You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-ATM-RM-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ATM-RM-MIB by vendor Cisco

CISCO-ATM-RM-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-ATM-RM-MIB.


Vendor: Cisco
Mib: CISCO-ATM-RM-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- 
-- *****************************************************************
-- C I S C O  A T M  R e s o u r c e  M a n a g e m e n t  M I B
--
-- December 1995, Michael Grobelch
--
-- Copyright (c) 1996-2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-ATM-RM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, 
    Counter32, Gauge32, Unsigned32   FROM SNMPv2-SMI 
    TEXTUAL-CONVENTION,DisplayString,
    TruthValue                       FROM SNMPv2-TC
    ifIndex                          FROM RFC1213-MIB
    ciscoExperiment                  FROM CISCO-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;

ciscoAtmRmMIB   MODULE-IDENTITY
    LAST-UPDATED "200206030000Z"
    ORGANIZATION "Cisco System Inc."
    CONTACT-INFO
            "           Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA
 
                   Tel: +1 800 553-NETS
 
                E-mail: cs-atm@cisco.com"
    DESCRIPTION
            "The MIB module which complements standard ATM MIBs for
             Cisco devices, for Resource Management."

    REVISION        "200206030000Z"
    DESCRIPTION
            "Added objects to support Per Class Overbooking for 
             ATM interfaces."

    REVISION        "200101290000Z"
    DESCRIPTION
            "Added a table that contains objects to manage ATM 
             Traffic Shaper configuration and state information
             for ATM interfaces."
    
    REVISION        "9912220000Z"
    DESCRIPTION
            "Fix the errors in the definition of cgrPerVcqAtmRmGroup."

    REVISION        "9907270000Z"
    DESCRIPTION
            "Added object to support overbooking of equivalent bandwidth
             of an ATM interface."

    REVISION        "9904300000Z"
    DESCRIPTION
            " Added objects for the IMA interface support."

    REVISION        "9904140000Z"
    DESCRIPTION
            "Added objects to instruct Connection Admission Control to
             include framing overhead in the calculation of maximum cell
             rate of an ATM interface."
    REVISION        "9903110000Z"
    DESCRIPTION
            "Clarified the description for some of the objects that they
             are applicable to logical port ATM interfaces too and made
             appropriate changes to the Compliance section."
    REVISION        "9811240000Z"
    DESCRIPTION
            "Added a table to manage global resources on the Catalyst8540MSR
            platform. This was necessary because the Catalyst8540MSR,
            has 8 switching modules internally, with each switching
            module having its own independent cell memory. Each
            switching module performs per-VC queueing for a specific
            (fixed in hardware) group of ports, independent of 
            any other switching module.

            The Lightstream 1010 had only one global cell memory
            for the entire device. "
    REVISION        "9811030000Z"
    DESCRIPTION
            "Specify a range limiting Link Distance object."
    REVISION        "9807260000Z"
    DESCRIPTION
            "Added an object to enable Hierarchical Scheduling."
    REVISION        "9712030000Z"
    DESCRIPTION
            "Added object to configure Service Category support on
             an interface." 
    REVISION        "9705260000Z"
    DESCRIPTION
            "Added objects for management of new features made possible
             on the LS1010 by the Feature Card Plus.  This includes 
             support for per-VC queueing hardware structures,
             enhanced UPC, non-zero MCR for ABR, and UBR+."
    REVISION        "9611110000Z"
    DESCRIPTION
            "Added objects for management of Cell Loss Ratio for
             CLP0+1 cell-streams. Added table for default tolerance."
    ::= { ciscoExperiment 10 }

--
-- Caution.  This MIB is temporary and experimental.
-- In the future willbe removed from products, 
-- perhaps with short notice, in favor of more standard
-- or generic MIBs.  Application developers should not
-- depend on long-term access to this MIB.
--

ciscoAtmRmMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmRmMIB 1 }

ForceValue ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to provide a standard mechanism
             for providing protection on writing to objects.
             An object of type ForceValue is associated with the
             protected object. If an set request is made for the 
             protected object, the state of the system or the
             value to be set may violate the intended protection.
             The value of the associated object of type ForceValue
             is then used to determine whether the set request
             succeeds or fails: 
                - value is forceChange, request succeeds.
                - value is noForceChange, request fails.
             An additional characteristic of the ForceValue type is
             that the setting of the protected object resets the
             value of the protection object to noForceChange. 
               As an example, take an object limiting the number of 
             network connections on an interface (named maxNetConn). 
             If maxNetConn is set below the number of currently active 
             connections, some of those connections will be cleared. 
             An associated protection object of type ForceValue 
             (named maxNetConnForce) is used to protect the setting 
             of maxNetConn. If the setting of maxNetConn would cause
             the clearing of connections, maxNetConnForce must
             be set to forceChange. Whenever maxNetConn is successfully
             set, maxNetConnForce assumes the value noForceChange."
    SYNTAX  INTEGER {
              forceChange(1), 
              noForceChange(2)
               }

FineQueueThreshold ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to represent thresholds for
             output-queues on a shared memory ATM switch."
    SYNTAX  INTEGER {
                    percent12(1),
                    percent25(2),
                    percent37(3),
                    percent50(4),
                    percent62(5),
                    percent75(6),
                    percent87(7),
                    percent100(8)
              }

LsPerVcqServiceClass ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to represent one of the
             Service Classes."
    SYNTAX     INTEGER {
                    c1(1),  -- Service class 1 (highest SP priority)
                    c2(2),  -- Service class 2 (2nd highest SP priority)
                    c3(3),  -- Service class 3
                    c4(4),  -- Service class 4
                    c5(5),  -- Service class 5 (lowest SP priority)
                    c6(6),  -- reserved
                    c7(7),  -- reserved
                    c8(8)   -- reserved
                   }

LsPerVcqServiceClassNoC1 ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to represent one of the
             Service Classes, omitting c1."
    SYNTAX     INTEGER {
                    c2(2),  -- Service class 2 (2nd highest SP priority)
                    c3(3),  -- Service class 3
                    c4(4),  -- Service class 4
                    c5(5),  -- Service class 5 (lowest SP priority)
                    c6(6),  -- reserved
                    c7(7),  -- reserved
                    c8(8)   -- reserved
                   }

LsPerVcqThresholdGroup ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to represent one of the
             Threshold Groups."
    SYNTAX     INTEGER {
                    tg1(1),  -- Threshold Group 1
                    tg2(2),  -- Threshold Group 2
                    tg3(3),  -- Threshold Group 3
                    tg4(4),  -- Threshold Group 4
                    tg5(5),  -- Threshold Group 5
                    tg6(6),  -- Threshold Group 6
                    tg7(7),  -- reserved
                    tg8(8),  -- reserved
                    tg9(9),  -- reserved
                    tg10(10), -- reserved
                    tg11(11), -- reserved
                    tg12(12), -- reserved
                    tg13(13), -- reserved
                    tg14(14), -- reserved
                    tg15(15), -- reserved
                    tg16(16)  -- reserved
                   }

LsPerVcqThresholdGroupService ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "This data type is used to specify how VC/VP
             queues are assigned to Threshold Groups."
    SYNTAX     INTEGER {
                    cbr(1),
                    vbrRt(2),
                    vbrNrt(3),
                    abr(4),
                    ubr(5) 
                   }

