Nortel-Magellan-Passport-ProvisioningMIB Nortel-Magellan-Passport-ProvisioningMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB RowPointer, DisplayString, StorageType, RowStatus, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, EnterpriseDateAndTime, AsciiStringIndex FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Provisioning Enterprise MIB." provisioningMIB OBJECT IDENTIFIER ::= { passportMIBs 19 } -- ProvisioningSystem -- This component implements the operator commands which are -- specific to the provisioning system. It also provides information -- about the state of the provisioning system. -- -- The ProvisioningSystem is automatically created on system start-up. prov OBJECT IDENTIFIER ::= { components 11 } provRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of prov components." ::= { prov 1 } provRowStatusEntry OBJECT-TYPE SYNTAX ProvRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single prov component." INDEX { provIndex } ::= { provRowStatusTable 1 } ProvRowStatusEntry ::= SEQUENCE { provRowStatus RowStatus, provComponentName DisplayString, provStorageType StorageType, provIndex NonReplicated } provRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of prov components. These components cannot be added nor deleted." ::= { provRowStatusEntry 1 } provComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { provRowStatusEntry 2 } provStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the prov tables." ::= { provRowStatusEntry 4 } provIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the prov tables." ::= { provRowStatusEntry 10 } provStateTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { prov 10 } provStateEntry OBJECT-TYPE SYNTAX ProvStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the provStateTable." INDEX { provIndex } ::= { provStateTable 1 } ProvStateEntry ::= SEQUENCE { provAdminState INTEGER, provOperationalState INTEGER, provUsageState INTEGER } provAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { provStateEntry 1 } provOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { provStateEntry 2 } provUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { provStateEntry 3 } provOperTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the ProvisioningSystem component." ::= { prov 11 } provOperEntry OBJECT-TYPE SYNTAX ProvOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the provOperTable." INDEX { provIndex } ::= { provOperTable 1 } ProvOperEntry ::= SEQUENCE { provProvisioningActivity INTEGER, provActivityProgress AsciiString, provCommittedFileName AsciiString, provCurrentViewFileName AsciiString, provLastUsedFileName AsciiString, provProvisioningSession RowPointer, provProvisioningUser AsciiString, provCheckRequired INTEGER, provNextFileSequenceNumber Unsigned32, provConfirmRequired INTEGER, provProvisioningDirectory AsciiString, provEditViewName AsciiString, provEditViewAddedComponents Unsigned32, provEditViewDeletedComponents Unsigned32, provEditViewChangedComponents Unsigned32, provStandbyCpActivity INTEGER, provStandbyCpActivityProgress AsciiString } provProvisioningActivity OBJECT-TYPE SYNTAX INTEGER { initialLoading(0), none(2), activation(3), initialActivation(4), rollingBack(5), saving(6), loadingOrApplying(7), semanticChecking(8), waitingForConfirm(9), clearing(11), copying(12), committing(13), deleting(14), confirming(15), adding(21) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the type of provisioning activity that the ProvisioningSystem component is performing." ::= { provOperEntry 1 } provActivityProgress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the status relating to a long-running command handled by the ProvisioningSystem. It is usually expressed as a percentage of the number of elements (for example, components) processed with respect to the total set of elements that need to be processed for that activity. Note that, one cannot assume that the percentage implies how much time the task may still take. The time to complete the activity is dependent on many things which are beyond the control of the ProvisioningSystem itself." ::= { provOperEntry 2 } provCommittedFileName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the name of the committed file. This is the file that will be used to obtain the provisioning data if the module restarts. Immediately after system power-up, this attribute contains the name of the file used during initial loading." ::= { provOperEntry 3 } provCurrentViewFileName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the name of the provisioning file that contains the current view provisioning data. After system power-up, this attribute contains the name of the file used during initial loading. If the current view data has not been saved, this attribute is empty." ::= { provOperEntry 4 } provLastUsedFileName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the last saved, loaded or committed file name. Immediately after system power-up, this attribute contains the name of the file used during initial loading." ::= { provOperEntry 5 } provProvisioningSession OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the component name of the operator session which is currently in provisioning mode. For example, NMIS Telnet