You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Stratacom > CISCO-VISM-SVC-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-VISM-SVC-MIB by vendor Stratacom

CISCO-VISM-SVC-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-VISM-SVC-MIB.


Vendor: Stratacom
Mib: CISCO-VISM-SVC-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-VISM-SVC-MIB 
--   The MIB is for SVC(Switched Virtual Circuit) information for
--   VISM(Voice Interworking Service Module).
--
-- October 2003, George Ogagan
--
-- Copyright (c) 2003 by Cisco Systems, Inc.
-- All rights reserved.
-- ****************************************************************

CISCO-VISM-SVC-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Integer32,
    Counter32
                               FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP               FROM SNMPv2-CONF
    voice                      FROM BASIS-MIB
    ciscoWan                   FROM CISCOWAN-SMI;

ciscoVismSvcMIB MODULE-IDENTITY
    LAST-UPDATED    "200310090000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "       Cisco Systems
                    Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB module containing SVC information for 
        VISM service module."

    REVISION    "200310090000Z"
    DESCRIPTION
        "Initial version of the MIB.

        The content of this MIB was originally available
        in SMIv1 version. The MIB has been converted to
        SMIv2 version and descriptions of some of the objects
        have been modified."
    ::= { ciscoWan 90 }

vismSvcGrp            OBJECT IDENTIFIER ::= { voice 10 }

vismSvcCnfGroups        OBJECT IDENTIFIER ::= { voice 19 }

-- voice SVC signalling QoS parameters
vismSvcAtmQosGrp        OBJECT IDENTIFIER ::= { vismSvcCnfGroups 1 }

-- scaling factor to SVC signalling traffic parameters
vismSvcTrfScalingGrp    OBJECT IDENTIFIER ::= { vismSvcCnfGroups 2 }

--  default AAL2 CID used for single CID AAL2 SVCs
vismSvcAal2CidGrp       OBJECT IDENTIFIER ::= { vismSvcCnfGroups 3 }

vismSvcTxSetups  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Setup messages sent 
        to the PXM(Processor Switch Module) from
        the VISM since VISM reset."
    ::= { vismSvcGrp 1 }
    
vismSvcRxSetups  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Setup messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 2 }
    
vismSvcTxCallProcs  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Call proceeding messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 3 }
    
vismSvcRxCallProcs  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Call proceeding messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 4 }
    
vismSvcTxConns  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Connect messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 5 }
    
vismSvcTxConnAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Connect ack messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 6 }
    
vismSvcRxConns  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Connect messages received
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 7 }
    
vismSvcRxConnAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Connect ack messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 8 }
    
vismSvcTxReleases  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Release messages sent
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 9 }
    
vismSvcTxReleaseCompls  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Release complete messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 10 }
    
vismSvcRxReleases  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Release messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 11 }
    
vismSvcRxReleaseCompls  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Release complete messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 12 }
    
vismSvcTxRestarts  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Restart messages sent to the PXM
        from the VISM since VISM reset."
    ::= { vismSvcGrp 13 }
    
vismSvcTxRestartAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Restart ack messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 14 }
    
vismSvcRxRestarts  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Restart messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 15 }
    
vismSvcRxRestartAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Restart ack messages received
        by the VISM from the PXM since VISM reset."
    ::= { vismSvcGrp 16 }
    
vismSvcTxResyncStrts  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync start messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 17 }
    
vismSvcTxResyncStrtAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync start ack messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 18 }
    
vismSvcRxResyncStrts  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync start messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 19 }
    
vismSvcRxResyncStrtAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync start ack messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 20 }
    
vismSvcTxResyncEnds  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync end messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 21 }
    
vismSvcTxResyncEndAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync end ack messages sent 
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 22 }
    
vismSvcRxResyncEnds  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync end messages received 
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 23 }
    
vismSvcRxResyncEndAcks  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Resync end ack messages received
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 24 }
    
