Wellfleet-APPN-MIB Wellfleet-APPN-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:36:03 EDT 1995 IMPORTS Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfAppnGroup FROM Wellfleet-COMMON-MIB; wfAppnNode OBJECT IDENTIFIER ::= { wfAppnGroup 1 } wfAppnNodeInfoAndCaps OBJECT IDENTIFIER ::= { wfAppnNode 1 } wfAppnNn OBJECT IDENTIFIER ::= { wfAppnGroup 2 } wfAppnNnTopology OBJECT IDENTIFIER ::= { wfAppnNn 3 } wfAppnLocalTopology OBJECT IDENTIFIER ::= { wfAppnGroup 3 } wfAppnLocalThisNode OBJECT IDENTIFIER ::= { wfAppnLocalTopology 1 } wfAppnDirectory OBJECT IDENTIFIER ::= { wfAppnGroup 4 } wfAppnCos OBJECT IDENTIFIER ::= { wfAppnGroup 5 } wfAppnTps OBJECT IDENTIFIER ::= { wfAppnGroup 6 } wfAppnDlu OBJECT IDENTIFIER ::= { wfAppnGroup 7 } wfAppnNodeDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the APPN Node." DEFVAL { created } ::= { wfAppnNodeInfoAndCaps 1 } wfAppnNodeDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the APPN Node." DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 2 } wfAppnNodeState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the APPN CP." DEFVAL { notpresent } ::= { wfAppnNodeInfoAndCaps 3 } wfAppnNodeCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Administratively-assigned network name for this node in the format NETID.CPNAME." ::= { wfAppnNodeInfoAndCaps 4 } wfAppnNodeNetid OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully-qualified control point name." ::= { wfAppnNodeInfoAndCaps 5 } wfAppnNodeBlockNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product." ::= { wfAppnNodeInfoAndCaps 6 } wfAppnNodeIdNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number from the node_id. This node_id is used to identify the local node and is included in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area." ::= { wfAppnNodeInfoAndCaps 7 } wfAppnNodeType OBJECT-TYPE SYNTAX INTEGER { nn(1), en(2), len(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node, either Network Node, End Node, or Low Entry Networking Node. This node is always a Network Node." ::= { wfAppnNodeInfoAndCaps 8 } wfAppnNodeUpTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time (in hundredths of a second) since this APPN node was initialized." ::= { wfAppnNodeInfoAndCaps 9 } wfAppnNodeNegotLs OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports negotiable link stations." ::= { wfAppnNodeInfoAndCaps 10 } wfAppnNodeSegReasm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported." ::= { wfAppnNodeInfoAndCaps 11 } wfAppnNodeBindReasm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported." ::= { wfAppnNodeInfoAndCaps 12 } wfAppnNodeParallelTg OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports parallel TGs." ::= { wfAppnNodeInfoAndCaps 13 } wfAppnNodeService OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node allows call-in from nodes not defined locally." ::= { wfAppnNodeInfoAndCaps 14 } wfAppnNodeAdaptiveBindPacing OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports adaptive bind pacing." ::= { wfAppnNodeInfoAndCaps 15 } wfAppnNodeNnRcvRegChar OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports receiving registered characteristics." ::= { wfAppnNodeInfoAndCaps 16 } wfAppnNodeNnGateway OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this is a gateway node." ::= { wfAppnNodeInfoAndCaps 17 } wfAppnNodeNnCentralDirectory OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports central directory cache." ::= { wfAppnNodeInfoAndCaps 18 } wfAppnNodeNnTreeCache OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports Route Tree caching." ::= { wfAppnNodeInfoAndCaps 19 } wfAppnNodeNnTreeUpdate OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported." ::= { wfAppnNodeInfoAndCaps 20 } wfAppnNodeNnRouteAddResist OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing." DEFVAL { 128 } ::= { wfAppnNodeInfoAndCaps 21 } wfAppnNodeNnIsr OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing." ::= { wfAppnNodeInfoAndCaps 22 } wfAppnNodeNnFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes." ::= { wfAppnNodeInfoAndCaps 23 } wfAppnNodeModeToCosDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Mode to Cos mapping is supported" ::= { wfAppnNodeInfoAndCaps 24 } wfAppnNodeMdsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables Multiple Domain Support" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 25 } wfAppnNodeRegWithCdsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable Registration of Local and Domain resources with Central Directory Server" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 26 } wfAppnNodeAlertQSize OBJECT-TYPE SYNTAX INTEGER(2..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Size of the MDS Send Alert Queue Size" DEFVAL { 10 } ::= { wfAppnNodeInfoAndCaps 27 } wfAppnNodeCosCacheSize OBJECT-TYPE SYNTAX INTEGER(8..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Size of the COS Database weights cache This should be set to the number of COSs defined" DEFVAL { 8 } ::= { wfAppnNodeInfoAndCaps 28 } wfAppnNodeStoreEndpointRscvsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Store RSCVs for Endpoint sessions?" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 29 } wfAppnNodeNnMaxLocates OBJECT-TYPE SYNTAX INTEGER(8..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum simultaneous Locates that this node will process" DEFVAL { 256 } ::= { wfAppnNodeInfoAndCaps 30 } wfAppnNodeNnDirCacheSize OBJECT-TYPE SYNTAX INTEGER { def(100) } ACCESS read-write STATUS mandatory DESCRIPTION "Maximum size (entry count) of the Directory Services cache." DEFVAL { def } ::= { wfAppnNodeInfoAndCaps 31 } wfAppnNodeNnMaxDirEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Number of entries in Directory Database. A value of zero means unlimited" ::= { wfAppnNodeInfoAndCaps 32 } wfAppnNodeNnLocateTimeout OBJECT-TYPE SYNTAX INTEGER { def(60) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies a time (in seconds) before a network search will timeout. A value of zero means no timeout" DEFVAL { def } ::= { wfAppnNodeInfoAndCaps 33 } wfAppnNodeNnTreeCacheSize OBJECT-TYPE SYNTAX INTEGER(8..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Size of the Topology Database routing tree cache." DEFVAL { 8 } ::= { wfAppnNodeInfoAndCaps 34 } wfAppnNodeNnTreeCacheUseLimit OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Number of times a cached Routing Tree will be used before it is recalculated" DEFVAL { 8 } ::= { wfAppnNodeInfoAndCaps 35 } wfAppnNodeNnMaxTdmNodes OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of nodes in the topology database. A value of zero means unlimited" ::= { wfAppnNodeInfoAndCaps 36 } wfAppnNodeNnMaxTdmTgs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of TGs in the topology database. A value of zero means unlimited" ::= { wfAppnNodeInfoAndCaps 37 } wfAppnNodeNnMaxIsrSessions OBJECT-TYPE SYNTAX INTEGER(100..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of Intermediate Sessions that this node will route" DEFVAL { 1000 } ::= { wfAppnNodeInfoAndCaps 38 } wfAppnNodeNnIsrSessionUpperThresh OBJECT-TYPE SYNTAX INTEGER { def(900) } ACCESS read-write STATUS mandatory DESCRIPTION "ISR Session Threshold at which the node is considered congested. This value must be less than that of wfAppnNodeNnMaxIsrSessions" DEFVAL { def } ::= { wfAppnNodeInfoAndCaps 39 } wfAppnNodeNnIsrSessionLowerThresh OBJECT-TYPE SYNTAX INTEGER { def(800) } ACCESS read-write STATUS mandatory DESCRIPTION "ISR Session Threshold at which the node is no longer considered congested. This value must be less than that of wfAppnNodeNnIsrSessionUpperThresh" DEFVAL { def } ::= { wfAppnNodeInfoAndCaps 40 } wfAppnNodeNnIsrMaxRuSize OBJECT-TYPE SYNTAX INTEGER(256..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum RU size supported for intermediate sessions" DEFVAL { 4096 } ::= { wfAppnNodeInfoAndCaps 41 } wfAppnNodeNnIsrRcvPacingWindow OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "Receive Pacing window for intermediate sessions" DEFVAL { 7 } ::= { wfAppnNodeInfoAndCaps 42 } wfAppnNodeNnStoreIsrRscvsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Store RSCVs for intermediate sessions? (for network monitoring)" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 43 } wfAppnNodeNnStoreDlurRscvsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Store RSCVs for DLUR sessions? (for network monitoring)" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 44 } wfAppnNodeNnDlurDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This enables DLUR support for the Node" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 45 } wfAppnNodeTotalAvailableMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total memory available to APPN" ::= { wfAppnNodeInfoAndCaps 46 } wfAppnNodeInUseMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory in use by APPN" ::= { wfAppnNodeInfoAndCaps 47 } wfAppnNodeMemoryWarningThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Warning memory threshold" ::= { wfAppnNodeInfoAndCaps 48 } wfAppnNodeMemoryCriticalThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Critical memory threshold" ::= { wfAppnNodeInfoAndCaps 49 } wfAppnNodeHprDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This enables HPR support for the Node" DEFVAL { enable } ::= { wfAppnNodeInfoAndCaps 50 } wfAppnNodeHprPathSwitchCtrlrDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This enables HPR Path Switch Controller support for the Node" DEFVAL { disable } ::= { wfAppnNodeInfoAndCaps 51 } wfAppnNodeDebugIpsTraceDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This enables tracing of internal messages for debugging" DEFVAL { disable } ::= { wfAppnNodeInfoAndCaps 52 } wfAppnNodeDebugIpsTraceSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the size of the IPS trace file for debugging" DEFVAL { 50000 } ::= { wfAppnNodeInfoAndCaps 53 } wfAppnNodeDefaultDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Fully-qualified name of the default primary DLUS node." ::= { wfAppnNodeInfoAndCaps 54 } wfAppnNodeDefaultBackupDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Fully-qualified name of the default backup DLUS node." ::= { wfAppnNodeInfoAndCaps 55 } wfAppnNodePdLogDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This enables logging of problem determination messages" DEFVAL { disable } ::= { wfAppnNodeInfoAndCaps 56 } wfAppnNodeDlusRetryTimeout OBJECT-TYPE SYNTAX INTEGER(5..90) ACCESS read-write STATUS mandatory DESCRIPTION "This controls the timeout between retying pipe to the DLUS" DEFVAL { 10 } ::= { wfAppnNodeInfoAndCaps 57 } wfAppnNodeDlusRetryLimit OBJECT-TYPE SYNTAX INTEGER(10..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This controls the nubmer of retries for the pipe to teh DLUS; 65535 means forever" DEFVAL { 65535 } ::= { wfAppnNodeInfoAndCaps 58 } wfAppnNodeDlcTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeDlcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "this table contains entries for each DLC configured for APPN use" ::= { wfAppnNode 2 } wfAppnNodeDlcEntry OBJECT-TYPE SYNTAX WfAppnNodeDlcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodeDlcTable." INDEX { wfAppnNodeDlcName } ::= { wfAppnNodeDlcTable 1 } WfAppnNodeDlcEntry ::= SEQUENCE { wfAppnNodeDlcDelete INTEGER, wfAppnNodeDlcDisable INTEGER, wfAppnNodeDlcName DisplayString, wfAppnNodeDlcState INTEGER, wfAppnNodeDlcType INTEGER, wfAppnNodeDlcNegLsSupportDisable INTEGER, wfAppnNodeDlcCct INTEGER, wfAppnNodeDlcData OCTET STRING } wfAppnNodeDlcDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLC definition." DEFVAL { created } ::= { wfAppnNodeDlcEntry 1 } wfAppnNodeDlcDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this DLC." DEFVAL { enable } ::= { wfAppnNodeDlcEntry 2 } wfAppnNodeDlcName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the 8-character name given to this DLC" ::= { wfAppnNodeDlcEntry 3 } wfAppnNodeDlcState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of this DLC." ::= { wfAppnNodeDlcEntry 4 } wfAppnNodeDlcType OBJECT-TYPE SYNTAX INTEGER { sdlc(1), srb(2), tb(3), fr(4), dls(5), qllc(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the type of DLC" DEFVAL { srb } ::= { wfAppnNodeDlcEntry 5 } wfAppnNodeDlcNegLsSupportDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if Link Station roles can be negotiated on this DLC" DEFVAL { enable } ::= { wfAppnNodeDlcEntry 6 } wfAppnNodeDlcCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the circuit used by this DLC" ::= { wfAppnNodeDlcEntry 7 } wfAppnNodeDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "comment - Is this used? -P2" ::= { wfAppnNodeDlcEntry 8 } wfAppnNodePortTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "this table contains entries for each Port defined" ::= { wfAppnNode 3 } wfAppnNodePortEntry OBJECT-TYPE SYNTAX WfAppnNodePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Port Name is used as the index to this table." INDEX { wfAppnNodePortName } ::= { wfAppnNodePortTable 1 } WfAppnNodePortEntry ::= SEQUENCE { wfAppnNodePortDelete INTEGER, wfAppnNodePortDisable INTEGER, wfAppnNodePortName DisplayString, wfAppnNodePortState INTEGER, wfAppnNodePortDlcType INTEGER, wfAppnNodePortPortType INTEGER, wfAppnNodePortSIMRIM INTEGER, wfAppnNodePortLsRole INTEGER, wfAppnNodePortMaxRcvBtuSize INTEGER, wfAppnNodePortMaxIframeWindow INTEGER, wfAppnNodePortDefLsGoodXids Counter, wfAppnNodePortDefLsBadXids Counter, wfAppnNodePortDynLsGoodXids Counter, wfAppnNodePortDynLsBadXids Counter, wfAppnNodePortDlcName DisplayString, wfAppnNodePortNumber INTEGER, wfAppnNodePortTotLinkActLim INTEGER, wfAppnNodePortInbLinkActLim INTEGER, wfAppnNodePortOutLinkActLim INTEGER, wfAppnNodePortActXidExchangeLimit INTEGER, wfAppnNodePortNonActXidExchangeLimit INTEGER, wfAppnNodePortLsXmitRcvCap INTEGER, wfAppnNodePortTargetPacingCount INTEGER, wfAppnNodePortMaxSendBtuSize INTEGER, wfAppnNodePortImplicitCpSessions INTEGER, wfAppnNodePortImplicitLimResource INTEGER, wfAppnNodePortImplicitEffCap INTEGER, wfAppnNodePortImplicitConnCost INTEGER, wfAppnNodePortImplicitByteCost INTEGER, wfAppnNodePortImplicitSecurity INTEGER, wfAppnNodePortImplicitDelay INTEGER, wfAppnNodePortImplicitUsr1 INTEGER, wfAppnNodePortImplicitUsr2 INTEGER, wfAppnNodePortImplicitUsr3 INTEGER, wfAppnNodePortImplicitHprDisable INTEGER, wfAppnNodePortImplicitHprLlErrorDisable INTEGER, wfAppnNodePortImplicitLinkDeactTime INTEGER, wfAppnNodePortDlcData OCTET STRING, wfAppnNodePortHprDlcData OCTET STRING, wfAppnNodePortImplicitDlurDisable INTEGER } wfAppnNodePortDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Port definition." DEFVAL { created } ::= { wfAppnNodePortEntry 1 } wfAppnNodePortDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Port." DEFVAL { enable } ::= { wfAppnNodePortEntry 2 } wfAppnNodePortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for this APPN port. The name can be from one to eight characters." ::= { wfAppnNodePortEntry 3 } wfAppnNodePortState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of this port." DEFVAL { inactive } ::= { wfAppnNodePortEntry 4 } wfAppnNodePortDlcType OBJECT-TYPE SYNTAX INTEGER { other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenring(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the DLC type of this port." ::= { wfAppnNodePortEntry 5 } wfAppnNodePortPortType OBJECT-TYPE SYNTAX INTEGER { leased(1), switched(2), fac(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the type of line used by this port." DEFVAL { fac } ::= { wfAppnNodePortEntry 6 } wfAppnNodePortSIMRIM OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported." ::= { wfAppnNodePortEntry 7 } wfAppnNodePortLsRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), negot(3), abm(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode." DEFVAL { negot } ::= { wfAppnNodePortEntry 8 } wfAppnNodePortMaxRcvBtuSize OBJECT-TYPE SYNTAX INTEGER(256..4105) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Basic Transmission Size (BTU) that a link station on this port can receive." DEFVAL { 1500 } ::= { wfAppnNodePortEntry 9 } wfAppnNodePortMaxIframeWindow OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received." DEFVAL { 7 } ::= { wfAppnNodePortEntry 10 } wfAppnNodePortDefLsGoodXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XIDs that have occurred on all defined link stations on this port since the last time this port was started." ::= { wfAppnNodePortEntry 11 } wfAppnNodePortDefLsBadXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XIDs that have occurred on all defined link stations on this port since the last time this port was started." ::= { wfAppnNodePortEntry 12 } wfAppnNodePortDynLsGoodXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started." ::= { wfAppnNodePortEntry 13 } wfAppnNodePortDynLsBadXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started." ::= { wfAppnNodePortEntry 14 } wfAppnNodePortDlcName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is the 8-character name of the DLC which supports this Port" ::= { wfAppnNodePortEntry 15 } wfAppnNodePortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is a unique number for this Port on the DLC" ::= { wfAppnNodePortEntry 16 } wfAppnNodePortTotLinkActLim OBJECT-TYPE SYNTAX INTEGER { neg(1), pri(256) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum link activation limit for this Port. The maximum value depends on the LS Role and Port Type, as follows: Port Type LS Role Max Act Lim Inb Out Switched 1 1 1 Leased Secondary 1 1 0 Leased Negotiable 1 0 0 Leased Primary 256 0 256 SATF 256 128 128" DEFVAL { pri } ::= { wfAppnNodePortEntry 17 } wfAppnNodePortInbLinkActLim OBJECT-TYPE SYNTAX INTEGER { sec(1), satf(128) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum inbound link activation limit for this Port. This value plus next one must total less than or equal to the total link activation limit." DEFVAL { satf } ::= { wfAppnNodePortEntry 18 } wfAppnNodePortOutLinkActLim OBJECT-TYPE SYNTAX INTEGER { switched(1), satf(128), pri(256) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equal to the total link activation limit." DEFVAL { satf } ::= { wfAppnNodePortEntry 19 } wfAppnNodePortActXidExchangeLimit OBJECT-TYPE SYNTAX INTEGER { def(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum number of activation XIDs which will be sent before the Port is considered inoperable" DEFVAL { def } ::= { wfAppnNodePortEntry 20 } wfAppnNodePortNonActXidExchangeLimit OBJECT-TYPE SYNTAX INTEGER { def(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum number of non-activation XIDs which will be sent before the Port is considered inoperable" DEFVAL { def } ::= { wfAppnNodePortEntry 21 } wfAppnNodePortLsXmitRcvCap OBJECT-TYPE SYNTAX INTEGER { tws(1), twa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if the Port can receive Two-Way Simultaneous or Two-Way Alternate" DEFVAL { tws } ::= { wfAppnNodePortEntry 22 } wfAppnNodePortTargetPacingCount OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the target pacing count for BINDs on this Port" DEFVAL { 32 } ::= { wfAppnNodePortEntry 23 } wfAppnNodePortMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER(256..4105) ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the Maximum BTU Size which can be sent out this Port" DEFVAL { 1500 } ::= { wfAppnNodePortEntry 24 } wfAppnNodePortImplicitCpSessions OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies whether CP-CP sessions are permitted with implicit link stations on this Port" DEFVAL { yes } ::= { wfAppnNodePortEntry 25 } wfAppnNodePortImplicitLimResource OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies whether implicit link stations on this Port should be defined as limited resources" DEFVAL { no } ::= { wfAppnNodePortEntry 26 } wfAppnNodePortImplicitEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with TGs to implicit link stations on this Port. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnNodePortEntry 27 } wfAppnNodePortImplicitConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 128 } ::= { wfAppnNodePortEntry 28 } wfAppnNodePortImplicitByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 128 } ::= { wfAppnNodePortEntry 29 } wfAppnNodePortImplicitSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 1 } ::= { wfAppnNodePortEntry 30 } wfAppnNodePortImplicitDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value for use with TGs to implicit link stations on this Port. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNodePortEntry 31 } wfAppnNodePortImplicitUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 128 } ::= { wfAppnNodePortEntry 32 } wfAppnNodePortImplicitUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 128 } ::= { wfAppnNodePortEntry 33 } wfAppnNodePortImplicitUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port." DEFVAL { 128 } ::= { wfAppnNodePortEntry 34 } wfAppnNodePortImplicitHprDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if HPR can be used with implicit link stations on this Port" DEFVAL { enable } ::= { wfAppnNodePortEntry 35 } wfAppnNodePortImplicitHprLlErrorDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if Link-Level Error recovery is to be used on implicit link stations which support HPR on this Port. NOTE: This field does not enable/disable HPRs selective retransmission algorithm. HPR will perform selective retransmission on data whether or not error recovery is also done by the link level protocol." DEFVAL { disable } ::= { wfAppnNodePortEntry 36 } wfAppnNodePortImplicitLinkDeactTime OBJECT-TYPE SYNTAX INTEGER(5..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the time in seconds before implicit Link Stations on this Port will be deactivated if it is an HPR limited Resource." DEFVAL { 120 } ::= { wfAppnNodePortEntry 37 } wfAppnNodePortDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the local DLC address to be used by this port" ::= { wfAppnNodePortEntry 38 } wfAppnNodePortHprDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the HPR address to be used by this port" DEFVAL { 'c8'h } ::= { wfAppnNodePortEntry 39 } wfAppnNodePortImplicitDlurDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if HPR can be used with implicit link stations on this Port" DEFVAL { disable } ::= { wfAppnNodePortEntry 40 } wfAppnNodeLsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains detail information about link station configuration" ::= { wfAppnNode 4 } wfAppnNodeLsEntry OBJECT-TYPE SYNTAX WfAppnNodeLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodePortTable. This table is indexed by the link station name" INDEX { wfAppnNodeLsName } ::= { wfAppnNodeLsTable 1 } WfAppnNodeLsEntry ::= SEQUENCE { wfAppnNodeLsDelete INTEGER, wfAppnNodeLsDisable INTEGER, wfAppnNodeLsName DisplayString, wfAppnNodeLsPortName DisplayString, wfAppnNodeLsState INTEGER, wfAppnNodeLsCpName DisplayString, wfAppnNodeLsTgNum INTEGER, wfAppnNodeLsLimResource INTEGER, wfAppnNodeLsMigration INTEGER, wfAppnNodeLsBlockNum DisplayString, wfAppnNodeLsIdNum DisplayString, wfAppnNodeLsCpCpSession INTEGER, wfAppnNodeLsTargetPacingCount INTEGER, wfAppnNodeLsMaxSendBtuSize INTEGER, wfAppnNodeLsEffCap INTEGER, wfAppnNodeLsConnCost INTEGER, wfAppnNodeLsByteCost INTEGER, wfAppnNodeLsSecurity INTEGER, wfAppnNodeLsDelay INTEGER, wfAppnNodeLsUsr1 INTEGER, wfAppnNodeLsUsr2 INTEGER, wfAppnNodeLsUsr3 INTEGER, wfAppnNodeLsCpType INTEGER, wfAppnNodeLsAutoActivateDisable INTEGER, wfAppnNodeLsSolicitSscpSessionsDisable INTEGER, wfAppnNodeLsUseDefaultTgChars INTEGER, wfAppnNodeLsLinkData OCTET STRING, wfAppnNodeLsDlurDisable INTEGER, wfAppnNodeLsDspuName DisplayString, wfAppnNodeLsDlusName DisplayString, wfAppnNodeLsBackupDlusName DisplayString, wfAppnNodeLsHprDisable INTEGER, wfAppnNodeLsHprLlErrorDisable INTEGER, wfAppnNodeLsLinkDeactTime INTEGER, wfAppnNodeLsLinkRetryCount INTEGER } wfAppnNodeLsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Link Station definition." DEFVAL { created } ::= { wfAppnNodeLsEntry 1 } wfAppnNodeLsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Link Station." DEFVAL { enable } ::= { wfAppnNodeLsEntry 2 } wfAppnNodeLsName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for the link station. The name can be from one to eight characters." ::= { wfAppnNodeLsEntry 3 } wfAppnNodeLsPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Administratively-assigned name for the port. The name can be from one to eight characters." ::= { wfAppnNodeLsEntry 4 } wfAppnNodeLsState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this link station." DEFVAL { inactive } ::= { wfAppnNodeLsEntry 5 } wfAppnNodeLsCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname." ::= { wfAppnNodeLsEntry 6 } wfAppnNodeLsTgNum OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Number associated with the TG to this link station. Range ( 1 - 20) Predefined values for auto-activation" DEFVAL { 1 } ::= { wfAppnNodeLsEntry 7 } wfAppnNodeLsLimResource OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions." DEFVAL { no } ::= { wfAppnNodeLsEntry 8 } wfAppnNodeLsMigration OBJECT-TYPE SYNTAX INTEGER { xid0(1), uplevel(2), xid3(3), noxid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID0 protocols. 2 Indicates that this is an up-level node supporting XID3 protocols including the Network Name CV 3 Indicates that this is a back-level node supporting XID3 protocols (but does not include the Network Name CV) 4 Indicates that this is a back-level node which does not support XID protocols. (This is valid on NONSWITCHED ports, and is not valid on negotiable ports." DEFVAL { uplevel } ::= { wfAppnNodeLsEntry 9 } wfAppnNodeLsBlockNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable." ::= { wfAppnNodeLsEntry 10 } wfAppnNodeLsIdNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area." ::= { wfAppnNodeLsEntry 11 } wfAppnNodeLsCpCpSession OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported by this link station." DEFVAL { yes } ::= { wfAppnNodeLsEntry 12 } wfAppnNodeLsTargetPacingCount OBJECT-TYPE SYNTAX INTEGER(0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed." DEFVAL { 4 } ::= { wfAppnNodeLsEntry 13 } wfAppnNodeLsMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER(0..4105) ACCESS read-write STATUS mandatory DESCRIPTION "Numeric value between 0 and 4105 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value." DEFVAL { 1500 } ::= { wfAppnNodeLsEntry 14 } wfAppnNodeLsEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnNodeLsEntry 15 } wfAppnNodeLsConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeLsEntry 16 } wfAppnNodeLsByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeLsEntry 17 } wfAppnNodeLsSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 1 } ::= { wfAppnNodeLsEntry 18 } wfAppnNodeLsDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG using this link station. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNodeLsEntry 19 } wfAppnNodeLsUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeLsEntry 20 } wfAppnNodeLsUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeLsEntry 21 } wfAppnNodeLsUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeLsEntry 22 } wfAppnNodeLsCpType OBJECT-TYPE SYNTAX INTEGER { learn(1), nn(2), en(3), bllen(4), hostxid3(5), hostxid0(6), dspuxid(7), dspunoxid(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the APPN Node type of Link Station." DEFVAL { learn } ::= { wfAppnNodeLsEntry 23 } wfAppnNodeLsAutoActivateDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if the link should be automatically activated when the Port becomes active. Should be disabled if CP-CP sessions are enabled." DEFVAL { disable } ::= { wfAppnNodeLsEntry 24 } wfAppnNodeLsSolicitSscpSessionsDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if SSCP Sessions should be solicited from this Link Station" DEFVAL { disable } ::= { wfAppnNodeLsEntry 25 } wfAppnNodeLsUseDefaultTgChars OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the default TG characteristics specified for the Port should be used for this link station, or if explicit TG characteristics will be supplied." DEFVAL { yes } ::= { wfAppnNodeLsEntry 26 } wfAppnNodeLsLinkData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "this for Link Address (MAC/SAP, SDLC Address)" ::= { wfAppnNodeLsEntry 27 } wfAppnNodeLsDlurDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if the adjacent Link Station is a node to be serviced by DLUR." DEFVAL { disable } ::= { wfAppnNodeLsEntry 28 } wfAppnNodeLsDspuName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "8-byte name of the downstream PU supported by DLUR." ::= { wfAppnNodeLsEntry 29 } wfAppnNodeLsDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Fully-qualified name of the DLUS node which will serve this DLUR Link Station." ::= { wfAppnNodeLsEntry 30 } wfAppnNodeLsBackupDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Fully-qualified name of the backup DLUS node which may serve this DLUR Link Station." ::= { wfAppnNodeLsEntry 31 } wfAppnNodeLsHprDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if HPR is supported on this Link Station" DEFVAL { disable } ::= { wfAppnNodeLsEntry 32 } wfAppnNodeLsHprLlErrorDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies if Link-Level Error recovery is to be used on this link station. NOTE: This field does not enable/disable HPRs selective retransmission algorithm. HPR will perform selective retransmission on data whether or not error recovery is also done by the link level protocol." DEFVAL { disable } ::= { wfAppnNodeLsEntry 33 } wfAppnNodeLsLinkDeactTime OBJECT-TYPE SYNTAX INTEGER(5..