CgrPerVcqModuleId ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "The Catalyst8540MSR has 8 switching modules. Each
         module has its own cell memory, and performs 
         its own congestion control, independent  of
         the other switching modules."
    SYNTAX     INTEGER {
                   module1(1),
                   module2(2),
                   module3(3),
                   module4(4),
                   module5(5),
                   module6(6),
                   module7(7),
                   module8(8)
    }


-- This MIB defines the following Groups:
--
--    1. the ATM Switch Resource Management Configuration Group
--    2. the Shared-Memory architecture ATM Switch Resource Management Group
--    3. the ATM Interface Resource Management Configuration Group
--    4. the ATM Interface Resource Management State Group
--    5. the ATM Interface Resource Management Statistics Group
--    6. the Shared-Memory architecture ATM Interface Resource Management Group
--    7. the Lightstream per-VC queueing chipset ATM Switch Resource
--       Management Group
--    8. the Lightstream per-VC queueing switch chipset ATM Interface Resource
--       Management Group
--    9. The Catalyst8540MSR per-VC queueing chipset ATM Switch Resource
--       Management Group
--   10. The ATM Traffic Shaper Interface Management Group

ciscoAtmRmSwitchCfg       OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 1 }
ciscoAtmRmSwitchSharedMem OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 2 }
ciscoAtmRmIfCfg           OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 3 }
ciscoAtmRmIfState         OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 4 }
ciscoAtmRmIfStatistics    OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 5 }
ciscoAtmRmIfSharedMem     OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 6 }
ciscoLsPerVcqAtmRmSwitch   OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 7 }
ciscoLsPerVcqAtmRmIf       OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 8 }
ciscoCgrPerVcqAtmRmSwitch   OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 9 }
ciscoAtmRmTrafShaperIf OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 10 }

--
-- The ATM Switch Resource Management Configuration Group
--
rmSwitchOverSubFactor OBJECT-TYPE
    SYNTAX     INTEGER (1..32)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The Over Subscription Factor (OSF) is used on switch startup/OIR
             to determine the maximum sizes of VBR-NRT and ABR/UBR queues.
             In general, the larger the value of OSF specified, the
             larger the queues are made at startup.
             Denoting the maximum sizes of CBR,VBR-RT, VBR-NRT, and ABR/UBR
             output queues for a physical interface as L1, L2, L3, and L4,
             respectively, an example algorithm is:
                L3 = .25 * (OSF*(2048-L1 -L2)
                L4 = .75 * (OSF*(2048-L1 -L2)"
    DEFVAL { 4 }
    ::= { ciscoAtmRmSwitchCfg 1 }

rmSwitchScrMarginFactor OBJECT-TYPE
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The Sustained Cell Rate Margin Factor (SCRMF) is used in
             Connection Admission Control (CAC) of VBR connections to
             vary the weight given to the difference between Sustained
             Cell Rate (scr) and Peak Cell Rate (pcr) specified in the
             traffic contract. When calculating the equivalent bandwidth
             offered by a connection, SCRMF is used as follows:
                eqBw = scr + ((pcr - scr) * rcacVbrScrmf) / 100"
    DEFVAL { 1 }
    ::= { ciscoAtmRmSwitchCfg 2 }

rmSwitchAbrCongNotify   OBJECT-TYPE
    SYNTAX     INTEGER  {
                 relativeRate(1),
                 efci(2),
                 efciAndRelativeRate(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The ABR Congestion Notification object determines
             the type of congestion notification used on ABR connections
             in the switch. This notification can be done either via
             relative-rate or Explicit Forward Congestion Indication
             marking in ATM cells, or both."
    DEFVAL { relativeRate }
    ::= { ciscoAtmRmSwitchCfg 3 }

rmDefaultQosObjectiveTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmDefaultQosObjectiveEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             configuration information for default Quality of Service
             objective values used when a signalling request is received
             on a UNI interface."
    ::= { ciscoAtmRmSwitchCfg 4 }
 
rmDefaultQosObjectiveEntry OBJECT-TYPE
    SYNTAX     RmDefaultQosObjectiveEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             rmDefaultQosObjectiveTable containing Resource
             Management configuration for the default UNI QOS objectives.
             Rows are identified by Service Category."
    INDEX      { rmDefaultQosServiceCategory }
    ::= { rmDefaultQosObjectiveTable 1 }
 
RmDefaultQosObjectiveEntry ::= SEQUENCE {
    rmDefaultQosServiceCategory  INTEGER,
    rmScDefaultQosMaxCtd         INTEGER,
    rmScDefaultQosPeakToPeakCdv  INTEGER,
    rmScDefaultQosClr            INTEGER,
    rmScDefaultQosClrClp01       INTEGER
}
 
rmDefaultQosServiceCategory OBJECT-TYPE
    SYNTAX     INTEGER {
                    cbr(1),      --constant-bit-rate
                    vbrRt(2),    --variable-bit-rate-real-time
                    vbrNrt(3)    --variable-bit-rate-non-real-time
                   }
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Service Category to which the row applies."
    ::= { rmDefaultQosObjectiveEntry 1 }
 
rmScDefaultQosMaxCtd OBJECT-TYPE
    SYNTAX     INTEGER (0..16777215) 
    UNITS      "microseconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The default Maximum Cell Transfer Delay (ctd) for the
             Service Category. It applies only to cbr and vbr-rt Service
             Categories. Specifying a value of 16777215 signifies that
             this parameter should not be checked during connection setup.
             The units of this object are microseconds."
    DEFVAL { 16777215 }
    ::= { rmDefaultQosObjectiveEntry 2 }
 
rmScDefaultQosPeakToPeakCdv OBJECT-TYPE
    SYNTAX     INTEGER (0..16777215)
    UNITS      "microseconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The default Peak-to-peak cell delay variation (cdv) for
             the Service Category. It applies only to cbr and vbr-rt Service
             Categories. Specifying a value of 16777215 signifies
             that this parameter should not be checked during connection
             setup. The units of this object are microseconds."
    DEFVAL { 16777215 }
    ::= { rmDefaultQosObjectiveEntry 3 }
 
rmScDefaultQosClr     OBJECT-TYPE
    SYNTAX     INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The default cell-loss-ratio for the Service Category (for
             CLP=0 cells only). Specifying a value of 0 signifies that
             this parameter should not be checked during connection setup.
             The units of this object are negative powers of ten (so
             an object value of 8 means 10**(-8))."
    DEFVAL { 0 }
    ::= { rmDefaultQosObjectiveEntry 4 }

rmScDefaultQosClrClp01 OBJECT-TYPE
    SYNTAX     INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The default cell-loss-ratio for the Service Category for
             CLP=0+1 cells. Specifying a value of 0 signifies that
             this parameter should not be checked during connection setup.
             The units of this object are negative powers of ten (so
             an object value of 8 means 10**(-8))."
    DEFVAL { 0 }
    ::= { rmDefaultQosObjectiveEntry 5 }

