Wellfleet-PPP-MIB Wellfleet-PPP-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:46:33 EDT 1995 IMPORTS IpAddress, Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfPppGroup FROM Wellfleet-COMMON-MIB; wfPppLineTable OBJECT-TYPE SYNTAX SEQUENCE OF WfPppLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Wellfleet PPP Line Configuration Table containing attributes dealing with the link layer and the Link Control Protocol (LCP)" ::= { wfPppGroup 1 } wfPppLineEntry OBJECT-TYPE SYNTAX WfPppLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet PPP line configuration parameters and counters" INDEX { wfPppLineLineNumber, wfPppLineLLIndex } ::= { wfPppLineTable 1 } WfPppLineEntry ::= SEQUENCE { wfPppLineDelete INTEGER, wfPppLineDisable INTEGER, wfPppLineState INTEGER, wfPppLineLineNumber INTEGER, wfPppLineLLIndex INTEGER, wfPppLineLcpCurrentState INTEGER, wfPppLineRestartTimer INTEGER, wfPppLineEchoRequestFreq INTEGER, wfPppLineEchoReplyLoss INTEGER, wfPppLineMaxConfReq INTEGER, wfPppLineMaxTermReq INTEGER, wfPppLineMaxConfFail INTEGER, wfPppLineMagicNumber Counter, wfPppLineMru INTEGER, wfPppLineLocalAuthProtocol INTEGER, wfPppLineRemoteAuthProtocol INTEGER, wfPppLineLocalPapId DisplayString, wfPppLineLocalPapPassword DisplayString, wfPppLineRemotePapId DisplayString, wfPppLineRemotePapPassword DisplayString, wfPppLineLQProtocol INTEGER, wfPppLineDisableRemoteLQRTimer INTEGER, wfPppLineCfgLQRRptPrd INTEGER, wfPppLineLQRRptPrd INTEGER, wfPppLineCfgInboundQuality INTEGER, wfPppLineInboundQuality INTEGER, wfPppLineCfgOutboundQuality INTEGER, wfPppLineOutboundQuality INTEGER, wfPppLineOutLQRs Counter, wfPppLineInLQRs Counter, wfPppLineChapSecret DisplayString, wfPppLinePapFallbackDisable INTEGER, wfPppLineChapLocalName DisplayString, wfPppLineChapRemoteName DisplayString, wfPppLineChapPeriodicTimer INTEGER, wfPppLineBadPackets Counter, wfPppLineLastBadPacket OCTET STRING, wfPppLineLevelPktsIn Counter, wfPppLineAllowPapReject INTEGER, wfPppLineActiveCct INTEGER, wfPppLineCfgAsyncMap Gauge, wfPppLineActualAsyncMap Gauge, wfPppLineAuthTimer INTEGER, wfPppLineConvergenceTimer INTEGER, wfPppLineMagicNumDisable INTEGER, wfPppLineMyLinkDiscr INTEGER, wfPppLinePeerLinkDiscr INTEGER, wfPppLineCfgMru INTEGER, wfPppLineRfc1661Compliance INTEGER, wfPppLineLqmCurrentState INTEGER } wfPppLineDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfPppLineEntry 1 } wfPppLineDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter -- Generates Open/Close events to the LCP FSM" DEFVAL { enabled } ::= { wfPppLineEntry 2 } wfPppLineState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), loopedback(4), notpresent(20) } ACCESS read-only STATUS mandatory DESCRIPTION "PPP state variable, Not Present, Init, Down, Up" DEFVAL { notpresent } ::= { wfPppLineEntry 3 } wfPppLineLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This is the line number assigned to the driver PPP is running on top of" ::= { wfPppLineEntry 4 } wfPppLineLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This is the lower layer index presented to PPP by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0." ::= { wfPppLineEntry 5 } wfPppLineLcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the LCP Finite State Machine" ::= { wfPppLineEntry 6 } wfPppLineRestartTimer OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "value for Restart timer in seconds" DEFVAL { 3 } ::= { wfPppLineEntry 7 } wfPppLineEchoRequestFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "value for Echo-Request frequency - number of seconds between transmission of Echo-Request packets" ::= { wfPppLineEntry 8 } wfPppLineEchoReplyLoss OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "value for Echo-Reply acceptable loss - number of unacknowledged Echo-Reply packets counted before declaring the link down" DEFVAL { 3 } ::= { wfPppLineEntry 9 } wfPppLineMaxConfReq OBJECT-TYPE SYNTAX INTEGER(0..100000) ACCESS read-write STATUS mandatory DESCRIPTION "value for maximum Configure-Requests - number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak or Configure-Reject before assuming peer is unable to respond" DEFVAL { 10 } ::= { wfPppLineEntry 10 } wfPppLineMaxTermReq OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "value for maximum Terminate-Requests - number of Terminate-Request packets sent without receiving a Terminate-Ack before assuming peer is unable to respond" DEFVAL { 2 } ::= { wfPppLineEntry 11 } wfPppLineMaxConfFail OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "value for maximum configuration failure count - number of Configure-Nak packets sent without sending a Configure-Ack before assuming configuration is unable to converge" DEFVAL { 10 } ::= { wfPppLineEntry 12 } wfPppLineMagicNumber OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the Magic Number being used on this line" ::= { wfPppLineEntry 13 } wfPppLineMru OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "this is the MRU being used on the line (in both directions)" ::= { wfPppLineEntry 14 } wfPppLineLocalAuthProtocol OBJECT-TYPE SYNTAX INTEGER { passauth(49187), chap(49699), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "this is the authorization protocol we require our peer to use on our side of the link" DEFVAL { none } ::= { wfPppLineEntry 15 } wfPppLineRemoteAuthProtocol OBJECT-TYPE SYNTAX INTEGER { passauth(49187), none(1) } ACCESS read-only STATUS mandatory DESCRIPTION "this is the authorization protocol our peer requires us to use on its side of the link" DEFVAL { none } ::= { wfPppLineEntry 16 } wfPppLineLocalPapId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "our PAP id - our peer sends this to us in an Authenticate-Request message" ::= { wfPppLineEntry 17 } wfPppLineLocalPapPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "our PAP password - our peer sends this to us in an Authenticate-Request message" ::= { wfPppLineEntry 18 } wfPppLineRemotePapId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "our peer's PAP id - we send this to our peer in an Authenticate-Request message" ::= { wfPppLineEntry 19 } wfPppLineRemotePapPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "our peer's PAP password - we send this to our peer in an Authenticate-Request message" ::= { wfPppLineEntry 20 } wfPppLineLQProtocol OBJECT-TYPE SYNTAX INTEGER { linkqr(49189), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "the Link Quality protocol we want to use" DEFVAL { none } ::= { wfPppLineEntry 21 } wfPppLineDisableRemoteLQRTimer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable our peer's LQR timer - this allows for one side to maintain the timer while the other just responds to LQR packets" DEFVAL { enabled } ::= { wfPppLineEntry 22 } wfPppLineCfgLQRRptPrd OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "this is the value in seconds between transmission of LQR packets (Reporting-Period) - it will be the same on both sides" DEFVAL { 3 } ::= { wfPppLineEntry 23 } wfPppLineLQRRptPrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "this is the Reporting-Period, in seconds, agreed upon during negotiation - we allow the peer to negotiate down from our configured period, our maximum, but not below 1 second" ::= { wfPppLineEntry 24 } wfPppLineCfgInboundQuality OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "the percentage of packets sent by our peer that we've successfully received (over the last 5 LQR Reporting-Periods) - 100 indicates we won't tolerate any loss" DEFVAL { 90 } ::= { wfPppLineEntry 25 } wfPppLineInboundQuality OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the current inbound quality" ::= { wfPppLineEntry 26 } wfPppLineCfgOutboundQuality OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "the percentage of packets sent by us that our peer successfully received (over the last 5 LQR Reporting-Periods) - 100 indicates we won't tolerate any loss" DEFVAL { 90 } ::= { wfPppLineEntry 27 } wfPppLineOutboundQuality OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the current inbound quality" ::= { wfPppLineEntry 28 } wfPppLineOutLQRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the number of Link-Quality-Report packets we've transmitted" ::= { wfPppLineEntry 29 } wfPppLineInLQRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the number of Link-Quality-Report packets we've received" ::= { wfPppLineEntry 30 } wfPppLineChapSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "this CHAP secret MUST be the same on both sides of the link if CHAP is used as the Authentication protocol" ::= { wfPppLineEntry 31 } wfPppLinePapFallbackDisable OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "if an attempt to negotiate CHAP fails, enabling this allows a fallback to PAP" DEFVAL { disabled } ::= { wfPppLineEntry 32 } wfPppLineChapLocalName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to assign a local CHAP Name which is used to inform our peer of our identity, during WHOAMI processing" ::= { wfPppLineEntry 33 } wfPppLineChapRemoteName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to store our peer's CHAP Name which is used to learn our peer's identity, during WHOAMI processing" ::= { wfPppLineEntry 34 } wfPppLineChapPeriodicTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Timer for periodic CHAP in seconds. A time of 0 disables Periodic CHAP. This timer value should long enough to allow CHAP to complete one phase before entering another." ::= { wfPppLineEntry 35 } wfPppLineBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "These are packets not in correct PPP format" ::= { wfPppLineEntry 36 } wfPppLineLastBadPacket OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the first 16 bytes of the last bad packet we received" ::= { wfPppLineEntry 37 } wfPppLineLevelPktsIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the count of PPP link-level packets (such as Link Control Protocol or Compression Control Protocl) which have been received." ::= { wfPppLineEntry 38 } wfPppLineAllowPapReject OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "There are some peers that don't want us asking to be a PAP authenticator, so accept the Reject and remove PAP from the LCP Configure-Request if this is enabled." DEFVAL { disabled } ::= { wfPppLineEntry 39 } wfPppLineActiveCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit number that this PPP line belongs to For the any switched lines, this will initially be -1 " DEFVAL {65535} ::= { wfPppLineEntry 40 } wfPppLineCfgAsyncMap OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This is the initial seed value of Async-Control-Character-Map which will be used for LCP negotiations with the peer." DEFVAL { 655360 } ::= { wfPppLineEntry 41 } wfPppLineActualAsyncMap OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Async-Control-Character-Map used by the link to escape control characters in the data packet. This is the result of LCP negotiations with the peer." ::= { wfPppLineEntry 42 } wfPppLineAuthTimer OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "value for Authentication timer in seconds" DEFVAL { 10 } ::= { wfPppLineEntry 43 } wfPppLineConvergenceTimer OBJECT-TYPE SYNTAX INTEGER(1..5000) ACCESS read-write STATUS mandatory DESCRIPTION "value for Convergence timer in seconds" DEFVAL { 300 } ::= { wfPppLineEntry 44 } wfPppLineMagicNumDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows Magic Numbers to be disabled on this interface." DEFVAL { enabled } ::= { wfPppLineEntry 45 } wfPppLineMyLinkDiscr OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "value of Link Discriminator of this endpoint" ::= { wfPppLineEntry 46 } wfPppLinePeerLinkDiscr OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "value of Link Discriminator of peer's endpoint" ::= { wfPppLineEntry 47 } wfPppLineCfgMru OBJECT-TYPE SYNTAX INTEGER(1..4600) ACCESS read-write STATUS mandatory DESCRIPTION "this is the Configured MRU being used on the line" DEFVAL { 1500 } ::= { wfPppLineEntry 48 } wfPppLineRfc1661Compliance OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for RFC 1661 compliance" DEFVAL { disabled } ::= { wfPppLineEntry 49 } wfPppLineLqmCurrentState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether LQM is running on the line." DEFVAL { down } ::= { wfPppLineEntry 50 } wfPppCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF WfPppCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Wellfleet PPP Circuit Configuration Table containing attributes dealing with the network layer and each Network Control Protocol (NCP)" ::= { wfPppGroup 2 } wfPppCircuitEntry OBJECT-TYPE SYNTAX WfPppCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet circuit PPP configuration parameters and counters" INDEX { wfPppCircuitID } ::= { wfPppCircuitTable 1 } WfPppCircuitEntry ::= SEQUENCE { wfPppCircuitDelete INTEGER, wfPppCircuitState INTEGER, wfPppCircuitIpcpCurrentState INTEGER, wfPppCircuitOsinlcpCurrentState INTEGER, wfPppCircuitXnscpCurrentState INTEGER, wfPppCircuitDncpCurrentState INTEGER, wfPppCircuitAtcpCurrentState INTEGER, wfPppCircuitIpxcpCurrentState INTEGER, wfPppCircuitBncpCurrentState INTEGER, wfPppCircuitVncpCurrentState INTEGER, wfPppCircuitID INTEGER, wfPppCircuitIpDisable INTEGER, wfPppCircuitOsinlDisable INTEGER, wfPppCircuitXnsDisable INTEGER, wfPppCircuitDecnetDisable INTEGER, wfPppCircuitAppletalkDisable INTEGER, wfPppCircuitIpxDisable INTEGER, wfPppCircuitBridgeDisable INTEGER, wfPppCircuitVinesDisable INTEGER, wfPppCircuitCfgLocalIpAddr IpAddress, wfPppCircuitLocalIpAddr IpAddress, wfPppCircuitCfgRemoteIpAddr IpAddress, wfPppCircuitRemoteIpAddr IpAddress, wfPppCircuitCfgIpxNetworkNumber OCTET STRING, wfPppCircuitIpxNetworkNumber OCTET STRING, wfPppCircuitIpxRemoteNodeNumber OCTET STRING, wfPppCircuitCfgIpxRoutingProtocol INTEGER, wfPppCircuitIpxRoutingProtocol INTEGER, wfPppCircuitLocalIpxRouterName DisplayString, wfPppCircuitRemoteIpxRouterName DisplayString, wfPppCircuitIpxConfigComplete INTEGER, wfPppCircuitCfgAtNetwork INTEGER, wfPppCircuitAtNetwork INTEGER, wfPppCircuitCfgLocalAtNode INTEGER, wfPppCircuitLocalAtNode INTEGER, wfPppCircuitCfgRemoteAtNode INTEGER, wfPppCircuitRemoteAtNode INTEGER, wfPppCircuitCfgAtRoutingProtocol INTEGER, wfPppCircuitAtRoutingProtocol INTEGER, wfPppCircuitCfgBridgeEnet INTEGER, wfPppCircuitBridgeEnet INTEGER, wfPppCircuitCfgBridgeFddi INTEGER, wfPppCircuitBridgeFddi INTEGER, wfPppCircuitCfgBridgeTokenRing INTEGER, wfPppCircuitBridgeTokenRing INTEGER, wfPppCircuitBadPackets Counter, wfPppCircuitLastBadPacket OCTET STRING, wfPppCircuitCcpCurrentState INTEGER, wfPppCircuitCcpDisable INTEGER, wfPppCircuitPppMode INTEGER, wfPppCircuitMLFragPerm INTEGER, wfPppCircuitExamPeriod INTEGER, wfPppCircuitFullThreshold INTEGER, wfPppCircuitPeriodsCng INTEGER, wfPppCircuitPrefBwSlot INTEGER, wfPppCircuitResvBwSlot INTEGER, wfPppCircuitMLFragTriggerSize INTEGER, wfPppCircuitMaxLinks INTEGER, wfPppCircuitRecoverThreshold INTEGER, wfPppCircuitPeriodsUnCng INTEGER, wfPppCircuitHistory DisplayString, wfPppCircuitDebugFlag INTEGER, wfPppCircuitActualMode INTEGER, wfPppCircuitMaxBuffers INTEGER, wfPppCircuitLinksConfigured INTEGER, wfPppCircuitBacpDisable INTEGER, wfPppCircuitBacpCurrentState INTEGER, wfPppCircuitBacpNoPhoneNum INTEGER, wfPppCircuitIpv6Disable INTEGER, wfPppCircuitIpv6CurrentState INTEGER, wfPppCircuitCcpType INTEGER, wfPppCircuitCfgCcpOptions INTEGER, wfPppCircuitCcpOptions INTEGER, wfPppCircuitStacLZSCheckMode INTEGER, wfPppCircuitMLFragStrict INTEGER, wfPppCircuitLampreyCompDisable INTEGER, wfPppCircuitMsgLevel INTEGER, wfPppCircuitType INTEGER } wfPppCircuitDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfPppCircuitEntry 1 } wfPppCircuitState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "PPP state variable, Not Present, Init, Down, Up" DEFVAL { notpresent } ::= { wfPppCircuitEntry 2 } wfPppCircuitIpcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the IPCP Finite State Machine" ::= { wfPppCircuitEntry 3 } wfPppCircuitOsinlcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the OSINLCP Finite State Machine" ::= { wfPppCircuitEntry 4 } wfPppCircuitXnscpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the XNSCP Finite State Machine" ::= { wfPppCircuitEntry 5 } wfPppCircuitDncpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the DNCP Finite State Machine" ::= { wfPppCircuitEntry 6 } wfPppCircuitAtcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the ATCP Finite State Machine" ::= { wfPppCircuitEntry 7 } wfPppCircuitIpxcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the IPXCP Finite State Machine" ::= { wfPppCircuitEntry 8 } wfPppCircuitBncpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the BNCP Finite State Machine" ::= { wfPppCircuitEntry 9 } wfPppCircuitVncpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the VNCP Finite State Machine" ::= { wfPppCircuitEntry 10 } wfPppCircuitID OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-only STATUS mandatory DESCRIPTION "cct number for this instance" ::= { wfPppCircuitEntry 11 } wfPppCircuitIpDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable IP Protocol - disabling generates a Close event to the IPCP FSM and consequently disallows IP traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 12 } wfPppCircuitOsinlDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable OSI Network Layer Protocol - disabling generates a Close event to the OSINLCP FSM and consequently disallows OSI traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 13 } wfPppCircuitXnsDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable XNS Protocol - disabling generates a Close event to the XNSCP FSM and consequently disallows XNS traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 14 } wfPppCircuitDecnetDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable DECnet Protocol - disabling generates a Close event to the DNCP FSM and consequently disallows DECnet traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 15 } wfPppCircuitAppletalkDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable AppleTalk Protocol - disabling generates a Close event to the ATCP FSM and consequently disallows AppleTalk traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 16 } wfPppCircuitIpxDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable IPX Protocol - disabling generates a Close event to the IPXCP FSM and consequently disallows IPX traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 17 } wfPppCircuitBridgeDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable the Bridge - disabling generates a Close event to the BNCP FSM and consequently disallows bridge traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 18 } wfPppCircuitVinesDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable Vines Protocol - disabling generates a Close event to the VNCP FSM and consequently disallows Vines traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 19 } wfPppCircuitCfgLocalIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "the IP address we're going to use" ::= { wfPppCircuitEntry 20 } wfPppCircuitLocalIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "the IP address our peer wants us to use" ::= { wfPppCircuitEntry 21 } wfPppCircuitCfgRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "the IP address we want our peer to use" ::= { wfPppCircuitEntry 22 } wfPppCircuitRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "the IP address our peer wants to use" ::= { wfPppCircuitEntry 23 } wfPppCircuitCfgIpxNetworkNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "the configured IPX Network Number to be used by both us and our peer" ::= { wfPppCircuitEntry 24 } wfPppCircuitIpxNetworkNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "the result of IPX Network Number negotiation" ::= { wfPppCircuitEntry 25 } wfPppCircuitIpxRemoteNodeNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "this is what we'll tell our peer to use for node number if it sends us a 0" ::= { wfPppCircuitEntry 26 } wfPppCircuitCfgIpxRoutingProtocol OBJECT-TYPE SYNTAX INTEGER { ripsap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "the desired IPX Routing Protocol to be used on the link" DEFVAL { ripsap } ::= { wfPppCircuitEntry 27 } wfPppCircuitIpxRoutingProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the negotiated IPX Routing Protocol to be used on the link" ::= { wfPppCircuitEntry 28 } wfPppCircuitLocalIpxRouterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "our IPX Router Name" ::= { wfPppCircuitEntry 29 } wfPppCircuitRemoteIpxRouterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "our peer's IPX Router Name" ::= { wfPppCircuitEntry 30 } wfPppCircuitIpxConfigComplete OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "indicates whether or not IPXCP converged on all required options" ::= { wfPppCircuitEntry 31 } wfPppCircuitCfgAtNetwork OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "the configured AppleTalk network number - our peer must use the same number" ::= { wfPppCircuitEntry 32 } wfPppCircuitAtNetwork OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the AppleTalk network number we agreed to use" ::= { wfPppCircuitEntry 33 } wfPppCircuitCfgLocalAtNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "the AppleTalk node number we're configured to use" ::= { wfPppCircuitEntry 34 } wfPppCircuitLocalAtNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "our AppleTalk node number after negotiation" ::= { wfPppCircuitEntry 35 } wfPppCircuitCfgRemoteAtNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "the AppleTalk node number we want our peer to use" ::= { wfPppCircuitEntry 36 } wfPppCircuitRemoteAtNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "our peer's AppleTalk node number after negotiation" ::= { wfPppCircuitEntry 37 } wfPppCircuitCfgAtRoutingProtocol OBJECT-TYPE SYNTAX INTEGER { rtmp(1), aurp(2), abgp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "the desired AppleTalk Routing Protocol to be used on the link" DEFVAL { rtmp } ::= { wfPppCircuitEntry 38 } wfPppCircuitAtRoutingProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the negotiated AppleTalk Routing Protocol to be used on the link" ::= { wfPppCircuitEntry 39 } wfPppCircuitCfgBridgeEnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "allow/disallow Ethernet bridged frames" DEFVAL { enabled } ::= { wfPppCircuitEntry 40 } wfPppCircuitBridgeEnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "result of bridge MAC type negotiation for Ethernet" ::= { wfPppCircuitEntry 41 } wfPppCircuitCfgBridgeFddi OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "allow/disallow FDDI bridged frames" DEFVAL { enabled } ::= { wfPppCircuitEntry 42 } wfPppCircuitBridgeFddi OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "result of bridge MAC type negotiation for FDDI" ::= { wfPppCircuitEntry 43 } wfPppCircuitCfgBridgeTokenRing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "allow/disallow Token Ring bridged frames" DEFVAL { enabled } ::= { wfPppCircuitEntry 44 } wfPppCircuitBridgeTokenRing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "result of bridge MAC type negotiation for Token Ring" ::= { wfPppCircuitEntry 45 } wfPppCircuitBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "these are packets not in correct PPP format" ::= { wfPppCircuitEntry 46 } wfPppCircuitLastBadPacket OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "this is the first 16 bytes of the last bad packet we received" ::= { wfPppCircuitEntry 47 } wfPppCircuitCcpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the CCP Finite State Machine" ::= { wfPppCircuitEntry 48 } wfPppCircuitCcpDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable compression - disabling generates a Close event to the CCP FSM and consequently disallows compression traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 49 } wfPppCircuitPppMode OBJECT-TYPE SYNTAX INTEGER { normal(1), nego(2), multilink(3), monitor(4), dynamic-monitor(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Pre 9.0 multilines can only negotiate LCP over 1 line. The exact line which LCP will occur on is unknown. So in order to handle this situation we will wait until we receive an LCP Request before we attempt to negotiate LCP by setting the mode to PPP_MODE_PEER_SOLICITED_LCP_NEGO. If we are using this