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the time in seconds before this Link Station will be deactivated if it is an HPR limited Resource." DEFVAL { 120 } ::= { wfAppnNodeLsEntry 34 } wfAppnNodeLsLinkRetryCount OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS mandatory DESCRIPTION "This indicates for how many times will APPN CP component retry to restart the link station before it gives up, 99 default is forever." DEFVAL { 99 } ::= { wfAppnNodeLsEntry 35 } wfAppnNodeLsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeLsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains detailed status information about link stations" ::= { wfAppnNode 5 } wfAppnNodeLsStatusEntry OBJECT-TYPE SYNTAX WfAppnNodeLsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodeLsStatusTable. This table is indexed by the link station name" INDEX { wfAppnNodeLsStatusName } ::= { wfAppnNodeLsStatusTable 1 } WfAppnNodeLsStatusEntry ::= SEQUENCE { wfAppnNodeLsStatusName DisplayString, wfAppnNodeLsStatusPortName DisplayString, wfAppnNodeLsStatusDlcType INTEGER, wfAppnNodeLsStatusDynamic INTEGER, wfAppnNodeLsStatusState INTEGER, wfAppnNodeLsStatusCpName DisplayString, wfAppnNodeLsStatusTgNum INTEGER, wfAppnNodeLsStatusLimResource INTEGER, wfAppnNodeLsStatusMigration INTEGER, wfAppnNodeLsStatusBlockNum DisplayString, wfAppnNodeLsStatusIdNum DisplayString, wfAppnNodeLsStatusCpCpSession INTEGER, wfAppnNodeLsStatusTargetPacingCount INTEGER, wfAppnNodeLsStatusMaxSendBtuSize INTEGER, wfAppnNodeLsStatusEffCap INTEGER, wfAppnNodeLsStatusConnCost INTEGER, wfAppnNodeLsStatusByteCost INTEGER, wfAppnNodeLsStatusSecurity INTEGER, wfAppnNodeLsStatusDelay INTEGER, wfAppnNodeLsStatusUsr1 INTEGER, wfAppnNodeLsStatusUsr2 INTEGER, wfAppnNodeLsStatusUsr3 INTEGER, wfAppnNodeLsStatusInXidBytes Counter, wfAppnNodeLsStatusInMsgBytes Counter, wfAppnNodeLsStatusInXidFrames Counter, wfAppnNodeLsStatusInMsgFrames Counter, wfAppnNodeLsStatusOutXidBytes Counter, wfAppnNodeLsStatusOutMsgBytes Counter, wfAppnNodeLsStatusOutXidFrames Counter, wfAppnNodeLsStatusOutMsgFrames Counter, wfAppnNodeLsStatusEchoRsps Counter, wfAppnNodeLsStatusCurrentDelay INTEGER, wfAppnNodeLsStatusMaxDelay INTEGER, wfAppnNodeLsStatusMinDelay INTEGER, wfAppnNodeLsStatusMaxDelayTime INTEGER, wfAppnNodeLsStatusGoodXids Counter, wfAppnNodeLsStatusBadXids Counter, wfAppnNodeLsStatusActiveSessions INTEGER, wfAppnNodeLsStatusInvalidSnaFrames Counter, wfAppnNodeLsStatusInScFrames Counter, wfAppnNodeLsStatusOutScFrames Counter, wfAppnNodeLsStatusCpType INTEGER, wfAppnNodeLsStatusStartTime INTEGER, wfAppnNodeLsStatusStopTime INTEGER, wfAppnNodeLsStatusUpTime INTEGER, wfAppnNodeLsStatusDeactCause INTEGER, wfAppnNodeLsStatusHprSupport INTEGER, wfAppnNodeLsStatusHprLlErrSupport INTEGER, wfAppnNodeLsStatusAnrLabel INTEGER, wfAppnNodeLsStatusLinkData OCTET STRING } wfAppnNodeLsStatusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for the link station. The name can be from one to eight characters." ::= { wfAppnNodeLsStatusEntry 1 } wfAppnNodeLsStatusPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for the port. The name can be from one to eight characters." ::= { wfAppnNodeLsStatusEntry 2 } wfAppnNodeLsStatusDlcType OBJECT-TYPE SYNTAX INTEGER { other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenring(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of DLC interface, distinguished according to the protocol immediately 'below' this layer." ::= { wfAppnNodeLsStatusEntry 3 } wfAppnNodeLsStatusDynamic OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node." ::= { wfAppnNodeLsStatusEntry 4 } wfAppnNodeLsStatusState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this link station." ::= { wfAppnNodeLsStatusEntry 5 } wfAppnNodeLsStatusCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname." ::= { wfAppnNodeLsStatusEntry 6 } wfAppnNodeLsStatusTgNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with the TG to this link station." ::= { wfAppnNodeLsStatusEntry 7 } wfAppnNodeLsStatusLimResource OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions." ::= { wfAppnNodeLsStatusEntry 8 } wfAppnNodeLsStatusMigration OBJECT-TYPE SYNTAX INTEGER { xid0(1), uplevel(2), xid3(3), noxid(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID0 protocols. 2 Indicates that this is an up-level node supporting XID3 protocols including the Network Name CV 3 Indicates that this is a back-level node supporting XID3 protocols (but does not include the Network Name CV) 4 Indicates that this is a back-level node which does not support XID protocols. (This is valid on NONSWITCHED ports, and is not valid on negotiable ports." ::= { wfAppnNodeLsStatusEntry 9 } wfAppnNodeLsStatusBlockNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable." ::= { wfAppnNodeLsStatusEntry 10 } wfAppnNodeLsStatusIdNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area." ::= { wfAppnNodeLsStatusEntry 11 } wfAppnNodeLsStatusCpCpSession OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported by this link station." ::= { wfAppnNodeLsStatusEntry 12 } wfAppnNodeLsStatusTargetPacingCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed." ::= { wfAppnNodeLsStatusEntry 13 } wfAppnNodeLsStatusMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value." ::= { wfAppnNodeLsStatusEntry 14 } wfAppnNodeLsStatusEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." ::= { wfAppnNodeLsStatusEntry 15 } wfAppnNodeLsStatusConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 16 } wfAppnNodeLsStatusByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 17 } wfAppnNodeLsStatusSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 18 } wfAppnNodeLsStatusDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG using this link station. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNodeLsStatusEntry 19 } wfAppnNodeLsStatusUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 20 } wfAppnNodeLsStatusUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 21 } wfAppnNodeLsStatusUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." ::= { wfAppnNodeLsStatusEntry 22 } wfAppnNodeLsStatusInXidBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID bytes received." ::= { wfAppnNodeLsStatusEntry 23 } wfAppnNodeLsStatusInMsgBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) bytes received." ::= { wfAppnNodeLsStatusEntry 24 } wfAppnNodeLsStatusInXidFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID frames received." ::= { wfAppnNodeLsStatusEntry 25 } wfAppnNodeLsStatusInMsgFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) frames received." ::= { wfAppnNodeLsStatusEntry 26 } wfAppnNodeLsStatusOutXidBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID bytes sent." ::= { wfAppnNodeLsStatusEntry 27 } wfAppnNodeLsStatusOutMsgBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) bytes sent." ::= { wfAppnNodeLsStatusEntry 28 } wfAppnNodeLsStatusOutXidFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID frames sent." ::= { wfAppnNodeLsStatusEntry 29 } wfAppnNodeLsStatusOutMsgFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) frames sent." ::= { wfAppnNodeLsStatusEntry 30 } wfAppnNodeLsStatusEchoRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure that actual round trip time, that is the time the test frame is sent until the response is received." ::= { wfAppnNodeLsStatusEntry 31 } wfAppnNodeLsStatusCurrentDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds." ::= { wfAppnNodeLsStatusEntry 32 } wfAppnNodeLsStatusMaxDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds ." ::= { wfAppnNodeLsStatusEntry 33 } wfAppnNodeLsStatusMinDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds." ::= { wfAppnNodeLsStatusEntry 34 } wfAppnNodeLsStatusMaxDelayTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node." ::= { wfAppnNodeLsStatusEntry 35 } wfAppnNodeLsStatusGoodXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XIDs that have occurred on this link station since the time it was started." ::= { wfAppnNodeLsStatusEntry 36 } wfAppnNodeLsStatusBadXids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XIDs that have occurred on this link station since the time it was started." ::= { wfAppnNodeLsStatusEntry 37 } wfAppnNodeLsStatusActiveSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Active Sessions (Endpoint and ISR) using this Link Station." ::= { wfAppnNodeLsStatusEntry 38 } wfAppnNodeLsStatusInvalidSnaFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Invalid SNA Frames received from this Link Station." ::= { wfAppnNodeLsStatusEntry 39 } wfAppnNodeLsStatusInScFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Session Control frames received from this Link Station." ::= { wfAppnNodeLsStatusEntry 40 } wfAppnNodeLsStatusOutScFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Session Control frames sent to the Link Station." ::= { wfAppnNodeLsStatusEntry 41 } wfAppnNodeLsStatusCpType OBJECT-TYPE SYNTAX INTEGER { learn(1), nn(2), en(3), bllen(4), hostxid3(5), hostxid0(6), dspuxid(7), dspunoxid(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the APPN Node type of Link Station" ::= { wfAppnNodeLsStatusEntry 42 } wfAppnNodeLsStatusStartTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time since system startup (in hundreths of seconds) when Link Station was activated." ::= { wfAppnNodeLsStatusEntry 43 } wfAppnNodeLsStatusStopTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time since system startup (in hundreths of seconds) when Link Station was deactivated." ::= { wfAppnNodeLsStatusEntry 44 } wfAppnNodeLsStatusUpTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time (in hundreths of seconds) that this Link Station has been up." ::= { wfAppnNodeLsStatusEntry 45 } wfAppnNodeLsStatusDeactCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Deactivation Cause" ::= { wfAppnNodeLsStatusEntry 46 } wfAppnNodeLsStatusHprSupport OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if HPR is supported by this Link Station" ::= { wfAppnNodeLsStatusEntry 47 } wfAppnNodeLsStatusHprLlErrSupport OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if HPR Link-level Error recovery is supported by this Link Station" ::= { wfAppnNodeLsStatusEntry 48 } wfAppnNodeLsStatusAnrLabel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ANR Label of this Link Station" ::= { wfAppnNodeLsStatusEntry 49 } wfAppnNodeLsStatusLinkData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Link Address, e.g.Mac Address/SAP" ::= { wfAppnNodeLsStatusEntry 50 } wfAppnNodeCnTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeCnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This Table contains entries for each configured Connection Network" ::= { wfAppnNode 6 } wfAppnNodeCnEntry OBJECT-TYPE SYNTAX WfAppnNodeCnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodeCnTable." INDEX { wfAppnNodeCnFqName } ::= { wfAppnNodeCnTable 1 } WfAppnNodeCnEntry ::= SEQUENCE { wfAppnNodeCnDelete INTEGER, wfAppnNodeCnDisable INTEGER, wfAppnNodeCnFqName DisplayString, wfAppnNodeCnState INTEGER, wfAppnNodeCnEffCap INTEGER, wfAppnNodeCnConnCost INTEGER, wfAppnNodeCnByteCost INTEGER, wfAppnNodeCnSecurity INTEGER, wfAppnNodeCnDelay INTEGER, wfAppnNodeCnUsr1 INTEGER, wfAppnNodeCnUsr2 INTEGER, wfAppnNodeCnUsr3 INTEGER } wfAppnNodeCnDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network definition." DEFVAL { created } ::= { wfAppnNodeCnEntry 1 } wfAppnNodeCnDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network." DEFVAL { enable } ::= { wfAppnNodeCnEntry 2 } wfAppnNodeCnFqName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Fully-qualified name of the Connection Network" ::= { wfAppnNodeCnEntry 3 } wfAppnNodeCnState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this connection network." DEFVAL { inactive } ::= { wfAppnNodeCnEntry 4 } wfAppnNodeCnEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this connection network. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnNodeCnEntry 5 } wfAppnNodeCnConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeCnEntry 6 } wfAppnNodeCnByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeCnEntry 7 } wfAppnNodeCnSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 1 } ::= { wfAppnNodeCnEntry 8 } wfAppnNodeCnDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this connection network. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNodeCnEntry 9 } wfAppnNodeCnUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeCnEntry 10 } wfAppnNodeCnUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeCnEntry 11 } wfAppnNodeCnUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station." DEFVAL { 128 } ::= { wfAppnNodeCnEntry 12 } wfAppnNodeCnPortTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeCnPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing an entry for every Port associated with a connection network." ::= { wfAppnNode 7 } wfAppnNodeCnPortEntry OBJECT-TYPE SYNTAX WfAppnNodeCnPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "an entry in wfAppnNodeCnPortTable" INDEX { wfAppnNodeCnPortCnName, wfAppnNodeCnPortPortName } ::= { wfAppnNodeCnPortTable 1 } WfAppnNodeCnPortEntry ::= SEQUENCE { wfAppnNodeCnPortDelete INTEGER, wfAppnNodeCnPortDisable INTEGER, wfAppnNodeCnPortCnName DisplayString, wfAppnNodeCnPortPortName DisplayString, wfAppnNodeCnPortState INTEGER } wfAppnNodeCnPortDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network Port instance." DEFVAL { created } ::= { wfAppnNodeCnPortEntry 1 } wfAppnNodeCnPortDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network Port." DEFVAL { enable } ::= { wfAppnNodeCnPortEntry 2 } wfAppnNodeCnPortCnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The name of the cn." ::= { wfAppnNodeCnPortEntry 3 } wfAppnNodeCnPortPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the port. FIX to READ_ONLY" ::= { wfAppnNodeCnPortEntry 4 } wfAppnNodeCnPortState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this connection network." DEFVAL { inactive } ::= { wfAppnNodeCnPortEntry 5 } wfAppnNodeIsrSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeIsrSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries for every session that is currently being routed by this Node" ::= { wfAppnNode 8 } wfAppnNodeIsrSessionEntry OBJECT-TYPE SYNTAX WfAppnNodeIsrSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The fqpcid is the index for this table." INDEX { wfAppnNodeIsrSessionPcid, wfAppnNodeIsrSessionFqCpName } ::= { wfAppnNodeIsrSessionTable 1 } WfAppnNodeIsrSessionEntry ::= SEQUENCE { wfAppnNodeIsrSessionPcid OCTET STRING, wfAppnNodeIsrSessionFqCpName DisplayString, wfAppnNodeIsrSessionTransPriority INTEGER, wfAppnNodeIsrSessionCos DisplayString, wfAppnNodeIsrSessionLimResource INTEGER, wfAppnNodeIsrSessionRscv OCTET STRING, wfAppnNodeIsrSessionPriSendRuSize INTEGER, wfAppnNodeIsrSessionPriRcvRuSize INTEGER, wfAppnNodeIsrSessionPriMaxSendBtuSize INTEGER, wfAppnNodeIsrSessionPriMaxRcvBtuSize INTEGER, wfAppnNodeIsrSessionPriMaxSendPacing INTEGER, wfAppnNodeIsrSessionPriCurSendPacing INTEGER, wfAppnNodeIsrSessionPriMaxRcvPacing INTEGER, wfAppnNodeIsrSessionPriCurRcvPacing INTEGER, wfAppnNodeIsrSessionPriSendFrames Counter, wfAppnNodeIsrSessionPriSendBytes Counter, wfAppnNodeIsrSessionPriSendFmdFrames Counter, wfAppnNodeIsrSessionPriRcvFrames Counter, wfAppnNodeIsrSessionPriRcvBytes Counter, wfAppnNodeIsrSessionPriRcvFmdFrames Counter, wfAppnNodeIsrSessionPriSidh INTEGER, wfAppnNodeIsrSessionPriSidl INTEGER, wfAppnNodeIsrSessionPriOdai INTEGER, wfAppnNodeIsrSessionPriLsName DisplayString, wfAppnNodeIsrSessionSecSendRuSize INTEGER, wfAppnNodeIsrSessionSecRcvRuSize INTEGER, wfAppnNodeIsrSessionSecMaxSendBtuSize INTEGER, wfAppnNodeIsrSessionSecMaxRcvBtuSize INTEGER, wfAppnNodeIsrSessionSecMaxSendPacing INTEGER, wfAppnNodeIsrSessionSecCurSendPacing INTEGER, wfAppnNodeIsrSessionSecMaxRcvPacing INTEGER, wfAppnNodeIsrSessionSecCurRcvPacing INTEGER, wfAppnNodeIsrSessionSecSendFrames Counter, wfAppnNodeIsrSessionSecSendBytes Counter, wfAppnNodeIsrSessionSecSendFmdFrames Counter, wfAppnNodeIsrSessionSecRcvFrames Counter, wfAppnNodeIsrSessionSecRcvBytes Counter, wfAppnNodeIsrSessionSecRcvFmdFrames Counter, wfAppnNodeIsrSessionSecSidh INTEGER, wfAppnNodeIsrSessionSecSidl INTEGER, wfAppnNodeIsrSessionSecOdai INTEGER, wfAppnNodeIsrSessionSecLsName DisplayString, wfAppnNodeIsrSessionRscvText DisplayString } wfAppnNodeIsrSessionPcid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the PCID of this session" ::= { wfAppnNodeIsrSessionEntry 1 } wfAppnNodeIsrSessionFqCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the Fully-qualified CP name of the node assigning the PCID for this session" ::= { wfAppnNodeIsrSessionEntry 2 } wfAppnNodeIsrSessionTransPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), network(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the transmission priority being used by this session" ::= { wfAppnNodeIsrSessionEntry 3 } wfAppnNodeIsrSessionCos OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Class-of-Service being used by this session" ::= { wfAppnNodeIsrSessionEntry 4 } wfAppnNodeIsrSessionLimResource OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if this session is traversing a Limited Resource" ::= { wfAppnNodeIsrSessionEntry 5 } wfAppnNodeIsrSessionRscv OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the Route Selection Control Vector in use by this session" ::= { wfAppnNodeIsrSessionEntry 6 } wfAppnNodeIsrSessionPriSendRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the send RU size used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 7 } wfAppnNodeIsrSessionPriRcvRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive RU size used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 8 } wfAppnNodeIsrSessionPriMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send BTU size on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 9 } wfAppnNodeIsrSessionPriMaxRcvBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive BTU size on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 10 } wfAppnNodeIsrSessionPriMaxSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send pacing on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 11 } wfAppnNodeIsrSessionPriCurSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current send pacing on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 12 } wfAppnNodeIsrSessionPriMaxRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive pacing on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 13 } wfAppnNodeIsrSessionPriCurRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current receive pacing on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 14 } wfAppnNodeIsrSessionPriSendFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Normal-flow frames sent on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 15 } wfAppnNodeIsrSessionPriSendBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes sent on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 16 } wfAppnNodeIsrSessionPriSendFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames sent on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 17 } wfAppnNodeIsrSessionPriRcvFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Normal-flow frames received on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 18 } wfAppnNodeIsrSessionPriRcvBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes received on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 19 } wfAppnNodeIsrSessionPriRcvFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames received on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 20 } wfAppnNodeIsrSessionPriSidh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SIDH value used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 21 } wfAppnNodeIsrSessionPriSidl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SIDL value used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 22 } wfAppnNodeIsrSessionPriOdai OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODAI value used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 23 } wfAppnNodeIsrSessionPriLsName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the adjacent Link Station used on the primary hop of this session" ::= { wfAppnNodeIsrSessionEntry 24 } wfAppnNodeIsrSessionSecSendRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the send RU size used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 25 } wfAppnNodeIsrSessionSecRcvRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive RU size used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 26 } wfAppnNodeIsrSessionSecMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send BTU size on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 27 } wfAppnNodeIsrSessionSecMaxRcvBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive BTU size on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 28 } wfAppnNodeIsrSessionSecMaxSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send pacing on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 29 } wfAppnNodeIsrSessionSecCurSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current send pacing on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 30 } wfAppnNodeIsrSessionSecMaxRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive pacing on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 31 } wfAppnNodeIsrSessionSecCurRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current receive pacing on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 32 } wfAppnNodeIsrSessionSecSendFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Normal-flow frames sent on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 33 } wfAppnNodeIsrSessionSecSendBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes sent on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 34 } wfAppnNodeIsrSessionSecSendFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames sent on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 35 } wfAppnNodeIsrSessionSecRcvFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Normal-flow frames received on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 36 } wfAppnNodeIsrSessionSecRcvBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes received on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 37 } wfAppnNodeIsrSessionSecRcvFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames received on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 38 } wfAppnNodeIsrSessionSecSidh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SIDH value used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 39 } wfAppnNodeIsrSessionSecSidl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SIDL value used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 40 } wfAppnNodeIsrSessionSecOdai OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODAI value used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 41 } wfAppnNodeIsrSessionSecLsName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the adjacent Link Station used on the secondary hop of this session" ::= { wfAppnNodeIsrSessionEntry 42 } wfAppnNodeIsrSessionRscvText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the Route Selection Control Vector in use by this session, in a DSP_STR format" ::= { wfAppnNodeIsrSessionEntry 43 } wfAppnNodeEndptSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeEndptSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries for every endpoint session that is currently active on this Node" ::= { wfAppnNode 9 } wfAppnNodeEndptSessionEntry OBJECT-TYPE SYNTAX WfAppnNodeEndptSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The fqpcid is the index for this table." INDEX { wfAppnNodeEndptSessionId, wfAppnNodeEndptSessionFqPluName } ::= { wfAppnNodeEndptSessionTable 1 } WfAppnNodeEndptSessionEntry ::= SEQUENCE { wfAppnNodeEndptSessionId OCTET STRING, wfAppnNodeEndptSessionPcid OCTET STRING, wfAppnNodeEndptSessionFqCpName DisplayString, wfAppnNodeEndptSessionFqPluName DisplayString, wfAppnNodeEndptSessionTransPriority INTEGER, wfAppnNodeEndptSessionMode DisplayString, wfAppnNodeEndptSessionCos DisplayString, wfAppnNodeEndptSessionLimResource INTEGER, wfAppnNodeEndptSessionPolarity INTEGER, wfAppnNodeEndptSessionContention INTEGER, wfAppnNodeEndptSessionRscv OCTET STRING, wfAppnNodeEndptSessionSendRuSize INTEGER, wfAppnNodeEndptSessionRcvRuSize INTEGER, wfAppnNodeEndptSessionMaxSendBtuSize INTEGER, wfAppnNodeEndptSessionMaxRcvBtuSize INTEGER, wfAppnNodeEndptSessionMaxSendPacing INTEGER, wfAppnNodeEndptSessionCurSendPacing INTEGER, wfAppnNodeEndptSessionMaxRcvPacing INTEGER, wfAppnNodeEndptSessionCurRcvPacing INTEGER, wfAppnNodeEndptSessionSendFrames Counter, wfAppnNodeEndptSessionSendBytes Counter, wfAppnNodeEndptSessionSendFmdFrames Counter, wfAppnNodeEndptSessionRcvFrames Counter, wfAppnNodeEndptSessionRcvBytes Counter, wfAppnNodeEndptSessionRcvFmdFrames Counter, wfAppnNodeEndptSessionSidh INTEGER, wfAppnNodeEndptSessionSidl INTEGER, wfAppnNodeEndptSessionOdai INTEGER, wfAppnNodeEndptSessionLsName DisplayString, wfAppnNodeEndptSessionRscvText DisplayString } wfAppnNodeEndptSessionId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the session ID of this session" ::= { wfAppnNodeEndptSessionEntry 1 } wfAppnNodeEndptSessionPcid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the PCID of this session" ::= { wfAppnNodeEndptSessionEntry 2 } wfAppnNodeEndptSessionFqCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the Fully-qualified CP name of the node assigning the PCID for this session" ::= { wfAppnNodeEndptSessionEntry 3 } wfAppnNodeEndptSessionFqPluName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the Partner LU being used by this session" ::= { wfAppnNodeEndptSessionEntry 4 } wfAppnNodeEndptSessionTransPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), network(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the transmission priority being used by this session" ::= { wfAppnNodeEndptSessionEntry 5 } wfAppnNodeEndptSessionMode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Mode being used by this session" ::= { wfAppnNodeEndptSessionEntry 6 } wfAppnNodeEndptSessionCos OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Class-of-Service being used by this session" ::= { wfAppnNodeEndptSessionEntry 7 } wfAppnNodeEndptSessionLimResource OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if this session is traversing a Limited Resource" ::= { wfAppnNodeEndptSessionEntry 8 } wfAppnNodeEndptSessionPolarity OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the local LU was the BIND sender (Primary) or if the local LU was the BIND receiver (Secondary)" ::= { wfAppnNodeEndptSessionEntry 9 } wfAppnNodeEndptSessionContention OBJECT-TYPE SYNTAX INTEGER { conwinner(1), conloser(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether this session is a contention-winner or a contention-loser session" ::= { wfAppnNodeEndptSessionEntry 10 } wfAppnNodeEndptSessionRscv OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the Route Selection Control Vector in use by this session" ::= { wfAppnNodeEndptSessionEntry 11 } wfAppnNodeEndptSessionSendRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum RU size sent on this session" ::= { wfAppnNodeEndptSessionEntry 12 } wfAppnNodeEndptSessionRcvRuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum RU size received this session" ::= { wfAppnNodeEndptSessionEntry 13 } wfAppnNodeEndptSessionMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send BTU size for this session" ::= { wfAppnNodeEndptSessionEntry 14 } wfAppnNodeEndptSessionMaxRcvBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive BTU size for this session" ::= { wfAppnNodeEndptSessionEntry 15 } wfAppnNodeEndptSessionMaxSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum send pacing for this session" ::= { wfAppnNodeEndptSessionEntry 16 } wfAppnNodeEndptSessionCurSendPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current send pacing used by this session" ::= { wfAppnNodeEndptSessionEntry 17 } wfAppnNodeEndptSessionMaxRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum receive pacing for this session" ::= { wfAppnNodeEndptSessionEntry 18 } wfAppnNodeEndptSessionCurRcvPacing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current receive pacing used by this session" ::= { wfAppnNodeEndptSessionEntry 19 } wfAppnNodeEndptSessionSendFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of data frames sent by this session" ::= { wfAppnNodeEndptSessionEntry 20 } wfAppnNodeEndptSessionSendBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of data bytes sent by this session" ::= { wfAppnNodeEndptSessionEntry 21 } wfAppnNodeEndptSessionSendFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames sent by this session" ::= { wfAppnNodeEndptSessionEntry 22 } wfAppnNodeEndptSessionRcvFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of data frames received by this session" ::= { wfAppnNodeEndptSessionEntry 23 } wfAppnNodeEndptSessionRcvBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes received by this