Session/2 If no session is in provisioning mode, this attribute will be empty." ::= { provOperEntry 6 } provProvisioningUser OBJECT-TYPE SYNTAX AsciiString (SIZE (1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the userid of the operator who is currently provisioning the module. If no session is in provisioning mode, this attribute will be empty." ::= { provOperEntry 7 } provCheckRequired OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether semantic checking is required before activating the edit view." ::= { provOperEntry 8 } provNextFileSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..999) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is no longer supported." ::= { provOperEntry 9 } provConfirmRequired OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the operator must enter a Confirm Prov command in order to keep a newly activated current view in effect. If an activation is not confirmed within 20 minutes of its completion, the module will restart using the committed provisioning data." ::= { provOperEntry 10 } provProvisioningDirectory OBJECT-TYPE SYNTAX AsciiString (SIZE (1..128)) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute indicates the name of the provisioning directory." ::= { provOperEntry 11 } provEditViewName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the name of the provisioning view that represents the edit view provisioning data. If the edit view data has not been saved, this attribute is empty." ::= { provOperEntry 12 } provEditViewAddedComponents OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of provisioning components that have been added to the edit view with respect to the current view." ::= { provOperEntry 13 } provEditViewDeletedComponents OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of provisioned components that have been deleted from the edit view with respect to the current view." ::= { provOperEntry 14 } provEditViewChangedComponents OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of provisioned components whose attributes differ between the edit and current views." ::= { provOperEntry 15 } provStandbyCpActivity OBJECT-TYPE SYNTAX INTEGER { none(0), loadingProvisioningData(1), savingCommitFormatProvisioningData(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute descibes the type of provisionin activity, which ProvisioningSystem is performing on standby CP." ::= { provOperEntry 16 } provStandbyCpActivityProgress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates status of a provisioning activity, which ProvisioningSystem is performing on standby CP." ::= { provOperEntry 17 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Prov View/ -- This component represents information about provisioning views. -- -- Most of these views have been saved and can be activated or loaded. -- In this case, the format for is -- .. -- where is the view's name; is either full or part, -- is a unique sequence number generated by the system. -- -- The current and edit views are not necessarily saved. provView OBJECT IDENTIFIER ::= { prov 2 } provViewRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvViewRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of provView components." ::= { provView 1 } provViewRowStatusEntry OBJECT-TYPE SYNTAX ProvViewRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single provView component." INDEX { provIndex, provViewIndex } ::= { provViewRowStatusTable 1 } ProvViewRowStatusEntry ::= SEQUENCE { provViewRowStatus RowStatus, provViewComponentName DisplayString, provViewStorageType StorageType, provViewIndex AsciiStringIndex } provViewRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of provView components. These components cannot be added nor deleted." ::= { provViewRowStatusEntry 1 } provViewComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { provViewRowStatusEntry 2 } provViewStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the provView tables." ::= { provViewRowStatusEntry 4 } provViewIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the provView tables." ::= { provViewRowStatusEntry 10 } provViewOperTable OBJECT-TYPE SYNTAX SEQUENCE OF ProvViewOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the View component." ::= { provView 100 } provViewOperEntry OBJECT-TYPE SYNTAX ProvViewOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the provViewOperTable." INDEX { provIndex, provViewIndex } ::= { provViewOperTable 1 } ProvViewOperEntry ::= SEQUENCE { provViewUser AsciiString, provViewCheckState INTEGER, provViewComponents Unsigned32, provViewFormats OCTET STRING, provViewBaseView AsciiString, provViewVersion AsciiString, provViewCreationDate EnterpriseDateAndTime } provViewUser OBJECT-TYPE SYNTAX AsciiString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the userid of the operator who first saved this view. It may be empty if unknown or if the view has not been saved." ::= { provViewOperEntry 1 } provViewCheckState OBJECT-TYPE SYNTAX INTEGER { failed(0), unknown(1), partial(2), softwareChanged(3), full(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the semantic check state of the view when it was saved. The values are described in worst to best order. The failed state indicates that the view