--
-- The cisco ATM Switch Shared Memory Architecture Resource Management Group        
--
sharedMemRmSwitchQueuedCellTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF SharedMemRmSwitchQueuedCellEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             information on the cells in the output queues of a
             shared-memory output-queued ATM switch." 
    ::= { ciscoAtmRmSwitchSharedMem 1 }
 
sharedMemRmSwitchQueuedCellEntry OBJECT-TYPE
    SYNTAX     SharedMemRmSwitchQueuedCellEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             sharedMemRmSwitchQueuedCellTable containing Resource
             Management information on the cells in the output 
             queues of a shared-memory switch.  Rows are 
             indexed by priority."
    INDEX      { sharedMemRmCellPriority }
    ::= { sharedMemRmSwitchQueuedCellTable 1 }
 
SharedMemRmSwitchQueuedCellEntry ::= SEQUENCE {
    sharedMemRmCellPriority          INTEGER,
    sharedMemRmSwitchQueuedCellLimit INTEGER,
    sharedMemRmSwitchQueuedCellCount Gauge32   
}
 
sharedMemRmCellPriority OBJECT-TYPE
    SYNTAX     INTEGER {
                    p1(1),  -- Priority 1 (highest priority)
                    p2(2),  -- Priority 2 (2nd highest priority)
                    p3(3),  -- Priority 3 (3rd highest priority)
                    p4(4)   -- Priority 4 (lowest priority)
                   }
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The cell priority. The cell priority maps one-to-one to the
             per-interface queues specified by the sharedMemRmIfOutputQ
             object. All cells of a connection of a particular Service 
             Category are given a fixed priority. The Service Categories
             allocated to a priority can be determined by querying the 
             sharedMemRmIfOutputQServCategory object for any physical 
             interface on the switch."
    ::= { sharedMemRmSwitchQueuedCellEntry 1 }

sharedMemRmSwitchQueuedCellLimit OBJECT-TYPE
    SYNTAX     INTEGER (0..65535)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configured limit on the number of cells on all output queues 
             of the switch at any time of a particular priority."
    DEFVAL { 65535 } 
    ::= { sharedMemRmSwitchQueuedCellEntry 2 }

sharedMemRmSwitchQueuedCellCount OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "Count of the number of cells on all output queues 
             of the switch at any time of a particular priority."
    ::= { sharedMemRmSwitchQueuedCellEntry 3 }

--
-- The ATM Interface Resource Management Configuration Group
--
rmIfCfgTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmIfCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             configuration information for whole ATM interfaces."
    ::= { ciscoAtmRmIfCfg 3 }

rmIfCfgEntry OBJECT-TYPE
    SYNTAX     RmIfCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rmIfCfgTable
             containing Resource Management configuration for an ATM
            interface.  The particular interface is identified by the
            value of MIB-II's ifIndex."
    INDEX      { ifIndex }
    ::= { rmIfCfgTable 1 }

RmIfCfgEntry ::= SEQUENCE {
    rmIfOutPacingRateRequested       Unsigned32,
    rmIfOutPacingRateInstalled       Unsigned32,
    rmIfOutPacingForce               ForceValue,
    rmIfLinkDistance                 Unsigned32,
    rmIfBestEffortLimit              Unsigned32,
    rmIfCbrDefaultRxUpcTolerance     Unsigned32,
    rmIfVbrRtDefaultRxUpcTolerance   Unsigned32,
    rmIfVbrNrtDefaultRxUpcTolerance  Unsigned32,
    rmIfAbrDefaultRxUpcTolerance     Unsigned32,
    rmIfUbrDefaultRxUpcTolerance     Unsigned32,
    rmIfVbrRtDefaultRxUpcCdvt        Unsigned32,
    rmIfVbrNrtDefaultRxUpcCdvt       Unsigned32,
    rmIfServCategorySupport          INTEGER,
    rmIfFramingOverhead              TruthValue,
    rmIfFramingOverheadForce         ForceValue,
    rmIfOverBooking                  INTEGER,
    rmIfVbrRtPerClassOverbooking     INTEGER,
    rmIfVbrNrtPerClassOverbooking    INTEGER,
    rmIfAbrPerClassOverbooking       INTEGER,
    rmIfUbrPerClassOverbooking       INTEGER
}

rmIfOutPacingRateRequested OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "kilobits-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the
             state of pacing for this interface. If the value of this 
             object is 0, pacing is disabled on this interface. 
             Prior to any user configuration, the value of this object 
             is 0. If the value not 0, it represents the output pacing 
             value, in kilobits per second. The hardware is not capable 
             of providing all possible rates. The rate in place is available 
             in rmIfOutPacingRateInstalled. If the value specified would
             reduce the port rate below that currently allocated to 
             Guaranteed Service bandwidth for the output flow, 
             the rmIfOutPacingForce object must be set in conjunction with 
             this object in order to cause the change to take effect."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 1 }

rmIfOutPacingRateInstalled OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "kilobits-per-second"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The output pacing value, in kilobits per second, in effect. 
             A value of 0 indicates output pacing is disabled. 
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 2 }

rmIfOutPacingForce OBJECT-TYPE
    SYNTAX     ForceValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "A Set Request for rmIfOutPacingRateRequested that does not
             reduce the port rate below the currently allocated bandwidth
             guarantees for the output flow always succeeds irrespective
             of the value of rmIfOutPacingForce.  But a Set Request for
             rmIfOutPacingRateRequested that does reduce the port rate
             below the currently allocated bandwidth guarantees for the
             output flow will succeed only if rmIfOutPacingForce object
             is also set to the value forceChange. In either of the above
             cases, once rmIfOutPacingRateRequested object is set to the
             appropriate value, rmIfOutPacingForce object assumes the
             noForceChange value. This object is not instantiated for 
             interfaces to which it cannot be applied."
    DEFVAL { noForceChange }
    ::= { rmIfCfgEntry 3 }

rmIfLinkDistance     OBJECT-TYPE
    SYNTAX     Unsigned32 (0..65535)
    UNITS      "kilometers"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The link distance defined for the interface, expressed
             in kilometers. This is then divided by the speed of light
             to determine a propagation delay."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 4 }

rmIfBestEffortLimit OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The limit on the number of Best Effort connections that
             can be established on this interface. Note that a change
             to this value affects subsequent connection setup, not
             existing connections. A value of 4294967295 disables best-effort
             limits."
    DEFVAL { 4294967295 }
    ::= { rmIfCfgEntry 5 }

rmIfCbrDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the GCRA limit parameter used for policing
             of a receive cell-stream of a CBR connection on an interface,
             if the limit parameter is not specified explicitly in the
             connection setup request. It is specified
             in cell-times. Note that a change to this value affects
             subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 6 }
 
rmIfVbrRtDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum burst size parameter used for policing
             of a receive cell-stream of a VBR-RT connection on an
             interface, if this parameter is not specified
             explicitly in the connection setup request. It is
             specified in cell-times. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 7 }
 
rmIfVbrNrtDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum burst size parameter used for policing
             of a receive cell-stream of a VBR-NRT connection on an
             interface, if this parameter is not specified
             explicitly in the connection setup request. It is
             specified in cell-times. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 8 }
 
    rmIfAbrDefaultRxUpcTolerance  OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the GCRA limit parameter used for policing
             of a receive cell-stream of an ABR connection on an interface,
             if the limit parameter is not specified explicitly in the
             connection setup request. It is specified
             in cell-times. Note that a change to this value affects
             subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 9 }
 