session" ::= { wfAppnNodeEndptSessionEntry 24 } wfAppnNodeEndptSessionRcvFmdFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of FMD frames received by this session" ::= { wfAppnNodeEndptSessionEntry 25 } wfAppnNodeEndptSessionSidh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes received by this session" ::= { wfAppnNodeEndptSessionEntry 26 } wfAppnNodeEndptSessionSidl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SIDL value used by this session" ::= { wfAppnNodeEndptSessionEntry 27 } wfAppnNodeEndptSessionOdai OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODAI value used by this session" ::= { wfAppnNodeEndptSessionEntry 28 } wfAppnNodeEndptSessionLsName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the adjacent Link Station used by this session" ::= { wfAppnNodeEndptSessionEntry 29 } wfAppnNodeEndptSessionRscvText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is a text string representing the RSCV used by this session" ::= { wfAppnNodeEndptSessionEntry 30 } wfAppnNodeTraceGroup OBJECT IDENTIFIER ::= { wfAppnNode 10 } wfAppnNodeTraceDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Trace." DEFVAL { created } ::= { wfAppnNodeTraceGroup 1 } wfAppnNodeTraceDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Trace." DEFVAL { enable } ::= { wfAppnNodeTraceGroup 2 } wfAppnNodeTraceFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is the path and file name for the Trace file to be created" ::= { wfAppnNodeTraceGroup 3 } wfAppnNodeRtpConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNodeRtpConnectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries for every RTP connection that is currently active on this Node" ::= { wfAppnNode 11 } wfAppnNodeRtpConnectionEntry OBJECT-TYPE SYNTAX WfAppnNodeRtpConnectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The fqpcid is the index for this table." INDEX { wfAppnNodeRtpConnectionName } ::= { wfAppnNodeRtpConnectionTable 1 } WfAppnNodeRtpConnectionEntry ::= SEQUENCE { wfAppnNodeRtpConnectionName DisplayString, wfAppnNodeRtpConnectionDestName DisplayString, wfAppnNodeRtpConnectionFirstHopLsName DisplayString, wfAppnNodeRtpConnectionCosName DisplayString, wfAppnNodeRtpConnectionMaxBtuSize INTEGER, wfAppnNodeRtpConnectionLivenessTimer INTEGER, wfAppnNodeRtpConnectionLivenessTimeouts Counter, wfAppnNodeRtpConnectionLocalTcid OCTET STRING, wfAppnNodeRtpConnectionRemoteTcid OCTET STRING, wfAppnNodeRtpConnectionActiveSessions INTEGER, wfAppnNodeRtpConnectionSendBytes Counter, wfAppnNodeRtpConnectionSendPackets Counter, wfAppnNodeRtpConnectionSendSessionControlFrames Counter, wfAppnNodeRtpConnectionSendRate Gauge, wfAppnNodeRtpConnectionMaxSendRate INTEGER, wfAppnNodeRtpConnectionMinSendRate INTEGER, wfAppnNodeRtpConnectionRcvBytes Counter, wfAppnNodeRtpConnectionRcvPackets Counter, wfAppnNodeRtpConnectionRcvSessionControlFrames Counter, wfAppnNodeRtpConnectionRcvInvalidSnaFrames Counter, wfAppnNodeRtpConnectionRcvRate Gauge, wfAppnNodeRtpConnectionMaxRcvRate INTEGER, wfAppnNodeRtpConnectionMinRcvRate INTEGER, wfAppnNodeRtpConnectionDiscardedBytes Counter, wfAppnNodeRtpConnectionDiscardedPackets Counter, wfAppnNodeRtpConnectionResentBytes Counter, wfAppnNodeRtpConnectionResentPackets Counter, wfAppnNodeRtpConnectionUpTime INTEGER, wfAppnNodeRtpConnectionRoundTripTime INTEGER, wfAppnNodeRtpConnectionSmoothRoundTripTime INTEGER, wfAppnNodeRtpConnectionBurstSize INTEGER, wfAppnNodeRtpConnectionSrtExpiries Counter, wfAppnNodeRtpConnectionShortReqTimer INTEGER, wfAppnNodeRtpConnectionGapsDetected Counter, wfAppnNodeRtpConnectionRscv OCTET STRING, wfAppnNodeRtpConnectionRscvText DisplayString } wfAppnNodeRtpConnectionName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the local name of the RTP connection" ::= { wfAppnNodeRtpConnectionEntry 1 } wfAppnNodeRtpConnectionDestName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the fully-qualified name of the node at the other end of this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 2 } wfAppnNodeRtpConnectionFirstHopLsName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the LS name of the first hop for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 3 } wfAppnNodeRtpConnectionCosName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the Class-of-Service name for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 4 } wfAppnNodeRtpConnectionMaxBtuSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum size (in bytes) of packets which can be carried by this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 5 } wfAppnNodeRtpConnectionLivenessTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Liveness Timer (in seconds) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 6 } wfAppnNodeRtpConnectionLivenessTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number Liveness Timeouts for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 7 } wfAppnNodeRtpConnectionLocalTcid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the Local TCID for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 8 } wfAppnNodeRtpConnectionRemoteTcid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the remote TCID for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 9 } wfAppnNodeRtpConnectionActiveSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of sessions currently active on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 10 } wfAppnNodeRtpConnectionSendBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes that have been sent on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 11 } wfAppnNodeRtpConnectionSendPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of packets that have been sent on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 12 } wfAppnNodeRtpConnectionSendSessionControlFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Session Control that have been sent on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 13 } wfAppnNodeRtpConnectionSendRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This is the current sending rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 14 } wfAppnNodeRtpConnectionMaxSendRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Maximum sending rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 15 } wfAppnNodeRtpConnectionMinSendRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Minimum sending rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 16 } wfAppnNodeRtpConnectionRcvBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes that have been received on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 17 } wfAppnNodeRtpConnectionRcvPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of packets that have been received on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 18 } wfAppnNodeRtpConnectionRcvSessionControlFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Session Control that have been received on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 19 } wfAppnNodeRtpConnectionRcvInvalidSnaFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of invalid SNA frames that have been received on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 20 } wfAppnNodeRtpConnectionRcvRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This is the current receiving rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 21 } wfAppnNodeRtpConnectionMaxRcvRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Maximum receive rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 22 } wfAppnNodeRtpConnectionMinRcvRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Minimum receive rate (in Kbits per second) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 23 } wfAppnNodeRtpConnectionDiscardedBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes that have been discarded on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 24 } wfAppnNodeRtpConnectionDiscardedPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of packets that have been discarded on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 25 } wfAppnNodeRtpConnectionResentBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bytes that have been retransmitted this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 26 } wfAppnNodeRtpConnectionResentPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of packets that have been retransmitted this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 27 } wfAppnNodeRtpConnectionUpTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the time (in seconds) that this RTP connection has been active" ::= { wfAppnNodeRtpConnectionEntry 28 } wfAppnNodeRtpConnectionRoundTripTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the last round-trip time (in milliseconds) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 29 } wfAppnNodeRtpConnectionSmoothRoundTripTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the smoothed round-trip time (in milliseconds) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 30 } wfAppnNodeRtpConnectionBurstSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current burst size for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 31 } wfAppnNodeRtpConnectionSrtExpiries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times the SR Timer has expired on this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 32 } wfAppnNodeRtpConnectionShortReqTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the SHORT_REQ timer duration (in seconds) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 33 } wfAppnNodeRtpConnectionGapsDetected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of gaps detected for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 34 } wfAppnNodeRtpConnectionRscv OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the RSCV (in hex) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 35 } wfAppnNodeRtpConnectionRscvText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the RSCV (in a human-readable format) for this RTP connection" ::= { wfAppnNodeRtpConnectionEntry 36 } wfAppnNnTopo OBJECT IDENTIFIER ::= { wfAppnNn 1 } wfAppnNnTopoMaxNodes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of end nodes and network nodes. If the number of nodes exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node." ::= { wfAppnNnTopo 1 } wfAppnNnTopoCurNumNodes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is issued." ::= { wfAppnNnTopo 2 } wfAppnNnTopoInTdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of TDUs received from all adjacent NN since last initialization." ::= { wfAppnNnTopo 3 } wfAppnNnTopoOutTdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of TDUs built by this node to be sent to all adjacent NN since last initialization." ::= { wfAppnNnTopo 4 } wfAppnNnTopoNodeLowRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the adjacent node that sent this low RSN." ::= { wfAppnNnTopo 5 } wfAppnNnTopoNodeEqualRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs." ::= { wfAppnNnTopo 6 } wfAppnNnTopoNodeGoodHighRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. It is not required to send a TDU to the sender of this update because that node already has the update." ::= { wfAppnNnTopo 7 } wfAppnNnTopoNodeBadHighRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes." ::= { wfAppnNnTopo 8 } wfAppnNnTopoNodeStateUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes." ::= { wfAppnNnTopo 9 } wfAppnNnTopoNodeErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs." ::= { wfAppnNnTopo 10 } wfAppnNnTopoNodeTimerUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database." ::= { wfAppnNnTopo 11 } wfAppnNnTopoNodePurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants kept in the network topology." ::= { wfAppnNnTopo 12 } wfAppnNnTopoTgLowRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the sender of the low RSN." ::= { wfAppnNnTopo 13 } wfAppnNnTopoTgEqualRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs." ::= { wfAppnNnTopo 14 } wfAppnNnTopoTgGoodHighRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting the update to all adjacent network nodes." ::= { wfAppnNnTopo 15 } wfAppnNnTopoTgBadHighRsns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes." ::= { wfAppnNnTopo 16 } wfAppnNnTopoTgStateUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes." ::= { wfAppnNnTopo 17 } wfAppnNnTopoTgErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs." ::= { wfAppnNnTopo 18 } wfAppnNnTopoTgTimerUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database." ::= { wfAppnNnTopo 19 } wfAppnNnTopoTgPurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants to keep in the network topology." ::= { wfAppnNnTopo 20 } wfAppnNnTopoTotalRouteCalcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of routes calculated for all class of services since the last initialization." ::= { wfAppnNnTopo 21 } wfAppnNnTopoTotalRouteRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of route requests for all class of services that could not be calculated since last initialization." ::= { wfAppnNnTopo 22 } wfAppnNnAdjNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNnAdjNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing an entry for every adjacent node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge that indicates the number of outstanding TDUs." ::= { wfAppnNn 2 } wfAppnNnAdjNodeEntry OBJECT-TYPE SYNTAX WfAppnNnAdjNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The adjacent node name is the index for this table." INDEX { wfAppnNnAdjNodeAdjName } ::= { wfAppnNnAdjNodeTable 1 } WfAppnNnAdjNodeEntry ::= SEQUENCE { wfAppnNnAdjNodeAdjName DisplayString, wfAppnNnAdjNodeCpCpSessStatus INTEGER, wfAppnNnAdjNodeOutOfSeqTdus Gauge, wfAppnNnAdjNodeLastFrsnSent INTEGER, wfAppnNnAdjNodeLastFrsnRcvd INTEGER } wfAppnNnAdjNodeAdjName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An administratively-assigned fully-qualified name of this node's adjacent network node." ::= { wfAppnNnAdjNodeEntry 1 } wfAppnNnAdjNodeCpCpSessStatus OBJECT-TYPE SYNTAX INTEGER { active(1), loser(2), winner(3), inactive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are active using both the ConWinner and ConLoser sessions. The session initiated by this node is referred to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoserr session is initiated by the adjacent node and is used by this node to receive from the adjacent node." DEFVAL { inactive } ::= { wfAppnNnAdjNodeEntry 2 } wfAppnNnAdjNodeOutOfSeqTdus OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment." ::= { wfAppnNnAdjNodeEntry 3 } wfAppnNnAdjNodeLastFrsnSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node." ::= { wfAppnNnAdjNodeEntry 4 } wfAppnNnAdjNodeLastFrsnRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node." ::= { wfAppnNnAdjNodeEntry 5 } wfAppnNnTopologyTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNnTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node." ::= { wfAppnNnTopology 1 } wfAppnNnTopologyEntry OBJECT-TYPE SYNTAX WfAppnNnTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The fully-qualified node name is used to index this table." INDEX { wfAppnNnNodeName } ::= { wfAppnNnTopologyTable 1 } WfAppnNnTopologyEntry ::= SEQUENCE { wfAppnNnNodeName DisplayString, wfAppnNnNodeFrsn INTEGER, wfAppnNnNodeEntryTimeLeft INTEGER, wfAppnNnNodeType INTEGER, wfAppnNnNodeRsn INTEGER, wfAppnNnNodeRouteAddResist INTEGER, wfAppnNnNodeCongested INTEGER, wfAppnNnNodeIsrDepleted INTEGER, wfAppnNnNodeEndptDepleted INTEGER, wfAppnNnNodeQuiescing INTEGER, wfAppnNnNodeGateway INTEGER, wfAppnNnNodeCentralDirectory INTEGER, wfAppnNnNodeIsr INTEGER, wfAppnNnNodeChainSupport INTEGER, wfAppnNnNodeHprBase INTEGER, wfAppnNnNodeRtpTower INTEGER } wfAppnNnNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME." ::= { wfAppnNnTopologyEntry 1 } wfAppnNnNodeFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node." ::= { wfAppnNnTopologyEntry 2 } wfAppnNnNodeEntryTimeLeft OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node entry. Range is 0-31." ::= { wfAppnNnTopologyEntry 3 } wfAppnNnNodeType OBJECT-TYPE SYNTAX INTEGER { nn(1), vn(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node." ::= { wfAppnNnTopologyEntry 4 } wfAppnNnNodeRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred." ::= { wfAppnNnTopologyEntry 5 } wfAppnNnNodeRouteAddResist OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing." ::= { wfAppnNnTopologyEntry 6 } wfAppnNnNodeCongested OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists." ::= { wfAppnNnTopologyEntry 7 } wfAppnNnNodeIsrDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted." ::= { wfAppnNnTopologyEntry 8 } wfAppnNnNodeEndptDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether session endpoint resources are depleted." ::= { wfAppnNnTopologyEntry 9 } wfAppnNnNodeQuiescing OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing." ::= { wfAppnNnTopologyEntry 10 } wfAppnNnNodeGateway OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node provide gateway functions." ::= { wfAppnNnTopologyEntry 11 } wfAppnNnNodeCentralDirectory OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is central directory." ::= { wfAppnNnTopologyEntry 12 } wfAppnNnNodeIsr OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing (ISR)." ::= { wfAppnNnTopologyEntry 13 } wfAppnNnNodeChainSupport OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports chaining." ::= { wfAppnNnTopologyEntry 14 } wfAppnNnNodeHprBase OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports HPR base functionality." ::= { wfAppnNnTopologyEntry 15 } wfAppnNnNodeRtpTower OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports RTP tower functionality." ::= { wfAppnNnTopologyEntry 16 } wfAppnNnTgTopologyTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNnTgTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes." ::= { wfAppnNnTopology 2 } wfAppnNnTgTopologyEntry OBJECT-TYPE SYNTAX WfAppnNnTgTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number." INDEX { wfAppnNnTgOwner, wfAppnNnTgDest, wfAppnNnTgNum } ::= { wfAppnNnTgTopologyTable 1 } WfAppnNnTgTopologyEntry ::= SEQUENCE { wfAppnNnTgOwner DisplayString, wfAppnNnTgDest DisplayString, wfAppnNnTgNum INTEGER, wfAppnNnTgFrsn INTEGER, wfAppnNnTgEntryTimeLeft INTEGER, wfAppnNnTgDestVirtual INTEGER, wfAppnNnTgDlcData OCTET STRING, wfAppnNnTgRsn INTEGER, wfAppnNnTgOperational INTEGER, wfAppnNnTgQuiescing INTEGER, wfAppnNnTgCpCpSession INTEGER, wfAppnNnTgEffCap INTEGER, wfAppnNnTgConnCost INTEGER, wfAppnNnTgByteCost INTEGER, wfAppnNnTgSecurity INTEGER, wfAppnNnTgDelay INTEGER, wfAppnNnTgModemClass INTEGER, wfAppnNnTgUsr1 INTEGER, wfAppnNnTgUsr2 INTEGER, wfAppnNnTgUsr3 INTEGER, wfAppnNnTgHprBase INTEGER, wfAppnNnTgRtpTower INTEGER } wfAppnNnTgOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table." ::= { wfAppnNnTgTopologyEntry 1 } wfAppnNnTgDest OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned fully-qualified network name for the destination node for this TG." ::= { wfAppnNnTgTopologyEntry 2 } wfAppnNnTgNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with this transmission group. Range is 0-255." ::= { wfAppnNnTgTopologyEntry 3 } wfAppnNnTgFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node." ::= { wfAppnNnTgTopologyEntry 4 } wfAppnNnTgEntryTimeLeft OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node TG entry. Range is 0-31." ::= { wfAppnNnTgTopologyEntry 5 } wfAppnNnTgDestVirtual OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node is a virtual node." ::= { wfAppnNnTgTopologyEntry 6 } wfAppnNnTgDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits." ::= { wfAppnNnTgTopologyEntry 7 } wfAppnNnTgRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current owning node's resource sequence number for this resource." ::= { wfAppnNnTgTopologyEntry 8 } wfAppnNnTgOperational OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational." ::= { wfAppnNnTgTopologyEntry 9 } wfAppnNnTgQuiescing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is quiescing." ::= { wfAppnNnTgTopologyEntry 10 } wfAppnNnTgCpCpSession OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG." ::= { wfAppnNnTgTopologyEntry 11 } wfAppnNnTgEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." ::= { wfAppnNnTgTopologyEntry 12 } wfAppnNnTgConnCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 13 } wfAppnNnTgByteCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 14 } wfAppnNnTgSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 15 } wfAppnNnTgDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNnTgTopologyEntry 16 } wfAppnNnTgModemClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'." ::= { wfAppnNnTgTopologyEntry 17 } wfAppnNnTgUsr1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 18 } wfAppnNnTgUsr2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 19 } wfAppnNnTgUsr3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyEntry 20 } wfAppnNnTgHprBase OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether HPR base functionality is supported on this TG." ::= { wfAppnNnTgTopologyEntry 21 } wfAppnNnTgRtpTower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether RTP Tower functionality is supported on this TG." ::= { wfAppnNnTgTopologyEntry 22 } wfAppnNnTopologyFRTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNnTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node." ::= { wfAppnNnTopology 3 } wfAppnNnTopologyFREntry OBJECT-TYPE SYNTAX WfAppnNnTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The fully-qualified node name is used to index this table." INDEX { wfAppnNnNodeFRFrsn, wfAppnNnNodeFRName } ::= { wfAppnNnTopologyFRTable 1 } WfAppnNnTopologyFREntry ::= SEQUENCE { wfAppnNnNodeFRName DisplayString, wfAppnNnNodeFRFrsn INTEGER, wfAppnNnNodeFREntryTimeLeft INTEGER, wfAppnNnNodeFRType INTEGER, wfAppnNnNodeFRRsn INTEGER, wfAppnNnNodeFRRouteAddResist INTEGER, wfAppnNnNodeFRCongested INTEGER, wfAppnNnNodeFRIsrDepleted INTEGER, wfAppnNnNodeFREndptDepleted INTEGER, wfAppnNnNodeFRQuiescing INTEGER, wfAppnNnNodeFRGateway INTEGER, wfAppnNnNodeFRCentralDirectory INTEGER, wfAppnNnNodeFRIsr INTEGER, wfAppnNnNodeFRChainSupport INTEGER, wfAppnNnNodeFRHprBase INTEGER, wfAppnNnNodeFRRtpTower INTEGER } wfAppnNnNodeFRName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME." ::= { wfAppnNnTopologyFREntry 1 } wfAppnNnNodeFRFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node." ::= { wfAppnNnTopologyFREntry 2 } wfAppnNnNodeFREntryTimeLeft OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node entry. Range is 0-31." ::= { wfAppnNnTopologyFREntry 3 } wfAppnNnNodeFRType OBJECT-TYPE SYNTAX INTEGER { nn(1), vn(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node." ::= { wfAppnNnTopologyFREntry 4 } wfAppnNnNodeFRRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred." ::= { wfAppnNnTopologyFREntry 5 } wfAppnNnNodeFRRouteAddResist OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing." ::= { wfAppnNnTopologyFREntry 6 } wfAppnNnNodeFRCongested OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists." ::= { wfAppnNnTopologyFREntry 7 } wfAppnNnNodeFRIsrDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted." ::= { wfAppnNnTopologyFREntry 8 } wfAppnNnNodeFREndptDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether session endpoint resources are depleted." ::= { wfAppnNnTopologyFREntry 9 } wfAppnNnNodeFRQuiescing OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing." ::= { wfAppnNnTopologyFREntry 10 } wfAppnNnNodeFRGateway OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node provide gateway functions." ::= { wfAppnNnTopologyFREntry 11 } wfAppnNnNodeFRCentralDirectory OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is central directory." ::= { wfAppnNnTopologyFREntry 12 } wfAppnNnNodeFRIsr OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing (ISR)." ::= { wfAppnNnTopologyFREntry 13 } wfAppnNnNodeFRChainSupport OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports chaining." ::= { wfAppnNnTopologyFREntry 14 } wfAppnNnNodeFRHprBase OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports HPR base functionality." ::= { wfAppnNnTopologyFREntry 15 } wfAppnNnNodeFRRtpTower OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports RTP tower functionality." ::= { wfAppnNnTopologyFREntry 16 } wfAppnNnTgTopologyFRTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnNnTgTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries which describes the TGs associated with the Network Nodes in the network" ::= { wfAppnNnTopology 4 } wfAppnNnTgTopologyFREntry OBJECT-TYPE SYNTAX WfAppnNnTgTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table requires four indexes to provide a unique index. The indexes are the FRSN, the owning or originating CPname, the destination CPname, and the TG number." INDEX { wfAppnNnTgFRFrsn, wfAppnNnTgFROwner, wfAppnNnTgFRDest, wfAppnNnTgFRNum } ::= { wfAppnNnTgTopologyFRTable 1 } WfAppnNnTgTopologyFREntry ::= SEQUENCE { wfAppnNnTgFROwner DisplayString, wfAppnNnTgFRDest DisplayString, wfAppnNnTgFRNum INTEGER, wfAppnNnTgFRFrsn INTEGER, wfAppnNnTgFREntryTimeLeft INTEGER, wfAppnNnTgFRDestVirtual INTEGER, wfAppnNnTgFRDlcData OCTET STRING, wfAppnNnTgFRRsn INTEGER, wfAppnNnTgFROperational INTEGER, wfAppnNnTgFRQuiescing INTEGER, wfAppnNnTgFRCpCpSession INTEGER, wfAppnNnTgFREffCap INTEGER, wfAppnNnTgFRConnCost INTEGER, wfAppnNnTgFRByteCost INTEGER, wfAppnNnTgFRSecurity INTEGER, wfAppnNnTgFRDelay INTEGER, wfAppnNnTgFRModemClass INTEGER, wfAppnNnTgFRUsr1 INTEGER, wfAppnNnTgFRUsr2 INTEGER, wfAppnNnTgFRUsr3 INTEGER, wfAppnNnTgFRHprBase INTEGER, wfAppnNnTgFRRtpTower INTEGER } wfAppnNnTgFROwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table." ::= { wfAppnNnTgTopologyFREntry 1 } wfAppnNnTgFRDest OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned fully-qualified network name for the destination node for this TG." ::= { wfAppnNnTgTopologyFREntry 2 } wfAppnNnTgFRNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with this transmission group. Range is 0-255." ::= { wfAppnNnTgTopologyFREntry 3 } wfAppnNnTgFRFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node." ::= { wfAppnNnTgTopologyFREntry 4 } wfAppnNnTgFREntryTimeLeft OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node TG entry. Range is 0-31." ::= { wfAppnNnTgTopologyFREntry 5 } wfAppnNnTgFRDestVirtual OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node is a virtual node." ::= { wfAppnNnTgTopologyFREntry 6 } wfAppnNnTgFRDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits." ::= { wfAppnNnTgTopologyFREntry 7 } wfAppnNnTgFRRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current owning node's resource sequence number for this resource." ::= { wfAppnNnTgTopologyFREntry 8 } wfAppnNnTgFROperational OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational." ::= { wfAppnNnTgTopologyFREntry 9 } wfAppnNnTgFRQuiescing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is quiescing." ::= { wfAppnNnTgTopologyFREntry 10 } wfAppnNnTgFRCpCpSession OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG." ::= { wfAppnNnTgTopologyFREntry 11 } wfAppnNnTgFREffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." ::= { wfAppnNnTgTopologyFREntry 12 } wfAppnNnTgFRConnCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 13 } wfAppnNnTgFRByteCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 14 } wfAppnNnTgFRSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 15 } wfAppnNnTgFRDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnNnTgTopologyFREntry 16 } wfAppnNnTgFRModemClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'." ::= { wfAppnNnTgTopologyFREntry 17 } wfAppnNnTgFRUsr1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 18 } wfAppnNnTgFRUsr2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 19 } wfAppnNnTgFRUsr3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnNnTgTopologyFREntry 20 } wfAppnNnTgFRHprBase OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether HPR base functionality is supported on this TG." ::= { wfAppnNnTgTopologyFREntry 21 } wfAppnNnTgFRRtpTower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether RTP Tower functionality is supported on this TG." ::= { wfAppnNnTgTopologyFREntry 22 } wfAppnLocalInfo OBJECT IDENTIFIER ::= { wfAppnLocalThisNode 1 } wfAppnLocalNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned network name for this node in the format NETID.CPNAME." ::= { wfAppnLocalInfo 1 } wfAppnLocalNodeType OBJECT-TYPE SYNTAX INTEGER { nn(1), en(2), len(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node." ::= { wfAppnLocalInfo 2 } wfAppnLocalNnRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred." ::= { wfAppnLocalInfo 3 } wfAppnLocalNnRouteAddResist OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing." ::= { wfAppnLocalInfo 4 } wfAppnLocalNnCongested OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists." ::= { wfAppnLocalInfo 5 } wfAppnLocalNnIsrDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted." ::= { wfAppnLocalInfo 6 } wfAppnLocalNnEndptDepleted OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether session endpoint resources are depleted." ::= { wfAppnLocalInfo 7 } wfAppnLocalNnQuiescing OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing." ::= { wfAppnLocalInfo 8 } wfAppnLocalNnGateway OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node provide gateway functions." ::= { wfAppnLocalInfo 