vismSvcTxBulkResyncs  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Bulk resync messages sent
        to the PXM from the VISM since VISM reset."
    ::= { vismSvcGrp 25 }
    
vismSvcRxBulkResyncs  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This is the number of Bulk resync messages received
        by the VISM from the PXM since VISM reset." 
    ::= { vismSvcGrp 26 }
    
vismSvcCallProcExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates the number of times
        the call proceeding timer expired 
        before a connect message is received."
    ::= { vismSvcGrp 27 }
    
vismSvcReleasExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates the number of times
         the release timer expired before a release 
         complete message is received."
    ::= { vismSvcGrp 28 }
    
vismSvcConnExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates the number of times
        the connect timer expired before a
        connection message is received."
    ::= { vismSvcGrp 29 }
    
vismSvcConnAckExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates the number of times the
        connect ack timer expires before a connect
        ack message is received."
    ::= { vismSvcGrp 30 }
    
vismSvcRestartExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicate the number of times the
        restart timer expires before a Restart Response 
        message is received."  
    ::= { vismSvcGrp 31 }
    
vismSvcResyncExpiries  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicate the number of times the
        Resync timer expired a Resync End Indication
        message is received."
    ::= { vismSvcGrp 32 }
    
vismSvcAtmQosCdv OBJECT-TYPE
        SYNTAX          Integer32 (500..20000)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
            "End-to-end cell delay variation used in voice SVC 
             establishment. It is used to guarantee the quality 
             of the route selected for a voice SVC. It is applicable
             to both AAL1 and AAL2 SVC connection establishment. The 
             value specified to this object is in 'micro-seconds'. This 
             value is sent in voice SVC setup messages in extended 
             quality of services information element as the objective value.
            "
        REFERENCE
            "The references are from ATM Forum 'Voice & Telephony over ATM' 
             specifications af-vtoa-0089.000, af-vtoa-0113.000.
            "
        DEFVAL     { 20000 }
        ::= { vismSvcAtmQosGrp 1 }

vismSvcAtmQosCtd OBJECT-TYPE
        SYNTAX          Integer32 (20000..150000)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
            "End-to-end maximum cell transfer delay used in voice 
             SVC establishment. It is used to guarantee the quality 
             of the route selected for a voice SVC. It is applicable 
             to both AAL1 and AAL2 SVC connection establishment. 
             The value specified to this object is in 'micro-seconds'.
             This value is sent in voice SVC setup messages in end-to-end 
             transit delay information element as the objective value.
            "
        REFERENCE
            "The references are from ITU G-Series Recommendations: 
             G.114 - One-way transmission time.
            "
        DEFVAL     { 150000 }
        ::= { vismSvcAtmQosGrp 2 }

vismSvcAtmQosClr OBJECT-TYPE
        SYNTAX        Integer32 (4..8)
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION
            "Maximum Cell Loss Ratio used in voice SVC establishment.
             It is used to guarantee the quality of the route selected for 
             a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection 
             establishment. This value is sent in voice SVC setup messages in 
             extended quality of services information element as maximum cell 
             loss ratio value.
            "
        REFERENCE
            " The references are from BellCore specifications - GR.1110
            "
        DEFVAL     { 8 }
        ::= { vismSvcAtmQosGrp 3 }


vismSvcTrfScalingFactor  OBJECT-TYPE
        SYNTAX          Integer32 (50..200)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
            "Traffic scaling Factor used to compute factored bandwidth which is
             used in ATM signaling to establish voice SVC. When this value is 
             less than 100 it can be referred as a `discount factor' and when 
             more than 100 referred as an `excess factor'
             It is applicable only to VBR SVC connection establishment.
             The traffic scaling is not applicable to AAL2 SVC calls that 
             require G.711 and clear channel codecs
            "
        DEFVAL     { 100 }
        ::= { vismSvcTrfScalingGrp 1 }

vismSvcAal2CidNumber    OBJECT-TYPE
        SYNTAX          Integer32 (8..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
            "The default AAL2 Channel IDentification (CID) number 
             used for AAL2 SVC connections.
            "
        REFERENCE
            "The references are from ITU I-Series Recommendations: 
             I.363.2 B-ISDN ATM Adaptation Layer specification: Type 2 AAL.
            "
        DEFVAL     { 100 }
        ::= { vismSvcAal2CidGrp 1 }

