Nortel-Magellan-Passport-TrunksMIB Nortel-Magellan-Passport-TrunksMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, PassportCounter64, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, FixedPoint1 FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Trunks Enterprise MIB." trunksMIB OBJECT IDENTIFIER ::= { passportMIBs 43 } -- Trunk/n -- The Trunk component provides a Passport to Passport connection. It -- controls a protocol stack associated with a logical port on a function -- processor that provides an interconnection to another Passport with -- a Trunk component. -- It requires the existence of the Routing component. Note that -- dpnRouting also needs to be included in the featureList of CP's -- LogicalProcessorType component. -- Either an AtmAccess or an Unacknowledged subcomponent must be -- added to provide the underlying link protocol and associated -- hardware that the Trunk will use. trk OBJECT IDENTIFIER ::= { components 60 } trkRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of trk components." ::= { trk 1 } trkRowStatusEntry OBJECT-TYPE SYNTAX TrkRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single trk component." INDEX { trkIndex } ::= { trkRowStatusTable 1 } TrkRowStatusEntry ::= SEQUENCE { trkRowStatus RowStatus, trkComponentName DisplayString, trkStorageType StorageType, trkIndex Integer32 } trkRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of trk components. These components can be added and deleted." ::= { trkRowStatusEntry 1 } trkComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { trkRowStatusEntry 2 } trkStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the trk tables." ::= { trkRowStatusEntry 4 } trkIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the trk tables." ::= { trkRowStatusEntry 10 } trkIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { trk 100 } trkIfEntryEntry OBJECT-TYPE SYNTAX TrkIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkIfEntryTable." INDEX { trkIndex } ::= { trkIfEntryTable 1 } TrkIfEntryEntry ::= SEQUENCE { trkIfAdminStatus INTEGER, trkIfIndex InterfaceIndex } trkIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { trkIfEntryEntry 1 } trkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { trkIfEntryEntry 2 } trkProvTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes provides the parameters used by the layer 3 Trunk to Trunk staging protocol." ::= { trk 101 } trkProvEntry OBJECT-TYPE SYNTAX TrkProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkProvTable." INDEX { trkIndex } ::= { trkProvTable 1 } TrkProvEntry ::= SEQUENCE { trkExpectedRemoteNodeName AsciiString, trkRemoteValidationAction INTEGER, trkMaximumExpectedRoundTripDelay Unsigned32, trkIdleTimeOut Unsigned32 } trkExpectedRemoteNodeName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the expected node name of the module to which this Trunk is connected. Once entered, the node name must correspond to the Mod nodeName attribute of the remote node. The Trunk end points exchange their node name through the Trunk staging protocol. The staged value is validated and the remoteValidationAction will be executed for those values not matching the value supplied for this attribute. If this attribute is an empty string, then the comparison is always successful." ::= { trkProvEntry 1 } trkRemoteValidationAction OBJECT-TYPE SYNTAX INTEGER { continue(0), disable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemoteNodeName attribute. If this attribute is provisioned to continue then upon an unsuccessful validation staging continues, otherwise, if disable is set then the Trunk does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when the expectedRemoteNodeName has been set result in the generation of an alarm." DEFVAL { continue } ::= { trkProvEntry 2 } trkMaximumExpectedRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (1..1500) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum round trip delay value used by the Trunk staging protocol, in conjunction with measuredSpeedToIf, to determine if it has taken too long to successfully stage with a remote Trunk. The value specified must be larger than the measuredRoundTripDelay or the Trunk may not successfully stage." DEFVAL { 1500 } ::= { trkProvEntry 3 } trkIdleTimeOut OBJECT-TYPE SYNTAX Unsigned32 (2..30) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Trunk protocol idle time out duration in units of seconds. If the local Trunk does not receive any packets from the link for the period specified by this attribute, the Trunk enters Are You There (AYT) mode for up to two seconds. If the Trunk does not receive any packets from the remote during the AYT mode it will restage; otherwise, it exits AYT mode and continues to provide service." DEFVAL { 4 } ::= { trkProvEntry 4 } trkOverridesTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkOverridesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Theses attribute comprise the set of provisionable override parameters supported by both the Trunk and DpnGateway components. The attributes are used when reporting operational attributes (used for metric calculations) to the routing system." ::= { trk 102 } trkOverridesEntry OBJECT-TYPE SYNTAX TrkOverridesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkOverridesTable." INDEX { trkIndex } ::= { trkOverridesTable 1 } TrkOverridesEntry ::= SEQUENCE { trkOverrideTransmitSpeed Gauge32, trkOldOverrideRoundTripDelay Gauge32, trkOverrideRoundTripUsec FixedPoint1 } trkOverrideTransmitSpeed OBJECT-TYPE SYNTAX Gauge32 (0 | 1000..