You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Altiga Networks Inc > ALTIGA-CERT-STATS-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ALTIGA-CERT-STATS-MIB by vendor Altiga Networks Inc

ALTIGA-CERT-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ALTIGA-CERT-STATS-MIB.


Vendor: Altiga Networks Inc
Mib: ALTIGA-CERT-STATS-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *------------------------------------------------------------------
-- * ALTIGA-CERT-STATS-MIB.my:  Altiga Digital Certificates Statistics.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-CERT-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
                   FROM SNMPv2-SMI
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsCert, alCertGroup
         FROM ALTIGA-MIB
      alCertMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaCertStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga Digital Certificates Statistics MIB models counters and objects that are
          of management interest for digital certificates.
         
          Acronyms
          The following acronyms are used in this document:

            CA:         Certificate Authority

            CRL:        Certificate Revocation List

            IP:         Internet Protocol

            MIB:        Management Information Base

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alCertMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsCertGlobal OBJECT IDENTIFIER ::= { alStatsCert 1 }

alCertStatsServerTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlCertStatsServerEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "List table listing the CA servers."
   ::= { alStatsCert 2 }

alCertStatsServerEntry     OBJECT-TYPE
   SYNTAX         AlCertStatsServerEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry representing a CA server."
   INDEX    { alCertStatsServerIndex }
   ::= { alCertStatsServerTable 1 }

AlCertStatsServerEntry ::= SEQUENCE {
        alCertStatsServerIndex               Integer32,
        alCertStatsServerAddress             IpAddress,
        alCertStatsServerPortNumber          Integer32,
        alCertStatsServerCertRequests        Counter32,
        alCertStatsServerCertRetransmissions Counter32,
        alCertStatsServerCertRcvd            Counter32,
        alCertStatsServerCertPendingRequests Gauge32,
        alCertStatsServerCertTimeouts        Counter32,
        alCertStatsServerCRLRequests         Counter32,
        alCertStatsServerCRLRetransmissions  Counter32,
        alCertStatsServerCRLRcvd             Counter32,
        alCertStatsServerCRLPendingRequests  Gauge32,
        alCertStatsServerCRLTimeouts         Counter32
}

alCertStatsServerIndex     OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Index of this CA."
   ::= { alCertStatsServerEntry 1 }

alCertStatsServerAddress   OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The IP address of this CA."
   ::= { alCertStatsServerEntry 2 }

alCertStatsServerPortNumber     OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The port number of this CA."
   ::= { alCertStatsServerEntry 3 }

alCertStatsServerCertRequests OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of certificate request packets sent
                to this CA since client start-up. This does not
                include retransmissions."
   ::= { alCertStatsServerEntry 4 }

alCertStatsServerCertRetransmissions OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of certificate request packets
                retransmitted to this CA since client start-up."
   ::= { alCertStatsServerEntry 5 }

alCertStatsServerCertRcvd       OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of certificates received from
                this server since client start-up."
   ::= { alCertStatsServerEntry 6 }

alCertStatsServerCertPendingRequests OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of certificate request packets
                destined for this server that have not yet timed out
                or received a response. This variable is incremented
                when certificate request is sent and decremented due to
                receipt of a certificate, a timeout or retransmission."
   ::= { alCertStatsServerEntry 7 }

alCertStatsServerCertTimeouts   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of certificate timeouts to this
                server since client startup."
   ::= { alCertStatsServerEntry 8 }

alCertStatsServerCRLRequests    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of CRL request packets sent
                to this CA since client start-up. This does not
                include retransmissions."
   ::= { alCertStatsServerEntry 9 }

alCertStatsServerCRLRetransmissions OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of CRL request packets
                retransmitted to this CA since client start-up."
   ::= { alCertStatsServerEntry 10 }

alCertStatsServerCRLRcvd        OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of CRL received from
                this server since client start-up."
   ::= { alCertStatsServerEntry 11 }

alCertStatsServerCRLPendingRequests OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of CRL request packets
                destined for this server that have not yet timed out
                or received a response. This variable is incremented
                when certificate request is sent and decremented due to
                receipt of a certificate, a timeout or retransmission."
   ::= { alCertStatsServerEntry 12 }

alCertStatsServerCRLTimeouts    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
               "The total number of CRL timeouts to this server since
                client startup."
   ::= { alCertStatsServerEntry 13 }

altigaCertStatsMibConformance OBJECT IDENTIFIER ::= { altigaCertStatsMibModule 1 }
altigaCertStatsMibCompliances OBJECT IDENTIFIER ::= { altigaCertStatsMibConformance 1 }

altigaCertStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga Digital Certificates Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaCertStatsGroup
   }
   ::= { altigaCertStatsMibCompliances 1 }

altigaCertStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alCertStatsServerIndex,
      alCertStatsServerAddress,
      alCertStatsServerPortNumber,
      alCertStatsServerCertRequests,
      alCertStatsServerCertRetransmissions,
      alCertStatsServerCertRcvd,
      alCertStatsServerCertPendingRequests,
      alCertStatsServerCertTimeouts,
      alCertStatsServerCRLRequests,
      alCertStatsServerCRLRetransmissions,
      alCertStatsServerCRLRcvd,
      alCertStatsServerCRLPendingRequests,
      alCertStatsServerCRLTimeouts
   }
   STATUS   current
   DESCRIPTION
      "The objects for Cert statistics."
   ::= { alCertGroup 2 }

END