line as a single PPP Line or we are sure our peer can handle LCP on all the members of the multiline, PPP_MODE_NORMAL should be selected. Multilink is a PPP protocol extension which provides restoration of packets which arrive out of sequence, a possibility with multiple lines. Multilink monitor, in conjunction with other configuration data allows the throughput of a line to be monitored. Additional lines can be brought into the bundle and taken down dynamically in response to data traffic volume and other conditions." DEFVAL { normal } ::= { wfPppCircuitEntry 50 } wfPppCircuitMLFragPerm OBJECT-TYPE SYNTAX INTEGER { permitted(1), prohibited(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows interoperability with PPP Multilink implementations which do not allow fragmentation." DEFVAL { permitted } ::= { wfPppCircuitEntry 51 } wfPppCircuitExamPeriod OBJECT-TYPE SYNTAX INTEGER(5..200) ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the interval that the Multilink bundle should be polled for possible congestion. This value is in tenths of a second" DEFVAL { 10 } ::= { wfPppCircuitEntry 52 } wfPppCircuitFullThreshold OBJECT-TYPE SYNTAX INTEGER(10..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This is the percentage of the theoretical maximum line throughput that must be reached or exceeded before the line is considered congested." DEFVAL { 70 } ::= { wfPppCircuitEntry 53 } wfPppCircuitPeriodsCng OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is the number of consecutive periods where the line throughput is above the congestion threshold required to declare the line congested and attempt corrective action." DEFVAL { 10 } ::= { wfPppCircuitEntry 54 } wfPppCircuitPrefBwSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the preferred bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked first." ::= { wfPppCircuitEntry 55 } wfPppCircuitResvBwSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the reserve bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked if the preferred slot can not provide a line." ::= { wfPppCircuitEntry 56 } wfPppCircuitMLFragTriggerSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the minimum size of a packet of which Multilink will fragment." DEFVAL { 256 } ::= { wfPppCircuitEntry 57 } wfPppCircuitMaxLinks OBJECT-TYPE SYNTAX INTEGER(0..4) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of links allowed in the Multilink bundle for this circuit at any one time." DEFVAL { 4 } ::= { wfPppCircuitEntry 58 } wfPppCircuitRecoverThreshold OBJECT-TYPE SYNTAX INTEGER(10..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This is the recovery threshold expressed as a percentage of the theoretical maximum bundle throughput. The actual throughput must fall below this percentage in order for the BOD circuit to begin to remove lines from the Multilink bundle." DEFVAL { 50 } ::= { wfPppCircuitEntry 59 } wfPppCircuitPeriodsUnCng OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used for recovery. Once a Multilink bundle has been declared as congested, this is the number of consecutive examination periods where the queue depth is below the recovery threshold value required to declare that the bundle is no longer congested." DEFVAL { 10 } ::= { wfPppCircuitEntry 60 } wfPppCircuitHistory OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "DEBUG parameter - This is the BOD history buffer." ::= { wfPppCircuitEntry 61 } wfPppCircuitDebugFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DEBUG parameter - This is the BOD Debug flag, used to control debug code for BOD." ::= { wfPppCircuitEntry 62 } wfPppCircuitActualMode OBJECT-TYPE SYNTAX INTEGER { normal(1), multilink(3), monitor(4), inactive(20) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the actual ppp mode of the circuit after LCP has negotiated. " DEFVAL { normal } ::= { wfPppCircuitEntry 63 } wfPppCircuitMaxBuffers OBJECT-TYPE SYNTAX INTEGER(10..60) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of stored buffers allowed in the Multilink Receive logic for this circuit at any one time." DEFVAL { 30 } ::= { wfPppCircuitEntry 64 } wfPppCircuitLinksConfigured OBJECT-TYPE SYNTAX INTEGER(0..30) ACCESS read-write STATUS mandatory DESCRIPTION "This is the current number of lines configured for this Multilink circuit." ::= { wfPppCircuitEntry 65 } wfPppCircuitBacpDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable BACP Protocol - disabling generates a Close event to the BACP FSM and consequently disallows BAP traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 66 } wfPppCircuitBacpCurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the BACP Finite State Machine" ::= { wfPppCircuitEntry 67 } wfPppCircuitBacpNoPhoneNum OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable sending of the No-Phone-Number-Needed option in BACP Call Request packets" DEFVAL { disabled } ::= { wfPppCircuitEntry 68 } wfPppCircuitIpv6Disable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable IPv6 Protocol - disabling generates a Close event to the IPv6CP FSM and consequently disallows IPv6 traffic on this circuit" DEFVAL { disabled } ::= { wfPppCircuitEntry 69 } wfPppCircuitIpv6CurrentState OBJECT-TYPE SYNTAX INTEGER { starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "the current state of the Ipv6 Finite State Machine" ::= { wfPppCircuitEntry 70 } wfPppCircuitCcpType OBJECT-TYPE SYNTAX INTEGER { ilccp(1), ccp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether to use CCP or Individual Link CCP" DEFVAL { ccp } ::= { wfPppCircuitEntry 71 } wfPppCircuitCfgCcpOptions OBJECT-TYPE SYNTAX INTEGER { all(1), oui-wcp(2), staclzs(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the compression protocol options in 1st config-request" DEFVAL { all } ::= { wfPppCircuitEntry 72 } wfPppCircuitCcpOptions OBJECT-TYPE SYNTAX INTEGER { none(1), oui-wcp(2), staclzs(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The negotiated compression protocol option" DEFVAL { none } ::= { wfPppCircuitEntry 73 } wfPppCircuitStacLZSCheckMode OBJECT-TYPE SYNTAX INTEGER { mode0(1), mode3(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the check mode for STAC LZS compression protocol. See RFC 1974 for more information." DEFVAL { mode3 } ::= { wfPppCircuitEntry 74 } wfPppCircuitMLFragStrict OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable strict fragmentation algorithm i.e. fragmenting a packet when its size exceeds the threshold regardless of what the average packet size is" DEFVAL { disabled } ::= { wfPppCircuitEntry 75 } wfPppCircuitLampreyCompDisable OBJECT-TYPE SYNTAX INTEGER { slot1 (1), slot2 (2), slot3 (3), slot4 (4), slot5 (5), slot6 (6), slot7 (7), slot8 (8), slot9 (9), slot10 (10), slot11 (11), slot12 (12), slot13 (13), slot14 (14), disabled(99) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable hardware compression, either from the compression daugther card on the Lamprey or the old compression daugther interface card on the link module, it tells you where the compression hardware is" DEFVAL { disabled } ::= { wfPppCircuitEntry 76 } wfPppCircuitMsgLevel OBJECT-TYPE SYNTAX INTEGER { all(2031616), debug(65536), info(131072), warning(262144), fault(524288), trace(1048576), infofaultwarning(917504) } ACCESS read-write STATUS mandatory DESCRIPTION "PPP Circuit log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00010000 - 65536 DBG_MSG_INFO 0x00020000 - 131072 DBG_MSG_WARNING 0x00040000 - 262144 DBG_MSG_FAULT 0x00080000 - 524288 DBG_MSG_TRACE 0x00100000 - 1048576" DEFVAL { infofaultwarning } ::= { wfPppCircuitEntry 77 } wfPppCircuitType OBJECT-TYPE SYNTAX INTEGER { unknown(9), dialup(1), l2tp(2), leased(3) } ACCESS read-write STATUS mandatory DESCRIPTION "To differentiate between a Dial Up PPP circuit from L2TP and Leased Line" DEFVAL { unknown } ::= { wfPppCircuitEntry 78 } wfPppWhoamiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfPppWhoamiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Wellfleet PPP WHOAMI Table, containing a mapping of peer CHAP Names and the circuit numbers they map to" ::= { wfPppGroup 3 } wfPppWhoamiEntry OBJECT-TYPE SYNTAX WfPppWhoamiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Map the value of this entry's CHAP Name to the value of this entry's CCT number" INDEX { wfPppWhoamiName } ::= { wfPppWhoamiTable 1 } WfPppWhoamiEntry ::= SEQUENCE { wfPppWhoamiDelete INTEGER, wfPppWhoamiName DisplayString, wfPppWhoamiCircuit INTEGER, wfPppWhoamiSecret DisplayString, wfPppWhoamiPapPassword DisplayString, wfPppWhoamiCctGrp INTEGER } wfPppWhoamiDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfPppWhoamiEntry 1 } wfPppWhoamiName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Peer CHAP Name" ::= { wfPppWhoamiEntry 2 } wfPppWhoamiCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number to map to" ::= { wfPppWhoamiEntry 3 } wfPppWhoamiSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Peer CHAP Secret" ::= { wfPppWhoamiEntry 4 } wfPppWhoamiPapPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Peer Pap Password" ::= { wfPppWhoamiEntry 5 } wfPppWhoamiCctGrp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Unnumbered circuit group to map to" ::= { wfPppWhoamiEntry 6 } wfPppMlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfPppMlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Wellfleet PPP Multilink Stats Table, containing statistics for each Multilink Circuit" ::= { wfPppGroup 4 } wfPppMlStatsEntry OBJECT-TYPE SYNTAX WfPppMlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet circuit PPP Multilink counters" INDEX { wfPppMlStatsCircuitID } ::= { wfPppMlStatsTable 1 } WfPppMlStatsEntry ::= SEQUENCE { wfPppMlStatsDelete INTEGER, wfPppMlStatsCircuitID INTEGER, wfPppMlStatsHomeSlot INTEGER, wfPppMlStatsLineCnt Gauge, wfPppMlStatsBundleSpd Gauge, wfPppMlStatsMrru Gauge, wfPppMlStatsEndptDisc OCTET STRING, wfPppMlStatsTxOctets Counter, wfPppMlStatsTxPkts Counter, wfPppMlStatsAvgTxListLen Gauge, wfPppMlStatsRxOctets Counter, wfPppMlStatsRxPkts Counter, wfPppMlStatsReasmFails Counter, wfPppMlStatsSeqNumberLost Counter, wfPppMlStatsSeqNumberArrivedLate Counter, wfPppMlStatsReSeqBufferCnt Gauge, wfPppMlStatsReSeqBufferMax Counter, wfPppMlStatsExceededBufferMax Counter, wfPppMlStatsLinkIdleEvents Counter, wfPppMlStatsCalcPercent INTEGER, wfPppMlStatsDebug INTEGER, wfPppMlStatsReassmBufferCnt Gauge, wfPppMlStatsReassmBufferMax Counter, wfPppMlStatsNumPktsFragmented Counter, wfPppMlStatsPQHiXmits Counter, wfPppMlStatsPQNormalXmits Counter, wfPppMlStatsPQLoXmits Counter, wfPppMlStatsPQHiClippedPkts Counter, wfPppMlStatsPQNormalClippedPkts Counter, wfPppMlStatsPQLoClippedPkts Counter, wfPppMlStatsPQIntrQHighWaterPkts Gauge, wfPppMlStatsPQHiQHighWaterPkts Gauge, wfPppMlStatsPQNormalQHighWaterPkts Gauge, wfPppMlStatsPQLoQHighWaterPkts Gauge, wfPppMlStatsPQHighWaterPktsClear INTEGER, wfPppMlStatsPQDroppedPkts Counter, wfPppMlStatsPQLargePkts Counter, wfPppMlStatsPQHiTotalOctets Counter, wfPppMlStatsPQNormalTotalOctets Counter, wfPppMlStatsPQLoTotalOctets Counter, wfPppMlStatsPQPktsNotQueued Counter } wfPppMlStatsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfPppMlStatsEntry 1 } wfPppMlStatsCircuitID OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-only STATUS mandatory DESCRIPTION "cct number for this instance" ::= { wfPppMlStatsEntry 2 } wfPppMlStatsHomeSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot on which this Multilink Control Subsystem exists" ::= { wfPppMlStatsEntry 3 } wfPppMlStatsLineCnt OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current count of lines in Multilink bundle" ::= { wfPppMlStatsEntry 4 } wfPppMlStatsBundleSpd OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current total bandwidth of Multilink bundle" ::= { wfPppMlStatsEntry 5 } wfPppMlStatsMrru OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current Maximum Receive Reconstructed Unit (MRRU) in use for Multilink bundle" ::= { wfPppMlStatsEntry 6 } wfPppMlStatsEndptDisc OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Current Endpoint Discriminator in use for Multilink bundle" ::= { wfPppMlStatsEntry 7 } wfPppMlStatsTxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets transmitted by Multilink" ::= { wfPppMlStatsEntry 8 } wfPppMlStatsTxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets transmitted by Multilink" ::= { wfPppMlStatsEntry 9 } wfPppMlStatsAvgTxListLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Average number of packets received in the transient list by the Multilink Transmit gate." ::= { wfPppMlStatsEntry 10 } wfPppMlStatsRxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets received without error" ::= { wfPppMlStatsEntry 11 } wfPppMlStatsRxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received by Multilink" ::= { wfPppMlStatsEntry 12 } wfPppMlStatsReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packet reassembly failures" ::= { wfPppMlStatsEntry 13 } wfPppMlStatsSeqNumberLost OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multilink packets considered to be lost on the wire" ::= { wfPppMlStatsEntry 14 } wfPppMlStatsSeqNumberArrivedLate OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multilink packets which arrive containing an old Sequence Number. IE: packets with a more current Sequence Number have already been sent up to NCP" ::= { wfPppMlStatsEntry 15 } wfPppMlStatsReSeqBufferCnt OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multilink packets currently stored in the ReSequencing buffer pool." ::= { wfPppMlStatsEntry 16 } wfPppMlStatsReSeqBufferMax OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Number of Multilink packets stored in the ReSequencing buffer pool." ::= { wfPppMlStatsEntry 17 } wfPppMlStatsExceededBufferMax OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfPppMlStatsReSeqBufferMax,was equal to the maximum allowable for this circuit, wfPppCircuitMaxBuffers." ::= { wfPppMlStatsEntry 18 } wfPppMlStatsLinkIdleEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the Multilink Receive logic detected a stored buffer received on a line which has been declared idle." ::= { wfPppMlStatsEntry 19 } wfPppMlStatsCalcPercent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable collection of Rx percentage line usage" DEFVAL { disabled } ::= { wfPppMlStatsEntry 20 } wfPppMlStatsDebug OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DEBUG parameter - this is used to control debug code for the Multilink subsystem" ::= { wfPppMlStatsEntry 21 } wfPppMlStatsReassmBufferCnt OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multilink packets currently stored in the Reassembling buffer pools." ::= { wfPppMlStatsEntry 22 } wfPppMlStatsReassmBufferMax OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Number of Multilink packets stored in the Reassembling buffer pools." ::= { wfPppMlStatsEntry 23 } wfPppMlStatsNumPktsFragmented OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of Multilink packets that were fragmented." ::= { wfPppMlStatsEntry 24 } wfPppMlStatsPQHiXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "High priority transmit count." ::= { wfPppMlStatsEntry 25 } wfPppMlStatsPQNormalXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Normal priority transmit count." ::= { wfPppMlStatsEntry 26 } wfPppMlStatsPQLoXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Low priority transmit count" ::= { wfPppMlStatsEntry 27 } wfPppMlStatsPQHiClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "High priority transmit clip Count" ::= { wfPppMlStatsEntry 28 } wfPppMlStatsPQNormalClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Normal priority transmit clip Count" ::= { wfPppMlStatsEntry 29 } wfPppMlStatsPQLoClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Low priority transmit clip Count" ::= { wfPppMlStatsEntry 30 } wfPppMlStatsPQIntrQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Interrupt-priority Queue high-water mark" ::= { wfPppMlStatsEntry 31 } wfPppMlStatsPQHiQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "High-priority Queue high-water mark" ::= { wfPppMlStatsEntry 32 } wfPppMlStatsPQNormalQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Normal-priority Queue high-water mark" ::= { wfPppMlStatsEntry 33 } wfPppMlStatsPQLoQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Low-priority Queue high-water mark" ::= { wfPppMlStatsEntry 34 } wfPppMlStatsPQHighWaterPktsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero." ::= { wfPppMlStatsEntry 35 } wfPppMlStatsPQDroppedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets which were filtered in Priority Queueing" ::= { wfPppMlStatsEntry 36 } wfPppMlStatsPQLargePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Large Packets which became an exception to latency rules" ::= { wfPppMlStatsEntry 37 } wfPppMlStatsPQHiTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfPppMlStatsEntry 38 } wfPppMlStatsPQNormalTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfPppMlStatsEntry 39 } wfPppMlStatsPQLoTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfPppMlStatsEntry 40 } wfPppMlStatsPQPktsNotQueued OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets that were not Queued or Dropped by Priority Queuing " ::= { wfPppMlStatsEntry 41 } wfPppBapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfPppBapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Wellfleet PPP BAP Stats Table, containing statistics for each BACP Circuit" ::= { wfPppGroup 5 } wfPppBapStatsEntry OBJECT-TYPE SYNTAX WfPppBapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet circuit PPP BAP counters" INDEX { wfPppBapStatsCircuitID } ::= { wfPppBapStatsTable 1 } WfPppBapStatsEntry ::= SEQUENCE { wfPppBapStatsDelete INTEGER, wfPppBapStatsCircuitID INTEGER, wfPppBapCallReqTx Counter, wfPppBapCallRespAckTx Counter, wfPppBapCallRespNakTx Counter, wfPppBapCallRespFullNakTx Counter, wfPppBapCallRespRejTx Counter, wfPppBapCallbackReqTx Counter, wfPppBapCallbackRespAckTx Counter, wfPppBapCallbackRespNakTx Counter, wfPppBapCallbackRespFullNakTx Counter, wfPppBapCallbackRespRejTx Counter, wfPppBapLdQueryReqTx Counter, wfPppBapLdQueryRespAckTx Counter, wfPppBapLdQueryRespNakTx Counter, wfPppBapLdQueryRespFullNakTx Counter, wfPppBapCallStatusIndFailTx