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This is the overridden value of link speed (bit/s) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote." DEFVAL { 0 } ::= { trkOverridesEntry 1 } trkOldOverrideRoundTripDelay OBJECT-TYPE SYNTAX Gauge32 (0..1500) ACCESS read-write STATUS obsolete DESCRIPTION "This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote." DEFVAL { 0 } ::= { trkOverridesEntry 2 } trkOverrideRoundTripUsec OBJECT-TYPE SYNTAX FixedPoint1 (0..15000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote." DEFVAL { 0 } ::= { trkOverridesEntry 3 } trkStateTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide." ::= { trk 103 } trkStateEntry OBJECT-TYPE SYNTAX TrkStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkStateTable." INDEX { trkIndex } ::= { trkStateTable 1 } TrkStateEntry ::= SEQUENCE { trkAdminState INTEGER, trkOperationalState INTEGER, trkUsageState INTEGER, trkAvailabilityStatus OCTET STRING, trkProceduralStatus OCTET STRING, trkControlStatus OCTET STRING, trkAlarmStatus OCTET STRING, trkStandbyStatus INTEGER, trkUnknownStatus INTEGER } trkAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { unlocked } ::= { trkStateEntry 1 } trkOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { disabled } ::= { trkStateEntry 2 } trkUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { idle } ::= { trkStateEntry 3 } trkAvailabilityStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)" ::= { trkStateEntry 4 } trkProceduralStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)" ::= { trkStateEntry 5 } trkControlStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)" ::= { trkStateEntry 6 } trkAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)" ::= { trkStateEntry 7 } trkStandbyStatus OBJECT-TYPE SYNTAX INTEGER { hotStandby(0), coldStandby(1), providingService(2), notSet(15) } ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource." DEFVAL { notSet } ::= { trkStateEntry 8 } trkUnknownStatus OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure." DEFVAL { false } ::= { trkStateEntry 9 } trkOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { trk 104 } trkOperStatusEntry OBJECT-TYPE SYNTAX TrkOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkOperStatusTable." INDEX { trkIndex } ::= { trkOperStatusTable 1 } TrkOperStatusEntry ::= SEQUENCE { trkSnmpOperStatus INTEGER } trkSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { trkOperStatusEntry 1 } trkOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the group of operational attributes supported by the Trunk." ::= { trk 105 } trkOperEntry OBJECT-TYPE SYNTAX TrkOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkOperTable." INDEX { trkIndex } ::= { trkOperTable 1 } TrkOperEntry ::= SEQUENCE { trkRemoteComponentName AsciiString } trkRemoteComponentName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..27)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the component name of the remote end which it has supplied through the Trunk staging protocol." ::= { trkOperEntry 1 } trkTransportTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkTransportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes contains the set of operational parameters measured and maintained by both the Trunk and DpnGateway components." ::= { trk 106 } trkTransportEntry OBJECT-TYPE SYNTAX TrkTransportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkTransportTable." INDEX { trkIndex } ::= { trkTransportTable 1 } TrkTransportEntry ::= SEQUENCE { trkMeasuredSpeedToIf Gauge32, trkMeasuredRoundTripDelay Gauge32, trkMaxTxUnit Gauge32, trkMeasuredRoundTripDelayUsec FixedPoint1 } trkMeasuredSpeedToIf OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if a channelized port (E1/DS1) is used, the value is the measured transmit speed of the Channel. For a Trunk with an AtmAccess subcomponent, the value is calculated by converting the VCC transmit cell rate to an equivalent bit rate. The VCC transmit cell rate is determined based on the vccReportingBw attribute of the Trunk AtmAccess component. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is used. If vccReportingBw has a value of acr, the best measurement of the actual cell rate (ACR) of the VCC is used, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). For a DpnGateway with a FrAccess subcomponent, the value indicates the committedInformationRate of FrAccess FrMuxSetup. A value of zero is displayed when the underlying facility is disabled or the current 'transmittable' bandwidth is unknown." DEFVAL { 0 } ::= { trkTransportEntry 1 } trkMeasuredRoundTripDelay OBJECT-TYPE SYNTAX Gauge32 (0..1500) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown." DEFVAL { 0 } ::= { trkTransportEntry 2 } trkMaxTxUnit OBJECT-TYPE SYNTAX Gauge32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the data and routing headers. A value of zero indicates the MTU has not yet been determined." DEFVAL { 0 } ::= { trkTransportEntry 3 } trkMeasuredRoundTripDelayUsec OBJECT-TYPE SYNTAX FixedPoint1 (0..15000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown." DEFVAL { 0 } ::= { trkTransportEntry 4 } trkStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These attributes comprise the statistics collected by the Trunk component." ::= { trk 107 } trkStatsEntry OBJECT-TYPE SYNTAX TrkStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkStatsTable." INDEX { trkIndex } ::= { trkStatsTable 1 } TrkStatsEntry ::= SEQUENCE { trkAreYouThereModeEntries Counter32, trkPktFromIf PassportCounter64, trkTrunkPktFromIf Counter32, trkTrunkPktToIf Counter32, trkDiscardUnforward PassportCounter64, trkDiscardTrunkPktFromIf Counter32, trkIntPktFromIf PassportCounter64, trkDiscardIntUnforward PassportCounter64, trkStagingAttempts Counter32, trkDiscardTrunkPktToIf Counter32, trkUtilization Gauge32 } trkAreYouThereModeEntries OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times that the component has entered Are You There mode. This counter wraps around to zero when the maximum value is exceeded." ::= { trkStatsEntry 1 } trkPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received from the remote module. It does not include the packets received from the interrupting queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkStatsEntry 2 } trkTrunkPktFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal trunk protocol packets (including those from the interrupting queue) received from the remote module. These packets are forwarded to the Trunk component. This counter wraps around to zero when the maximum value is exceeded." ::= { trkStatsEntry 3 } trkTrunkPktToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded." ::= { trkStatsEntry 4 } trkDiscardUnforward OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received from the remote module that have been discarded. It does not include the packets received from the interrupting queue that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increase are: (1) the remote protocol is not compatible with the local protocol stack or, (2) the packet cannot be forwarded due to a recent loss of connectivity or due to congestion." ::= { trkStatsEntry 5 } trkDiscardTrunkPktFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal trunk protocol packets (including those on the interrupting queue) received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. The three main reasons that cause this counter to increase are: (1) the two Trunks are not synchronized, (2) the remote trunk protocol is not the same version as the local protocol, and (3) the remote trunk has restaged." ::= { trkStatsEntry 6 } trkIntPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received on the interrupting queue from the remote module. This counter wraps around to zero when the maximum value is exceeded." ::= { trkStatsEntry 7 } trkDiscardIntUnforward OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received on the interrupting queue from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion." ::= { trkStatsEntry 8 } trkStagingAttempts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times that the staging protocol has attempted to stage with the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the local hardware is up but, the local protocol cannot stage with the remote protocol due to a faulty connection. If the value is zero, then the local hardware has never enabled successfully." ::= { trkStatsEntry 9 } trkDiscardTrunkPktToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) that have been discarded before being transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the trunk can not get sufficient resources to create an internal trunk protocol packet." ::= { trkStatsEntry 10 } trkUtilization OBJECT-TYPE SYNTAX Gauge32 (0..200) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the average trunk utilization. For a Trunk/n with an Unack subcomponent, the value is the link receive utilization. It is calculated every minute by comparing the number of octets received from the remote module against the value of the Trunk/n measuredSpeedToIf. Since the trunk application solely owns the physical link, the maximum link utilization is 100%. For a Trunk/n with an AtmAccess subcomponent, the value is the VCC(s) transmit utilization. It is calculated every 30 seconds by comparing the number of cells transmitted by AtmIf Vcc(s) against the value of the Trunk/n measuredSpeedToIf. The VCCs include the trunk VCC indicated by atmConnection of Trunk/n AtmAccess and the PORS SPO (Short Path Oriented) multiplexing VCC if applicable. The PORS SPO multiplexing VCC only applies to a Trunk/n with subcomponents Pa AtmAccess, where the mode of AtmAccess is multiplexing, and the AtmAccess is linked to a second VCC indicated by atmConnection of Pa AtmAccess. Since the trunk application shares a physical link with other applications, the VCCs utilization can exceed 100%, and the value 200% is chosen as the maximum calculated utilization." ::= { trkStatsEntry 11 } trkSpeedReportingTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkSpeedReportingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of provisionable attributes provides the ability to disable or enable the generation of speed change alarms by the Trunk component. It also provides the ability to disable or enable the Dynamic Speed Reporting mechanism." ::= { trk 109 } trkSpeedReportingEntry OBJECT-TYPE SYNTAX TrkSpeedReportingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkSpeedReportingTable." INDEX { trkIndex } ::= { trkSpeedReportingTable 1 } TrkSpeedReportingEntry ::= SEQUENCE { trkSpeedReportingHoldOff Unsigned32, trkLowSpeedAlarmThreshold Unsigned32, trkHighSpeedAlarmThreshold Unsigned32 } trkSpeedReportingHoldOff OBJECT-TYPE SYNTAX Unsigned32 (1..1200) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the hold off time for reporting speed increases. When the measuredSpeedToIf reaches a level specified by the speedReportingThresholds attribute, the value specifies the duration (in units of seconds) for which the measuredSpeedToIf must maintain that level before it will be reported." DEFVAL { 30 } ::= { trkSpeedReportingEntry 2 } trkLowSpeedAlarmThreshold OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the lower end of the range of normal speeds for this Trunk. If the measuredSpeedToIf drops below this value the Trunk component generates a SET alarm. When the measuredSpeedToIf reaches or exceeds the value of this attribute, the Trunk component will generate a CLEAR alarm." DEFVAL { 0 } ::= { trkSpeedReportingEntry 3 } trkHighSpeedAlarmThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the upper end of the range of normal speeds for this Trunk. If the measuredSpeedToIf exceeds this value the Trunk component generates a SET alarm. When the measuredSpeedToIf returns to or falls below the value of this attribute, the Trunk component will generate a CLEAR alarm." DEFVAL { 4294967295 } ::= { trkSpeedReportingEntry 4 } trkSpdThTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkSpdThEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute controls the behavior of the Dynamic Speed Reporting mechanism. If its value is empty then the mechanism is disabled and neither increases nor decreases are reported. Otherwise, the attribute may contain up to seven threshold levels which are used to control the reporting of speed increases. Speed decreases are always reported immediately. If the measuredSpeedToIf increases such that it reaches one of the threshold levels which is greater than the last reported speed, the Trunk starts the speedReportingHoldOff timer. If the speed remains above this threshold until the timer expires, the Trunk component then reports the measuredSpeedToIf; otherwise the increase is not reported." ::= { trk 318 } trkSpdThEntry OBJECT-TYPE SYNTAX TrkSpdThEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkSpdThTable." INDEX { trkIndex, trkSpdThValue } ::= { trkSpdThTable 1 } TrkSpdThEntry ::= SEQUENCE { trkSpdThValue Integer32, trkSpdThRowStatus RowStatus } trkSpdThValue OBJECT-TYPE SYNTAX Integer32 (0..268435455) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the trkSpdThTable." ::= { trkSpdThEntry 1 } trkSpdThRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the trkSpdThTable." ::= { trkSpdThEntry 2 } trkPktBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of packets received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1, and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded." ::= { trk 368 } trkPktBpEntry OBJECT-TYPE SYNTAX TrkPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkPktBpTable." INDEX { trkIndex, trkPktBpIndex } ::= { trkPktBpTable 1 } TrkPktBpEntry ::= SEQUENCE { trkPktBpIndex INTEGER, trkPktBpValue PassportCounter64 } trkPktBpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the trkPktBpTable specific index for the trkPktBpTable." ::= { trkPktBpEntry 1 } trkPktBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkPktBpTable." ::= { trkPktBpEntry 2 } trkDiscBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of packets received from the remote module that have been discarded. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion. DESCRIPTION" ::= { trk 369 } trkDiscBpEntry OBJECT-TYPE SYNTAX TrkDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkDiscBpTable." INDEX { trkIndex, trkDiscBpIndex } ::= { trkDiscBpTable 1 } TrkDiscBpEntry ::= SEQUENCE { trkDiscBpIndex INTEGER, trkDiscBpValue PassportCounter64 } trkDiscBpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the trkDiscBpTable specific index for the trkDiscBpTable." ::= { trkDiscBpEntry 1 } trkDiscBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkDiscBpTable." ::= { trkDiscBpEntry 2 } trkOctBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the octets coming from the remote module which are received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded." ::= { trk 370 } trkOctBpEntry OBJECT-TYPE SYNTAX TrkOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkOctBpTable." INDEX { trkIndex, trkOctBpIndex } ::= { trkOctBpTable 1 } TrkOctBpEntry ::= SEQUENCE { trkOctBpIndex INTEGER, trkOctBpValue PassportCounter64 } trkOctBpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the trkOctBpTable specific index for the trkOctBpTable." ::= { trkOctBpEntry 1 } trkOctBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkOctBpTable." ::= { trkOctBpEntry 2 } -- Trunk/n PorsStatistics -- This is a dynamic subcomponent of a Trunk which appears when a -- PathAdmin component is provisioned under the Trunk supporting -- interrupting priority queue. It contains statistics associated with -- PORS traffic for a Trunk component. trkPorsStats OBJECT IDENTIFIER ::= { trk 6 } trkPorsStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPorsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of