    rmIfUbrDefaultRxUpcTolerance  OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the GCRA limit parameter used for policing
             of a receive cell-stream of a UBR connection on an interface,
             if the limit parameter is not specified explicitly in the
             connection setup request. It is specified
             in cell-times. Note that a change to this value affects
             subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 10 }

rmIfVbrRtDefaultRxUpcCdvt OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the GCRA limit parameter used for peak-rate
             policing of a receive cell-stream of a VBR-RT connection
             on an interface, if the CDVT parameter is not specified
             explicitly in the connection setup request. It is
             specified in cell-times. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 11 }

rmIfVbrNrtDefaultRxUpcCdvt OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the GCRA limit parameter used for peak-rate
             policing of a receive cell-stream of a VBR-NRT connection
             on an interface, if the CDVT parameter is not specified
             explicitly in the connection setup request. It is
             specified in cell-times. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 12 }

rmIfServCategorySupport OBJECT-TYPE
    SYNTAX     INTEGER (0..31)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The value of this object controls and reflects the
             Service Category(s) supported on this ATM interface.
 
             If a bit is set, the corresponding Service Category
             is supported on the interface, and CAC will allow
             such connections. If a bit is reset, the corresponding
             Service Category is not supported on the interface,
             and CAC will reject such connections.
 
             Write access may not be supported on all interfaces. 
             Not all Service Categories may be supported on
             an interface. For example, mixing of Service
             Categories may not be allowed on a VP tunnel
             interface. 
 
                 The various bit positions are:
                  1    constant bit rate (cbr)
                  2    variable bit rate-real time (vbr-rt)
                  4    variable bit rate-non real time (vbr-nrt)
                  8    available bit rate (abr)
                 16    unspecified bit rate (ubr)"
    ::= { rmIfCfgEntry 13 }

rmIfFramingOverhead OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "If this object is set to true, framing overhead will be taken
             into account in determining the Maximum Cell Rate that is
             possible on this interface. If this object is set to false,
             framing overhead will not figure in the determination of the
             Maximum Cell Rate that is possible on this interface. If
             setting the value of this object to true results in reducing
             the Maximum Guaranteed Services Bandwidth of this interface 
             below the currently allocated bandwidth guarantees on this 
             interface, the object rmIfFramingOverheadForce must also be 
             set in order to cause the change to take effect. This object is
             not instantiated for interfaces to which it cannot be applied."
    DEFVAL { false }
    ::= { rmIfCfgEntry 14 }

rmIfFramingOverheadForce OBJECT-TYPE
    SYNTAX     ForceValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "A Set Request for rmIfFramingOverhead that does not reduce
             the Maximum Guaranteed Services Bandwidth of this interface
             below the currently allocated bandwidth guarantees always
             succeeds irrespective of the value of rmIfFramingOverheadForce.
             But a Set Request for rmIfFramingOverhead that does reduce the
             Maximum Guaranteed Services Bandwidth of this interface below
             the currently allocated bandwidth guarantees will succeed only
             if rmIfFramingOverheadForce object is also set to the value
             forceChange.  In either of the above cases, once the
             rmIfFramingOverhead object is set to the appropriate value,
             rmIfFramingOverheadForce object assumes the noForceChange 
             value.  This object is not instantiated for interfaces to
             which it cannot be applied."
    DEFVAL { noForceChange }
    ::= { rmIfCfgEntry 15 }

rmIfOverBooking OBJECT-TYPE
    SYNTAX     INTEGER (100..1000) 
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies overbooking on this interface as
             a percentage of the Maximum Cell Rate that is possible
             on this interface. If the value of this object is 100,
             overbooking is disabled on this interface. A set request
             for this object will succeed only if the value of the
             ifAdminStatus object for this interface is 'down'. 
             This object is not instantiated for interfaces to which 
             it cannot be applied."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 16 }

rmIfVbrRtPerClassOverbooking OBJECT-TYPE
    SYNTAX     INTEGER (100..3200)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Per Class Overbooking 
             percentage for VBR-rt service category on this 
             interface. If the value of this object is 100, 
             Per Class Overbooking for VBR-rt is disabled on this 
             interface. Specifying a value that is greater than 100 
             causes the CAC to scale down the bandwidth allocated to
             a VBR-rt VC on this interface by a factor that is equal 
             to the inverse of the overbooking percentage specified by 
             this object. A set request for this object will succeed 
             only if the value of the ifAdminStatus object for this 
             interface is 'down' and Interface overbooking 
             (rmIfOverBooking object) is disabled. A set request for 
             this object will not succeed if it specifies a value
             that would cause the current bandwidth guarantees on 
             this interface to exceed the maximum bandwidth available 
             for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 17 }

rmIfVbrNrtPerClassOverbooking OBJECT-TYPE
    SYNTAX     INTEGER (100..3200)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Per Class Overbooking
             percentage for VBR-Nrt service category on this
             interface. If the value of this object is 100,
             Per Class Overbooking for VBR-Nrt is disabled on this
             interface. Specifying a value that is greater than 100
             causes the CAC to scale down the bandwidth allocated to
             a VBR-Nrt VC on this interface by a factor that is equal
             to the inverse of the overbooking percentage specified by
             this object. A set request for this object will succeed
             only if the value of the ifAdminStatus object for this
             interface is 'down' and Interface overbooking
             (rmIfOverBooking object) is disabled. A set request for
             this object will not succeed if it specifies a value
             that would cause the current bandwidth guarantees on
             this interface to exceed the maximum bandwidth available
             for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 18 }

rmIfAbrPerClassOverbooking OBJECT-TYPE
    SYNTAX     INTEGER (100..3200)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Per Class Overbooking
             percentage for ABR service category on this
             interface. If the value of this object is 100,
             Per Class Overbooking for ABR is disabled on this
             interface. Specifying a value that is greater than 100
             causes the CAC to scale down the bandwidth allocated to
             a ABR VC on this interface by a factor that is equal
             to the inverse of the overbooking percentage specified by
             this object. A set request for this object will succeed
             only if the value of the ifAdminStatus object for this
             interface is 'down' and Interface overbooking
             (rmIfOverBooking object) is disabled. A set request for
             this object will not succeed if it specifies a value
             that would cause the current bandwidth guarantees on
             this interface to exceed the maximum bandwidth available
             for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 19 }

rmIfUbrPerClassOverbooking OBJECT-TYPE
    SYNTAX     INTEGER (100..3200)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Per Class Overbooking
             percentage for UBR service category on this
             interface. If the value of this object is 100,
             Per Class Overbooking for UBR is disabled on this
             interface. Specifying a value that is greater than 100
             causes the CAC to scale down the bandwidth allocated to
             a UBR VC on this interface by a factor that is equal
             to the inverse of the overbooking percentage specified by
             this object. A set request for this object will succeed
             only if the value of the ifAdminStatus object for this
             interface is 'down' and Interface overbooking
             (rmIfOverBooking object) is disabled. A set request for
             this object will not succeed if it specifies a value
             that would cause the current bandwidth guarantees on
             this interface to exceed the maximum bandwidth available
             for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 20 }

rmIfDirectionCfgTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmIfDirectionCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             configuration information for a single direction of
             traffic flow on ATM interfaces."
    ::= { ciscoAtmRmIfCfg 4 }

rmIfDirectionCfgEntry OBJECT-TYPE
    SYNTAX     RmIfDirectionCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rmIfInOutCfgTable
             containing Resource Management configuration for a
             traffic direction on an ATM interface.  The particular
             interface is identified by the value of MIB-II's ifIndex,
             and the direction of flow."
    INDEX      { ifIndex, rmIfDirection }
    ::= { rmIfDirectionCfgTable 1 }

