYNTAX LpTrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtPrtCfgTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtPrtCfgIndex } ::= { lpTrLtPrtCfgTopTable 1 } LpTrLtPrtCfgTopEntry ::= SEQUENCE { lpTrLtPrtCfgTData AsciiString } lpTrLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. lpTrLtFb OBJECT IDENTIFIER ::= { lpTrLt 5 } lpTrLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFb components." ::= { lpTrLtFb 1 } lpTrLtFbRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFb component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex } ::= { lpTrLtFbRowStatusTable 1 } LpTrLtFbRowStatusEntry ::= SEQUENCE { lpTrLtFbRowStatus RowStatus, lpTrLtFbComponentName DisplayString, lpTrLtFbStorageType StorageType, lpTrLtFbIndex NonReplicated } lpTrLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFb components. These components cannot be added nor deleted." ::= { lpTrLtFbRowStatusEntry 1 } lpTrLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbRowStatusEntry 2 } lpTrLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFb tables." ::= { lpTrLtFbRowStatusEntry 4 } lpTrLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFb tables." ::= { lpTrLtFbRowStatusEntry 10 } lpTrLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFb 20 } lpTrLtFbTopEntry OBJECT-TYPE SYNTAX LpTrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex } ::= { lpTrLtFbTopTable 1 } LpTrLtFbTopEntry ::= SEQUENCE { lpTrLtFbTData AsciiString } lpTrLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. lpTrLtFbTxInfo OBJECT IDENTIFIER ::= { lpTrLtFb 2 } lpTrLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbTxInfo components." ::= { lpTrLtFbTxInfo 1 } lpTrLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbTxInfo component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbTxInfoIndex } ::= { lpTrLtFbTxInfoRowStatusTable 1 } LpTrLtFbTxInfoRowStatusEntry ::= SEQUENCE { lpTrLtFbTxInfoRowStatus RowStatus, lpTrLtFbTxInfoComponentName DisplayString, lpTrLtFbTxInfoStorageType StorageType, lpTrLtFbTxInfoIndex NonReplicated } lpTrLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbTxInfo components. These components cannot be added nor deleted." ::= { lpTrLtFbTxInfoRowStatusEntry 1 } lpTrLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbTxInfoRowStatusEntry 2 } lpTrLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbTxInfo tables." ::= { lpTrLtFbTxInfoRowStatusEntry 4 } lpTrLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbTxInfo tables." ::= { lpTrLtFbTxInfoRowStatusEntry 10 } lpTrLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbTxInfo 10 } lpTrLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX LpTrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbTxInfoTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbTxInfoIndex } ::= { lpTrLtFbTxInfoTopTable 1 } LpTrLtFbTxInfoTopEntry ::= SEQUENCE { lpTrLtFbTxInfoTData AsciiString } lpTrLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. lpTrLtFbFddiMac OBJECT IDENTIFIER ::= { lpTrLtFb 3 } lpTrLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbFddiMac components." ::= { lpTrLtFbFddiMac 1 } lpTrLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbFddiMac component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbFddiMacIndex } ::= { lpTrLtFbFddiMacRowStatusTable 1 } LpTrLtFbFddiMacRowStatusEntry ::= SEQUENCE { lpTrLtFbFddiMacRowStatus RowStatus, lpTrLtFbFddiMacComponentName DisplayString, lpTrLtFbFddiMacStorageType StorageType, lpTrLtFbFddiMacIndex NonReplicated } lpTrLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbFddiMac components. These components cannot be added nor deleted." ::= { lpTrLtFbFddiMacRowStatusEntry 1 } lpTrLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbFddiMacRowStatusEntry 2 } lpTrLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbFddiMac tables." ::= { lpTrLtFbFddiMacRowStatusEntry 4 } lpTrLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbFddiMac tables." ::= { lpTrLtFbFddiMacRowStatusEntry 10 } lpTrLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbFddiMac 10 } lpTrLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX LpTrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbFddiMacTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbFddiMacIndex } ::= { lpTrLtFbFddiMacTopTable 1 } LpTrLtFbFddiMacTopEntry ::= SEQUENCE { lpTrLtFbFddiMacTData AsciiString } lpTrLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. lpTrLtFbMacEnet OBJECT IDENTIFIER ::= { lpTrLtFb 4 } lpTrLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbMacEnet components." ::= { lpTrLtFbMacEnet 1 } lpTrLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbMacEnet component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbMacEnetIndex } ::= { lpTrLtFbMacEnetRowStatusTable 1 } LpTrLtFbMacEnetRowStatusEntry ::= SEQUENCE { lpTrLtFbMacEnetRowStatus RowStatus, lpTrLtFbMacEnetComponentName DisplayString, lpTrLtFbMacEnetStorageType StorageType, lpTrLtFbMacEnetIndex NonReplicated } lpTrLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbMacEnet components. These components cannot be added nor deleted." ::= { lpTrLtFbMacEnetRowStatusEntry 1 } lpTrLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbMacEnetRowStatusEntry 2 } lpTrLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbMacEnet tables." ::= { lpTrLtFbMacEnetRowStatusEntry 4 } lpTrLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbMacEnet tables." ::= { lpTrLtFbMacEnetRowStatusEntry 10 } lpTrLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbMacEnet 10 } lpTrLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX LpTrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbMacEnetTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbMacEnetIndex } ::= { lpTrLtFbMacEnetTopTable 1 } LpTrLtFbMacEnetTopEntry ::= SEQUENCE { lpTrLtFbMacEnetTData AsciiString } lpTrLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. lpTrLtFbMacTr OBJECT IDENTIFIER ::= { lpTrLtFb 5 } lpTrLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbMacTr components." ::= { lpTrLtFbMacTr 1 } lpTrLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbMacTr component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbMacTrIndex } ::= { lpTrLtFbMacTrRowStatusTable 1 } LpTrLtFbMacTrRowStatusEntry ::= SEQUENCE { lpTrLtFbMacTrRowStatus RowStatus, lpTrLtFbMacTrComponentName DisplayString, lpTrLtFbMacTrStorageType StorageType, lpTrLtFbMacTrIndex NonReplicated } lpTrLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbMacTr components. These components cannot be added nor deleted." ::= { lpTrLtFbMacTrRowStatusEntry 1 } lpTrLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbMacTrRowStatusEntry 2 } lpTrLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbMacTr tables." ::= { lpTrLtFbMacTrRowStatusEntry 4 } lpTrLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbMacTr tables." ::= { lpTrLtFbMacTrRowStatusEntry 10 } lpTrLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbMacTr 10 } lpTrLtFbMacTrTopEntry OBJECT-TYPE SYNTAX LpTrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbMacTrTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbMacTrIndex } ::= { lpTrLtFbMacTrTopTable 1 } LpTrLtFbMacTrTopEntry ::= SEQUENCE { lpTrLtFbMacTrTData AsciiString } lpTrLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. lpTrLtFbData OBJECT IDENTIFIER ::= { lpTrLtFb 6 } lpTrLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbData components." ::= { lpTrLtFbData 1 } lpTrLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbData component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbDataIndex } ::= { lpTrLtFbDataRowStatusTable 1 } LpTrLtFbDataRowStatusEntry ::= SEQUENCE { lpTrLtFbDataRowStatus RowStatus, lpTrLtFbDataComponentName DisplayString, lpTrLtFbDataStorageType StorageType, lpTrLtFbDataIndex NonReplicated } lpTrLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbData components. These components cannot be added nor deleted." ::= { lpTrLtFbDataRowStatusEntry 1 } lpTrLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbDataRowStatusEntry 2 } lpTrLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbData tables." ::= { lpTrLtFbDataRowStatusEntry 4 } lpTrLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbData tables." ::= { lpTrLtFbDataRowStatusEntry 10 } lpTrLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbData 10 } lpTrLtFbDataTopEntry OBJECT-TYPE SYNTAX LpTrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbDataTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbDataIndex } ::= { lpTrLtFbDataTopTable 1 } LpTrLtFbDataTopEntry ::= SEQUENCE { lpTrLtFbDataTData AsciiString } lpTrLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. lpTrLtFbIpH OBJECT IDENTIFIER ::= { lpTrLtFb 7 } lpTrLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbIpH components." ::= { lpTrLtFbIpH 1 } lpTrLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbIpH component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbIpHIndex } ::= { lpTrLtFbIpHRowStatusTable 1 } LpTrLtFbIpHRowStatusEntry ::= SEQUENCE { lpTrLtFbIpHRowStatus RowStatus, lpTrLtFbIpHComponentName DisplayString, lpTrLtFbIpHStorageType StorageType, lpTrLtFbIpHIndex NonReplicated } lpTrLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbIpH components. These components cannot be added nor deleted." ::= { lpTrLtFbIpHRowStatusEntry 1 } lpTrLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbIpHRowStatusEntry 2 } lpTrLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbIpH tables." ::= { lpTrLtFbIpHRowStatusEntry 4 } lpTrLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbIpH tables." ::= { lpTrLtFbIpHRowStatusEntry 10 } lpTrLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbIpH 10 } lpTrLtFbIpHTopEntry OBJECT-TYPE SYNTAX LpTrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbIpHTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbIpHIndex } ::= { lpTrLtFbIpHTopTable 1 } LpTrLtFbIpHTopEntry ::= SEQUENCE { lpTrLtFbIpHTData AsciiString } lpTrLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. lpTrLtFbLlch OBJECT IDENTIFIER ::= { lpTrLtFb 8 } lpTrLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbLlch components." ::= { lpTrLtFbLlch 1 } lpTrLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbLlch component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbLlchIndex } ::= { lpTrLtFbLlchRowStatusTable 1 } LpTrLtFbLlchRowStatusEntry ::= SEQUENCE { lpTrLtFbLlchRowStatus RowStatus, lpTrLtFbLlchComponentName DisplayString, lpTrLtFbLlchStorageType StorageType, lpTrLtFbLlchIndex NonReplicated } lpTrLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbLlch components. These components cannot be added nor deleted." ::= { lpTrLtFbLlchRowStatusEntry 1 } lpTrLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbLlchRowStatusEntry 2 } lpTrLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbLlch tables." ::= { lpTrLtFbLlchRowStatusEntry 4 } lpTrLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbLlch tables." ::= { lpTrLtFbLlchRowStatusEntry 10 } lpTrLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbLlch 10 } lpTrLtFbLlchTopEntry OBJECT-TYPE SYNTAX LpTrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbLlchTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbLlchIndex } ::= { lpTrLtFbLlchTopTable 1 } LpTrLtFbLlchTopEntry ::= SEQUENCE { lpTrLtFbLlchTData AsciiString } lpTrLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. lpTrLtFbAppleH OBJECT IDENTIFIER ::= { lpTrLtFb 9 } lpTrLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbAppleH components." ::= { lpTrLtFbAppleH 1 } lpTrLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbAppleH component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbAppleHIndex } ::= { lpTrLtFbAppleHRowStatusTable 1 } LpTrLtFbAppleHRowStatusEntry ::= SEQUENCE { lpTrLtFbAppleHRowStatus RowStatus, lpTrLtFbAppleHComponentName DisplayString, lpTrLtFbAppleHStorageType StorageType, lpTrLtFbAppleHIndex NonReplicated } lpTrLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbAppleH components. These components cannot be added nor deleted." ::= { lpTrLtFbAppleHRowStatusEntry 1 } lpTrLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbAppleHRowStatusEntry 2 } lpTrLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbAppleH tables." ::= { lpTrLtFbAppleHRowStatusEntry 4 } lpTrLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbAppleH tables." ::= { lpTrLtFbAppleHRowStatusEntry 10 } lpTrLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbAppleH 10 } lpTrLtFbAppleHTopEntry OBJECT-TYPE SYNTAX LpTrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbAppleHTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbAppleHIndex } ::= { lpTrLtFbAppleHTopTable 1 } LpTrLtFbAppleHTopEntry ::= SEQUENCE { lpTrLtFbAppleHTData AsciiString } lpTrLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. lpTrLtFbIpxH OBJECT IDENTIFIER ::= { lpTrLtFb 10 } lpTrLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtFbIpxH components." ::= { lpTrLtFbIpxH 1 } lpTrLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtFbIpxH component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbIpxHIndex } ::= { lpTrLtFbIpxHRowStatusTable 1 } LpTrLtFbIpxHRowStatusEntry ::= SEQUENCE { lpTrLtFbIpxHRowStatus RowStatus, lpTrLtFbIpxHComponentName DisplayString, lpTrLtFbIpxHStorageType StorageType, lpTrLtFbIpxHIndex NonReplicated } lpTrLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtFbIpxH components. These components cannot be added nor deleted." ::= { lpTrLtFbIpxHRowStatusEntry 1 } lpTrLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtFbIpxHRowStatusEntry 2 } lpTrLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtFbIpxH tables." ::= { lpTrLtFbIpxHRowStatusEntry 4 } lpTrLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtFbIpxH tables." ::= { lpTrLtFbIpxHRowStatusEntry 10 } lpTrLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtFbIpxH 10 } lpTrLtFbIpxHTopEntry OBJECT-TYPE SYNTAX LpTrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtFbIpxHTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtFbIndex, lpTrLtFbIpxHIndex } ::= { lpTrLtFbIpxHTopTable 1 } LpTrLtFbIpxHTopEntry ::= SEQUENCE { lpTrLtFbIpxHTData AsciiString } lpTrLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. lpTrLtCntl OBJECT IDENTIFIER ::= { lpTrLt 6 } lpTrLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrLtCntl components." ::= { lpTrLtCntl 1 } lpTrLtCntlRowStatusEntry OBJECT-TYPE SYNTAX LpTrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrLtCntl component." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtCntlIndex } ::= { lpTrLtCntlRowStatusTable 1 } LpTrLtCntlRowStatusEntry ::= SEQUENCE { lpTrLtCntlRowStatus RowStatus, lpTrLtCntlComponentName DisplayString, lpTrLtCntlStorageType StorageType, lpTrLtCntlIndex NonReplicated } lpTrLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrLtCntl components. These components cannot be added nor deleted." ::= { lpTrLtCntlRowStatusEntry 1 } lpTrLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrLtCntlRowStatusEntry 2 } lpTrLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrLtCntl tables." ::= { lpTrLtCntlRowStatusEntry 4 } lpTrLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrLtCntl tables." ::= { lpTrLtCntlRowStatusEntry 10 } lpTrLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpTrLtCntl 10 } lpTrLtCntlTopEntry OBJECT-TYPE SYNTAX LpTrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrLtCntlTopTable." INDEX { lpIndex, lpTrIndex, lpTrLtIndex, lpTrLtCntlIndex } ::= { lpTrLtCntlTopTable 1 } LpTrLtCntlTopEntry ::= SEQUENCE { lpTrLtCntlTData AsciiString } lpTrLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpTrLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. lpTrTest OBJECT IDENTIFIER ::= { lpTr 5 } lpTrTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpTrTest components." ::= { lpTrTest 1 } lpTrTestRowStatusEntry OBJECT-TYPE SYNTAX LpTrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpTrTest component." INDEX { lpIndex, lpTrIndex, lpTrTestIndex } ::= { lpTrTestRowStatusTable 1 } LpTrTestRowStatusEntry ::= SEQUENCE { lpTrTestRowStatus RowStatus, lpTrTestComponentName DisplayString, lpTrTestStorageType StorageType, lpTrTestIndex NonReplicated } lpTrTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpTrTest components. These components cannot be added nor deleted." ::= { lpTrTestRowStatusEntry 1 } lpTrTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpTrTestRowStatusEntry 2 } lpTrTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpTrTest tables." ::= { lpTrTestRowStatusEntry 4 } lpTrTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpTrTest tables." ::= { lpTrTestRowStatusEntry 10 } lpTrTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { lpTrTest 10 } lpTrTestPTOEntry OBJECT-TYPE SYNTAX LpTrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrTestPTOTable." INDEX { lpIndex, lpTrIndex, lpTrTestIndex } ::= { lpTrTestPTOTable 1 } LpTrTestPTOEntry ::= SEQUENCE { lpTrTestType INTEGER, lpTrTestFrmSize Unsigned32, lpTrTestDuration Unsigned32 } lpTrTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { lpTrTestPTOEntry 1 } lpTrTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { lpTrTestPTOEntry 2 } lpTrTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { lpTrTestPTOEntry 3 } lpTrTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { lpTrTest 11 } lpTrTestResultsEntry OBJECT-TYPE SYNTAX LpTrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpTrTestResultsTable." INDEX { lpIndex, lpTrIndex, lpTrTestIndex } ::= { lpTrTestResultsTable 1 } LpTrTestResultsEntry ::= SEQUENCE { lpTrTestElapsedTime Counter32, lpTrTestTimeRemaining Unsigned32, lpTrTestCauseOfTermination INTEGER, lpTrTestFrmTx PassportCounter64, lpTrTestBitsTx PassportCounter64, lpTrTestFrmRx PassportCounter64, lpTrTestBitsRx PassportCounter64, lpTrTestErroredFrmRx PassportCounter64 } lpTrTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { lpTrTestResultsEntry 4 } lpTrTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { lpTrTestResultsEntry 5 } lpTrTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { lpTrTestResultsEntry 6 } lpTrTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { lpTrTestResultsEntry 7 } lpTrTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { lpTrTestResultsEntry 8 } lpTrTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpTrTestResultsEntry 9 } lpTrTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpTrTestResultsEntry 10 } lpTrTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpTrTestResultsEntry 11 } -- Lp/n IlsForwarder/0 -- This component defines an instance of a IlsForwarder. At least one -- instance of this component must be provisioned if there is any AtmMpe -- component provisioned. lpIlsFwdr OBJECT IDENTIFIER ::= { lp 21 } lpIlsFwdrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdr components." ::= { lpIlsFwdr 1 } lpIlsFwdrRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdr component." INDEX { lpIndex, lpIlsFwdrIndex } ::= { lpIlsFwdrRowStatusTable 1 } LpIlsFwdrRowStatusEntry ::= SEQUENCE { lpIlsFwdrRowStatus RowStatus, lpIlsFwdrComponentName DisplayString, lpIlsFwdrStorageType StorageType, lpIlsFwdrIndex Integer32 } lpIlsFwdrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdr components. These components can be added and deleted." ::= { lpIlsFwdrRowStatusEntry 1 } lpIlsFwdrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrRowStatusEntry 2 } lpIlsFwdrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdr tables." ::= { lpIlsFwdrRowStatusEntry 4 } lpIlsFwdrIndex OBJECT-TYPE SYNTAX Integer32 (0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdr tables." ::= { lpIlsFwdrRowStatusEntry 10 } lpIlsFwdrIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { lpIlsFwdr 11 } lpIlsFwdrIfEntryEntry OBJECT-TYPE SYNTAX LpIlsFwdrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrIfEntryTable." INDEX { lpIndex, lpIlsFwdrIndex } ::= { lpIlsFwdrIfEntryTable 1 } LpIlsFwdrIfEntryEntry ::= SEQUENCE { lpIlsFwdrIfAdminStatus INTEGER, lpIlsFwdrIfIndex InterfaceIndex } lpIlsFwdrIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpIlsFwdrIfEntryEntry 1 } lpIlsFwdrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { lpIlsFwdrIfEntryEntry 2 } lpIlsFwdrStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { lpIlsFwdr 12 } lpIlsFwdrStateEntry OBJECT-TYPE SYNTAX LpIlsFwdrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrStateTable." INDEX { lpIndex, lpIlsFwdrIndex } ::= { lpIlsFwdrStateTable 1 } LpIlsFwdrStateEntry ::= SEQUENCE { lpIlsFwdrAdminState INTEGER, lpIlsFwdrOperationalState INTEGER, lpIlsFwdrUsageState INTEGER } lpIlsFwdrAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { lpIlsFwdrStateEntry 1 } lpIlsFwdrOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { lpIlsFwdrStateEntry 2 } lpIlsFwdrUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { lpIlsFwdrStateEntry 3 } lpIlsFwdrOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { lpIlsFwdr 13 } lpIlsFwdrOperStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrOperStatusTable." INDEX { lpIndex, lpIlsFwdrIndex } ::= { lpIlsFwdrOperStatusTable 1 } LpIlsFwdrOperStatusEntry ::= SEQUENCE { lpIlsFwdrSnmpOperStatus INTEGER } lpIlsFwdrSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpIlsFwdrOperStatusEntry 1 } lpIlsFwdrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational frame statistics related attributes of the IlsForwarder component." ::= { lpIlsFwdr 14 } lpIlsFwdrStatsEntry OBJECT-TYPE SYNTAX LpIlsFwdrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrStatsTable." INDEX { lpIndex, lpIlsFwdrIndex } ::= { lpIlsFwdrStatsTable 1 } LpIlsFwdrStatsEntry ::= SEQUENCE { lpIlsFwdrFramesReceived PassportCounter64, lpIlsFwdrProcessedCount PassportCounter64, lpIlsFwdrErrorCount PassportCounter64, lpIlsFwdrFramesDiscarded PassportCounter64 } lpIlsFwdrFramesReceived OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that have been received by this card. This counter will wrap around after it reaches its maximum value." ::= { lpIlsFwdrStatsEntry 1 } lpIlsFwdrProcessedCount OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames successfully processed by this card. This counter will wrap around after it reaches its maximum value." ::= { lpIlsFwdrStatsEntry 2 } lpIlsFwdrErrorCount OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal errors detected in transferring frames from an ATM card to this card. A continuous increment of this count indicates that the hardware may probably be defective. This counter will wrap around after it reaches its maximum value." ::= { lpIlsFwdrStatsEntry 3 } lpIlsFwdrFramesDiscarded OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which are discarded due to local buffer congestion. This counter will wrap around after it reaches its maximum value." ::= { lpIlsFwdrStatsEntry 4 } lpIlsFwdrLinkToTrafficSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLinkToTrafficSourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute contains a list of components that are using this IlsForwarder." ::= { lpIlsFwdr 312 } lpIlsFwdrLinkToTrafficSourceEntry OBJECT-TYPE SYNTAX LpIlsFwdrLinkToTrafficSourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLinkToTrafficSourceTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLinkToTrafficSourceValue } ::= { lpIlsFwdrLinkToTrafficSourceTable 1 } LpIlsFwdrLinkToTrafficSourceEntry ::= SEQUENCE { lpIlsFwdrLinkToTrafficSourceValue Link } lpIlsFwdrLinkToTrafficSourceValue OBJECT-TYPE SYNTAX Link ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the lpIlsFwdrLinkToTrafficSourceTable." ::= { lpIlsFwdrLinkToTrafficSourceEntry 1 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. lpIlsFwdrLt OBJECT IDENTIFIER ::= { lpIlsFwdr 2 } lpIlsFwdrLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLt components." ::= { lpIlsFwdrLt 1 } lpIlsFwdrLtRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLt component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex } ::= { lpIlsFwdrLtRowStatusTable 1 } LpIlsFwdrLtRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtRowStatus RowStatus, lpIlsFwdrLtComponentName DisplayString, lpIlsFwdrLtStorageType StorageType, lpIlsFwdrLtIndex NonReplicated } lpIlsFwdrLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLt components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtRowStatusEntry 1 } lpIlsFwdrLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtRowStatusEntry 2 } lpIlsFwdrLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLt tables." ::= { lpIlsFwdrLtRowStatusEntry 4 } lpIlsFwdrLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLt tables." ::= { lpIlsFwdrLtRowStatusEntry 10 } lpIlsFwdrLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLt 20 } lpIlsFwdrLtTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex } ::= { lpIlsFwdrLtTopTable 1 } LpIlsFwdrLtTopEntry ::= SEQUENCE { lpIlsFwdrLtTData AsciiString } lpIlsFwdrLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. lpIlsFwdrLtFrmCmp OBJECT IDENTIFIER ::= { lpIlsFwdrLt 2 } lpIlsFwdrLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFrmCmp components." ::= { lpIlsFwdrLtFrmCmp 1 } lpIlsFwdrLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFrmCmp component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFrmCmpIndex } ::= { lpIlsFwdrLtFrmCmpRowStatusTable 1 } LpIlsFwdrLtFrmCmpRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFrmCmpRowStatus RowStatus, lpIlsFwdrLtFrmCmpComponentName DisplayString, lpIlsFwdrLtFrmCmpStorageType StorageType, lpIlsFwdrLtFrmCmpIndex NonReplicated } lpIlsFwdrLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFrmCmp components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFrmCmpRowStatusEntry 1 } lpIlsFwdrLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFrmCmpRowStatusEntry 2 } lpIlsFwdrLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFrmCmp tables." ::= { lpIlsFwdrLtFrmCmpRowStatusEntry 4 } lpIlsFwdrLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFrmCmp tables." ::= { lpIlsFwdrLtFrmCmpRowStatusEntry 10 } lpIlsFwdrLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFrmCmp 10 } lpIlsFwdrLtFrmCmpTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFrmCmpTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFrmCmpIndex } ::= { lpIlsFwdrLtFrmCmpTopTable 1 } LpIlsFwdrLtFrmCmpTopEntry ::= SEQUENCE { lpIlsFwdrLtFrmCmpTData AsciiString } lpIlsFwdrLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. lpIlsFwdrLtFrmCpy OBJECT IDENTIFIER ::= { lpIlsFwdrLt 3 } lpIlsFwdrLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFrmCpy components." ::= { lpIlsFwdrLtFrmCpy 1 } lpIlsFwdrLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFrmCpy component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFrmCpyIndex } ::= { lpIlsFwdrLtFrmCpyRowStatusTable 1 } LpIlsFwdrLtFrmCpyRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFrmCpyRowStatus RowStatus, lpIlsFwdrLtFrmCpyComponentName DisplayString, lpIlsFwdrLtFrmCpyStorageType StorageType, lpIlsFwdrLtFrmCpyIndex NonReplicated } lpIlsFwdrLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFrmCpy components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFrmCpyRowStatusEntry 1 } lpIlsFwdrLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFrmCpyRowStatusEntry 2 } lpIlsFwdrLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFrmCpy tables." ::= { lpIlsFwdrLtFrmCpyRowStatusEntry 4 } lpIlsFwdrLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFrmCpy tables." ::= { lpIlsFwdrLtFrmCpyRowStatusEntry 10 } lpIlsFwdrLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFrmCpy 10 } lpIlsFwdrLtFrmCpyTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFrmCpyTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFrmCpyIndex } ::= { lpIlsFwdrLtFrmCpyTopTable 1 } LpIlsFwdrLtFrmCpyTopEntry ::= SEQUENCE { lpIlsFwdrLtFrmCpyTData AsciiString } lpIlsFwdrLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. lpIlsFwdrLtPrtCfg OBJECT IDENTIFIER ::= { lpIlsFwdrLt 4 } lpIlsFwdrLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtPrtCfg components." ::= { lpIlsFwdrLtPrtCfg 1 } lpIlsFwdrLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtPrtCfg component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtPrtCfgIndex } ::= { lpIlsFwdrLtPrtCfgRowStatusTable 1 } LpIlsFwdrLtPrtCfgRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtPrtCfgRowStatus RowStatus, lpIlsFwdrLtPrtCfgComponentName DisplayString, lpIlsFwdrLtPrtCfgStorageType StorageType, lpIlsFwdrLtPrtCfgIndex NonReplicated } lpIlsFwdrLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtPrtCfg components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtPrtCfgRowStatusEntry 1 } lpIlsFwdrLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtPrtCfgRowStatusEntry 2 } lpIlsFwdrLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtPrtCfg tables." ::= { lpIlsFwdrLtPrtCfgRowStatusEntry 4 } lpIlsFwdrLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtPrtCfg tables." ::= { lpIlsFwdrLtPrtCfgRowStatusEntry 10 } lpIlsFwdrLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtPrtCfg 10 } lpIlsFwdrLtPrtCfgTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtPrtCfgTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtPrtCfgIndex } ::= { lpIlsFwdrLtPrtCfgTopTable 1 } LpIlsFwdrLtPrtCfgTopEntry ::= SEQUENCE { lpIlsFwdrLtPrtCfgTData AsciiString } lpIlsFwdrLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. lpIlsFwdrLtFb OBJECT IDENTIFIER ::= { lpIlsFwdrLt 5 } lpIlsFwdrLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFb components." ::= { lpIlsFwdrLtFb 1 } lpIlsFwdrLtFbRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFb component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex } ::= { lpIlsFwdrLtFbRowStatusTable 1 } LpIlsFwdrLtFbRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbRowStatus RowStatus, lpIlsFwdrLtFbComponentName DisplayString, lpIlsFwdrLtFbStorageType StorageType, lpIlsFwdrLtFbIndex NonReplicated } lpIlsFwdrLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFb components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbRowStatusEntry 1 } lpIlsFwdrLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbRowStatusEntry 2 } lpIlsFwdrLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFb tables." ::= { lpIlsFwdrLtFbRowStatusEntry 4 } lpIlsFwdrLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFb tables." ::= { lpIlsFwdrLtFbRowStatusEntry 10 } lpIlsFwdrLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFb 20 } lpIlsFwdrLtFbTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex } ::= { lpIlsFwdrLtFbTopTable 1 } LpIlsFwdrLtFbTopEntry ::= SEQUENCE { lpIlsFwdrLtFbTData AsciiString } lpIlsFwdrLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. lpIlsFwdrLtFbTxInfo OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 2 } lpIlsFwdrLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbTxInfo components." ::= { lpIlsFwdrLtFbTxInfo 1 } lpIlsFwdrLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbTxInfo component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbTxInfoIndex } ::= { lpIlsFwdrLtFbTxInfoRowStatusTable 1 } LpIlsFwdrLtFbTxInfoRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbTxInfoRowStatus RowStatus, lpIlsFwdrLtFbTxInfoComponentName DisplayString, lpIlsFwdrLtFbTxInfoStorageType StorageType, lpIlsFwdrLtFbTxInfoIndex NonReplicated } lpIlsFwdrLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbTxInfo components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbTxInfoRowStatusEntry 1 } lpIlsFwdrLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbTxInfoRowStatusEntry 2 } lpIlsFwdrLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbTxInfo tables." ::= { lpIlsFwdrLtFbTxInfoRowStatusEntry 4 } lpIlsFwdrLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbTxInfo tables." ::= { lpIlsFwdrLtFbTxInfoRowStatusEntry 10 } lpIlsFwdrLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbTxInfo 10 } lpIlsFwdrLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbTxInfoTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbTxInfoIndex } ::= { lpIlsFwdrLtFbTxInfoTopTable 1 } LpIlsFwdrLtFbTxInfoTopEntry ::= SEQUENCE { lpIlsFwdrLtFbTxInfoTData AsciiString } lpIlsFwdrLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. lpIlsFwdrLtFbFddiMac OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 3 } lpIlsFwdrLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbFddiMac components." ::= { lpIlsFwdrLtFbFddiMac 1 } lpIlsFwdrLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbFddiMac component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbFddiMacIndex } ::= { lpIlsFwdrLtFbFddiMacRowStatusTable 1 } LpIlsFwdrLtFbFddiMacRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbFddiMacRowStatus RowStatus, lpIlsFwdrLtFbFddiMacComponentName DisplayString, lpIlsFwdrLtFbFddiMacStorageType StorageType, lpIlsFwdrLtFbFddiMacIndex NonReplicated } lpIlsFwdrLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbFddiMac components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbFddiMacRowStatusEntry 1 } lpIlsFwdrLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbFddiMacRowStatusEntry 2 } lpIlsFwdrLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbFddiMac tables." ::= { lpIlsFwdrLtFbFddiMacRowStatusEntry 4 } lpIlsFwdrLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbFddiMac tables." ::= { lpIlsFwdrLtFbFddiMacRowStatusEntry 10 } lpIlsFwdrLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbFddiMac 10 } lpIlsFwdrLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbFddiMacTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbFddiMacIndex } ::= { lpIlsFwdrLtFbFddiMacTopTable 1 } LpIlsFwdrLtFbFddiMacTopEntry ::= SEQUENCE { lpIlsFwdrLtFbFddiMacTData AsciiString } lpIlsFwdrLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. lpIlsFwdrLtFbMacEnet OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 4 } lpIlsFwdrLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbMacEnet components." ::= { lpIlsFwdrLtFbMacEnet 1 } lpIlsFwdrLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbMacEnet component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbMacEnetIndex } ::= { lpIlsFwdrLtFbMacEnetRowStatusTable 1 } LpIlsFwdrLtFbMacEnetRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbMacEnetRowStatus RowStatus, lpIlsFwdrLtFbMacEnetComponentName DisplayString, lpIlsFwdrLtFbMacEnetStorageType StorageType, lpIlsFwdrLtFbMacEnetIndex NonReplicated } lpIlsFwdrLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbMacEnet components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbMacEnetRowStatusEntry 1 } lpIlsFwdrLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbMacEnetRowStatusEntry 2 } lpIlsFwdrLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbMacEnet tables." ::= { lpIlsFwdrLtFbMacEnetRowStatusEntry 4 } lpIlsFwdrLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbMacEnet tables." ::= { lpIlsFwdrLtFbMacEnetRowStatusEntry 10 } lpIlsFwdrLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbMacEnet 10 } lpIlsFwdrLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbMacEnetTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbMacEnetIndex } ::= { lpIlsFwdrLtFbMacEnetTopTable 1 } LpIlsFwdrLtFbMacEnetTopEntry ::= SEQUENCE { lpIlsFwdrLtFbMacEnetTData AsciiString } lpIlsFwdrLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. lpIlsFwdrLtFbMacTr OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 5 } lpIlsFwdrLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbMacTr components." ::= { lpIlsFwdrLtFbMacTr 1 } lpIlsFwdrLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbMacTr component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbMacTrIndex } ::= { lpIlsFwdrLtFbMacTrRowStatusTable 1 } LpIlsFwdrLtFbMacTrRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbMacTrRowStatus RowStatus, lpIlsFwdrLtFbMacTrComponentName DisplayString, lpIlsFwdrLtFbMacTrStorageType StorageType, lpIlsFwdrLtFbMacTrIndex NonReplicated } lpIlsFwdrLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbMacTr components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbMacTrRowStatusEntry 1 } lpIlsFwdrLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbMacTrRowStatusEntry 2 } lpIlsFwdrLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbMacTr tables." ::= { lpIlsFwdrLtFbMacTrRowStatusEntry 4 } lpIlsFwdrLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbMacTr tables." ::= { lpIlsFwdrLtFbMacTrRowStatusEntry 10 } lpIlsFwdrLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbMacTr 10 } lpIlsFwdrLtFbMacTrTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbMacTrTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbMacTrIndex } ::= { lpIlsFwdrLtFbMacTrTopTable 1 } LpIlsFwdrLtFbMacTrTopEntry ::= SEQUENCE { lpIlsFwdrLtFbMacTrTData AsciiString } lpIlsFwdrLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. lpIlsFwdrLtFbData OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 6 } lpIlsFwdrLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbData components." ::= { lpIlsFwdrLtFbData 1 } lpIlsFwdrLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbData component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbDataIndex } ::= { lpIlsFwdrLtFbDataRowStatusTable 1 } LpIlsFwdrLtFbDataRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbDataRowStatus RowStatus, lpIlsFwdrLtFbDataComponentName DisplayString, lpIlsFwdrLtFbDataStorageType StorageType, lpIlsFwdrLtFbDataIndex NonReplicated } lpIlsFwdrLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbData components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbDataRowStatusEntry 1 } lpIlsFwdrLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbDataRowStatusEntry 2 } lpIlsFwdrLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbData tables." ::= { lpIlsFwdrLtFbDataRowStatusEntry 4 } lpIlsFwdrLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbData tables." ::= { lpIlsFwdrLtFbDataRowStatusEntry 10 } lpIlsFwdrLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbData 10 } lpIlsFwdrLtFbDataTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbDataTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbDataIndex } ::= { lpIlsFwdrLtFbDataTopTable 1 } LpIlsFwdrLtFbDataTopEntry ::= SEQUENCE { lpIlsFwdrLtFbDataTData AsciiString } lpIlsFwdrLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. lpIlsFwdrLtFbIpH OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 7 } lpIlsFwdrLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbIpH components." ::= { lpIlsFwdrLtFbIpH 1 } lpIlsFwdrLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbIpH component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbIpHIndex } ::= { lpIlsFwdrLtFbIpHRowStatusTable 1 } LpIlsFwdrLtFbIpHRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbIpHRowStatus RowStatus, lpIlsFwdrLtFbIpHComponentName DisplayString, lpIlsFwdrLtFbIpHStorageType StorageType, lpIlsFwdrLtFbIpHIndex NonReplicated } lpIlsFwdrLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbIpH components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbIpHRowStatusEntry 1 } lpIlsFwdrLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbIpHRowStatusEntry 2 } lpIlsFwdrLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbIpH tables." ::= { lpIlsFwdrLtFbIpHRowStatusEntry 4 } lpIlsFwdrLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbIpH tables." ::= { lpIlsFwdrLtFbIpHRowStatusEntry 10 } lpIlsFwdrLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbIpH 10 } lpIlsFwdrLtFbIpHTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbIpHTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbIpHIndex } ::= { lpIlsFwdrLtFbIpHTopTable 1 } LpIlsFwdrLtFbIpHTopEntry ::= SEQUENCE { lpIlsFwdrLtFbIpHTData AsciiString } lpIlsFwdrLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. lpIlsFwdrLtFbLlch OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 8 } lpIlsFwdrLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbLlch components." ::= { lpIlsFwdrLtFbLlch 1 } lpIlsFwdrLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbLlch component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbLlchIndex } ::= { lpIlsFwdrLtFbLlchRowStatusTable 1 } LpIlsFwdrLtFbLlchRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbLlchRowStatus RowStatus, lpIlsFwdrLtFbLlchComponentName DisplayString, lpIlsFwdrLtFbLlchStorageType StorageType, lpIlsFwdrLtFbLlchIndex NonReplicated } lpIlsFwdrLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbLlch components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbLlchRowStatusEntry 1 } lpIlsFwdrLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbLlchRowStatusEntry 2 } lpIlsFwdrLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbLlch tables." ::= { lpIlsFwdrLtFbLlchRowStatusEntry 4 } lpIlsFwdrLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbLlch tables." ::= { lpIlsFwdrLtFbLlchRowStatusEntry 10 } lpIlsFwdrLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbLlch 10 } lpIlsFwdrLtFbLlchTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbLlchTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbLlchIndex } ::= { lpIlsFwdrLtFbLlchTopTable 1 } LpIlsFwdrLtFbLlchTopEntry ::= SEQUENCE { lpIlsFwdrLtFbLlchTData AsciiString } lpIlsFwdrLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. lpIlsFwdrLtFbAppleH OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 9 } lpIlsFwdrLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbAppleH components." ::= { lpIlsFwdrLtFbAppleH 1 } lpIlsFwdrLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbAppleH component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbAppleHIndex } ::= { lpIlsFwdrLtFbAppleHRowStatusTable 1 } LpIlsFwdrLtFbAppleHRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbAppleHRowStatus RowStatus, lpIlsFwdrLtFbAppleHComponentName DisplayString, lpIlsFwdrLtFbAppleHStorageType StorageType, lpIlsFwdrLtFbAppleHIndex NonReplicated } lpIlsFwdrLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbAppleH components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbAppleHRowStatusEntry 1 } lpIlsFwdrLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbAppleHRowStatusEntry 2 } lpIlsFwdrLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbAppleH tables." ::= { lpIlsFwdrLtFbAppleHRowStatusEntry 4 } lpIlsFwdrLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbAppleH tables." ::= { lpIlsFwdrLtFbAppleHRowStatusEntry 10 } lpIlsFwdrLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbAppleH 10 } lpIlsFwdrLtFbAppleHTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbAppleHTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbAppleHIndex } ::= { lpIlsFwdrLtFbAppleHTopTable 1 } LpIlsFwdrLtFbAppleHTopEntry ::= SEQUENCE { lpIlsFwdrLtFbAppleHTData AsciiString } lpIlsFwdrLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. lpIlsFwdrLtFbIpxH OBJECT IDENTIFIER ::= { lpIlsFwdrLtFb 10 } lpIlsFwdrLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtFbIpxH components." ::= { lpIlsFwdrLtFbIpxH 1 } lpIlsFwdrLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtFbIpxH component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbIpxHIndex } ::= { lpIlsFwdrLtFbIpxHRowStatusTable 1 } LpIlsFwdrLtFbIpxHRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtFbIpxHRowStatus RowStatus, lpIlsFwdrLtFbIpxHComponentName DisplayString, lpIlsFwdrLtFbIpxHStorageType StorageType, lpIlsFwdrLtFbIpxHIndex NonReplicated } lpIlsFwdrLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbIpxH components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtFbIpxHRowStatusEntry 1 } lpIlsFwdrLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtFbIpxHRowStatusEntry 2 } lpIlsFwdrLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtFbIpxH tables." ::= { lpIlsFwdrLtFbIpxHRowStatusEntry 4 } lpIlsFwdrLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtFbIpxH tables." ::= { lpIlsFwdrLtFbIpxHRowStatusEntry 10 } lpIlsFwdrLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtFbIpxH 10 } lpIlsFwdrLtFbIpxHTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtFbIpxHTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtFbIndex, lpIlsFwdrLtFbIpxHIndex } ::= { lpIlsFwdrLtFbIpxHTopTable 1 } LpIlsFwdrLtFbIpxHTopEntry ::= SEQUENCE { lpIlsFwdrLtFbIpxHTData AsciiString } lpIlsFwdrLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. lpIlsFwdrLtCntl OBJECT IDENTIFIER ::= { lpIlsFwdrLt 6 } lpIlsFwdrLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrLtCntl components." ::= { lpIlsFwdrLtCntl 1 } lpIlsFwdrLtCntlRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrLtCntl component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtCntlIndex } ::= { lpIlsFwdrLtCntlRowStatusTable 1 } LpIlsFwdrLtCntlRowStatusEntry ::= SEQUENCE { lpIlsFwdrLtCntlRowStatus RowStatus, lpIlsFwdrLtCntlComponentName DisplayString, lpIlsFwdrLtCntlStorageType StorageType, lpIlsFwdrLtCntlIndex NonReplicated } lpIlsFwdrLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrLtCntl components. These components cannot be added nor deleted." ::= { lpIlsFwdrLtCntlRowStatusEntry 1 } lpIlsFwdrLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrLtCntlRowStatusEntry 2 } lpIlsFwdrLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrLtCntl tables." ::= { lpIlsFwdrLtCntlRowStatusEntry 4 } lpIlsFwdrLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrLtCntl tables." ::= { lpIlsFwdrLtCntlRowStatusEntry 10 } lpIlsFwdrLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpIlsFwdrLtCntl 10 } lpIlsFwdrLtCntlTopEntry OBJECT-TYPE SYNTAX LpIlsFwdrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrLtCntlTopTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrLtIndex, lpIlsFwdrLtCntlIndex } ::= { lpIlsFwdrLtCntlTopTable 1 } LpIlsFwdrLtCntlTopEntry ::= SEQUENCE { lpIlsFwdrLtCntlTData AsciiString } lpIlsFwdrLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpIlsFwdrLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. lpIlsFwdrTest OBJECT IDENTIFIER ::= { lpIlsFwdr 5 } lpIlsFwdrTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpIlsFwdrTest components." ::= { lpIlsFwdrTest 1 } lpIlsFwdrTestRowStatusEntry OBJECT-TYPE SYNTAX LpIlsFwdrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpIlsFwdrTest component." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrTestIndex } ::= { lpIlsFwdrTestRowStatusTable 1 } LpIlsFwdrTestRowStatusEntry ::= SEQUENCE { lpIlsFwdrTestRowStatus RowStatus, lpIlsFwdrTestComponentName DisplayString, lpIlsFwdrTestStorageType StorageType, lpIlsFwdrTestIndex NonReplicated } lpIlsFwdrTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpIlsFwdrTest components. These components cannot be added nor deleted." ::= { lpIlsFwdrTestRowStatusEntry 1 } lpIlsFwdrTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpIlsFwdrTestRowStatusEntry 2 } lpIlsFwdrTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpIlsFwdrTest tables." ::= { lpIlsFwdrTestRowStatusEntry 4 } lpIlsFwdrTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpIlsFwdrTest tables." ::= { lpIlsFwdrTestRowStatusEntry 10 } lpIlsFwdrTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { lpIlsFwdrTest 10 } lpIlsFwdrTestPTOEntry OBJECT-TYPE SYNTAX LpIlsFwdrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrTestPTOTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrTestIndex } ::= { lpIlsFwdrTestPTOTable 1 } LpIlsFwdrTestPTOEntry ::= SEQUENCE { lpIlsFwdrTestType INTEGER, lpIlsFwdrTestFrmSize Unsigned32, lpIlsFwdrTestDuration Unsigned32 } lpIlsFwdrTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { lpIlsFwdrTestPTOEntry 1 } lpIlsFwdrTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { lpIlsFwdrTestPTOEntry 2 } lpIlsFwdrTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { lpIlsFwdrTestPTOEntry 3 } lpIlsFwdrTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpIlsFwdrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { lpIlsFwdrTest 11 } lpIlsFwdrTestResultsEntry OBJECT-TYPE SYNTAX LpIlsFwdrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpIlsFwdrTestResultsTable." INDEX { lpIndex, lpIlsFwdrIndex, lpIlsFwdrTestIndex } ::= { lpIlsFwdrTestResultsTable 1 } LpIlsFwdrTestResultsEntry ::= SEQUENCE { lpIlsFwdrTestElapsedTime Counter32, lpIlsFwdrTestTimeRemaining Unsigned32, lpIlsFwdrTestCauseOfTermination INTEGER, lpIlsFwdrTestFrmTx PassportCounter64, lpIlsFwdrTestBitsTx PassportCounter64, lpIlsFwdrTestFrmRx PassportCounter64, lpIlsFwdrTestBitsRx PassportCounter64, lpIlsFwdrTestErroredFrmRx PassportCounter64 } lpIlsFwdrTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { lpIlsFwdrTestResultsEntry 4 } lpIlsFwdrTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { lpIlsFwdrTestResultsEntry 5 } lpIlsFwdrTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { lpIlsFwdrTestResultsEntry 6 } lpIlsFwdrTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { lpIlsFwdrTestResultsEntry 7 } lpIlsFwdrTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { lpIlsFwdrTestResultsEntry 8 } lpIlsFwdrTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpIlsFwdrTestResultsEntry 9 } lpIlsFwdrTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpIlsFwdrTestResultsEntry 10 } lpIlsFwdrTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpIlsFwdrTestResultsEntry 11 } -- Lp/n Ethernet100BaseT/n -- This component defines an instance of a 100BaseT Ethernet station -- attached to a bus. One instance of this component must be created for -- each hardware interface. lpEth100 OBJECT IDENTIFIER ::= { lp 25 } lpEth100RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100 components." ::= { lpEth100 1 } lpEth100RowStatusEntry OBJECT-TYPE SYNTAX LpEth100RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100 component." INDEX { lpIndex, lpEth100Index } ::= { lpEth100RowStatusTable 1 } LpEth100RowStatusEntry ::= SEQUENCE { lpEth100RowStatus RowStatus, lpEth100ComponentName DisplayString, lpEth100StorageType StorageType, lpEth100Index Integer32 } lpEth100RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100 components. These components can be added and deleted." ::= { lpEth100RowStatusEntry 1 } lpEth100ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100RowStatusEntry 2 } lpEth100StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100 tables." ::= { lpEth100RowStatusEntry 4 } lpEth100Index OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100 tables." ::= { lpEth100RowStatusEntry 10 } lpEth100CidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100CidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { lpEth100 10 } lpEth100CidDataEntry OBJECT-TYPE SYNTAX LpEth100CidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100CidDataTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100CidDataTable 1 } LpEth100CidDataEntry ::= SEQUENCE { lpEth100CustomerIdentifier Unsigned32 } lpEth100CustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { lpEth100CidDataEntry 1 } lpEth100IfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100IfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { lpEth100 11 } lpEth100IfEntryEntry OBJECT-TYPE SYNTAX LpEth100IfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100IfEntryTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100IfEntryTable 1 } LpEth100IfEntryEntry ::= SEQUENCE { lpEth100IfAdminStatus INTEGER, lpEth100IfIndex InterfaceIndex } lpEth100IfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpEth100IfEntryEntry 1 } lpEth100IfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { lpEth100IfEntryEntry 2 } lpEth100ProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100ProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Eth100BaseT component." ::= { lpEth100 12 } lpEth100ProvEntry OBJECT-TYPE SYNTAX LpEth100ProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100ProvTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100ProvTable 1 } LpEth100ProvEntry ::= SEQUENCE { lpEth100DuplexMode INTEGER, lpEth100LineSpeed Unsigned32, lpEth100AutoNegotiation INTEGER, lpEth100ApplicationFramerName Link } lpEth100DuplexMode OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the duplex mode of the port. This attribute is ignored if auto negotiation is successful." DEFVAL { half } ::= { lpEth100ProvEntry 1 } lpEth100LineSpeed OBJECT-TYPE SYNTAX Unsigned32 (10 | 100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the operating speed for the Ethernet 100BaseT port. This attribute is ignored if auto negotiation is successful." DEFVAL { 100 } ::= { lpEth100ProvEntry 2 } lpEth100AutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to select whether or not the port does auto negotiation. The provisionable values of duplexMode and lineSpeed are ignored if auto negotiation is successful. Refer to the operational attribute autoNegStatus for auto negotiation results." DEFVAL { enabled } ::= { lpEth100ProvEntry 3 } lpEth100ApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Eth100BaseT component. This defines which Lan Application will be using this Eth100BaseT interface." ::= { lpEth100ProvEntry 4 } lpEth100AdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100AdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { lpEth100 13 } lpEth100AdminInfoEntry OBJECT-TYPE SYNTAX LpEth100AdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100AdminInfoTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100AdminInfoTable 1 } LpEth100AdminInfoEntry ::= SEQUENCE { lpEth100Vendor AsciiString, lpEth100CommentText AsciiString } lpEth100Vendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { lpEth100AdminInfoEntry 1 } lpEth100CommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { lpEth100AdminInfoEntry 2 } lpEth100StateTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100StateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { lpEth100 15 } lpEth100StateEntry OBJECT-TYPE SYNTAX LpEth100StateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100StateTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100StateTable 1 } LpEth100StateEntry ::= SEQUENCE { lpEth100AdminState INTEGER, lpEth100OperationalState INTEGER, lpEth100UsageState INTEGER } lpEth100AdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { lpEth100StateEntry 1 } lpEth100OperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { lpEth100StateEntry 2 } lpEth100UsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { lpEth100StateEntry 3 } lpEth100OperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100OperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { lpEth100 16 } lpEth100OperStatusEntry OBJECT-TYPE SYNTAX LpEth100OperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100OperStatusTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100OperStatusTable 1 } LpEth100OperStatusEntry ::= SEQUENCE { lpEth100SnmpOperStatus INTEGER } lpEth100SnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { lpEth100OperStatusEntry 1 } lpEth100OperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100OperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Port operational attributes of the Eth100BaseT component." ::= { lpEth100 17 } lpEth100OperEntry OBJECT-TYPE SYNTAX LpEth100OperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100OperTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100OperTable 1 } LpEth100OperEntry ::= SEQUENCE { lpEth100MacAddress MacAddress, lpEth100AutoNegStatus INTEGER, lpEth100ActualLineSpeed Unsigned32, lpEth100ActualDuplexMode INTEGER } lpEth100MacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the medium access controller (MAC) address. The MAC address is displayed in canonical format." ::= { lpEth100OperEntry 1 } lpEth100AutoNegStatus OBJECT-TYPE SYNTAX INTEGER { succeeded(1), failed(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the status of the auto negotiation at the Phy level." ::= { lpEth100OperEntry 4 } lpEth100ActualLineSpeed OBJECT-TYPE SYNTAX Unsigned32 (10 | 100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the line speed of the Eth100BaseT port." ::= { lpEth100OperEntry 5 } lpEth100ActualDuplexMode OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the hardware is in half duplex or full duplex mode." ::= { lpEth100OperEntry 6 } lpEth100Eth100StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100Eth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistical attributes for the Eth100BaseT component." ::= { lpEth100 18 } lpEth100Eth100StatsEntry OBJECT-TYPE SYNTAX LpEth100Eth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100Eth100StatsTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100Eth100StatsTable 1 } LpEth100Eth100StatsEntry ::= SEQUENCE { lpEth100FramesTransmittedOk Counter32, lpEth100FramesReceivedOk Counter32, lpEth100OctetsTransmittedOk Counter32, lpEth100OctetsReceivedOk Counter32, lpEth100UndersizeFrames Counter32, lpEth100ReceivedOctetsIntoRouterBr Counter32, lpEth100ReceivedFramesIntoRouterBr Counter32 } lpEth100FramesTransmittedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were transmitted without errors. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 1 } lpEth100FramesReceivedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were received without errors. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 2 } lpEth100OctetsTransmittedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets which were transmitted without errors. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 3 } lpEth100OctetsReceivedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets which were received without errors. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 4 } lpEth100UndersizeFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames that were received but were less than the minimum size (64 bytes). This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 5 } lpEth100ReceivedOctetsIntoRouterBr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets that were not hardware switched but were passed the Router or Bridge software. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 6 } lpEth100ReceivedFramesIntoRouterBr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were not hardware switched but were passed to the Router or Bridge software. This counter wraps to zero after it reaches its maximum value." ::= { lpEth100Eth100StatsEntry 7 } lpEth100StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical attributes for the Ethernet component." ::= { lpEth100 19 } lpEth100StatsEntry OBJECT-TYPE SYNTAX LpEth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100StatsTable." INDEX { lpIndex, lpEth100Index } ::= { lpEth100StatsTable 1 } LpEth100StatsEntry ::= SEQUENCE { lpEth100AlignmentErrors Counter32, lpEth100FcsErrors Counter32, lpEth100SingleCollisionFrames Counter32, lpEth100MultipleCollisionFrames Counter32, lpEth100SqeTestErrors Counter32, lpEth100DeferredTransmissions Counter32, lpEth100LateCollisions Counter32, lpEth100ExcessiveCollisions Counter32, lpEth100MacTransmitErrors Counter32, lpEth100CarrierSenseErrors Counter32, lpEth100FrameTooLongs Counter32, lpEth100MacReceiveErrors Counter32 } lpEth100AlignmentErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 2 } lpEth100FcsErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 3 } lpEth100SingleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 4 } lpEth100MultipleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 5 } lpEth100SqeTestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 6 } lpEth100DeferredTransmissions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 7 } lpEth100LateCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 8 } lpEth100ExcessiveCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 9 } lpEth100MacTransmitErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 10 } lpEth100CarrierSenseErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 11 } lpEth100FrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 12 } lpEth100MacReceiveErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter will wrap around after it reaches its maximum value." ::= { lpEth100StatsEntry 13 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. lpEth100Lt OBJECT IDENTIFIER ::= { lpEth100 2 } lpEth100LtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100Lt components." ::= { lpEth100Lt 1 } lpEth100LtRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100Lt component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex } ::= { lpEth100LtRowStatusTable 1 } LpEth100LtRowStatusEntry ::= SEQUENCE { lpEth100LtRowStatus RowStatus, lpEth100LtComponentName DisplayString, lpEth100LtStorageType StorageType, lpEth100LtIndex NonReplicated } lpEth100LtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100Lt components. These components cannot be added nor deleted." ::= { lpEth100LtRowStatusEntry 1 } lpEth100LtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtRowStatusEntry 2 } lpEth100LtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100Lt tables." ::= { lpEth100LtRowStatusEntry 4 } lpEth100LtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100Lt tables." ::= { lpEth100LtRowStatusEntry 10 } lpEth100LtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100Lt 20 } lpEth100LtTopEntry OBJECT-TYPE SYNTAX LpEth100LtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex } ::= { lpEth100LtTopTable 1 } LpEth100LtTopEntry ::= SEQUENCE { lpEth100LtTData AsciiString } lpEth100LtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. lpEth100LtFrmCmp OBJECT IDENTIFIER ::= { lpEth100Lt 2 } lpEth100LtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFrmCmp components." ::= { lpEth100LtFrmCmp 1 } lpEth100LtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFrmCmp component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFrmCmpIndex } ::= { lpEth100LtFrmCmpRowStatusTable 1 } LpEth100LtFrmCmpRowStatusEntry ::= SEQUENCE { lpEth100LtFrmCmpRowStatus RowStatus, lpEth100LtFrmCmpComponentName DisplayString, lpEth100LtFrmCmpStorageType StorageType, lpEth100LtFrmCmpIndex NonReplicated } lpEth100LtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFrmCmp components. These components cannot be added nor deleted." ::= { lpEth100LtFrmCmpRowStatusEntry 1 } lpEth100LtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFrmCmpRowStatusEntry 2 } lpEth100LtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFrmCmp tables." ::= { lpEth100LtFrmCmpRowStatusEntry 4 } lpEth100LtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFrmCmp tables." ::= { lpEth100LtFrmCmpRowStatusEntry 10 } lpEth100LtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFrmCmp 10 } lpEth100LtFrmCmpTopEntry OBJECT-TYPE SYNTAX LpEth100LtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFrmCmpTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFrmCmpIndex } ::= { lpEth100LtFrmCmpTopTable 1 } LpEth100LtFrmCmpTopEntry ::= SEQUENCE { lpEth100LtFrmCmpTData AsciiString } lpEth100LtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. lpEth100LtFrmCpy OBJECT IDENTIFIER ::= { lpEth100Lt 3 } lpEth100LtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFrmCpy components." ::= { lpEth100LtFrmCpy 1 } lpEth100LtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFrmCpy component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFrmCpyIndex } ::= { lpEth100LtFrmCpyRowStatusTable 1 } LpEth100LtFrmCpyRowStatusEntry ::= SEQUENCE { lpEth100LtFrmCpyRowStatus RowStatus, lpEth100LtFrmCpyComponentName DisplayString, lpEth100LtFrmCpyStorageType StorageType, lpEth100LtFrmCpyIndex NonReplicated } lpEth100LtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFrmCpy components. These components cannot be added nor deleted." ::= { lpEth100LtFrmCpyRowStatusEntry 1 } lpEth100LtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFrmCpyRowStatusEntry 2 } lpEth100LtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFrmCpy tables." ::= { lpEth100LtFrmCpyRowStatusEntry 4 } lpEth100LtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFrmCpy tables." ::= { lpEth100LtFrmCpyRowStatusEntry 10 } lpEth100LtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFrmCpy 10 } lpEth100LtFrmCpyTopEntry OBJECT-TYPE SYNTAX LpEth100LtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFrmCpyTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFrmCpyIndex } ::= { lpEth100LtFrmCpyTopTable 1 } LpEth100LtFrmCpyTopEntry ::= SEQUENCE { lpEth100LtFrmCpyTData AsciiString } lpEth100LtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. lpEth100LtPrtCfg OBJECT IDENTIFIER ::= { lpEth100Lt 4 } lpEth100LtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtPrtCfg components." ::= { lpEth100LtPrtCfg 1 } lpEth100LtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtPrtCfg component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtPrtCfgIndex } ::= { lpEth100LtPrtCfgRowStatusTable 1 } LpEth100LtPrtCfgRowStatusEntry ::= SEQUENCE { lpEth100LtPrtCfgRowStatus RowStatus, lpEth100LtPrtCfgComponentName DisplayString, lpEth100LtPrtCfgStorageType StorageType, lpEth100LtPrtCfgIndex NonReplicated } lpEth100LtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtPrtCfg components. These components cannot be added nor deleted." ::= { lpEth100LtPrtCfgRowStatusEntry 1 } lpEth100LtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtPrtCfgRowStatusEntry 2 } lpEth100LtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtPrtCfg tables." ::= { lpEth100LtPrtCfgRowStatusEntry 4 } lpEth100LtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtPrtCfg tables." ::= { lpEth100LtPrtCfgRowStatusEntry 10 } lpEth100LtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtPrtCfg 10 } lpEth100LtPrtCfgTopEntry OBJECT-TYPE SYNTAX LpEth100LtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtPrtCfgTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtPrtCfgIndex } ::= { lpEth100LtPrtCfgTopTable 1 } LpEth100LtPrtCfgTopEntry ::= SEQUENCE { lpEth100LtPrtCfgTData AsciiString } lpEth100LtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. lpEth100LtFb OBJECT IDENTIFIER ::= { lpEth100Lt 5 } lpEth100LtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFb components." ::= { lpEth100LtFb 1 } lpEth100LtFbRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFb component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex } ::= { lpEth100LtFbRowStatusTable 1 } LpEth100LtFbRowStatusEntry ::= SEQUENCE { lpEth100LtFbRowStatus RowStatus, lpEth100LtFbComponentName DisplayString, lpEth100LtFbStorageType StorageType, lpEth100LtFbIndex NonReplicated } lpEth100LtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFb components. These components cannot be added nor deleted." ::= { lpEth100LtFbRowStatusEntry 1 } lpEth100LtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbRowStatusEntry 2 } lpEth100LtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFb tables." ::= { lpEth100LtFbRowStatusEntry 4 } lpEth100LtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFb tables." ::= { lpEth100LtFbRowStatusEntry 10 } lpEth100LtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFb 20 } lpEth100LtFbTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex } ::= { lpEth100LtFbTopTable 1 } LpEth100LtFbTopEntry ::= SEQUENCE { lpEth100LtFbTData AsciiString } lpEth100LtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. lpEth100LtFbTxInfo OBJECT IDENTIFIER ::= { lpEth100LtFb 2 } lpEth100LtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbTxInfo components." ::= { lpEth100LtFbTxInfo 1 } lpEth100LtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbTxInfo component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbTxInfoIndex } ::= { lpEth100LtFbTxInfoRowStatusTable 1 } LpEth100LtFbTxInfoRowStatusEntry ::= SEQUENCE { lpEth100LtFbTxInfoRowStatus RowStatus, lpEth100LtFbTxInfoComponentName DisplayString, lpEth100LtFbTxInfoStorageType StorageType, lpEth100LtFbTxInfoIndex NonReplicated } lpEth100LtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbTxInfo components. These components cannot be added nor deleted." ::= { lpEth100LtFbTxInfoRowStatusEntry 1 } lpEth100LtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbTxInfoRowStatusEntry 2 } lpEth100LtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbTxInfo tables." ::= { lpEth100LtFbTxInfoRowStatusEntry 4 } lpEth100LtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbTxInfo tables." ::= { lpEth100LtFbTxInfoRowStatusEntry 10 } lpEth100LtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbTxInfo 10 } lpEth100LtFbTxInfoTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbTxInfoTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbTxInfoIndex } ::= { lpEth100LtFbTxInfoTopTable 1 } LpEth100LtFbTxInfoTopEntry ::= SEQUENCE { lpEth100LtFbTxInfoTData AsciiString } lpEth100LtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. lpEth100LtFbFddiMac OBJECT IDENTIFIER ::= { lpEth100LtFb 3 } lpEth100LtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbFddiMac components." ::= { lpEth100LtFbFddiMac 1 } lpEth100LtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbFddiMac component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbFddiMacIndex } ::= { lpEth100LtFbFddiMacRowStatusTable 1 } LpEth100LtFbFddiMacRowStatusEntry ::= SEQUENCE { lpEth100LtFbFddiMacRowStatus RowStatus, lpEth100LtFbFddiMacComponentName DisplayString, lpEth100LtFbFddiMacStorageType StorageType, lpEth100LtFbFddiMacIndex NonReplicated } lpEth100LtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbFddiMac components. These components cannot be added nor deleted." ::= { lpEth100LtFbFddiMacRowStatusEntry 1 } lpEth100LtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbFddiMacRowStatusEntry 2 } lpEth100LtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbFddiMac tables." ::= { lpEth100LtFbFddiMacRowStatusEntry 4 } lpEth100LtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbFddiMac tables." ::= { lpEth100LtFbFddiMacRowStatusEntry 10 } lpEth100LtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbFddiMac 10 } lpEth100LtFbFddiMacTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbFddiMacTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbFddiMacIndex } ::= { lpEth100LtFbFddiMacTopTable 1 } LpEth100LtFbFddiMacTopEntry ::= SEQUENCE { lpEth100LtFbFddiMacTData AsciiString } lpEth100LtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. lpEth100LtFbMacEnet OBJECT IDENTIFIER ::= { lpEth100LtFb 4 } lpEth100LtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbMacEnet components." ::= { lpEth100LtFbMacEnet 1 } lpEth100LtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbMacEnet component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbMacEnetIndex } ::= { lpEth100LtFbMacEnetRowStatusTable 1 } LpEth100LtFbMacEnetRowStatusEntry ::= SEQUENCE { lpEth100LtFbMacEnetRowStatus RowStatus, lpEth100LtFbMacEnetComponentName DisplayString, lpEth100LtFbMacEnetStorageType StorageType, lpEth100LtFbMacEnetIndex NonReplicated } lpEth100LtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbMacEnet components. These components cannot be added nor deleted." ::= { lpEth100LtFbMacEnetRowStatusEntry 1 } lpEth100LtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbMacEnetRowStatusEntry 2 } lpEth100LtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbMacEnet tables." ::= { lpEth100LtFbMacEnetRowStatusEntry 4 } lpEth100LtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbMacEnet tables." ::= { lpEth100LtFbMacEnetRowStatusEntry 10 } lpEth100LtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbMacEnet 10 } lpEth100LtFbMacEnetTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbMacEnetTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbMacEnetIndex } ::= { lpEth100LtFbMacEnetTopTable 1 } LpEth100LtFbMacEnetTopEntry ::= SEQUENCE { lpEth100LtFbMacEnetTData AsciiString } lpEth100LtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. lpEth100LtFbMacTr OBJECT IDENTIFIER ::= { lpEth100LtFb 5 } lpEth100LtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbMacTr components." ::= { lpEth100LtFbMacTr 1 } lpEth100LtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbMacTr component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbMacTrIndex } ::= { lpEth100LtFbMacTrRowStatusTable 1 } LpEth100LtFbMacTrRowStatusEntry ::= SEQUENCE { lpEth100LtFbMacTrRowStatus RowStatus, lpEth100LtFbMacTrComponentName DisplayString, lpEth100LtFbMacTrStorageType StorageType, lpEth100LtFbMacTrIndex NonReplicated } lpEth100LtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbMacTr components. These components cannot be added nor deleted." ::= { lpEth100LtFbMacTrRowStatusEntry 1 } lpEth100LtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbMacTrRowStatusEntry 2 } lpEth100LtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbMacTr tables." ::= { lpEth100LtFbMacTrRowStatusEntry 4 } lpEth100LtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbMacTr tables." ::= { lpEth100LtFbMacTrRowStatusEntry 10 } lpEth100LtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbMacTr 10 } lpEth100LtFbMacTrTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbMacTrTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbMacTrIndex } ::= { lpEth100LtFbMacTrTopTable 1 } LpEth100LtFbMacTrTopEntry ::= SEQUENCE { lpEth100LtFbMacTrTData AsciiString } lpEth100LtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbMacTrTopEntry 1 } -- This component adds a data field to frame. lpEth100LtFbData OBJECT IDENTIFIER ::= { lpEth100LtFb 6 } lpEth100LtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbData components." ::= { lpEth100LtFbData 1 } lpEth100LtFbDataRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbData component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbDataIndex } ::= { lpEth100LtFbDataRowStatusTable 1 } LpEth100LtFbDataRowStatusEntry ::= SEQUENCE { lpEth100LtFbDataRowStatus RowStatus, lpEth100LtFbDataComponentName DisplayString, lpEth100LtFbDataStorageType StorageType, lpEth100LtFbDataIndex NonReplicated } lpEth100LtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbData components. These components cannot be added nor deleted." ::= { lpEth100LtFbDataRowStatusEntry 1 } lpEth100LtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbDataRowStatusEntry 2 } lpEth100LtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbData tables." ::= { lpEth100LtFbDataRowStatusEntry 4 } lpEth100LtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbData tables." ::= { lpEth100LtFbDataRowStatusEntry 10 } lpEth100LtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbData 10 } lpEth100LtFbDataTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbDataTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbDataIndex } ::= { lpEth100LtFbDataTopTable 1 } LpEth100LtFbDataTopEntry ::= SEQUENCE { lpEth100LtFbDataTData AsciiString } lpEth100LtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. lpEth100LtFbIpH OBJECT IDENTIFIER ::= { lpEth100LtFb 7 } lpEth100LtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbIpH components." ::= { lpEth100LtFbIpH 1 } lpEth100LtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbIpH component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbIpHIndex } ::= { lpEth100LtFbIpHRowStatusTable 1 } LpEth100LtFbIpHRowStatusEntry ::= SEQUENCE { lpEth100LtFbIpHRowStatus RowStatus, lpEth100LtFbIpHComponentName DisplayString, lpEth100LtFbIpHStorageType StorageType, lpEth100LtFbIpHIndex NonReplicated } lpEth100LtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbIpH components. These components cannot be added nor deleted." ::= { lpEth100LtFbIpHRowStatusEntry 1 } lpEth100LtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbIpHRowStatusEntry 2 } lpEth100LtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbIpH tables." ::= { lpEth100LtFbIpHRowStatusEntry 4 } lpEth100LtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbIpH tables." ::= { lpEth100LtFbIpHRowStatusEntry 10 } lpEth100LtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbIpH 10 } lpEth100LtFbIpHTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbIpHTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbIpHIndex } ::= { lpEth100LtFbIpHTopTable 1 } LpEth100LtFbIpHTopEntry ::= SEQUENCE { lpEth100LtFbIpHTData AsciiString } lpEth100LtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. lpEth100LtFbLlch OBJECT IDENTIFIER ::= { lpEth100LtFb 8 } lpEth100LtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbLlch components." ::= { lpEth100LtFbLlch 1 } lpEth100LtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbLlch component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbLlchIndex } ::= { lpEth100LtFbLlchRowStatusTable 1 } LpEth100LtFbLlchRowStatusEntry ::= SEQUENCE { lpEth100LtFbLlchRowStatus RowStatus, lpEth100LtFbLlchComponentName DisplayString, lpEth100LtFbLlchStorageType StorageType, lpEth100LtFbLlchIndex NonReplicated } lpEth100LtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbLlch components. These components cannot be added nor deleted." ::= { lpEth100LtFbLlchRowStatusEntry 1 } lpEth100LtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbLlchRowStatusEntry 2 } lpEth100LtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbLlch tables." ::= { lpEth100LtFbLlchRowStatusEntry 4 } lpEth100LtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbLlch tables." ::= { lpEth100LtFbLlchRowStatusEntry 10 } lpEth100LtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbLlch 10 } lpEth100LtFbLlchTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbLlchTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbLlchIndex } ::= { lpEth100LtFbLlchTopTable 1 } LpEth100LtFbLlchTopEntry ::= SEQUENCE { lpEth100LtFbLlchTData AsciiString } lpEth100LtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. lpEth100LtFbAppleH OBJECT IDENTIFIER ::= { lpEth100LtFb 9 } lpEth100LtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbAppleH components." ::= { lpEth100LtFbAppleH 1 } lpEth100LtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbAppleH component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbAppleHIndex } ::= { lpEth100LtFbAppleHRowStatusTable 1 } LpEth100LtFbAppleHRowStatusEntry ::= SEQUENCE { lpEth100LtFbAppleHRowStatus RowStatus, lpEth100LtFbAppleHComponentName DisplayString, lpEth100LtFbAppleHStorageType StorageType, lpEth100LtFbAppleHIndex NonReplicated } lpEth100LtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbAppleH components. These components cannot be added nor deleted." ::= { lpEth100LtFbAppleHRowStatusEntry 1 } lpEth100LtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbAppleHRowStatusEntry 2 } lpEth100LtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbAppleH tables." ::= { lpEth100LtFbAppleHRowStatusEntry 4 } lpEth100LtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbAppleH tables." ::= { lpEth100LtFbAppleHRowStatusEntry 10 } lpEth100LtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbAppleH 10 } lpEth100LtFbAppleHTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbAppleHTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbAppleHIndex } ::= { lpEth100LtFbAppleHTopTable 1 } LpEth100LtFbAppleHTopEntry ::= SEQUENCE { lpEth100LtFbAppleHTData AsciiString } lpEth100LtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. lpEth100LtFbIpxH OBJECT IDENTIFIER ::= { lpEth100LtFb 10 } lpEth100LtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtFbIpxH components." ::= { lpEth100LtFbIpxH 1 } lpEth100LtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtFbIpxH component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbIpxHIndex } ::= { lpEth100LtFbIpxHRowStatusTable 1 } LpEth100LtFbIpxHRowStatusEntry ::= SEQUENCE { lpEth100LtFbIpxHRowStatus RowStatus, lpEth100LtFbIpxHComponentName DisplayString, lpEth100LtFbIpxHStorageType StorageType, lpEth100LtFbIpxHIndex NonReplicated } lpEth100LtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtFbIpxH components. These components cannot be added nor deleted." ::= { lpEth100LtFbIpxHRowStatusEntry 1 } lpEth100LtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtFbIpxHRowStatusEntry 2 } lpEth100LtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtFbIpxH tables." ::= { lpEth100LtFbIpxHRowStatusEntry 4 } lpEth100LtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtFbIpxH tables." ::= { lpEth100LtFbIpxHRowStatusEntry 10 } lpEth100LtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtFbIpxH 10 } lpEth100LtFbIpxHTopEntry OBJECT-TYPE SYNTAX LpEth100LtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtFbIpxHTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtFbIndex, lpEth100LtFbIpxHIndex } ::= { lpEth100LtFbIpxHTopTable 1 } LpEth100LtFbIpxHTopEntry ::= SEQUENCE { lpEth100LtFbIpxHTData AsciiString } lpEth100LtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. lpEth100LtCntl OBJECT IDENTIFIER ::= { lpEth100Lt 6 } lpEth100LtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100LtCntl components." ::= { lpEth100LtCntl 1 } lpEth100LtCntlRowStatusEntry OBJECT-TYPE SYNTAX LpEth100LtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100LtCntl component." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtCntlIndex } ::= { lpEth100LtCntlRowStatusTable 1 } LpEth100LtCntlRowStatusEntry ::= SEQUENCE { lpEth100LtCntlRowStatus RowStatus, lpEth100LtCntlComponentName DisplayString, lpEth100LtCntlStorageType StorageType, lpEth100LtCntlIndex NonReplicated } lpEth100LtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100LtCntl components. These components cannot be added nor deleted." ::= { lpEth100LtCntlRowStatusEntry 1 } lpEth100LtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100LtCntlRowStatusEntry 2 } lpEth100LtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100LtCntl tables." ::= { lpEth100LtCntlRowStatusEntry 4 } lpEth100LtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100LtCntl tables." ::= { lpEth100LtCntlRowStatusEntry 10 } lpEth100LtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100LtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { lpEth100LtCntl 10 } lpEth100LtCntlTopEntry OBJECT-TYPE SYNTAX LpEth100LtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100LtCntlTopTable." INDEX { lpIndex, lpEth100Index, lpEth100LtIndex, lpEth100LtCntlIndex } ::= { lpEth100LtCntlTopTable 1 } LpEth100LtCntlTopEntry ::= SEQUENCE { lpEth100LtCntlTData AsciiString } lpEth100LtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { lpEth100LtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. lpEth100Test OBJECT IDENTIFIER ::= { lpEth100 3 } lpEth100TestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100TestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEth100Test components." ::= { lpEth100Test 1 } lpEth100TestRowStatusEntry OBJECT-TYPE SYNTAX LpEth100TestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEth100Test component." INDEX { lpIndex, lpEth100Index, lpEth100TestIndex } ::= { lpEth100TestRowStatusTable 1 } LpEth100TestRowStatusEntry ::= SEQUENCE { lpEth100TestRowStatus RowStatus, lpEth100TestComponentName DisplayString, lpEth100TestStorageType StorageType, lpEth100TestIndex NonReplicated } lpEth100TestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEth100Test components. These components cannot be added nor deleted." ::= { lpEth100TestRowStatusEntry 1 } lpEth100TestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEth100TestRowStatusEntry 2 } lpEth100TestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEth100Test tables." ::= { lpEth100TestRowStatusEntry 4 } lpEth100TestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEth100Test tables." ::= { lpEth100TestRowStatusEntry 10 } lpEth100TestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100TestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { lpEth100Test 10 } lpEth100TestPTOEntry OBJECT-TYPE SYNTAX LpEth100TestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100TestPTOTable." INDEX { lpIndex, lpEth100Index, lpEth100TestIndex } ::= { lpEth100TestPTOTable 1 } LpEth100TestPTOEntry ::= SEQUENCE { lpEth100TestType INTEGER, lpEth100TestFrmSize Unsigned32, lpEth100TestDuration Unsigned32 } lpEth100TestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { lpEth100TestPTOEntry 1 } lpEth100TestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { lpEth100TestPTOEntry 2 } lpEth100TestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { lpEth100TestPTOEntry 3 } lpEth100TestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEth100TestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { lpEth100Test 11 } lpEth100TestResultsEntry OBJECT-TYPE SYNTAX LpEth100TestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEth100TestResultsTable." INDEX { lpIndex, lpEth100Index, lpEth100TestIndex } ::= { lpEth100TestResultsTable 1 } LpEth100TestResultsEntry ::= SEQUENCE { lpEth100TestElapsedTime Counter32, lpEth100TestTimeRemaining Unsigned32, lpEth100TestCauseOfTermination INTEGER, lpEth100TestFrmTx PassportCounter64, lpEth100TestBitsTx PassportCounter64, lpEth100TestFrmRx PassportCounter64, lpEth100TestBitsRx PassportCounter64, lpEth100TestErroredFrmRx PassportCounter64 } lpEth100TestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { lpEth100TestResultsEntry 4 } lpEth100TestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { lpEth100TestResultsEntry 5 } lpEth100TestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { lpEth100TestResultsEntry 6 } lpEth100TestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { lpEth100TestResultsEntry 7 } lpEth100TestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { lpEth100TestResultsEntry 8 } lpEth100TestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEth100TestResultsEntry 9 } lpEth100TestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEth100TestResultsEntry 10 } lpEth100TestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { lpEth100TestResultsEntry 11 } -- LanApplication/n -- The LanApplication component, using the Framer subcomponent, is -- used to provide the interface between the VirtualRouter ProtocolPort -- and a LAN component such as Ethernet, Fddi, or TokenRing. la OBJECT IDENTIFIER ::= { components 105 } laRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of la components." ::= { la 1 } laRowStatusEntry OBJECT-TYPE SYNTAX LaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single la component." INDEX { laIndex } ::= { laRowStatusTable 1 } LaRowStatusEntry ::= SEQUENCE { laRowStatus RowStatus, laComponentName DisplayString, laStorageType StorageType, laIndex Integer32 } laRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of la components. These components can be added and deleted." ::= { laRowStatusEntry 1 } laComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { laRowStatusEntry 2 } laStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the la tables." ::= { laRowStatusEntry 4 } laIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the la tables." ::= { laRowStatusEntry 10 } laCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF LaCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { la 10 } laCidDataEntry OBJECT-TYPE SYNTAX LaCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laCidDataTable." INDEX { laIndex } ::= { laCidDataTable 1 } LaCidDataEntry ::= SEQUENCE { laCustomerIdentifier Unsigned32 } laCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { laCidDataEntry 1 } laMediaProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LaMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Media Application component." ::= { la 11 } laMediaProvEntry OBJECT-TYPE SYNTAX LaMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laMediaProvTable." INDEX { laIndex } ::= { laMediaProvTable 1 } LaMediaProvEntry ::= SEQUENCE { laLinkToProtocolPort Link } laLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates the application with a protocol port." ::= { laMediaProvEntry 1 } laIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF LaIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { la 12 } laIfEntryEntry OBJECT-TYPE SYNTAX LaIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laIfEntryTable." INDEX { laIndex } ::= { laIfEntryTable 1 } LaIfEntryEntry ::= SEQUENCE { laIfAdminStatus INTEGER, laIfIndex InterfaceIndex } laIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { laIfEntryEntry 1 } laIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { laIfEntryEntry 2 } laStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { la 13 } laStateEntry OBJECT-TYPE SYNTAX LaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laStateTable." INDEX { laIndex } ::= { laStateTable 1 } LaStateEntry ::= SEQUENCE { laAdminState INTEGER, laOperationalState INTEGER, laUsageState INTEGER } laAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { laStateEntry 1 } laOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { laStateEntry 2 } laUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { laStateEntry 3 } laOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LaOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { la 14 } laOperStatusEntry OBJECT-TYPE SYNTAX LaOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laOperStatusTable." INDEX { laIndex } ::= { laOperStatusTable 1 } LaOperStatusEntry ::= SEQUENCE { laSnmpOperStatus INTEGER } laSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { laOperStatusEntry 1 } -- LanApplication/n Framer -- The Framer component is used to link a LanApplication to a Lan -- interface such as Ethernet, Fddi, TokenRing or Ethernet100BaseT. laFramer OBJECT IDENTIFIER ::= { la 2 } laFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LaFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of laFramer components." ::= { laFramer 1 } laFramerRowStatusEntry OBJECT-TYPE SYNTAX LaFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single laFramer component." INDEX { laIndex, laFramerIndex } ::= { laFramerRowStatusTable 1 } LaFramerRowStatusEntry ::= SEQUENCE { laFramerRowStatus RowStatus, laFramerComponentName DisplayString, laFramerStorageType StorageType, laFramerIndex NonReplicated } laFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of laFramer components. These components cannot be added nor deleted." ::= { laFramerRowStatusEntry 1 } laFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { laFramerRowStatusEntry 2 } laFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the laFramer tables." ::= { laFramerRowStatusEntry 4 } laFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the laFramer tables." ::= { laFramerRowStatusEntry 10 } laFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LaFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link to the Lan interface such as Ethernet, Fddi, or TokenRing." ::= { laFramer 10 } laFramerProvEntry OBJECT-TYPE SYNTAX LaFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laFramerProvTable." INDEX { laIndex, laFramerIndex } ::= { laFramerProvTable 1 } LaFramerProvEntry ::= SEQUENCE { laFramerInterfaceName Link } laFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS obsolete DESCRIPTION "This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. This attribute is OBSOLETED and is redefined above as InterfaceName. The new attribute type is a LIST OF LINK with a maximum of two (2) HW components in a list. DESCRIPTION" ::= { laFramerProvEntry 1 } laFramerInterfaceNamesTable OBJECT-TYPE SYNTAX SEQUENCE OF LaFramerInterfaceNamesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. Only one (1) LAN interface can be linked to a Framer except for Ethernet100BaseT LAN interface, for which up to two (2) interfaces residing on the same LogicalProcessor can be linked. DESCRIPTION" ::= { laFramer 431 } laFramerInterfaceNamesEntry OBJECT-TYPE SYNTAX LaFramerInterfaceNamesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the laFramerInterfaceNamesTable." INDEX { laIndex, laFramerIndex, laFramerInterfaceNamesValue } ::= { laFramerInterfaceNamesTable 1 } LaFramerInterfaceNamesEntry ::= SEQUENCE { laFramerInterfaceNamesValue Link, laFramerInterfaceNamesRowStatus RowStatus } laFramerInterfaceNamesValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the laFramerInterfaceNamesTable." ::= { laFramerInterfaceNamesEntry 1 } laFramerInterfaceNamesRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the laFramerInterfaceNamesTable." ::= { laFramerInterfaceNamesEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { lpEnetLtFrmCmpComponentName, -- lpTrTransmitBeacons, -- lpFiTransmitCounts, -- lpEnetLtFbIpHStorageType, -- lpIlsFwdrFramesReceived, -- lpIlsFwdrLtFbIpxHTData, -- lpFiRingLatency, -- lpFiTvxExpiredCounts, -- lpFiLtFbTxInfoComponentName, -- lpEnetTestRowStatus, -- lpEnetLtFbMacEnetRowStatus, -- lpEnetLtFbDataTData, -- lpFiAcceptAa, -- lpTrLtCntlComponentName, -- lpFiRingOpCounts, -- lpFiStatusReportPolicy, -- lpTrTokenErrors, -- lpFiLtCntlTData, -- lpIlsFwdrTestBitsTx, -- lpIlsFwdrUsageState, -- lpFiLtFbFddiMacStorageType, -- lpFiOldDownstreamNeighbor, -- lpEnetLtCntlStorageType, -- lpTrGroupAddress, -- lpEnetMacAddress, -- lpTrLtPrtCfgRowStatus, -- laIfAdminStatus, -- lpEnetLtFbAppleHTData, -- lpEnetLtFbIpxHComponentName, -- laCustomerIdentifier, -- lpEth100LtFbAppleHComponentName, -- lpFiNotCopiedCounts, -- lpEth100ReceivedOctetsIntoRouterBr, -- lpIlsFwdrLtFbTxInfoTData, -- lpFiLtFrmCpyTData, -- lpEnetLtFbLlchRowStatus, -- lpEnetMultipleCollisionFrames, -- lpTrLtFrmCmpRowStatus, -- lpEth100LtFbMacEnetRowStatus, -- lpEth100FramesReceivedOk, -- lpIlsFwdrLtFbMacTrRowStatus, -- lpIlsFwdrTestFrmSize, -- lpFiTestFrmTx, -- lpFiValidTransmissionTimer, -- lpEnetLtFrmCpyStorageType, -- lpFiNcOldUpstreamNeighbor, -- lpEnetLtFbIpHTData, -- lpIlsFwdrTestElapsedTime, -- lpFiUserData, -- lpEth100LtFbIpHStorageType, -- lpIlsFwdrLtFbAppleHStorageType, -- lpFiLtFbStorageType, -- lpIlsFwdrLtFbMacEnetTData, -- lpEnetLtFbMacTrComponentName, -- lpFiLtPrtCfgRowStatus, -- lpEth100TestTimeRemaining, -- lpEnetLtFbTxInfoComponentName, -- lpTrTestTimeRemaining, -- lpEth100TestType, -- laLinkToProtocolPort, -- lpFiTestFrmRx, -- lpEnetComponentName, -- lpTrTestType, -- lpFiLtFbFddiMacTData, -- lpFiPhyStorageType, -- lpTrLtFbDataComponentName, -- lpTrTestElapsedTime, -- lpEnetLtCntlTData, -- lpFiTestDuration, -- lpFiCustomerIdentifier, -- lpTrRemoveRings, -- lpEnetLtFbFddiMacStorageType, -- lpTrIfIndex, -- lpIlsFwdrLtPrtCfgRowStatus, -- lpEnetFrameTooLongs, -- lpFiLtFbMacTrStorageType, -- lpEth100CommentText, -- lpEth100LtFbIpxHRowStatus, -- lpTrCommentText, -- lpTrLtFbIpxHRowStatus, -- lpEth100LtFbLlchTData, -- lpFiLtFbDataRowStatus, -- laComponentName, -- lpTrLtFbAppleHComponentName, -- lpEnetLtFrmCpyTData, -- lpEth100SingleCollisionFrames, -- lpEth100StorageType, -- lpTrStorageType, -- lpFiLateCounts, -- lpIlsFwdrTestErroredFrmRx, -- lpIlsFwdrLtFbMacEnetComponentName, -- lpFiLtFbTData, -- lpEth100LtFbIpHComponentName, -- lpEth100FramesTransmittedOk, -- lpFiFrameErrorFlag, -- lpTrLtFbIpHComponentName, -- lpFiLtFbAppleHRowStatus, -- lpIlsFwdrLtFbDataRowStatus, -- lpTrComponentName, -- lpEth100AdminState, -- lpFiDownstreamNeighbor, -- lpEnetLtFbStorageType, -- lpTrAdminState, -- lpIlsFwdrTestTimeRemaining, -- lpFiAcceptBs, -- lpEth100LtFbTxInfoRowStatus, -- lpTrApplicationFramerName, -- lpTrLtStorageType, -- lpTrLtFbTxInfoRowStatus, -- lpIlsFwdrProcessedCount, -- lpIlsFwdrLtFbDataComponentName, -- lpEnetTestFrmRx, -- lpEth100LateCollisions, -- lpEnetLtFbFddiMacTData, -- lpEth100ExcessiveCollisions, -- lpFiLtFbIpHRowStatus, -- lpEnetIfAdminStatus, -- lpFiPhyLemRejectCounts, -- lpEth100LtCntlComponentName, -- lpFiLtFbMacTrTData, -- lpEnetCustomerIdentifier, -- lpFiLtFrmCmpStorageType, -- lpEth100TestBitsTx, -- lpEth100TestRowStatus, -- lpIlsFwdrLtFbRowStatus, -- lpFiNcUpstreamNeighbor, -- lpTrTestBitsTx, -- lpEth100TestStorageType, -- lpEth100LtFbMacEnetStorageType, -- lpEnetSingleCollisionFrames, -- lpTrTestStorageType, -- lpEnetLtFbMacTrStorageType, -- lpEth100LtFrmCmpStorageType, -- lpIlsFwdrLtFbAppleHComponentName, -- lpTrChipSet, -- lpEnetLtFbDataRowStatus, -- lpEnetAlignmentErrors, -- lpIlsFwdrStorageType, -- lpTrRingState, -- lpFiLtCntlRowStatus, -- lpTrLtFrmCpyComponentName, -- lpFiVersion, -- lpEth100TestCauseOfTermination, -- lpEth100LtCntlStorageType, -- lpIlsFwdrLtFbIpHComponentName, -- lpEnetMacReceiveErrors, -- lpEnetLtFbTData, -- laFramerStorageType, -- lpFiTestErroredFrmRx, -- lpEth100ApplicationFramerName, -- lpEth100LtTData, -- lpIlsFwdrAdminState, -- lpEnetLtFbAppleHRowStatus, -- lpTrLtTData, -- lpFiComponentName, -- lpTrLtFbLlchStorageType, -- lpIlsFwdrLtStorageType, -- lpIlsFwdrLtFbTxInfoRowStatus, -- lpFiLtFrmCpyRowStatus, -- lpTrTestComponentName, -- lpEth100LtFbMacEnetTData, -- lpFiTestCauseOfTermination, -- lpEth100LtFrmCmpComponentName, -- lpEnetLtPrtCfgStorageType, -- lpTrLtFrmCpyStorageType, -- lpTrRingRecoverys, -- lpEth100LineSpeed, -- lpFiLtFrmCmpTData, -- lpFiLtFbIpxHStorageType, -- lpEnetLtFbIpHRowStatus, -- lpEth100LtFbFddiMacComponentName, -- lpIlsFwdrLtCntlComponentName, -- lpFiLtFbIpHStorageType, -- lpTrLtFbFddiMacComponentName, -- lpTrProductId, -- lpTrLtFbMacEnetTData, -- lpFiLtComponentName, -- lpEnetLtFrmCmpStorageType, -- lpIlsFwdrTestStorageType, -- lpIlsFwdrLtFbMacEnetStorageType, -- lpFiErrorCounts, -- lpTrSoftErrors, -- lpEth100AutoNegotiation, -- lpEth100LtRowStatus, -- laUsageState, -- lpFiLtPrtCfgTData, -- lpTrLtFbMacEnetStorageType, -- lpIlsFwdrLtFrmCpyComponentName, -- lpFiPhyLerCutoff, -- lpEth100LtFbMacTrTData, -- lpEnetLtCntlRowStatus, -- lpFiTestComponentName, -- lpFiLtFbMacEnetComponentName, -- lpTrLobeWires, -- lpIlsFwdrTestBitsRx, -- lpEth100LtFbFddiMacTData, -- lpFiLtFbTxInfoStorageType, -- lpTrTestBitsRx, -- lpTrLtFbLlchTData, -- lpIlsFwdrLtTData, -- lpEnetTestErroredFrmRx, -- lpIlsFwdrLtFbLlchStorageType, -- lpTrLtFbComponentName, -- lpEth100LtFbMacTrStorageType, -- lpFiNcOldDownstreamNeighbor, -- lpFiNeighborNotifyInterval, -- lpEnetLtPrtCfgTData, -- lpFiEcmState, -- lpEnetLtFrmCpyRowStatus, -- lpFiLtFbIpxHTData, -- lpFiPhyLemCounts, -- lpEnetTestCauseOfTermination, -- lpEth100DeferredTransmissions, -- lpEnetLtFrmCmpTData, -- lpEnetLtFbIpxHStorageType, -- lpFiLtFbLlchComponentName, -- lpFiLtFbRowStatus, -- lpIlsFwdrLtFbLlchComponentName, -- lpFiLostCounts, -- lpEnetLtComponentName, -- lpFiUsageState, -- lpEth100SnmpOperStatus, -- lpTrLtFbMacTrComponentName, -- lpTrSnmpOperStatus, -- lpEth100LtFbMacTrComponentName, -- lpFiLtFbComponentName, -- lpFiPhyRowStatus, -- lpEnetTestFrmTx, -- lpTrRingStatus, -- lpTrFunctionalAddress, -- lpEnetLtFbFddiMacRowStatus, -- lpFiLtFbTxInfoTData, -- lpEnetTestComponentName, -- lpEnetLtFbMacEnetComponentName, -- lpFiLtFbMacTrRowStatus, -- lpFiTestFrmSize, -- lpIlsFwdrLtFbLlchTData, -- lpEnetLtFbTxInfoStorageType, -- lpEnetSqeTestErrors, -- lpTrUpStream, -- lpFiTestElapsedTime, -- lpEth100ReceivedFramesIntoRouterBr, -- lpEth100LtFbDataStorageType, -- lpIlsFwdrLtFbAppleHTData, -- lpIlsFwdrLtFrmCmpRowStatus, -- lpIlsFwdrTestType, -- lpTrLtFbDataStorageType, -- lpEth100RowStatus, -- lpTrFrameCopiedErrors, -- lpTrRowStatus, -- lpEth100LtPrtCfgComponentName, -- lpTrLtFbMacEnetRowStatus, -- lpEnetLtFbIpxHTData, -- lpTrLtPrtCfgComponentName, -- laFramerInterfaceNamesRowStatus, -- lpTrVendor, -- lpEnetTestBitsRx, -- lpEnetLtFbLlchComponentName, -- lpTrLostFrameErrors, -- lpTrLtFrmCmpComponentName, -- lpIlsFwdrLtFbMacTrComponentName, -- lpIlsFwdrSnmpOperStatus, -- lpTrLtRowStatus, -- lpFiTokenCounts, -- lpEnetLtFbMacEnetStorageType, -- lpEth100ActualLineSpeed, -- lpEth100LtFbIpxHComponentName, -- lpTrOperationalState, -- lpFiCfState, -- lpTrLineErrors, -- laOperationalState, -- lpFiNcDownstreamNeighbor, -- lpEth100LtFbDataComponentName, -- lpTrLtFbIpHStorageType, -- lpFiLtFrmCmpRowStatus, -- lpEnetLtFbTxInfoTData, -- lpIlsFwdrErrorCount, -- lpIlsFwdrTestFrmTx, -- lpEnetLtFbLlchStorageType, -- lpTrTestRowStatus, -- lpEnetLtFbMacTrRowStatus, -- lpEnetTestFrmSize, -- lpTrLtFbDataTData, -- lpIlsFwdrLtFbDataStorageType, -- lpEnetTestElapsedTime, -- lpEth100LtFbIpHRowStatus, -- laStorageType, -- lpIlsFwdrRowStatus, -- lpIlsFwdrLtPrtCfgComponentName, -- lpEth100LtFbTData, -- lpFiCopiedCounts, -- lpTrMonitorParticipate, -- lpEth100MacAddress, -- lpTrLtCntlStorageType, -- lpFiTestTimeRemaining, -- lpFiPhyLerFlag, -- lpEth100LtFbAppleHTData, -- lpTrRingSpeed, -- lpEth100LtStorageType, -- lpFiTestType, -- lpTrLtFbAppleHTData, -- lpTrLtFbIpxHComponentName, -- lpFiLtFbDataComponentName, -- lpTrSingleStation, -- lpIlsFwdrLtFrmCmpComponentName, -- lpEth100LtFbLlchRowStatus, -- lpEth100MultipleCollisionFrames, -- lpTrLtFbLlchRowStatus, -- lpIlsFwdrLtRowStatus, -- lpEth100OctetsTransmittedOk, -- lpIlsFwdrIfIndex, -- lpIlsFwdrOperationalState, -- lpFiPhyLerEstimate, -- lpEth100LtFbIpHTData, -- lpEnetLtPrtCfgRowStatus, -- lpEth100LtFbTxInfoComponentName, -- laFramerRowStatus, -- lpTrLtFbIpHTData, -- lpFiCommentText, -- lpFiLtFbIpxHRowStatus, -- lpTrFreqErrors, -- lpIlsFwdrLtFbIpHStorageType, -- lpIlsFwdrLtFbFddiMacComponentName, -- lpFiLtFbAppleHComponentName, -- lpEth100TestFrmSize, -- lpEth100LtPrtCfgRowStatus, -- lpFiDupAddressTest, -- lpEnetLtFrmCmpRowStatus, -- lpIlsFwdrLtFbMacTrTData, -- lpIlsFwdrLtFbMacEnetRowStatus, -- lpFiStorageType, -- lpIlsFwdrLtFbDataTData, -- lpFiPhySignalBitsRcvd, -- lpEth100Vendor, -- lpTrLtFbTxInfoComponentName, -- lpEth100LtFbDataTData, -- lpEnetFcsErrors, -- lpEth100LtFrmCpyStorageType, -- lpFiLtFbIpHComponentName, -- lpEth100LtCntlTData, -- lpTrLtCntlTData, -- lpIlsFwdrComponentName, -- lpFiAdminState, -- lpIlsFwdrLtCntlStorageType, -- lpTrLtFbFddiMacStorageType, -- lpEth100FrameTooLongs, -- lpFiApplicationFramerName, -- lpFiLtStorageType, -- lpFiLtFbTxInfoRowStatus, -- lpIlsFwdrLtFbIpxHComponentName, -- lpEnetTestTimeRemaining, -- lpFiOperationalState, -- lpEnetTestType, -- lpEth100LtFrmCmpRowStatus, -- lpEnetLtFbDataComponentName, -- lpIlsFwdrLtFbIpxHRowStatus, -- lpFiLtFbFddiMacRowStatus, -- lpTrLtFrmCpyTData, -- lpFiLtCntlComponentName, -- lpEnetCarrierSenseErrors, -- lpIlsFwdrLtFrmCpyStorageType, -- lpEnetUsageState, -- lpFiTestBitsTx, -- lpIlsFwdrLtFbIpHTData, -- lpTrTestFrmTx, -- lpFiTestStorageType, -- lpFiLtFbMacEnetStorageType, -- lpEnetCommentText, -- lpEnetLtFbIpxHRowStatus, -- lpTrLtFbAppleHStorageType, -- lpEnetLtFbAppleHComponentName, -- lpEth100LtFbStorageType, -- lpFiPhyLctFailCounts, -- lpEnetLtFbMacTrTData, -- lpTrLtFbStorageType, -- lpIlsFwdrLtFbTxInfoComponentName, -- lpFiLtFrmCpyComponentName, -- lpEnetStorageType, -- lpEnetLtFbComponentName, -- lpFiPhyPcmState, -- lpFiTestBitsRx, -- lpEth100LtFrmCpyComponentName, -- lpTrTestFrmRx, -- lpIlsFwdrLtCntlTData, -- lpIlsFwdrLinkToTrafficSourceValue, -- lpEnetLtFbIpHComponentName, -- lpEth100IfAdminStatus, -- lpFiAcceptAs, -- lpEth100TestDuration, -- lpFiLtTData, -- lpFiBypassPresent, -- lpEth100CustomerIdentifier, -- lpTrTestDuration, -- lpFiLtFbLlchStorageType, -- lpEnetAdminState, -- lpTrCustomerIdentifier, -- lpFiNcMacAddress, -- lpEth100OctetsReceivedOk, -- lpEnetApplicationFramerName, -- lpEnetLtStorageType, -- lpEnetLtFbTxInfoRowStatus, -- lpFiPhyNeighborType, -- lpTrLtFbMacTrStorageType, -- lpFiUseThruBa, -- lpIlsFwdrLtCntlRowStatus, -- lpTrLtFbFddiMacTData, -- lpEth100LtFbDataRowStatus, -- lpIlsFwdrLtFrmCpyTData, -- lpTrLtFbDataRowStatus, -- lpEth100AlignmentErrors, -- lpFiLtFbFddiMacComponentName, -- lpEth100LtFbMacEnetComponentName, -- lpFiLtFbMacEnetTData, -- lpTrAcErrors, -- lpTrRingOpenStatus, -- lpEnetLtCntlComponentName, -- lpIlsFwdrLtFbLlchRowStatus, -- lpEnetHeartbeatPacket, -- lpEnetTestBitsTx, -- laAdminState, -- lpEnetTestStorageType, -- lpTrNcUpStream, -- lpTrLtFbTData, -- laRowStatus, -- lpEth100LtFbAppleHRowStatus, -- lpEth100TestFrmTx, -- lpIlsFwdrLtFbStorageType, -- lpTrLtFbAppleHRowStatus, -- laSnmpOperStatus, -- lpEth100IfIndex, -- lpTrBurstErrors, -- laIfIndex, -- lpIlsFwdrTestCauseOfTermination, -- lpEnetLtFrmCpyComponentName, -- lpEnetMacTransmitErrors, -- lpIlsFwdrTestFrmRx, -- lpEth100LtPrtCfgStorageType, -- lpEth100LtPrtCfgTData, -- lpIlsFwdrLtFbFddiMacTData, -- lpEnetLtFbRowStatus, -- lpTrLtPrtCfgStorageType, -- lpFiLtFbLlchTData, -- lpFiOldUpstreamNeighbor, -- lpIlsFwdrIfAdminStatus, -- lpTrMacAddress, -- lpIlsFwdrTestDuration, -- lpTrLtFbIpHRowStatus, -- lpEnetLtTData, -- lpTrIfAdminStatus, -- lpEth100LtFbComponentName, -- lpFiAcceptBm, -- lpTrLtFbMacTrTData, -- lpTrLtFrmCmpStorageType, -- lpEth100LtFbTxInfoStorageType, -- lpIlsFwdrLtFbMacTrStorageType, -- lpTrSignalLoss, -- lpEth100TestFrmRx, -- lpEnetTestDuration, -- lpFiPhyComponentName, -- lpIlsFwdrLtFbFddiMacStorageType, -- lpEth100ActualDuplexMode, -- lpFiRmtState, -- lpFiAcceptAm, -- lpFiLtFrmCmpComponentName, -- lpEnetOperationalState, -- lpEnetLtFbFddiMacComponentName, -- lpTrReceiveCongestions, -- lpEnetLtFbMacEnetTData, -- lpEth100UndersizeFrames, -- lpTrLtCntlRowStatus, -- lpFiLtFbMacTrComponentName, -- lpFiSnmpOperStatus, -- lpIlsFwdrLtFbTData, -- lpFiIfIndex, -- lpFiPhyLinkErrorMonitor, -- lpEth100TestErroredFrmRx, -- lpIlsFwdrLtFbAppleHRowStatus, -- lpTrTestErroredFrmRx, -- lpEth100ComponentName, -- lpFiTraceMaxExpirationTimer, -- lpEth100TestComponentName, -- lpTrLtPrtCfgTData, -- lpEth100LtFrmCpyRowStatus, -- lpTrNcMacAddress, -- lpTrLtFrmCpyRowStatus, -- lpIlsFwdrLtPrtCfgStorageType, -- lpFiPhySignalBitsTxmt, -- lpTrHardErrors, -- lpEth100LtFrmCmpTData, -- lpEnetLateCollisions, -- lpTrTestCauseOfTermination, -- lpEth100UsageState, -- lpIlsFwdrLtFbIpHRowStatus, -- lpEnetLtFbLlchTData, -- lpEth100LtFbIpxHStorageType, -- lpTrLtFrmCmpTData, -- lpTrLtFbIpxHStorageType, -- lpFiLtFbDataStorageType, -- lpIlsFwdrLtFrmCmpStorageType, -- lpEth100MacTransmitErrors, -- lpEth100LtFbLlchStorageType, -- lpEth100LtComponentName, -- lpFiRowStatus, -- lpIlsFwdrLtFbComponentName, -- lpTrLtComponentName, -- lpEth100LtFrmCpyTData, -- lpFiLtPrtCfgComponentName, -- lpFiVendor, -- lpFiFrameCounts, -- lpEnetDeferredTransmissions, -- lpEth100FcsErrors, -- lpEth100LtFbFddiMacRowStatus, -- lpFiLtFbAppleHStorageType, -- lpTrLtFbFddiMacRowStatus, -- lpFiTokenMaxTimer, -- lpIlsFwdrFramesDiscarded, -- lpIlsFwdrTestRowStatus, -- lpFiLtRowStatus, -- lpFiTokenRequestTimer, -- lpTrLtFbMacEnetComponentName, -- lpEnetSnmpOperStatus, -- lpEnetExcessiveCollisions, -- lpFiUpstreamNeighbor, -- lpEnetIfIndex, -- lpEth100SqeTestErrors, -- lpTrLtFbTxInfoStorageType, -- lpEth100LtFbAppleHStorageType, -- lpFiMacAddress, -- lpIlsFwdrLtPrtCfgTData, -- lpEth100MacReceiveErrors, -- lpFiPhySignalState, -- lpFiIfAdminStatus, -- lpTrAbortTransErrors, -- lpIlsFwdrLtFrmCpyRowStatus, -- lpEth100AutoNegStatus, -- lpEth100LtFbIpxHTData, -- lpFiTestRowStatus, -- lpFiLtFbMacEnetRowStatus, -- lpTrLtFbIpxHTData, -- lpFiTokenNegotiatedTimer, -- lpFiLtFbDataTData, -- lpEth100CarrierSenseErrors, -- lpEth100DuplexMode, -- lpIlsFwdrLtFrmCmpTData, -- lpIlsFwdrLtFbIpxHStorageType, -- laFramerComponentName, -- lpEth100LtFbLlchComponentName, -- lpEth100LtFbRowStatus, -- lpTrInternalErrors, -- lpEnetLtFbDataStorageType, -- lpTrLtFbRowStatus, -- lpIlsFwdrLtComponentName, -- lpTrLtFbLlchComponentName, -- lpFiLtFbIpHTData, -- lpEnetRowStatus, -- lpTrNodeAddress, -- lpFiLtCntlStorageType, -- lpTrUsageState, -- lpEth100TestBitsRx, -- lpEnetLtPrtCfgComponentName, -- laFramerInterfaceNamesValue, -- lpEnetVendor, -- lpFiLtFbAppleHTData, -- lpFiLtFbIpxHComponentName, -- lpEth100OperationalState, -- lpIlsFwdrLtFbFddiMacRowStatus, -- lpFiLtPrtCfgStorageType, -- lpFiLtFbLlchRowStatus, -- lpEth100LtFbTxInfoTData, -- lpEnetLtFbAppleHStorageType, -- lpIlsFwdrTestComponentName, -- lpTrLtFbTxInfoTData, -- lpFiAcceptBb, -- lpEnetLtRowStatus, -- lpEth100LtFbMacTrRowStatus, -- lpIlsFwdrLtFbTxInfoStorageType, -- lpFiLtFrmCpyStorageType, -- lpEth100LtFbFddiMacStorageType, -- lpTrLtFbMacTrRowStatus, -- lpTrTestFrmSize, -- lpTrLastTimeBeaconSent, -- lpFiPhyLerAlarm, -- lpEth100LtCntlRowStatus, -- lpEth100TestElapsedTime } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." lanDriversGroup OBJECT IDENTIFIER ::= { lanDriversMIB 1 } lanDriversGroupBE OBJECT IDENTIFIER ::= { lanDriversGroup 5 } lanDriversGroupBE01 OBJECT IDENTIFIER ::= { lanDriversGroupBE 2 } lanDriversGroupBE01A OBJECT IDENTIFIER ::= { lanDriversGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 LanDrivers." -- STATUS mandatory -- DESCRIPTION "LanDrivers MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-LanDriversMIB -- INCLUDES { lanDriversGroupBE01A } -- rfc1643 (Ethernet) -- -- SUPPORTS EtherLike-MIB -- INCLUDES { dot3StatsTable } -- dot3CollTable not supported -- -- -- rfc1512 (FDDI) -- -- SUPPORTS FDDI-SMT73-MIB -- INCLUDES { fddimibSMT, fddimibMAC, fddimibMACCounters, -- fddimibPORT } -- fddimibPATH not supported -- -- variations for fddimibSMT group -- -- VARIATION fddimibSMTStationAction -- ACCESS read-only -- DESCRIPTION "Generation of control signals is not supported -- in this implementation" -- -- -- variations for fddimibMAC group -- -- VARIATION fddimibMACRequestedPaths -- SYNTAX INTEGER (16, 32) -- DESCRIPTION "Only primary-preferred and secondary-preferred -- values supported" -- -- VARIATION fddimibMACFrameErrorThreshold -- SYNTAX INTEGER (0..0) -- DESCRIPTION "Variable thresholds not supported" -- -- VARIATION fddimibMACMAUnitdataEnable -- WRITE-SYNTAX INTEGER { true(1) } -- DESCRIPTION "Changing the value of this flag is not supported -- in this implementation" -- -- VARIATION fddimibMACNotCopiedThreshold -- SYNTAX INTEGER (0..0) -- ACCESS read-only -- DESCRIPTION "Variable thresholds not supported" -- -- -- variations for fddimibPORT group -- -- VARIATION fddimibPORTConnectionPolicies -- WRITE-SYNTAX INTEGER (0) -- DESCRIPTION "Only value supported is 0" -- -- VARIATION fddimibPORTRequestedPaths -- ACCESS read-only -- DESCRIPTION "A constant in this implementation" -- -- VARIATION fddimibPORTAction -- ACCESS read-only -- DESCRIPTION "Generation of control signals is not supported -- in this implementation" -- -- lanDriversCapabilities OBJECT IDENTIFIER ::= { lanDriversMIB 3 } lanDriversCapabilitiesBE OBJECT IDENTIFIER ::= { lanDriversCapabilities 5 } lanDriversCapabilitiesBE01 OBJECT IDENTIFIER ::= { lanDriversCapabilitiesBE 2 } lanDriversCapabilitiesBE01A OBJECT IDENTIFIER ::= { lanDriversCapabilitiesBE01 2 } END