trkPorsStats components." ::= { trkPorsStats 1 } trkPorsStatsRowStatusEntry OBJECT-TYPE SYNTAX TrkPorsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single trkPorsStats component." INDEX { trkIndex, trkPorsStatsIndex } ::= { trkPorsStatsRowStatusTable 1 } TrkPorsStatsRowStatusEntry ::= SEQUENCE { trkPorsStatsRowStatus RowStatus, trkPorsStatsComponentName DisplayString, trkPorsStatsStorageType StorageType, trkPorsStatsIndex NonReplicated } trkPorsStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of trkPorsStats components. These components cannot be added nor deleted." ::= { trkPorsStatsRowStatusEntry 1 } trkPorsStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { trkPorsStatsRowStatusEntry 2 } trkPorsStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the trkPorsStats tables." ::= { trkPorsStatsRowStatusEntry 4 } trkPorsStatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the trkPorsStats tables." ::= { trkPorsStatsRowStatusEntry 10 } trkPorsStatsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPorsStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This operational group provides the PORS Trunks interrupting and normal traffic statistics for operator console display." ::= { trkPorsStats 10 } trkPorsStatsOperEntry OBJECT-TYPE SYNTAX TrkPorsStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkPorsStatsOperTable." INDEX { trkIndex, trkPorsStatsIndex } ::= { trkPorsStatsOperTable 1 } TrkPorsStatsOperEntry ::= SEQUENCE { trkPorsStatsPorsNormPktFromIf PassportCounter64, trkPorsStatsPorsNormDiscUnforwardFromIf PassportCounter64, trkPorsStatsPorsNormOctetFromIf PassportCounter64, trkPorsStatsPorsIntPktFromIf PassportCounter64, trkPorsStatsPorsIntDiscUnforwardFromIf PassportCounter64, trkPorsStatsPorsIntOctetFromIf PassportCounter64 } trkPorsStatsPorsNormPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of normal priority packets received on the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 1 } trkPorsStatsPorsNormDiscUnforwardFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of normal priority packets discarded from the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 2 } trkPorsStatsPorsNormOctetFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of normal priority bytes received on the PORS Trunk normal priority queue.This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 3 } trkPorsStatsPorsIntPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupting priority packets received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 4 } trkPorsStatsPorsIntDiscUnforwardFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupting priority packets discarded from the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 5 } trkPorsStatsPorsIntOctetFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupting priority bytes received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded." ::= { trkPorsStatsOperEntry 6 } trkPorsStatsPktBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPorsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of PORS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkPorsStats 371 } trkPorsStatsPktBpEntry OBJECT-TYPE SYNTAX TrkPorsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkPorsStatsPktBpTable." INDEX { trkIndex, trkPorsStatsIndex, trkPorsStatsPktBpEpIndex, trkPorsStatsPktBpDpIndex } ::= { trkPorsStatsPktBpTable 1 } TrkPorsStatsPktBpEntry ::= SEQUENCE { trkPorsStatsPktBpEpIndex INTEGER, trkPorsStatsPktBpDpIndex INTEGER, trkPorsStatsPktBpValue PassportCounter64 } trkPorsStatsPktBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkPorsStatsPktBpTable." ::= { trkPorsStatsPktBpEntry 1 } trkPorsStatsPktBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkPorsStatsPktBpTable." ::= { trkPorsStatsPktBpEntry 2 } trkPorsStatsPktBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkPorsStatsPktBpTable." ::= { trkPorsStatsPktBpEntry 3 } trkPorsStatsDiscBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPorsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of PORS packets received from the remote module that have been discarded. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkPorsStats 372 } trkPorsStatsDiscBpEntry OBJECT-TYPE SYNTAX TrkPorsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkPorsStatsDiscBpTable." INDEX { trkIndex, trkPorsStatsIndex, trkPorsStatsDiscBpEpIndex, trkPorsStatsDiscBpDpIndex } ::= { trkPorsStatsDiscBpTable 1 } TrkPorsStatsDiscBpEntry ::= SEQUENCE { trkPorsStatsDiscBpEpIndex INTEGER, trkPorsStatsDiscBpDpIndex INTEGER, trkPorsStatsDiscBpValue PassportCounter64 } trkPorsStatsDiscBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkPorsStatsDiscBpTable." ::= { trkPorsStatsDiscBpEntry 1 } trkPorsStatsDiscBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkPorsStatsDiscBpTable." ::= { trkPorsStatsDiscBpEntry 2 } trkPorsStatsDiscBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkPorsStatsDiscBpTable." ::= { trkPorsStatsDiscBpEntry 3 } trkPorsStatsOctBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkPorsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of PORS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkPorsStats 373 } trkPorsStatsOctBpEntry OBJECT-TYPE SYNTAX TrkPorsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkPorsStatsOctBpTable." INDEX { trkIndex, trkPorsStatsIndex, trkPorsStatsOctBpEpIndex, trkPorsStatsOctBpDpIndex } ::= { trkPorsStatsOctBpTable 1 } TrkPorsStatsOctBpEntry ::= SEQUENCE { trkPorsStatsOctBpEpIndex INTEGER, trkPorsStatsOctBpDpIndex INTEGER, trkPorsStatsOctBpValue PassportCounter64 } trkPorsStatsOctBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkPorsStatsOctBpTable." ::= { trkPorsStatsOctBpEntry 1 } trkPorsStatsOctBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkPorsStatsOctBpTable." ::= { trkPorsStatsOctBpEntry 2 } trkPorsStatsOctBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkPorsStatsOctBpTable." ::= { trkPorsStatsOctBpEntry 3 } -- Trunk/n ForwardingStatistics -- This is a dynamic subcomponent of a Trunk or DpnGateway which -- appears when packet forwarding traffic is used over the Trunk or -- DpnGateway. It contains statistics associated with packet -- forwarding traffic for Trunks and DpnGateways. trkFwdStats OBJECT IDENTIFIER ::= { trk 7 } trkFwdStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkFwdStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of trkFwdStats components." ::= { trkFwdStats 1 } trkFwdStatsRowStatusEntry OBJECT-TYPE SYNTAX TrkFwdStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single trkFwdStats component." INDEX { trkIndex, trkFwdStatsIndex } ::= { trkFwdStatsRowStatusTable 1 } TrkFwdStatsRowStatusEntry ::= SEQUENCE { trkFwdStatsRowStatus RowStatus, trkFwdStatsComponentName DisplayString, trkFwdStatsStorageType StorageType, trkFwdStatsIndex NonReplicated } trkFwdStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of trkFwdStats components. These components cannot be added nor deleted." ::= { trkFwdStatsRowStatusEntry 1 } trkFwdStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { trkFwdStatsRowStatusEntry 2 } trkFwdStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the trkFwdStats tables." ::= { trkFwdStatsRowStatusEntry 4 } trkFwdStatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the trkFwdStats tables." ::= { trkFwdStatsRowStatusEntry 10 } trkFwdStatsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkFwdStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This operational group counts the Trunk or DpnGateway packet forwarding traffic statistics for operator console display." ::= { trkFwdStats 10 } trkFwdStatsOperEntry OBJECT-TYPE SYNTAX TrkFwdStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkFwdStatsOperTable." INDEX { trkIndex, trkFwdStatsIndex } ::= { trkFwdStatsOperTable 1 } TrkFwdStatsOperEntry ::= SEQUENCE { trkFwdStatsFwdPktFromIf PassportCounter64, trkFwdStatsFwdDiscUnforwardFromIf PassportCounter64, trkFwdStatsFwdOctetFromIf PassportCounter64 } trkFwdStatsFwdPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of forwarding packets received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded." ::= { trkFwdStatsOperEntry 1 } trkFwdStatsFwdDiscUnforwardFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of forwarding packets discarded by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded." ::= { trkFwdStatsOperEntry 2 } trkFwdStatsFwdOctetFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of forwarding bytes received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded." ::= { trkFwdStatsOperEntry 3 } -- Trunk/n VirtualNetworkStatistics -- This is a dynamic subcomponent of a Trunk which appears when -- virtual networking system (VNS) traffic is used over the Trunk. It -- contains statistics associated with virtual traffic network for the -- Trunk. trkVnsStats OBJECT IDENTIFIER ::= { trk 8 } trkVnsStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkVnsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of trkVnsStats components." ::= { trkVnsStats 1 } trkVnsStatsRowStatusEntry OBJECT-TYPE SYNTAX TrkVnsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single trkVnsStats component." INDEX { trkIndex, trkVnsStatsIndex } ::= { trkVnsStatsRowStatusTable 1 } TrkVnsStatsRowStatusEntry ::= SEQUENCE { trkVnsStatsRowStatus RowStatus, trkVnsStatsComponentName DisplayString, trkVnsStatsStorageType StorageType, trkVnsStatsIndex NonReplicated } trkVnsStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of trkVnsStats components. These components cannot be added nor deleted." ::= { trkVnsStatsRowStatusEntry 1 } trkVnsStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { trkVnsStatsRowStatusEntry 2 } trkVnsStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the trkVnsStats tables." ::= { trkVnsStatsRowStatusEntry 4 } trkVnsStatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the trkVnsStats tables." ::= { trkVnsStatsRowStatusEntry 10 } trkVnsStatsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkVnsStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This operational group counts the Trunk virtual network traffic statistics for operator console display." ::= { trkVnsStats 10 } trkVnsStatsOperEntry OBJECT-TYPE SYNTAX TrkVnsStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkVnsStatsOperTable." INDEX { trkIndex, trkVnsStatsIndex } ::= { trkVnsStatsOperTable 1 } TrkVnsStatsOperEntry ::= SEQUENCE { trkVnsStatsVnsPktFromIf PassportCounter64, trkVnsStatsVnsDiscUnforwardFromIf PassportCounter64, trkVnsStatsVnsOctetFromIf PassportCounter64 } trkVnsStatsVnsPktFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of virtual network packets