RmIfDirectionCfgEntry ::= SEQUENCE {
    rmIfDirection                   INTEGER,
    rmIfDirControlLinkShareMaxAgg   INTEGER,
    rmIfDirControlLinkShareMinCbr   INTEGER,
    rmIfDirControlLinkShareMaxCbr   INTEGER,
    rmIfDirControlLinkShareMinVbr   INTEGER,
    rmIfDirControlLinkShareMaxVbr   INTEGER,
    rmIfDirMaxCbrPcr                Unsigned32,
    rmIfDirMaxCbrTolerance          Unsigned32,
    rmIfDirMaxVbrPcr                Unsigned32,
    rmIfDirMaxVbrScr                Unsigned32,
    rmIfDirMaxVbrTolerance          Unsigned32,
    rmIfDirMaxAbrPcr                Unsigned32,
    rmIfDirMaxAbrTolerance          Unsigned32,
    rmIfDirMaxUbrPcr                Unsigned32,
    rmIfDirMaxUbrTolerance          Unsigned32,
    rmIfDirMaxAbrMcr                Unsigned32,
    rmIfDirMaxUbrMcr                Unsigned32,
    rmIfDirMaxVbrCdvt               Unsigned32,
    rmIfDirControlLinkShareMinAbr   INTEGER,
    rmIfDirControlLinkShareMaxAbr   INTEGER,
    rmIfDirControlLinkShareMinUbr   INTEGER,
    rmIfDirControlLinkShareMaxUbr   INTEGER
}

rmIfDirection   OBJECT-TYPE
    SYNTAX     INTEGER {
                    receive(1),
                    transmit(2)
                   }
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "Selects the traffic direction for which subsequent row
             parameters are read or written. In is received from
             the port(into the device), Out is transmitted to the
             port (from the device)."
    ::= { rmIfDirectionCfgEntry 1 }

rmIfDirControlLinkShareMaxAgg OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies the maximum aggregate Guaranteed Service
             (CBR or VBR) traffic that can be allocated in a
             traffic direction on an interface. It is expressed
             as a percentage of the maximum traffic direction's
             bandwidth (applies after output pacing, for example).
             This object interacts with MaxVbr (if specified) such
             that MaxVbr <= MaxAgg. 
             This object interacts with MaxCbr (if specified) such
             that MaxCbr <= MaxAgg. 
             This object interacts with MaxAbr (if specified) such
             that MaxAbr <= MaxAgg.
             This object interacts with MaxUbr (if specified) such
             that MaxUbr <= MaxAgg.
             Note that a change to this value affects subsequent
             connection setup, not existing connections.
             If the object is set to -1, the object is considered
             to be unspecified.
             This object is not instantiated for interfaces to which it
             cannot be applied." 
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 2 }

rmIfDirControlLinkShareMinCbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies a minimum amount of CBR traffic that can
             be reserved in a traffic direction on an interface.
             It is expressed as a percentage of the maximum traffic
             direction's bandwidth (applies after output pacing,
             for example).
             This object interacts with MinVbr, MinAbr, MinUbr
             (if specified) such that
              MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
             This object interacts with MaxCbr (if specified) such that
             MinCbr < MaxCbr.
             Note that a change to this value affects subsequent
             connection setup, not existing connections. If the object
             is set to -1, the object is considered to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 3 }

rmIfDirControlLinkShareMaxCbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies the maximum CBR traffic that can be allocated
             in a traffic direction on an interface. It is expressed
             as a percentage of the maximum traffic direction's
             bandwidth (applies after output pacing, for example).
             This object interacts with MinCbr (if specified) such that
             MinCbr <= MaxCbr.
             This object interacts with MaxAgg (if specified) such
             that MaxCbr <= MaxAgg.
             Note that a change to this value affects subsequent
             connection setup, not existing connections. This object is
             not instantiated for interfaces to which it cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 4 }

rmIfDirControlLinkShareMinVbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies a minimum amount of VBR traffic that can
             be reserved in a traffic direction on an interface.
             It is expressed as a percentage of the maximum traffic
             direction's bandwidth (applies after output pacing,
             for example).
             This object interacts with MinCbr, MinAbr, and MinUbr
             (if specified), such that
              MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
             This object interacts with MaxVbr (if specified) such that
             MinVbr <= MaxVbr.
             Note that a change to this value affects subsequent 
             connection setup, not existing connections. If the object 
             is set to -1, the object is considered to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 5 }

rmIfDirControlLinkShareMaxVbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies the maximum VBR traffic that can be allocated
             in a traffic direction on an interface. It is expressed
             as a percentage of the maximum traffic direction's
             bandwidth (applies after output pacing, for example).
             This object interacts with MinVbr (if specified) such that
             MinVbr <= MaxVbr.
             This object interacts with MaxAgg (if specified) such
             that MaxVbr <= MaxAgg.
             Note that a change to this value affects subsequent
             connection setup, not existing connections.
             If the object is set to -1, the object is considered
             to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 6 }

rmIfDirMaxCbrPcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Peak-cell-rate (pcr) traffic
             parameter that can be specified for CBR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second. A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 7 }

rmIfDirMaxCbrTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum limit parameter used in the GCRA
             algorithm for traffic policing that can be specified
             for CBR connections in a traffic direction on an interface.
             It is specified in cell-times.  A value of 4294967295 disables 
             checking of this parameter limit. Note that a change to this
             value affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 8 }

rmIfDirMaxVbrPcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Peak-cell-rate (pcr) traffic
             parameter that can be specified for VBR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second.  A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 9 }

rmIfDirMaxVbrScr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Sustained-cell-rate (scr) traffic
             parameter that can be specified for VBR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second.  A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 10 }

rmIfDirMaxVbrTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum limit parameter used in the GCRA
             algorithm for traffic policing that can be specified
             for VBR connections in a traffic direction on an interface.
             It is specified in cell-times.  A value of 4294967295 disables 
             checking of this parameter limit. Note that a change to this
             value affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 11 }

rmIfDirMaxAbrPcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Peak-cell-rate (pcr) traffic
             parameter that can be specified for ABR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second.  A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 12 }

rmIfDirMaxAbrTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum limit parameter used in the GCRA
             algorithm for traffic policing that can be specified
             for ABR connections in a traffic direction on an interface.
             It is specified in cell-times.  A value of 4294967295 disables 
             checking of this parameter limit. Note that a change to this
             value affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 13 }

rmIfDirMaxUbrPcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Peak-cell-rate (pcr) traffic
             parameter that can be specified for UBR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second.  A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 14 }

rmIfDirMaxUbrTolerance OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum limit parameter used in the GCRA
             algorithm for traffic policing that can be specified
             for UBR connections in a traffic direction on an interface.
             It is specified in cell-times.  A value of 4294967295 disables 
             checking of this parameter limit. Note that a change to this
             value affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 15 }

rmIfDirMaxAbrMcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Minimum-cell-rate (mcr) traffic
             parameter that can be specified for ABR connections
             in a traffic direction on an interface. It is specified
             in cells-per-second.  A value of 4294967295 disables checking
             of this parameter limit. Note that a change to this value
             affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 16 }

rmIfDirMaxUbrMcr OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cells-per-second"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum Minimum-cell-rate (mcr) traffic
             parameter that can be specified for UBR plus (UBR with
             an mcr guaranteed) connections in a traffic direction on
             an interface. It is specified in cells-per-second.  A
             value of 4294967295 disables checking of this parameter
             limit. Note that a change to this value affects subsequent
             connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 17 }

rmIfDirMaxVbrCdvt OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "cell-times"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Specifies the maximum peak-rate CDVT parameter used in
             the GCRA algorithm for traffic policing that can be specified
             for VBR connections in a traffic direction on an interface.
             It is specified in cell-times.  A value of 4294967295 disables
             checking of this parameter limit. Note that a change to this
             value affects subsequent connection setup, not existing
             connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 18 }

rmIfDirControlLinkShareMinAbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies a minimum amount of ABR traffic that can
             be reserved in a traffic direction on an interface.
             It is expressed as a percentage of the maximum traffic
             direction's bandwidth (applies after output pacing,
             for example).
             This object interacts with MinVbr, MinCbr, and MinUbr
             (if specified) such that:
               MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
             This object interacts with MaxAbr (if specified) such that
             MinAbr < MaxAbr.
             Note that a change to this value affects subsequent
             connection setup, not existing connections. If the object
             is set to -1, the object is considered to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 19 }

rmIfDirControlLinkShareMaxAbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies the maximum ABR traffic that can be allocated
             in a traffic direction on an interface. It is expressed
             as a percentage of the maximum traffic direction's
             bandwidth (applies after output pacing, for example).
             This object interacts with MinAbr (if specified) such that
               MinAbr <= MaxAbr.
             This object interacts with MaxAgg (if specified) such
             that MaxAbr <= MaxAgg.
             Note that a change to this value affects subsequent
             connection setup, not existing connections.
             If the object is set to -1, the object is considered
             to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 20 }

rmIfDirControlLinkShareMinUbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies a minimum amount of UBR plus (UBR with
             an mcr guaranteed) traffic that can be reserved in a
             traffic direction on an interface.  It is expressed as
             a percentage of the maximum traffic direction's bandwidth
             (applies after output pacing, for example).
             This object interacts with MinVbr, MinCbr, and
             MinAbr (if specified)
             such that:
               MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
             This object interacts with MaxUbr (if specified) such that
             MinUbr < MaxUbr.
             Note that a change to this value affects subsequent
             connection setup, not existing connections. If the object
             is set to -1, the object is considered to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 21 }

rmIfDirControlLinkShareMaxUbr OBJECT-TYPE
    SYNTAX     INTEGER (-1..95)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configuration in the Controller Link Sharing (CLS) scheme.
             Specifies the maximum UBR plus traffic that can be allocated
             in a traffic direction on an interface. It is expressed
             as a percentage of the maximum traffic direction's
             bandwidth (applies after output pacing, for example).
             This object interacts with MinUbr (if specified) such that
               MinUbr <= MaxUbr.
             This object interacts with MaxAgg (if specified) such
             that MaxUbr <= MaxAgg.
             Note that a change to this value affects subsequent
             connection setup, not existing connections.
             If the object is set to -1, the object is considered
             to be unspecified.
             This object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 22 }


--
-- The ATM Interface Resource Management State Group
--
rmIfServiceCategoryStateTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmIfServiceCategoryStateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             state information for ATM interfaces by Service Category."
    ::= { ciscoAtmRmIfState 1 }
 
rmIfServiceCategoryStateEntry OBJECT-TYPE
    SYNTAX     RmIfServiceCategoryStateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             rmIfServiceCategoryStateTable containing Resource
             Management configuration for an ATM interface. Rows
             are identified by the value of MIB-II's ifIndex, and
             the Service Category."
    INDEX      { ifIndex, rmIfSc }
    ::= { rmIfServiceCategoryStateTable 1 }
 
RmIfServiceCategoryStateEntry ::= SEQUENCE {
    rmIfSc                       INTEGER,
    rmIfScRxAcr                  Gauge32,
    rmIfScTxAcr                  Gauge32,
    rmIfScRxAlcr                 Gauge32,
    rmIfScTxAlcr                 Gauge32,
    rmIfScNumSvxConns            Gauge32,
    rmIfScNumPvxConns            Gauge32,
    rmIfScTxMaxCtd               Gauge32,
    rmIfScTxP2PeakCdv            Gauge32,
    rmIfScTxClr                  Gauge32,
    rmIfScTxClrClp01             Gauge32,
    rmIfScRxDynBwSvcAcr          Gauge32,
    rmIfScTxDynBwSvcAcr          Gauge32
}
 
rmIfSc OBJECT-TYPE
    SYNTAX     INTEGER {
                    cbr(1),      --constant-bit-rate
                    vbrRt(2),    --variable-bit-rate-real-time
                    vbrNrt(3),   --variable-bit-rate-non-real-time
                    abr(4),      --available-bit-rate
                    ubr(5)       --unspecified-bit-rate
                   }
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Service Category to which the row applies."
    ::= { rmIfServiceCategoryStateEntry 1 }
 
rmIfScRxAcr OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells-per-second"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Available Cell Rate (specified in cells per second) for
             traffic received on the interface for this Service Category.
             This is the bandwidth available for connections. For
             CBR and VBR Service Categories, this value decreases as a
             result of connection setup and increases as a result of
             connection release. For ABR and UBR Service Categories,
             this value changes as a result of connection setup
             and teardown only if non-zero mcr is specified.."
    ::= { rmIfServiceCategoryStateEntry 2 }
 
rmIfScTxAcr OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells-per-second"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Available Cell Rate (specified in cells per second) for
             traffic sent out the interface for this Service Category.
             This is the bandwidth available for connections. For
             CBR and VBR Service Categories, this value decreases as a
             result of connection setup and increases as a result of
             connection release. For ABR and UBR Service Categories,
             this value changes as a result of connection setup
             and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 3 }
 
rmIfScRxAlcr OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells-per-second"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Allocated Cell Rate (specified in cells per second) for
             traffic received on the interface for this Service Category.
             This is the bandwidth allocated-to connections. For
             CBR and VBR Service Categories, this value increases as a
             result of connection setup and decreases as a result of
             connection release. For ABR and UBR Service Categories,
             this value changes as a result of connection setup
             and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 4 }
 
rmIfScTxAlcr OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells-per-second"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Allocated Cell Rate (specified in cells per second) for
             traffic sent out the interface for this Service Category.
             This is the bandwidth allocated-to connections. For
             Guaranteed Service Categories, this value increases as a
             result of connection setup and decreases as a result of
             connection release. For ABR and UBR Service Categories,
             this value changes as a result of connection setup
             and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 5 }
 