-- conformance information

ciscoVismSvcMIBConformance  OBJECT IDENTIFIER ::= { ciscoVismSvcMIB 2 }

ciscoVismSvcMIBGroups       OBJECT IDENTIFIER ::=
                              { ciscoVismSvcMIBConformance 1 }

ciscoVismSvcMIBCompliances  OBJECT IDENTIFIER ::=
                              { ciscoVismSvcMIBConformance 2 }

-- compliance statements

ciscoVismSvcCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for objects related
        to VISM SVC module."
    MODULE  -- this module
        MANDATORY-GROUPS {
            ciscoVismSvcCounterGroup,
            ciscoVismSvcAtmQosGroup,
            ciscoVismSvcTrfScalingGrp,
            ciscoVismSvcAal2CidGrp 
        }
    ::= { ciscoVismSvcMIBCompliances 1 }

ciscoVismSvcCounterGroup OBJECT-GROUP
     OBJECTS {
       vismSvcTxSetups,
       vismSvcRxSetups,
       vismSvcTxCallProcs,
       vismSvcRxCallProcs,
       vismSvcTxConns,
       vismSvcTxConnAcks,
       vismSvcRxConns,
       vismSvcRxConnAcks,
       vismSvcTxReleases,
       vismSvcTxReleaseCompls,
       vismSvcRxReleases,
       vismSvcRxReleaseCompls,
       vismSvcTxRestarts,
       vismSvcTxRestartAcks,
       vismSvcRxRestarts,
       vismSvcRxRestartAcks,
       vismSvcTxResyncStrts,
       vismSvcTxResyncStrtAcks,
       vismSvcRxResyncStrts,
       vismSvcRxResyncStrtAcks,
       vismSvcTxResyncEnds,
       vismSvcTxResyncEndAcks,
       vismSvcRxResyncEnds,
       vismSvcRxResyncEndAcks,
       vismSvcTxBulkResyncs,
       vismSvcRxBulkResyncs,
       vismSvcCallProcExpiries,
       vismSvcReleasExpiries,
       vismSvcConnExpiries,
       vismSvcConnAckExpiries,
       vismSvcRestartExpiries,
       vismSvcResyncExpiries    
     }
     STATUS current
     DESCRIPTION
          "The collection of objects which are used to represent
          VISM SVC counters."
      ::= { ciscoVismSvcMIBGroups 1 }

ciscoVismSvcAtmQosGroup OBJECT-GROUP
     OBJECTS {
        vismSvcAtmQosCdv,
        vismSvcAtmQosCtd,
        vismSvcAtmQosClr
     }
     STATUS current
     DESCRIPTION
          "The collection of objects which are used to represent 
          VISM SVC Signaling and QOS parameters."
      ::= { ciscoVismSvcMIBGroups 2 }

ciscoVismSvcTrfScalingGrp OBJECT-GROUP
     OBJECTS {
      vismSvcTrfScalingFactor
     }
     STATUS current
     DESCRIPTION
          "This object is are used to represent VISM 
           scaling factor to SVC Signaling traffic parameter."
      ::= { ciscoVismSvcMIBGroups 3 }

ciscoVismSvcAal2CidGrp OBJECT-GROUP
     OBJECTS {
      vismSvcAal2CidNumber
     }
     STATUS current
     DESCRIPTION
          "This object is used to represent
          VISM SVC AAL2 Cid."
      ::= { ciscoVismSvcMIBGroups 4 }

END