received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded." ::= { trkVnsStatsOperEntry 1 } trkVnsStatsVnsDiscUnforwardFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of virtual network packets discarded by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded." ::= { trkVnsStatsOperEntry 2 } trkVnsStatsVnsOctetFromIf OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of virtual network bytes received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded." ::= { trkVnsStatsOperEntry 3 } trkVnsStatsPktBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkVnsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of Virtual Network packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkVnsStats 377 } trkVnsStatsPktBpEntry OBJECT-TYPE SYNTAX TrkVnsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkVnsStatsPktBpTable." INDEX { trkIndex, trkVnsStatsIndex, trkVnsStatsPktBpEpIndex, trkVnsStatsPktBpDpIndex } ::= { trkVnsStatsPktBpTable 1 } TrkVnsStatsPktBpEntry ::= SEQUENCE { trkVnsStatsPktBpEpIndex INTEGER, trkVnsStatsPktBpDpIndex INTEGER, trkVnsStatsPktBpValue PassportCounter64 } trkVnsStatsPktBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkVnsStatsPktBpTable." ::= { trkVnsStatsPktBpEntry 1 } trkVnsStatsPktBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkVnsStatsPktBpTable." ::= { trkVnsStatsPktBpEntry 2 } trkVnsStatsPktBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkVnsStatsPktBpTable." ::= { trkVnsStatsPktBpEntry 3 } trkVnsStatsDiscBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkVnsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of Virtual Network packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkVnsStats 378 } trkVnsStatsDiscBpEntry OBJECT-TYPE SYNTAX TrkVnsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkVnsStatsDiscBpTable." INDEX { trkIndex, trkVnsStatsIndex, trkVnsStatsDiscBpEpIndex, trkVnsStatsDiscBpDpIndex } ::= { trkVnsStatsDiscBpTable 1 } TrkVnsStatsDiscBpEntry ::= SEQUENCE { trkVnsStatsDiscBpEpIndex INTEGER, trkVnsStatsDiscBpDpIndex INTEGER, trkVnsStatsDiscBpValue PassportCounter64 } trkVnsStatsDiscBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkVnsStatsDiscBpTable." ::= { trkVnsStatsDiscBpEntry 1 } trkVnsStatsDiscBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkVnsStatsDiscBpTable." ::= { trkVnsStatsDiscBpEntry 2 } trkVnsStatsDiscBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkVnsStatsDiscBpTable." ::= { trkVnsStatsDiscBpEntry 3 } trkVnsStatsOctBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkVnsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of Virtual Network octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkVnsStats 379 } trkVnsStatsOctBpEntry OBJECT-TYPE SYNTAX TrkVnsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkVnsStatsOctBpTable." INDEX { trkIndex, trkVnsStatsIndex, trkVnsStatsOctBpEpIndex, trkVnsStatsOctBpDpIndex } ::= { trkVnsStatsOctBpTable 1 } TrkVnsStatsOctBpEntry ::= SEQUENCE { trkVnsStatsOctBpEpIndex INTEGER, trkVnsStatsOctBpDpIndex INTEGER, trkVnsStatsOctBpValue PassportCounter64 } trkVnsStatsOctBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkVnsStatsOctBpTable." ::= { trkVnsStatsOctBpEntry 1 } trkVnsStatsOctBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkVnsStatsOctBpTable." ::= { trkVnsStatsOctBpEntry 2 } trkVnsStatsOctBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkVnsStatsOctBpTable." ::= { trkVnsStatsOctBpEntry 3 } -- Trunk/n DprsStatistics -- This is a dynamic subcomponent of a Trunk which appears when -- DPRS traffic is used over the Trunk. It contains statistics associated -- with packet forwarding traffic for Trunks. trkDprsStats OBJECT IDENTIFIER ::= { trk 10 } trkDprsStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkDprsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of trkDprsStats components." ::= { trkDprsStats 1 } trkDprsStatsRowStatusEntry OBJECT-TYPE SYNTAX TrkDprsStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single trkDprsStats component." INDEX { trkIndex, trkDprsStatsIndex } ::= { trkDprsStatsRowStatusTable 1 } TrkDprsStatsRowStatusEntry ::= SEQUENCE { trkDprsStatsRowStatus RowStatus, trkDprsStatsComponentName DisplayString, trkDprsStatsStorageType StorageType, trkDprsStatsIndex NonReplicated } trkDprsStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of trkDprsStats components. These components cannot be added nor deleted." ::= { trkDprsStatsRowStatusEntry 1 } trkDprsStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { trkDprsStatsRowStatusEntry 2 } trkDprsStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the trkDprsStats tables." ::= { trkDprsStatsRowStatusEntry 4 } trkDprsStatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the trkDprsStats tables." ::= { trkDprsStatsRowStatusEntry 10 } trkDprsStatsPktBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkDprsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of DPRS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkDprsStats 374 } trkDprsStatsPktBpEntry OBJECT-TYPE SYNTAX TrkDprsStatsPktBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkDprsStatsPktBpTable." INDEX { trkIndex, trkDprsStatsIndex, trkDprsStatsPktBpEpIndex, trkDprsStatsPktBpDpIndex } ::= { trkDprsStatsPktBpTable 1 } TrkDprsStatsPktBpEntry ::= SEQUENCE { trkDprsStatsPktBpEpIndex INTEGER, trkDprsStatsPktBpDpIndex INTEGER, trkDprsStatsPktBpValue