You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-ADAPTER-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ADAPTER-MIB by vendor Cisco

CISCO-ADAPTER-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-ADAPTER-MIB.


Vendor: Cisco
Mib: CISCO-ADAPTER-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
CISCO-ADAPTER-MIB DEFINITIONS ::= BEGIN

-- Title:       Cisco Systems Adapter MIB in concise format
-- Date:        December 14, 1995
-- By:          Cal Palmore <palmore@cisco.com>

IMPORTS
        enterprises, IpAddress
                FROM RFC1155-SMI
        OBJECT-TYPE
                FROM RFC-1212
        DisplayString
                FROM RFC1213-MIB;

cisco               OBJECT IDENTIFIER ::= { enterprises 9 }
workgroup           OBJECT IDENTIFIER ::= { cisco 5 }

adapterCard         OBJECT IDENTIFIER ::= { workgroup 2 }


-- the adapter group

adptrNumber OBJECT-TYPE
        SYNTAX        INTEGER (1..10)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The number of Cisco network adapter cards in the
                      machine."
        ::= { adapterCard 1 }

-- the adapter table

adptrTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF AdptrEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "A list of adapter table entries.  The number of entries
                      is given by adptrNumber."
        ::= { adapterCard 2 }

adptrEntry OBJECT-TYPE
        SYNTAX        AdptrEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "An adapter table entry containing information about a
                      Cisco network adapter card."
        INDEX         { adptrIndex }
        ::= { adptrTable 1 }

AdptrEntry ::=
        SEQUENCE {
                adptrIndex
                        INTEGER,
                adptrType
                        INTEGER,
                adptrSerialNumber
                        INTEGER,
                adptrHwHiVersion
                        INTEGER,
                adptrHwLoVersion
                        INTEGER,
                adptrFwHiVersion
                        INTEGER,
                adptrFwLoVersion
                        INTEGER,
                adptrSwHiVersion
                        INTEGER,
                adptrSwLoVersion
                        INTEGER,
                adptrStatus
                        INTEGER,
                adptrSelfTestResult
                        INTEGER,
                adptrDriverHiVersion
                        INTEGER,
                adptrDriverLoVersion
                        INTEGER,
                adptrMediaType
                        INTEGER,
                adptrModel
                        DisplayString
        }

adptrIndex OBJECT-TYPE
        SYNTAX        INTEGER (1..10)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "A unique value for each Cisco adapter card in the
                      machine.  The value ranges between 1 and the value of
                      adptrNumber.  The value for each adapter card must
                      remain constant at least from one re-initialization
                      of the entity's network management system to the next
                      re-initialization."
        ::= { adptrEntry 1 }

adptrType OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),         -- none of the following
                                sBusCddi(2),      -- SBus CDDI Adapter
                                sBusFddiSt(3),    -- SBus FDDI Adapter/ST
                                sBusFddi(4),      -- SBus FDDI Adapter
                                mcaCddi(5),       -- MCA CDDI Adapter
                                mcaFddiSt(6),     -- MCA FDDI Adapter/ST
                                mcaFddi(7),       -- MCA FDDI Adapter
                                eisaCddi(8),      -- EISA CDDI Adapter
                                eisaFddi(10)      -- EISA FDDI Adapter
                                }
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The type of adapter card."
        ::= { adptrEntry 2 }

adptrSerialNumber OBJECT-TYPE
        SYNTAX        INTEGER (0..999999999)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The serial number of the adapter card."
        ::= { adptrEntry 3 }

adptrHwHiVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The high part of the hardware version of the adapter 
                      card.  For example, if the hardware version is 3.1, the 
                      value of adptrHwHiVersion is 3."
        ::= { adptrEntry 4 }

adptrHwLoVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The low part of the hardware version of the adapter 
                      card.  For example, if the hardware version is 3.1, the 
                      value of adptrHwLoVersion is 1."
        ::= { adptrEntry 5 }

adptrFwHiVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The high part of the firmware version of the adapter 
                      card.  For example, if the firmware version is 3.1, the 
                      value of adptrFwHiVersion is 3."
        ::= { adptrEntry 6 }

adptrFwLoVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The low part of the firmware version of the adapter 
                      card.  For example, if the firmware version is 3.1, the 
                      value of adptrFwLoVersion is 1."
        ::= { adptrEntry 7 }

adptrSwHiVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The high part of the software version number.  For 
                      example, if the software version is 3.1, the value of 
                      adptrSwHiVersion is 3."
        ::= { adptrEntry 8 }

adptrSwLoVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The low part of the software version number.  For 
                      example, if the software version is 3.1, the value of 
                      adptrSwLoVersion is 1."
        ::= { adptrEntry 9 }

adptrStatus OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),       -- none of the following
                                ok(2),          -- status ok
                                minorFault(3),  -- minor problem
                                majorFault(4)   -- major problem
                                }
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The operational status of the adapter card.  If the 
                      status is not ok(2), the value of adptrSelfTestResult 
                      gives more detailed information about the adapter card's
                      failure condition(s)."
        ::= { adptrEntry 10 }

adptrSelfTestResult OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The result of the adapter card's self test.  A zero 
                      indicates that the adapter passed all tests.  Bits set 
                      in the result indicate error conditions."
        ::= { adptrEntry 11 }

adptrDriverHiVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The high part of the driver version number.  For 
                      example, if the driver version is 3.1, the value of 
                      adptrDriverHiVersion is 3."
        ::= { adptrEntry 13 }

adptrDriverLoVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The low part of the driver version number.  For 
                      example, if the driver version is 3.1, the value of 
                      adptrDriverLoVersion is 1."
        ::= { adptrEntry 14 }