9 } wfAppnLocalNnCentralDirectory OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is central directory." ::= { wfAppnLocalInfo 10 } wfAppnLocalNnIsr OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing (ISR)." ::= { wfAppnLocalInfo 11 } wfAppnLocalNnChainSupport OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports chaining." ::= { wfAppnLocalInfo 12 } wfAppnLocalNnFrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes." ::= { wfAppnLocalInfo 13 } wfAppnLocalTgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnLocalTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node." ::= { wfAppnLocalThisNode 3 } wfAppnLocalTgEntry OBJECT-TYPE SYNTAX WfAppnLocalTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the destination CPname and the TG number." INDEX { wfAppnLocalTgDest, wfAppnLocalTgNum } ::= { wfAppnLocalTgTable 1 } WfAppnLocalTgEntry ::= SEQUENCE { wfAppnLocalTgDest DisplayString, wfAppnLocalTgNum INTEGER, wfAppnLocalTgDestVirtual INTEGER, wfAppnLocalTgDlcData OCTET STRING, wfAppnLocalTgRsn INTEGER, wfAppnLocalTgOperational INTEGER, wfAppnLocalTgQuiescing INTEGER, wfAppnLocalTgCpCpSession INTEGER, wfAppnLocalTgEffCap INTEGER, wfAppnLocalTgConnCost INTEGER, wfAppnLocalTgByteCost INTEGER, wfAppnLocalTgSecurity INTEGER, wfAppnLocalTgDelay INTEGER, wfAppnLocalTgModemClass INTEGER, wfAppnLocalTgUsr1 INTEGER, wfAppnLocalTgUsr2 INTEGER, wfAppnLocalTgUsr3 INTEGER } wfAppnLocalTgDest OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned fully-qualified network name for the destination node for this TG." ::= { wfAppnLocalTgEntry 1 } wfAppnLocalTgNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with this transmission group. Range is 0-255." ::= { wfAppnLocalTgEntry 2 } wfAppnLocalTgDestVirtual OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node is a virtual node." ::= { wfAppnLocalTgEntry 3 } wfAppnLocalTgDlcData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits." ::= { wfAppnLocalTgEntry 4 } wfAppnLocalTgRsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current owning node's resource sequence number for this resource." ::= { wfAppnLocalTgEntry 5 } wfAppnLocalTgOperational OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational." ::= { wfAppnLocalTgEntry 6 } wfAppnLocalTgQuiescing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is quiescing." ::= { wfAppnLocalTgEntry 7 } wfAppnLocalTgCpCpSession OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG." ::= { wfAppnLocalTgEntry 8 } wfAppnLocalTgEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." ::= { wfAppnLocalTgEntry 9 } wfAppnLocalTgConnCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 10 } wfAppnLocalTgByteCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 11 } wfAppnLocalTgSecurity OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 12 } wfAppnLocalTgDelay OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Relative amount of time that it takes for a signal to travel the length of the logical link, with a range of 0 through 255 with some of the more common values enumerated. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnLocalTgEntry 13 } wfAppnLocalTgModemClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'." ::= { wfAppnLocalTgEntry 14 } wfAppnLocalTgUsr1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 15 } wfAppnLocalTgUsr2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 16 } wfAppnLocalTgUsr3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG." ::= { wfAppnLocalTgEntry 17 } wfAppnDirectoryPerformance OBJECT IDENTIFIER ::= { wfAppnDirectory 1 } wfAppnDirMaxCaches OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of cache entries allowed. This is an administratively assigned value." ::= { wfAppnDirectoryPerformance 1 } wfAppnDirCurCaches OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current number of cache entries." ::= { wfAppnDirectoryPerformance 2 } wfAppnDirCurHomeEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current number of home entries." ::= { wfAppnDirectoryPerformance 3 } wfAppnDirRegEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current number of registered entries." ::= { wfAppnDirectoryPerformance 4 } wfAppnDirInLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed locates received." ::= { wfAppnDirectoryPerformance 5 } wfAppnDirInBcastLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast locates received." ::= { wfAppnDirectoryPerformance 6 } wfAppnDirOutLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed locates sent." ::= { wfAppnDirectoryPerformance 7 } wfAppnDirOutBcastLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast locates sent." ::= { wfAppnDirectoryPerformance 8 } wfAppnDirNotFoundLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed locates returned with a 'not found'." ::= { wfAppnDirectoryPerformance 9 } wfAppnDirNotFoundBcastLocates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast locates returned with a not found." ::= { wfAppnDirectoryPerformance 10 } wfAppnDirLocateOutstands OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered." ::= { wfAppnDirectoryPerformance 11 } wfAppnDirTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing information about all known LUs and TPs." ::= { wfAppnDirectory 2 } wfAppnDirEntry OBJECT-TYPE SYNTAX WfAppnDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the LU name." INDEX { wfAppnDirLuName } ::= { wfAppnDirTable 1 } WfAppnDirEntry ::= SEQUENCE { wfAppnDirLuName DisplayString, wfAppnDirServerName DisplayString, wfAppnDirLuOwnerName DisplayString, wfAppnDirLocation INTEGER, wfAppnDirType INTEGER, wfAppnDirWildCard INTEGER } wfAppnDirLuName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Fully-qualified network LU name in the domain of the serving network node." ::= { wfAppnDirEntry 1 } wfAppnDirServerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned." ::= { wfAppnDirEntry 2 } wfAppnDirLuOwnerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node." ::= { wfAppnDirEntry 3 } wfAppnDirLocation OBJECT-TYPE SYNTAX INTEGER { local(1), domain(2), xdomain(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the location of the LU." ::= { wfAppnDirEntry 4 } wfAppnDirType OBJECT-TYPE SYNTAX INTEGER { home(1), cache(2), registered(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search and the location information has been saved. 3 - Register The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node." ::= { wfAppnDirEntry 5 } wfAppnDirWildCard OBJECT-TYPE SYNTAX INTEGER { other(1), entry(2), partial(3), full(4) } ACCESS read-only STATUS mandatory DESCRIPTION "1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locating this LU. 4 - Full-wildcard means all LUNAMES will be directed to this LU." ::= { wfAppnDirEntry 6 } wfAppnDirDefineTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnDirDefineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "this table contains entries which define Directory entries" ::= { wfAppnDirectory 3 } wfAppnDirDefineEntry OBJECT-TYPE SYNTAX WfAppnDirDefineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnDirDefineTable." INDEX { wfAppnDirDefineResourceName } ::= { wfAppnDirDefineTable 1 } WfAppnDirDefineEntry ::= SEQUENCE { wfAppnDirDefineDelete INTEGER, wfAppnDirDefineDisable INTEGER, wfAppnDirDefineResourceName DisplayString, wfAppnDirDefineResourceType INTEGER, wfAppnDirDefineParentName DisplayString, wfAppnDirDefineParentType INTEGER } wfAppnDirDefineDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Directory Entry instance." DEFVAL { created } ::= { wfAppnDirDefineEntry 1 } wfAppnDirDefineDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Directory Entry." DEFVAL { enable } ::= { wfAppnDirDefineEntry 2 } wfAppnDirDefineResourceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the resource name in the local Directory" ::= { wfAppnDirDefineEntry 3 } wfAppnDirDefineResourceType OBJECT-TYPE SYNTAX INTEGER { lu(1), encp(2), nncp(3), wildcard(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the resource type in the local Directory" DEFVAL { lu } ::= { wfAppnDirDefineEntry 4 } wfAppnDirDefineParentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the name of the parent of the resource, if the resource is an LU" ::= { wfAppnDirDefineEntry 5 } wfAppnDirDefineParentType OBJECT-TYPE SYNTAX INTEGER { encp(2), nncp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the type of the parent of the resource, if the resource is an LU" DEFVAL { nncp } ::= { wfAppnDirDefineEntry 6 } wfAppnCosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnCosModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table representing all of the defined mode names for this node. The table contains the matching COS name." ::= { wfAppnCos 1 } wfAppnCosModeEntry OBJECT-TYPE SYNTAX WfAppnCosModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the Mode Name." INDEX { wfAppnCosModeName } ::= { wfAppnCosModeTable 1 } WfAppnCosModeEntry ::= SEQUENCE { wfAppnCosModeName DisplayString, wfAppnCosModeCosName DisplayString } wfAppnCosModeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for this mode entry." ::= { wfAppnCosModeEntry 1 } wfAppnCosModeCosName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An administratively assigned name for this Class of Service." ::= { wfAppnCosModeEntry 2 } wfAppnCosNameTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnCosNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name." ::= { wfAppnCos 2 } wfAppnCosNameEntry OBJECT-TYPE SYNTAX WfAppnCosNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The COS name is the index to this table." INDEX { wfAppnCosName } ::= { wfAppnCosNameTable 1 } WfAppnCosNameEntry ::= SEQUENCE { wfAppnCosName DisplayString, wfAppnCosTransPriority INTEGER } wfAppnCosName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for this class of service." ::= { wfAppnCosNameEntry 1 } wfAppnCosTransPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), network(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmission priority for this class of service. Values are: Low Medium High Network" DEFVAL { low } ::= { wfAppnCosNameEntry 2 } wfAppnCosNodeRowTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnCosNodeRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all node-row information for all class of service in this node." ::= { wfAppnCos 3 } wfAppnCosNodeRowEntry OBJECT-TYPE SYNTAX WfAppnCosNodeRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The COS name is the first index and a integer is the second index to insure a unique index." INDEX { wfAppnCosNodeRowName, wfAppnCosNodeRowIndex } ::= { wfAppnCosNodeRowTable 1 } WfAppnCosNodeRowEntry ::= SEQUENCE { wfAppnCosNodeRowName DisplayString, wfAppnCosNodeRowIndex INTEGER, wfAppnCosNodeRowWgt INTEGER, wfAppnCosNodeRowResistMin INTEGER, wfAppnCosNodeRowResistMax INTEGER, wfAppnCosNodeRowMinCongestAllow INTEGER, wfAppnCosNodeRowMaxCongestAllow INTEGER } wfAppnCosNodeRowName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for this class of service." ::= { wfAppnCosNodeRowEntry 1 } wfAppnCosNodeRowIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255." ::= { wfAppnCosNodeRowEntry 2 } wfAppnCosNodeRowWgt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Weight to be associated with the nodes that fit the criteria specified by this node row." ::= { wfAppnCosNodeRowEntry 3 } wfAppnCosNodeRowResistMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing." ::= { wfAppnCosNodeRowEntry 4 } wfAppnCosNodeRowResistMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing." ::= { wfAppnCosNodeRowEntry 5 } wfAppnCosNodeRowMinCongestAllow OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used." DEFVAL { yes } ::= { wfAppnCosNodeRowEntry 6 } wfAppnCosNodeRowMaxCongestAllow OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used." DEFVAL { yes } ::= { wfAppnCosNodeRowEntry 7 } wfAppnCosTgRowTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnCosTgRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing all the Tg-row information for all class of service defined in this node." ::= { wfAppnCos 4 } wfAppnCosTgRowEntry OBJECT-TYPE SYNTAX WfAppnCosTgRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The TgRowName and the TgRowIndex are the index for this table." INDEX { wfAppnCosTgRowName, wfAppnCosTgRowIndex } ::= { wfAppnCosTgRowTable 1 } WfAppnCosTgRowEntry ::= SEQUENCE { wfAppnCosTgRowName DisplayString, wfAppnCosTgRowIndex INTEGER, wfAppnCosTgRowWgt INTEGER, wfAppnCosTgRowEffCapMin INTEGER, wfAppnCosTgRowEffCapMax INTEGER, wfAppnCosTgRowConnCostMin INTEGER, wfAppnCosTgRowConnCostMax INTEGER, wfAppnCosTgRowByteCostMin INTEGER, wfAppnCosTgRowByteCostMax INTEGER, wfAppnCosTgRowSecurityMin INTEGER, wfAppnCosTgRowSecurityMax INTEGER, wfAppnCosTgRowDelayMin INTEGER, wfAppnCosTgRowDelayMax INTEGER, wfAppnCosTgRowUsr1Min INTEGER, wfAppnCosTgRowUsr1Max INTEGER, wfAppnCosTgRowUsr2Min INTEGER, wfAppnCosTgRowUsr2Max INTEGER, wfAppnCosTgRowUsr3Min INTEGER, wfAppnCosTgRowUsr3Max INTEGER } wfAppnCosTgRowName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Administratively-assigned name for this class of service." ::= { wfAppnCosTgRowEntry 1 } wfAppnCosTgRowIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of COS name. This same value is used to access the node and TG COS tables." ::= { wfAppnCosTgRowEntry 2 } wfAppnCosTgRowWgt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Weight to be associated with the nodes that fit the criteria specified by this tg-row." ::= { wfAppnCosTgRowEntry 3 } wfAppnCosTgRowEffCapMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255 DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnCosTgRowEntry 4 } wfAppnCosTgRowEffCapMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnCosTgRowEntry 5 } wfAppnCosTgRowConnCostMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255." ::= { wfAppnCosTgRowEntry 6 } wfAppnCosTgRowConnCostMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255." ::= { wfAppnCosTgRowEntry 7 } wfAppnCosTgRowByteCostMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable cost per byte for this Class of Service." ::= { wfAppnCosTgRowEntry 8 } wfAppnCosTgRowByteCostMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable cost per byte for this Class of Service." ::= { wfAppnCosTgRowEntry 9 } wfAppnCosTgRowSecurityMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable security for this Class of Service." ::= { wfAppnCosTgRowEntry 10 } wfAppnCosTgRowSecurityMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable security for this Class of Service." ::= { wfAppnCosTgRowEntry 11 } wfAppnCosTgRowDelayMin OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnCosTgRowEntry 12 } wfAppnCosTgRowDelayMax OBJECT-TYPE SYNTAX INTEGER { negligible(1), terrestrial(2), packet(3), long(4), maximum(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DEVIATION: 6611 MIB, uses units of microseconds." DEFVAL { negligible } ::= { wfAppnCosTgRowEntry 13 } wfAppnCosTgRowUsr1Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 14 } wfAppnCosTgRowUsr1Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 15 } wfAppnCosTgRowUsr2Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 16 } wfAppnCosTgRowUsr2Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 17 } wfAppnCosTgRowUsr3Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 18 } wfAppnCosTgRowUsr3Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user defined characteristic. Range of values is 0-255." ::= { wfAppnCosTgRowEntry 19 } wfAppnTpPingTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnTpPingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each instance of the APING application" ::= { wfAppnTps 1 } wfAppnTpPingEntry OBJECT-TYPE SYNTAX WfAppnTpPingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnTpPingTable." INDEX { wfAppnTpPingIndex } ::= { wfAppnTpPingTable 1 } WfAppnTpPingEntry ::= SEQUENCE { wfAppnTpPingDelete INTEGER, wfAppnTpPingDisable INTEGER, wfAppnTpPingIndex INTEGER, wfAppnTpPingFqPluName DisplayString, wfAppnTpPingDataLength INTEGER, wfAppnTpPingConsecutiveSends INTEGER, wfAppnTpPingEchoDisable INTEGER, wfAppnTpPingIterations INTEGER, wfAppnTpPingPartnerTpName DisplayString, wfAppnTpPingMode DisplayString, wfAppnTpPingState INTEGER, wfAppnTpPingAllocTime INTEGER, wfAppnTpPingMinTime INTEGER, wfAppnTpPingMaxTime INTEGER, wfAppnTpPingAvgTime INTEGER, wfAppnTpPingPartnerVersion DisplayString } wfAppnTpPingDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a APING instance." DEFVAL { created } ::= { wfAppnTpPingEntry 1 } wfAppnTpPingDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APING instance." DEFVAL { enable } ::= { wfAppnTpPingEntry 2 } wfAppnTpPingIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index of the Ping entry" ::= { wfAppnTpPingEntry 3 } wfAppnTpPingFqPluName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is the Fully-Qualified name of the Partner LU running the APINGD TP" ::= { wfAppnTpPingEntry 4 } wfAppnTpPingDataLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the length of the test data to be sent to the LU being PING-ed" DEFVAL { 100 } ::= { wfAppnTpPingEntry 5 } wfAppnTpPingConsecutiveSends OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the number of consecutive sends that will be issued" DEFVAL { 1 } ::= { wfAppnTpPingEntry 6 } wfAppnTpPingEchoDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies whether the Target of the PING will be requested to echo the data" DEFVAL { enable } ::= { wfAppnTpPingEntry 7 } wfAppnTpPingIterations OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the number of times the PING should be repeated" DEFVAL { 2 } ::= { wfAppnTpPingEntry 8 } wfAppnTpPingPartnerTpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the partner TP name to ping. If no name is specified 'APINGD' will be used" ::= { wfAppnTpPingEntry 9 } wfAppnTpPingMode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the mode to be used for this PING" ::= { wfAppnTpPingEntry 10 } wfAppnTpPingState OBJECT-TYPE SYNTAX INTEGER { init(1), started(2), ok(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current state of the PING request" ::= { wfAppnTpPingEntry 11 } wfAppnTpPingAllocTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the time (in milliseconds) it took to allocate the PING conversation" ::= { wfAppnTpPingEntry 12 } wfAppnTpPingMinTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the minimum time (in milliseconds) it took to PING the partner" ::= { wfAppnTpPingEntry 13 } wfAppnTpPingMaxTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the maximum time (in milliseconds) it took to PING the partner" ::= { wfAppnTpPingEntry 14 } wfAppnTpPingAvgTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the average time (in milliseconds) it took to PING the partner" ::= { wfAppnTpPingEntry 15 } wfAppnTpPingPartnerVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the version string returned by the partner" ::= { wfAppnTpPingEntry 16 } wfAppnTpTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnTpTunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries for each APPN Tunnel" ::= { wfAppnTps 3 } wfAppnTpTunnelEntry OBJECT-TYPE SYNTAX WfAppnTpTunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnTpTunnelTable." INDEX { wfAppnTpTunnelCct } ::= { wfAppnTpTunnelTable 1 } WfAppnTpTunnelEntry ::= SEQUENCE { wfAppnTpTunnelDelete INTEGER, wfAppnTpTunnelDisable INTEGER, wfAppnTpTunnelState INTEGER, wfAppnTpTunnelCct INTEGER, wfAppnTpTunnelFqPluName DisplayString, wfAppnTpTunnelModeName DisplayString, wfAppnTpTunnelMedia INTEGER, wfAppnTpTunnelMacAddress OCTET STRING, wfAppnTpTunnelTxFrames Counter, wfAppnTpTunnelRxFrames Counter, wfAppnTpTunnelDropFrames Counter } wfAppnTpTunnelDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an APPN Tunnel instance." DEFVAL { created } ::= { wfAppnTpTunnelEntry 1 } wfAppnTpTunnelDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APPN Tunnel instance." DEFVAL { enable } ::= { wfAppnTpTunnelEntry 2 } wfAppnTpTunnelState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the Tunnel." DEFVAL { notpresent } ::= { wfAppnTpTunnelEntry 3 } wfAppnTpTunnelCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit number of the circuit running over this APPN Tunnel" ::= { wfAppnTpTunnelEntry 4 } wfAppnTpTunnelFqPluName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the Partner LU for this APPN Tunnel" ::= { wfAppnTpTunnelEntry 5 } wfAppnTpTunnelModeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the Mode for this APPN Tunnel" ::= { wfAppnTpTunnelEntry 6 } wfAppnTpTunnelMedia OBJECT-TYPE SYNTAX INTEGER { ring(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the media to be emulated by this tunnel" DEFVAL { ring } ::= { wfAppnTpTunnelEntry 7 } wfAppnTpTunnelMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the local MAC address to be used by this tunnel" ::= { wfAppnTpTunnelEntry 8 } wfAppnTpTunnelTxFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of frames transmitted over this APPN Tunnel" ::= { wfAppnTpTunnelEntry 9 } wfAppnTpTunnelRxFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of frames received over this APPN Tunnel" ::= { wfAppnTpTunnelEntry 10 } wfAppnTpTunnelDropFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of frames dropped by this APPN Tunnel" ::= { wfAppnTpTunnelEntry 11 } wfAppnDlurLuTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnDlurLuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each LU currently being serviced by DLUR" ::= { wfAppnDlu 1 } wfAppnDlurLuEntry OBJECT-TYPE SYNTAX WfAppnDlurLuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnDlurLuTable." INDEX { wfAppnDlurLuName } ::= { wfAppnDlurLuTable 1 } WfAppnDlurLuEntry ::= SEQUENCE { wfAppnDlurLuName DisplayString, wfAppnDlurLuPuName DisplayString, wfAppnDlurLuDlusName DisplayString, wfAppnDlurLuNauAddress INTEGER, wfAppnDlurLuPluName DisplayString, wfAppnDlurLuRscv OCTET STRING, wfAppnDlurLuRscvText DisplayString } wfAppnDlurLuName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the LU" ::= { wfAppnDlurLuEntry 1 } wfAppnDlurLuPuName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the PU associated with the LU" ::= { wfAppnDlurLuEntry 2 } wfAppnDlurLuDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the DLUS node supporting this LU" ::= { wfAppnDlurLuEntry 3 } wfAppnDlurLuNauAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Network Addressable Unit address of this LU" ::= { wfAppnDlurLuEntry 4 } wfAppnDlurLuPluName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the Partner LU" ::= { wfAppnDlurLuEntry 5 } wfAppnDlurLuRscv OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the RSCV being used by this LU session" ::= { wfAppnDlurLuEntry 6 } wfAppnDlurLuRscvText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the RSCV (in a human-readable format) for this DLUR connection" ::= { wfAppnDlurLuEntry 7 } wfAppnDlurPuTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnDlurPuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each PU currently being serviced by DLUR" ::= { wfAppnDlu 2 } wfAppnDlurPuEntry OBJECT-TYPE SYNTAX WfAppnDlurPuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnDlurPuTable." INDEX { wfAppnDlurPuName } ::= { wfAppnDlurPuTable 1 } WfAppnDlurPuEntry ::= SEQUENCE { wfAppnDlurPuName DisplayString, wfAppnDlurPuId OCTET STRING, wfAppnDlurPuDefinedDlusName DisplayString, wfAppnDlurPuBackupDlusName DisplayString, wfAppnDlurPuActiveDlusName DisplayString, wfAppnDlurPuPcid OCTET STRING, wfAppnDlurPuFqCpName DisplayString } wfAppnDlurPuName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the PU" ::= { wfAppnDlurPuEntry 1 } wfAppnDlurPuId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "ID of this PU" ::= { wfAppnDlurPuEntry 2 } wfAppnDlurPuDefinedDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the primary DLUS node defined this PU" ::= { wfAppnDlurPuEntry 3 } wfAppnDlurPuBackupDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the backup DLUS node defined this PU" ::= { wfAppnDlurPuEntry 4 } wfAppnDlurPuActiveDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the name of the DLUS node currently supporting this PU" ::= { wfAppnDlurPuEntry 5 } wfAppnDlurPuPcid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the PCID of the DLUR 'pipe' session" ::= { wfAppnDlurPuEntry 6 } wfAppnDlurPuFqCpName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the Fully-qualified CP name of the node assigning the PCID for the DLUR 'pipe' session" ::= { wfAppnDlurPuEntry 7 } wfAppnDlurDlusTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAppnDlurDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each DLUS known to this DLUR" ::= { wfAppnDlu 3 } wfAppnDlurDlusEntry OBJECT-TYPE SYNTAX WfAppnDlurDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnDlurDlusTable." INDEX { wfAppnDlurDlusName } ::= { wfAppnDlurDlusTable 1 } WfAppnDlurDlusEntry ::= SEQUENCE { wfAppnDlurDlusName DisplayString, wfAppnDlurDlusIsDefault INTEGER, wfAppnDlurDlusIsBackupDefault INTEGER, wfAppnDlurDlusPipeState INTEGER, wfAppnDlurDlusActivePus INTEGER, wfAppnDlurDlusSentReqactpus Counter, wfAppnDlurDlusRcvReqactpuRsps Counter, wfAppnDlurDlusRcvActpus Counter, wfAppnDlurDlusSentActpuRsps Counter, wfAppnDlurDlusSentReqdactpus Counter, wfAppnDlurDlusRcvReqdactpuRsps Counter, wfAppnDlurDlusRcvDactpus Counter, wfAppnDlurDlusSentDactpuRsps Counter, wfAppnDlurDlusRcvActlus Counter, wfAppnDlurDlusSentActluRsps Counter, wfAppnDlurDlusRcvDactlus Counter, wfAppnDlurDlusSentDactluRsps Counter, wfAppnDlurDlusRcvSscpPuMus Counter, wfAppnDlurDlusSentSscpPuMus Counter, wfAppnDlurDlusRcvSscpLuMus Counter, wfAppnDlurDlusSentSscpLuMus Counter } wfAppnDlurDlusName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is the fully-qualified name of the DLUS node" ::= { wfAppnDlurDlusEntry 1 } wfAppnDlurDlusIsDefault OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if the DLUS is the default DLUS" ::= { wfAppnDlurDlusEntry 2 } wfAppnDlurDlusIsBackupDefault OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if the DLUS is the default backup DLUS" ::= { wfAppnDlurDlusEntry 3 } wfAppnDlurDlusPipeState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the state of the DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 4 } wfAppnDlurDlusActivePus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of PUs currently using this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 5 } wfAppnDlurDlusSentReqactpus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of REQACTPUs sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 6 } wfAppnDlurDlusRcvReqactpuRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of REQACTPU responses received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 7 } wfAppnDlurDlusRcvActpus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ACTPUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 8 } wfAppnDlurDlusSentActpuRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ACTPU responses sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 9 } wfAppnDlurDlusSentReqdactpus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of REQDACTPUs sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 10 } wfAppnDlurDlusRcvReqdactpuRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of REQDACTPU responses received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 11 } wfAppnDlurDlusRcvDactpus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of DACTPUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 12 } wfAppnDlurDlusSentDactpuRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of DACTPU responses sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 13 } wfAppnDlurDlusRcvActlus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ACTLUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 14 } wfAppnDlurDlusSentActluRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ACTLU responses sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 15 } wfAppnDlurDlusRcvDactlus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of DACTLUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 16 } wfAppnDlurDlusSentDactluRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of DACTLU responses sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 17 } wfAppnDlurDlusRcvSscpPuMus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of SSCP-PU MUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 18 } wfAppnDlurDlusSentSscpPuMus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of SSCP-PU MUs sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 19 } wfAppnDlurDlusRcvSscpLuMus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of SSCP-LU MUs received over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 20 } wfAppnDlurDlusSentSscpLuMus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of SSCP-LU MUs sent over this DLUR-DLUS pipe" ::= { wfAppnDlurDlusEntry 21 } wfAppnPathSwitch OBJECT IDENTIFIER ::= { wfAppnGroup 8 } wfAppnPathSwitchDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a path switch." DEFVAL { created } ::= { wfAppnPathSwitch 1 } wfAppnPathSwitchDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this path switch." DEFVAL { enable } ::= { wfAppnPathSwitch 2 } wfAppnPathSwitchRtpConnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the RTP connection to path switch" ::= { wfAppnPathSwitch 3 } END -- Wellfleet-APPN-MIB