PassportCounter64 } trkDprsStatsPktBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkDprsStatsPktBpTable." ::= { trkDprsStatsPktBpEntry 1 } trkDprsStatsPktBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkDprsStatsPktBpTable." ::= { trkDprsStatsPktBpEntry 2 } trkDprsStatsPktBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkDprsStatsPktBpTable." ::= { trkDprsStatsPktBpEntry 3 } trkDprsStatsDiscBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkDprsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of DPRS packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkDprsStats 375 } trkDprsStatsDiscBpEntry OBJECT-TYPE SYNTAX TrkDprsStatsDiscBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkDprsStatsDiscBpTable." INDEX { trkIndex, trkDprsStatsIndex, trkDprsStatsDiscBpEpIndex, trkDprsStatsDiscBpDpIndex } ::= { trkDprsStatsDiscBpTable 1 } TrkDprsStatsDiscBpEntry ::= SEQUENCE { trkDprsStatsDiscBpEpIndex INTEGER, trkDprsStatsDiscBpDpIndex INTEGER, trkDprsStatsDiscBpValue PassportCounter64 } trkDprsStatsDiscBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkDprsStatsDiscBpTable." ::= { trkDprsStatsDiscBpEntry 1 } trkDprsStatsDiscBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkDprsStatsDiscBpTable." ::= { trkDprsStatsDiscBpEntry 2 } trkDprsStatsDiscBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkDprsStatsDiscBpTable." ::= { trkDprsStatsDiscBpEntry 3 } trkDprsStatsOctBpTable OBJECT-TYPE SYNTAX SEQUENCE OF TrkDprsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of DPRS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded." ::= { trkDprsStats 376 } trkDprsStatsOctBpEntry OBJECT-TYPE SYNTAX TrkDprsStatsOctBpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the trkDprsStatsOctBpTable." INDEX { trkIndex, trkDprsStatsIndex, trkDprsStatsOctBpEpIndex, trkDprsStatsOctBpDpIndex } ::= { trkDprsStatsOctBpTable 1 } TrkDprsStatsOctBpEntry ::= SEQUENCE { trkDprsStatsOctBpEpIndex INTEGER, trkDprsStatsOctBpDpIndex INTEGER, trkDprsStatsOctBpValue PassportCounter64 } trkDprsStatsOctBpEpIndex OBJECT-TYPE SYNTAX INTEGER { ep0(0), ep1(1), ep2(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the trkDprsStatsOctBpTable." ::= { trkDprsStatsOctBpEntry 1 } trkDprsStatsOctBpDpIndex OBJECT-TYPE SYNTAX INTEGER { dp0(0), dp1(1), dp2(2), dp3(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the trkDprsStatsOctBpTable." ::= { trkDprsStatsOctBpEntry 2 } trkDprsStatsOctBpValue OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the trkDprsStatsOctBpTable." ::= { trkDprsStatsOctBpEntry 3 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { trkMeasuredSpeedToIf, -- trkPorsStatsPorsIntOctetFromIf, -- trkMaxTxUnit, -- trkDprsStatsComponentName, -- trkHighSpeedAlarmThreshold, -- trkPorsStatsPorsNormOctetFromIf, -- trkDprsStatsDiscBpValue, -- trkAvailabilityStatus, -- trkStorageType, -- trkPorsStatsPorsNormPktFromIf, -- trkSnmpOperStatus, -- trkDprsStatsOctBpValue, -- trkIfIndex, -- trkVnsStatsVnsDiscUnforwardFromIf, -- trkAlarmStatus, -- trkDiscardTrunkPktToIf, -- trkPorsStatsPktBpValue, -- trkSpdThValue, -- trkExpectedRemoteNodeName, -- trkPorsStatsRowStatus, -- trkUnknownStatus, -- trkStandbyStatus, -- trkIntPktFromIf, -- trkOverrideTransmitSpeed, -- trkOverrideRoundTripUsec, -- trkMeasuredRoundTripDelayUsec, -- trkTrunkPktToIf, -- trkVnsStatsVnsPktFromIf, -- trkStagingAttempts, -- trkFwdStatsComponentName, -- trkFwdStatsFwdOctetFromIf, -- trkRemoteComponentName, -- trkPorsStatsComponentName, -- trkRemoteValidationAction, -- trkPorsStatsPorsNormDiscUnforwardFromIf, -- trkVnsStatsStorageType, -- trkPorsStatsPorsIntDiscUnforwardFromIf, -- trkDiscardUnforward, -- trkAdminState, -- trkPorsStatsPorsIntPktFromIf, -- trkPktBpValue, -- trkPorsStatsOctBpValue, -- trkSpeedReportingHoldOff, -- trkPorsStatsDiscBpValue, -- trkIfAdminStatus, -- trkMaximumExpectedRoundTripDelay, -- trkProceduralStatus, -- trkDprsStatsStorageType, -- trkVnsStatsPktBpValue, -- trkLowSpeedAlarmThreshold, -- trkVnsStatsRowStatus, -- trkFwdStatsStorageType, -- trkSpdThRowStatus, -- trkRowStatus, -- trkUsageState, -- trkDiscardTrunkPktFromIf, -- trkVnsStatsVnsOctetFromIf, -- trkFwdStatsFwdDiscUnforwardFromIf, -- trkComponentName, -- trkFwdStatsFwdPktFromIf, -- trkDiscBpValue, -- trkDprsStatsPktBpValue, -- trkTrunkPktFromIf, -- trkUtilization, -- trkOctBpValue, -- trkVnsStatsComponentName, -- trkOperationalState, -- trkDprsStatsRowStatus, -- trkPktFromIf, -- trkAreYouThereModeEntries, -- trkVnsStatsDiscBpValue, -- trkDiscardIntUnforward, -- trkFwdStatsRowStatus, -- trkControlStatus, -- trkVnsStatsOctBpValue, -- trkIdleTimeOut, -- trkPorsStatsStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." trunksGroup OBJECT IDENTIFIER ::= { trunksMIB 1 } trunksGroupBE OBJECT IDENTIFIER ::= { trunksGroup 5 } trunksGroupBE00 OBJECT IDENTIFIER ::= { trunksGroupBE 1 } trunksGroupBE00A OBJECT IDENTIFIER ::= { trunksGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Trunks." -- STATUS mandatory -- DESCRIPTION "Trunks MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-TrunksMIB -- INCLUDES { trunksGroupBE00A } trunksCapabilities OBJECT IDENTIFIER ::= { trunksMIB 3 } trunksCapabilitiesBE OBJECT IDENTIFIER ::= { trunksCapabilities 5 } trunksCapabilitiesBE00 OBJECT IDENTIFIER ::= { trunksCapabilitiesBE 1 } trunksCapabilitiesBE00A OBJECT IDENTIFIER ::= { trunksCapabilitiesBE00 2 } END