-- adptrEntry 15 unused
-- adptrEntry 16 unused

adptrMediaType OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),       -- none of the following
                                cddi(2),        -- CDDI (UTP FDDI)
                                fiber(3),       -- multimode fiber FDDI
                                tppmd(4),       -- ANSI standard UTP FDDI
                                mlt3(5),        -- MLT-3 UTP FDDI
                                sddi(6),        -- STP FDDI
                                smf(7)          -- single-mode fiber FDDI
                                }
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The type of physical layer medium dependent interface
                      on the adapter port(s)."
        ::= { adptrEntry 17 }

adptrModel OBJECT-TYPE
        SYNTAX        DisplayString (SIZE (0..8))
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The manufacturer's model number for the adapter."
        ::= { adptrEntry 18 }

-- the trap receiver table

adptrTrapReceiverTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF AdptrTrapReceiverEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "The adapter trap receiver table (0 to 10 entries).
                      This table lists the addresses of Network Management 
                      Stations that should receive trap messages from this
                      adapter when an exception condition occurs."
        ::= { adapterCard 3 }

adptrTrapReceiverEntry OBJECT-TYPE
        SYNTAX        AdptrTrapReceiverEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "A trap receiver table entry."
        INDEX         { adptrTrapReceiverAddr }
        ::= { adptrTrapReceiverTable 1 }

AdptrTrapReceiverEntry ::=
        SEQUENCE {
                adptrTrapReceiverType
                        INTEGER,
                adptrTrapReceiverAddr
                        IpAddress,
                adptrTrapReceiverComm
                        DisplayString
        }

adptrTrapReceiverType OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),       -- none of the following
                                invalid(2)      -- an invalid address
                                }
        ACCESS        read-write
        STATUS        mandatory
        DESCRIPTION   "Setting this object to invalid(2) removes the 
                      corresponding entry from the adptrTrapReceiverTable.  
                      To add a new entry to the adptrTrapReceiverTable, set
                      the adptrTrapReceiverAddr to an IpAddress which is not 
                      already in the table.  The adptrTrapReceiverType for 
                      that entry is automatically set to other(1)."
        ::= { adptrTrapReceiverEntry 1 }

adptrTrapReceiverAddr OBJECT-TYPE
        SYNTAX        IpAddress
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "IP address for trap receiver."
        ::= { adptrTrapReceiverEntry 2 }

adptrTrapReceiverComm OBJECT-TYPE
        SYNTAX        DisplayString (SIZE (0..20))
        ACCESS        read-write
        STATUS        mandatory
        DESCRIPTION   "Community string used for trap messages to this trap 
                      receiver."
        ::= { adptrTrapReceiverEntry 3 }

-- the community table

adptrCommunityTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF AdptrCommunityEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "The adapter community table (4 entries).  This table 
                      lists community strings and their access levels.  When 
                      an SNMP message is received by this adapter, the 
                      community string in the message is compared with this 
                      table to determine access rights of the sender."
        ::= { adapterCard 4 }

adptrCommunityEntry OBJECT-TYPE
        SYNTAX        AdptrCommunityEntry
        ACCESS        not-accessible
        STATUS        mandatory
        DESCRIPTION   "A community table entry."
        INDEX         { adptrCommunityAccess }
        ::= { adptrCommunityTable 1 }

AdptrCommunityEntry ::=
        SEQUENCE {
                adptrCommunityAccess
                        INTEGER,
                adptrCommunityString
                        DisplayString
        }

adptrCommunityAccess OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),       -- none of the following
                                readOnly(2),    -- read but not write all but 
                                                -- adptrCommunityTable
                                readWrite(3),   -- read and write all but 
                                                -- adptrCommunityTable
                                readWriteAll(4) -- read and write all
                                }
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "A value of readWriteAll(4) allows the community to 
                      read and write all objects in the MIB.  A value of 
                      readWrite(3) allows the community to read and write all 
                      objects except the adptrCommunityTable, which it cannot 
                      access at all.  A value of readOnly(2) allows the 
                      community to read all objects except the 
                      adptrCommunityTable.  A value of other(1) allows the 
                      community no access."
        ::= { adptrCommunityEntry 1 }

adptrCommunityString OBJECT-TYPE
        SYNTAX        DisplayString (SIZE (0..20))
        ACCESS        read-write
        STATUS        mandatory
        DESCRIPTION   "Configurable community string with access rights 
                      defined by the value of adptrCommunityAccess."
        ::= { adptrCommunityEntry 2 }

adptrMgmtType OBJECT-TYPE
        SYNTAX        INTEGER {
                                other(1),  -- none of the following
                                snmp(2),   -- Simple Network Management Protocol
                                smux(3)    -- SNMP MUX Protocol
                                }
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The type of network management for the adapter."
        ::= { adapterCard 5 }

adptrMgmtHiVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The high part of the network management version number.
                      For example, if the network management version is 3.1,
                      the value of adptrMgmtHiVersion is 3."
        ::= { adapterCard 6 }

adptrMgmtLoVersion OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        ACCESS        read-only
        STATUS        mandatory
        DESCRIPTION   "The low part of the network management version number.
                      For example, if the network management version is 3.1,
                      the value of adptrMgmtLoVersion is 1."
        ::= { adapterCard 7 }

END