Counter, wfPppBapCallStatusIndSuccessTx Counter, wfPppBapCallStatusRespTx Counter, wfPppBapCallReqRx Counter, wfPppBapCallRespAckRx Counter, wfPppBapCallRespNakRx Counter, wfPppBapCallRespFullNakRx Counter, wfPppBapCallRespRejRx Counter, wfPppBapCallbackReqRx Counter, wfPppBapCallbackRespAckRx Counter, wfPppBapCallbackRespNakRx Counter, wfPppBapCallbackRespFullNakRx Counter, wfPppBapCallbackRespRejRx Counter, wfPppBapLdQueryReqRx Counter, wfPppBapLdQueryRespAckRx Counter, wfPppBapLdQueryRespNakRx Counter, wfPppBapLdQueryRespFullNakRx Counter, wfPppBapCallStatusIndFailRx Counter, wfPppBapCallStatusIndSuccessRx Counter, wfPppBapCallStatusRespRx Counter, wfPppBapCallReqRespDiscardRx Counter, wfPppBapCallbackReqRespDiscardRx Counter } wfPppBapStatsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfPppBapStatsEntry 1 } wfPppBapStatsCircuitID OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-only STATUS mandatory DESCRIPTION "cct number for this instance" ::= { wfPppBapStatsEntry 2 } wfPppBapCallReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Requests transmitted by BAP" ::= { wfPppBapStatsEntry 3 } wfPppBapCallRespAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses transmitted by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 4 } wfPppBapCallRespNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses transmitted by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 5 } wfPppBapCallRespFullNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses transmitted by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 6 } wfPppBapCallRespRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses transmitted by BAP with a Response Code of Request_Rej" ::= { wfPppBapStatsEntry 7 } wfPppBapCallbackReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Requests transmitted by BAP" ::= { wfPppBapStatsEntry 8 } wfPppBapCallbackRespAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses transmitted by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 9 } wfPppBapCallbackRespNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses transmitted by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 10 } wfPppBapCallbackRespFullNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses transmitted by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 11 } wfPppBapCallbackRespRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses transmitted by BAP with a Response Code of Request_Rej" ::= { wfPppBapStatsEntry 12 } wfPppBapLdQueryReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Requests transmitted by BAP" ::= { wfPppBapStatsEntry 13 } wfPppBapLdQueryRespAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 14 } wfPppBapLdQueryRespNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 15 } wfPppBapLdQueryRespFullNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 16 } wfPppBapCallStatusIndFailTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Indications transmitted by BAP with a non-zero Call Status" ::= { wfPppBapStatsEntry 17 } wfPppBapCallStatusIndSuccessTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Indications transmitted by BAP with a zero Call Status" ::= { wfPppBapStatsEntry 18 } wfPppBapCallStatusRespTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Response transmitted by BAP" ::= { wfPppBapStatsEntry 19 } wfPppBapCallReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Requests received by BAP" ::= { wfPppBapStatsEntry 20 } wfPppBapCallRespAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses received by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 21 } wfPppBapCallRespNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses received by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 22 } wfPppBapCallRespFullNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses received by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 23 } wfPppBapCallRespRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call Responses received by BAP with a Response Code of Request_Rej" ::= { wfPppBapStatsEntry 24 } wfPppBapCallbackReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Requests received by BAP" ::= { wfPppBapStatsEntry 25 } wfPppBapCallbackRespAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses received by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 26 } wfPppBapCallbackRespNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses received by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 27 } wfPppBapCallbackRespFullNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses received by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 28 } wfPppBapCallbackRespRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback Responses received by BAP with a Response Code of Request_Rej" ::= { wfPppBapStatsEntry 29 } wfPppBapLdQueryReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Requests received by BAP" ::= { wfPppBapStatsEntry 30 } wfPppBapLdQueryRespAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Ack" ::= { wfPppBapStatsEntry 31 } wfPppBapLdQueryRespNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Nak" ::= { wfPppBapStatsEntry 32 } wfPppBapLdQueryRespFullNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Full_Nak" ::= { wfPppBapStatsEntry 33 } wfPppBapCallStatusIndFailRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Indications received by BAP with a non-zero Call Status" ::= { wfPppBapStatsEntry 34 } wfPppBapCallStatusIndSuccessRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Indications received by BAP with a zero Call Status" ::= { wfPppBapStatsEntry 35 } wfPppBapCallStatusRespRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Status_Response received by BAP" ::= { wfPppBapStatsEntry 36 } wfPppBapCallReqRespDiscardRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Call_Response received by BAP with an old identifier." ::= { wfPppBapStatsEntry 37 } wfPppBapCallbackReqRespDiscardRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Callback_Response received by BAP with an old identifier." ::= { wfPppBapStatsEntry 38 } END -- Wellfleet-PPP-MIB