rmIfScNumSvxConns OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "number of connections"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of signalled connections (VC or VP) of this
             Service Category currently allocated on the interface."
    ::= { rmIfServiceCategoryStateEntry 6 }
 
rmIfScNumPvxConns OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "number of connections"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of permanent connections (VC or VP) of this
             Service Category currently allocated on the interface."
    ::= { rmIfServiceCategoryStateEntry 7 }
 
rmIfScTxMaxCtd    OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "microseconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The maximum Cell Transfer Delay estimated to be experienced by
             cells of connections transmitted out this interface of this
             Service Category.  This is estimate does not distinguish between
             clp0 and clp1 cells.  This object is valid for Service Category 
             cbr and vbr-rt. For other Service Categories, the object is not 
             defined."
    ::= { rmIfServiceCategoryStateEntry 8 }
 
rmIfScTxP2PeakCdv      OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "microseconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Peak-to-Peak Cell Delay Variation estimated to be experienced
             by cells of connections transmitted out this interface of this
             Service Category.  This estimate does not distinguish between 
             clp0 and clp1 cells.  This object is valid for Service Categories 
             cbr and  vbr-rt. For other Service Categories, the object is not 
             defined."
    ::= { rmIfServiceCategoryStateEntry 9 }
 
rmIfScTxClr        OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Cell Loss Ratio estimated to be experienced by cells
             of connections transmitted out this interface of this Service
             Category.  This is an estimate for clp0 cells only.  The unit of 
             this object is negative power of ten (so an object value of 8 
             means 10**(-8)). This object is valid for Service Categories cbr, 
             vbr-rt, and vbr-nrt. For other Service Categories, the object is 
             not defined."
    ::= { rmIfServiceCategoryStateEntry 10 }

rmIfScTxClrClp01    OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Cell Loss Ratio estimated to be experienced by cells
             of connections transmitted out this interface of this Service
             Category.  This is an estimate for clp0+1 cells.  The unit of 
             this object is negative power of ten (so an object value of 8 
             means 10**(-8)). This object is valid for Service Categories cbr, 
             vbr-rt, and vbr-nrt. For other Service Categories, the object is 
             not defined."
    ::= { rmIfServiceCategoryStateEntry 11 }

rmIfScRxDynBwSvcAcr OBJECT-TYPE
       SYNTAX  Gauge32
       UNITS   "cells-per-second"
       MAX-ACCESS read-only
       STATUS  current
       DESCRIPTION
            "The Available Cell Rate (specified in cells per second) for traffic
             received on the interface for this Service Category.  This object 
             is valid only for IMA physical interfaces.  This is the bandwidth 
             available for SVC connections.  For CBR and VBR Service Categories,
             this value decreases as a result of connection setup and increases 
             as a result of connection release.  For ABR and UBR Service 
             Categories, this value changes as a result of connection setup and 
             teardown only if non-zero mcr is specified"
       ::= { rmIfServiceCategoryStateEntry 12 }

rmIfScTxDynBwSvcAcr OBJECT-TYPE
       SYNTAX  Gauge32
       UNITS   "cells-per-second"
       MAX-ACCESS read-only
       STATUS  current
       DESCRIPTION
            "The Available Cell Rate (specified in cells per second) for traffic
             transmitted on the interface for this Service Category.  This 
             object is valid only for IMA physical interfaces.  This is the 
             bandwidth available for SVC connections on physical interfaces.  
             For CBR and VBR Service Categories, this value decreases as a 
             result of connection setup and increases as a result of connection 
             release.  For ABR and UBR Service Categories, this value changes as
             a result of connection setup and teardown only if non-zero mcr is 
             specified"
       ::= { rmIfServiceCategoryStateEntry 13 }



--
-- The ATM Interface Resource Management Statistics Group
--
rmIfServiceCategoryStatisticsTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmIfServiceCategoryStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing Resource Management
             statistics information for ATM interfaces by Service Category."
    ::= { ciscoAtmRmIfStatistics 1 }
 
rmIfServiceCategoryStatisticsEntry OBJECT-TYPE
    SYNTAX     RmIfServiceCategoryStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             rmIfServiceCategoryStatisticsTable containing Resource
             Management configuration for an ATM interface. Rows
             are identified by the value of MIB-II's ifIndex, and
             the Service Category."
    INDEX      { ifIndex, rmIfSc }
    ::= { rmIfServiceCategoryStatisticsTable 1 }
 
RmIfServiceCategoryStatisticsEntry ::= SEQUENCE {
    rmIfScRcacResultNumAdmit          Counter32,
    rmIfScRcacResultNumTotalRequests  Counter32,
    rmIfScRcacResultNumFailTraffComb  Counter32,
    rmIfScRcacResultNumFailBw         Counter32,
    rmIfScRcacResultNumFailLoss       Counter32,
    rmIfScRcacResultNumFailDelay      Counter32,
    rmIfScRcacResultNumFailCdv        Counter32,
    rmIfScRcacResultNumFailBeLimit    Counter32,
    rmIfScRcacResultNumFailParmLimit  Counter32,
    rmIfScRcacResultNumFailOther      Counter32
}

rmIfScRcacResultNumAdmit OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of successful resource allocation requests for this
             interface."
    ::= { rmIfServiceCategoryStatisticsEntry 1 }
 
rmIfScRcacResultNumTotalRequests OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The total number of resource allocation requests for this
             interface."
    ::= { rmIfServiceCategoryStatisticsEntry 2 }
 
rmIfScRcacResultNumFailTraffComb OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to an unsupported combination of traffic
             parameters. An example of this would be, for a VBR connection,
             a zero maximum burst-size given a non-zero sustainable-cell-rate."
    ::= { rmIfServiceCategoryStatisticsEntry 3 }
 
rmIfScRcacResultNumFailBw OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to a lack of bandwidth. This will never
             occur for Best Effort Service Categories."
    ::= { rmIfServiceCategoryStatisticsEntry 4 }
 
rmIfScRcacResultNumFailLoss OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to exceeding cell loss criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 5 }
 
rmIfScRcacResultNumFailDelay OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to exceeding maximum delay criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 6 }
 
rmIfScRcacResultNumFailCdv OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to exceeding cell delay variation criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 7 }
 
rmIfScRcacResultNumFailBeLimit OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to exceeding a limit on the number of
             Best-Effort connections."
    ::= { rmIfServiceCategoryStatisticsEntry 8 }
 
rmIfScRcacResultNumFailParmLimit OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error due to exceeding a traffic parameter limit 
             criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 9 }
 
rmIfScRcacResultNumFailOther OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of resource allocation requests which are considered
             to be in error for a reason not enumerated by other counter
             objects."
    ::= { rmIfServiceCategoryStatisticsEntry 10 }
 
--
-- The Shared-Memory architecture ATM Interface Resource Management Group
--
sharedMemRmIfOutputQCfgTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF SharedMemRmIfOutputQCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing configuration information
             for ATM physical interface output queues. This table is not 
             instantiated for interfaces to which it cannot be applied."
    ::= { ciscoAtmRmIfSharedMem 1 }

sharedMemRmIfOutputQCfgEntry OBJECT-TYPE
    SYNTAX     SharedMemRmIfOutputQCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the sharedMemRmIfOutputQCfgTable
             containing Resource Management configuration for an ATM
             interface.  A particular row is identified by the
             value of MIB-II's ifIndex, and the output queue."
    INDEX      { ifIndex, sharedMemRmIfOutputQ }
    ::= { sharedMemRmIfOutputQCfgTable 1 }