has failed a semantic check and cannot be activated. The unknown state indicates that semantic checks have not been run and the view cannot be activated. The partial state indicates that the view has passed incomplete checks, that is Check -changed Prov has succeeded. This is also the best state value for a partial view. Thew view cannot be activated until it has been fully checked. The softwareChanged state indicates that the view has passed complete checks, but by software other than that to be activated, that is, either the application versions have changed, or features have been added. After activation, the new software may detect semantic errors. After correcting these errors, if any, the view will need to be re-saved or re-committed as appropriate. The full state indicates that the view has passed complete checks, that is, it has been fully verified. It can be activated." ::= { provViewOperEntry 2 } provViewComponents OBJECT-TYPE SYNTAX Unsigned32 (0..999999) ACCESS read-only STATUS mandatory DESCRIPTION "This attributes indicates the number of provisioned components that have been (or could be) saved." ::= { provViewOperEntry 3 } provViewFormats OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the formats of the saved information. Each serves a different purpose. The ascii format is readable by operators and can be easily parsed and generated by scripts. NMS makes use of this format. Note that the syntax is subject to change without notice. This format is generated via Save -ascii Prov. A view with an ascii format can be loaded and activated. The commit format is generated via Commit Prov and allows for fast activation, that is, a shorter service outage time. The system will never leave a view with only this format, as it cannot be loaded. The delta format contains the changes made between the current view and the edit view. It is, therefore, much smaller and faster to Load or Save than the other formats. A view containing this format can be loaded or have the changes applied to the edit view. This provides a mechanism to propagate a set of changes from one view to another. A view containing only this format can be activated if this would not require a system reload. To generate this format, issue Save Prov without the -ascii or portable options. The part format is generated via Save component() Prov. The part format can be loaded. The syntax of this format is subject to change without notice. The portable format is a compact representation that can be quickly loaded. It can be transported from one Passport to another, or to an NMS. It is generated via Save -portable Prov. The portable format can be loaded and activated. Description of bits: ascii(0) commit(1) delta(2) part(3) portable(4)" ::= { provViewOperEntry 4 } provViewBaseView OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the name of the view upon which this view's changes are based (even if the delta format does not exists). In other words, it indicates the name of the current view that existed at the time that this view was saved. This may not be the name of the current view that is running now. This attribute is empty when the view is unsaved or if the current view was saved." ::= { provViewOperEntry 5 } provViewVersion OBJECT-TYPE SYNTAX AsciiString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the version of base software that saved this view. It is empty if unknown." ::= { provViewOperEntry 6 } provViewCreationDate OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the creation date of this view." ::= { provViewOperEntry 7 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { provEditViewAddedComponents, -- provEditViewDeletedComponents, -- provStorageType, -- provViewRowStatus, -- provViewVersion, -- provComponentName, -- provViewCheckState, -- provCheckRequired, -- provViewCreationDate, -- provProvisioningUser, -- provEditViewName, -- provCommittedFileName, -- provOperationalState, -- provViewBaseView, -- provAdminState, -- provViewComponentName, -- provViewFormats, -- provViewStorageType, -- provRowStatus, -- provViewComponents, -- provLastUsedFileName, -- provProvisioningSession, -- provStandbyCpActivity, -- provViewUser, -- provCurrentViewFileName, -- provActivityProgress, -- provEditViewChangedComponents, -- provUsageState, -- provStandbyCpActivityProgress, -- provConfirmRequired, -- provProvisioningActivity } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." provisioningGroup OBJECT IDENTIFIER ::= { provisioningMIB 1 } provisioningGroupBE OBJECT IDENTIFIER ::= { provisioningGroup 5 } provisioningGroupBE00 OBJECT IDENTIFIER ::= { provisioningGroupBE 1 } provisioningGroupBE00A OBJECT IDENTIFIER ::= { provisioningGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Provisioning." -- STATUS mandatory -- DESCRIPTION "Provisioning MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-ProvisioningMIB -- INCLUDES { provisioningGroupBE00A } provisioningCapabilities OBJECT IDENTIFIER ::= { provisioningMIB 3 } provisioningCapabilitiesBE OBJECT IDENTIFIER ::= { provisioningCapabilities 5 } provisioningCapabilitiesBE00 OBJECT IDENTIFIER ::= { provisioningCapabilitiesBE 1 } provisioningCapabilitiesBE00A OBJECT IDENTIFIER ::= { provisioningCapabilitiesBE00 2 } END