CABH-QOS-MIB.mib object view, vendor Cable-Television-Laboratories-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CABH-QOS-MIB and use it to monitor vendor specific OID's.
CABH-QOS-MIB file content
Object view of CABH-QOS-MIB:
| Scalar Object |
| cabhPriorityQosMasterEntry |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.1.1 |
|
An entry for mapping Application IDs to
Default CableHome Priorities.
|
| cabhPriorityQosSetToFactory |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.2 |
|
Reading this object alwyas returns false(2). When this object is
set to true(1), the PS MUST clear all the entries in the
cabhPriorityQosBpTable and cabhPriorityQosBpDestTable.
|
| cabhPriorityQosBpEntry |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1 |
|
List of all the discovered applications on a BP
and their priorities identified by the PS.
|
| cabhPriorityQosBpDestEntry |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1 |
|
List of Destination IP addresses and port numbers
for an application to which special Qos
priority is provisioned.
|
| cabhPriorityQosPsIfAttribEntry |
.1.3.6.1.4.1.4491.2.4.6.1.1.3.1.1 |
|
Number of media access priorities and number
of queues for each LAN interface in the
Residential Gateway. This table applies only
to interfaces through which data flows.
|
| Tabular Object |
| cabhPriorityQosMasterApplicationId |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.1.1.1 |
|
The IANA well-known port number identifying an application.
|
| cabhPriorityQosMasterDefaultCHPriority |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.1.1.2 |
|
The Qos priority assigned to the application.
|
| cabhPriorityQosMasterRowStatus |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.1.1.3 |
|
The Row Status interlock for creation and deletion
of row entries. The PS MUST NOT allow the NMS to
set RowStatus to notInService(2). The PS MUST assign a
RowStatus of notReady(3) to any new row created
without a valid value for both entries. The PS will
prevent modification of this table's columns and return
an inconsistentValue error if the NMS attempts to make
such modifications while RowStatus is active(1).
|
| cabhPriorityQosBpIpAddrType |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1.1 |
|
The type of the IP address assigned to a particular
BP element.
|
| cabhPriorityQosBpIpAddr |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1.2 |
|
The IP address assigned to a particular BP element.
|
| cabhPriorityQosBpApplicationId |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1.3 |
|
The IANA well-known port number assigned to a
particular application implemented on the
CableHome Host device in which this BP resides.
|
| cabhPriorityQosBpDefaultCHPriority |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1.4 |
|
The priority assigned to a particular application
implemented on CableHome Host device in which this
BP resides. The PS populates this entry according
to the Application Priority Master Table.
|
| cabhPriorityQosBpIndex |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1.1.5 |
|
The unique identifier for a particular row in the
BP Application Priority Table. This identifier is
used as an index into the 'nested' Destination
Priority Table.
|
| cabhPriorityQosBpDestIndex |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1.1 |
|
The locally unique index into the Destination
Priority Table.
|
| cabhPriorityQosBpDestIpAddrType |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1.2 |
|
The type of the Destination IP Address.
|
| cabhPriorityQosBpDestIpAddr |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1.3 |
|
The Destination IP address of the device to which
an application-session is established by a BP and
a special Qos priority is provisioned.
|
| cabhPriorityQosBpDestPort |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1.4 |
|
The port number on a IP device to which
an application-session is established by a BP and
a special Qos priority is provisioned.
|
| cabhPriorityQosBpDestIpPortPriority |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2.1.5 |
|
The Qos priority assigned to a particular
application-session (identified by destination IP
and Port) on a BP.
|
| cabhPriorityQosPsIfAttribIfNumPriorities |
.1.3.6.1.4.1.4491.2.4.6.1.1.3.1.1.1 |
|
The number of media access priorities supported
by this LAN interface.
|
| cabhPriorityQosPsIfAttribIfNumQueues |
.1.3.6.1.4.1.4491.2.4.6.1.1.3.1.1.2 |
|
The number of queues associated with this LAN
interface.
|
| Table |
| cabhPriorityQosMasterTable |
.1.3.6.1.4.1.4491.2.4.6.1.1.1.1 |
|
This table contains a list of mappings for Application
IDs to Default CableHome Priorities.
|
| cabhPriorityQosBpTable |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.1 |
|
This table contains the priorities for each of the
discovered CableHome Host (BP) applications
and related data.
|
| cabhPriorityQosBpDestTable |
.1.3.6.1.4.1.4491.2.4.6.1.1.2.2 |
|
This table contains the priorities based on
sessions established by a BP, identified by
destination IP address and port number. It
is indexed with a unique identifier for rows
in the BP Application Priority Table
(cabhPriorityQoSBpTable.
|
| cabhPriorityQosPsIfAttribTable |
.1.3.6.1.4.1.4491.2.4.6.1.1.3.1 |
|
This table contains the number of media
access priorities and number of queues associated
with each LAN interface in the Residential Gateway.
|
| Object Identifier |
| cabhQosMib |
.1.3.6.1.4.1.4491.2.4.6 |
|
This MIB module supplies parameters for the
configuration and monitoring of CableHome
prioritized QoS capability.
|
| cabhQosMibObjects |
.1.3.6.1.4.1.4491.2.4.6.1 |
| cabhPriorityQosMibObjects |
.1.3.6.1.4.1.4491.2.4.6.1.1 |
| cabhPriorityQosBase |
.1.3.6.1.4.1.4491.2.4.6.1.1.1 |
| cabhPriorityQosBp |
.1.3.6.1.4.1.4491.2.4.6.1.1.2 |
| cabhPriorityQosPs |
.1.3.6.1.4.1.4491.2.4.6.1.1.3 |
| cabhQosNotification |
.1.3.6.1.4.1.4491.2.4.6.2 |
| cabhPriorityQosNotification |
.1.3.6.1.4.1.4491.2.4.6.2.1 |
| cabhQosConformance |
.1.3.6.1.4.1.4491.2.4.6.3 |
| cabhPriorityQosConformance |
.1.3.6.1.4.1.4491.2.4.6.3.1 |
| cabhPriorityQosGroups |
.1.3.6.1.4.1.4491.2.4.6.3.1.1 |
| cabhPriorityQosCompliances |
.1.3.6.1.4.1.4491.2.4.6.3.1.2 |
| Group |
| cabhPriorityQosGroup |
.1.3.6.1.4.1.4491.2.4.6.3.1.1.1 |
|
Group of objects for CableHome Application
Priority MIB.
|