SharedMemRmIfOutputQCfgEntry ::= SEQUENCE {
    sharedMemRmIfOutputQ                 INTEGER,
    sharedMemRmIfOutputQServCategory     INTEGER,
    sharedMemRmIfOutputQRequestedMaxSize INTEGER,
    sharedMemRmIfOutputQInstalledMaxSize INTEGER,
    sharedMemRmIfOutputQMaxSizeForce     ForceValue,
    sharedMemRmIfOutputQCellCount        Gauge32
}

sharedMemRmIfOutputQ OBJECT-TYPE
    SYNTAX     INTEGER {
                    q1(1),  -- Priority 1 queue (highest priority)
                    q2(2),  -- Priority 2 queue (2nd highest priority)
                    q3(3),  -- Priority 3 queue (3rd highest priority)
                    q4(4)   -- Priority 4 queue (lowest priority)
                   }
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The output queue on this ATM interface."
    ::= { sharedMemRmIfOutputQCfgEntry 1 }

sharedMemRmIfOutputQServCategory OBJECT-TYPE
    SYNTAX     INTEGER (1..31)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The service category(s) sharing this output queue on
             this ATM interface.
                 The various bit positions are:
                  1    constant bit rate (cbr)
                  2    variable bit rate-real time (vbr-rt)
                  4    variable bit rate-non real time (vbr-nrt)
                  8    available bit rate (abr)
                 16    unspecified bit rate (ubr)"
    ::= { sharedMemRmIfOutputQCfgEntry 2 }

sharedMemRmIfOutputQRequestedMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (0..65504)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the 
             maximum number of cells that may occupy this queue. 
             If the value of this object is 0, the maximum size in effect
             is a default value calculated by software.
             Prior to any user configuration, the value of this object 
             is 0. The actual maximum size is reflected in the object
             sharedMemRmIfOutputQInstalledMaxSize (and is a default value 
             calculated by software).  Setting this value to 0 causes the 
             size to assume it's default value. When changing a port that 
             is up, must be set in conjunction with the force object
             (sharedMemRmIfOutputQMaxSizeForce) to take effect." 
    DEFVAL { 0 }
    ::= { sharedMemRmIfOutputQCfgEntry 3 }

sharedMemRmIfOutputQInstalledMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (32..65504)
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The maximum number of cells that may occupy this queue.
             Will be a multiple of 32. Explicit configuration of maximum
             size are made via the object sharedMemrmIfOutputQRequestedMaxSize.
             Such requests are rounded up to the nearest multiple of 32
             prior to installation." 
    ::= { sharedMemRmIfOutputQCfgEntry 4 }

sharedMemRmIfOutputQMaxSizeForce OBJECT-TYPE
    SYNTAX     ForceValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Must be set to forceChange to allow changing of
             sharedMemRmIfOutputQRequestedMaxSize for a queue on an 
             interface that is 'up'. This is because such a change 
             causes the interface to lose data while the size is 
             changed. Once the change takes place, the force object 
             assumes the noForceChange value."
    DEFVAL { noForceChange }
    ::= { sharedMemRmIfOutputQCfgEntry 5 }

sharedMemRmIfOutputQCellCount   OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "Count of the number of cells in the output queue."
    ::= { sharedMemRmIfOutputQCfgEntry 6 }

sharedMemRmIfThresholdCfgTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF SharedMemRmIfThresholdCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing the output queue thresholds
            used on ATM physical interface output queues. These are specified
            per Service Category. This table is not instantiated for interfaces
            to which it cannot be applied."
    ::= { ciscoAtmRmIfSharedMem 2 }
 
sharedMemRmIfThresholdCfgEntry OBJECT-TYPE
    SYNTAX     SharedMemRmIfThresholdCfgEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the sharedMemRmIfThresholdCfgTable
            containing Resource Management configuration for an ATM
            interface.  A particular row is identified by the
            value of MIB-II's ifIndex, and the Service Category."
    INDEX      { ifIndex, rmIfSc}
    ::= { sharedMemRmIfThresholdCfgTable 1 }
 
SharedMemRmIfThresholdCfgEntry ::= SEQUENCE {
    sharedMemRmIfDiscardThreshold         FineQueueThreshold,
    sharedMemRmIfEfciThreshold            INTEGER,
    sharedMemRmIfAbrRelativeRateThreshold FineQueueThreshold
}

sharedMemRmIfDiscardThreshold OBJECT-TYPE
    SYNTAX     FineQueueThreshold
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue CLP/EPD threshold for this Service 
             Category on this ATM interface. This is expressed in 
             percent-of-full. Note that 100% full effectively turns 
             off the threshold."
    DEFVAL { percent50 }
    ::= { sharedMemRmIfThresholdCfgEntry 1 }
 
sharedMemRmIfEfciThreshold OBJECT-TYPE
    SYNTAX     INTEGER {
                    percent12(1),
                    percent25(2),
                    percent50(3),
                    percent100(4)
                   }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue EFCI marking threshold for this Service 
              Category on this ATM interface. This is expressed in 
              percent-of-full. Note that 100% full effectively turns off
              the threshold."
    DEFVAL { percent25 }
    ::= { sharedMemRmIfThresholdCfgEntry 2 }

sharedMemRmIfAbrRelativeRateThreshold OBJECT-TYPE
    SYNTAX     FineQueueThreshold
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The ABR Relative-rate marking queue congestion threshold 
             for the ABR queue on this ATM interface. This is expressed in
             percent-of-full. Note that 100% full effectively turns off
             the threshold. This object is only defined for the abr
             service category."
    DEFVAL { percent25 }
    ::= { sharedMemRmIfThresholdCfgEntry 3 }

--
-- The Lightstream per-VC queueing chipset ATM Switch Resource
-- Management Group
--
lsPerVcqRmThreshGrpTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF LsPerVcqRmThreshGrpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing information
             for Switch Threshold Groups. When cells are
             queued in the switch for a direction of cell
             traffic on an ATM connection (VC or VP), several
             functions related to queueing are dictated
             by the congestion state (fullness) of the Threshold
             Group. Each connection queue is a member of
             a Threshold Group.
             These functions include:
             - The limit on the number of cells that can
               be queued. Cells exceeding this limit are
               discarded.
             - The discard threshold, used for CLP/EPD
               discard when the fullness of the queue exceeds
               the threshold.
             - The marking threshold, used for EFCI
               and ABR-RR marking.
             Each Threshold Group has a maximum number of cells
             that can be resident in it at any one time. The
             number of cells in a Group consists of the number
             of cells in all the queues that are a member of
             the Group. As the number of cells in a Group
             approaches the maximum number for the Group,
             the queue limits may be decreased. This limits
             the share of  buffering available to each
             connection as cell-memory is used."
    ::= { ciscoLsPerVcqAtmRmSwitch 1 }

lsPerVcqRmThreshGrpEntry OBJECT-TYPE
    SYNTAX     LsPerVcqRmThreshGrpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the lsPerVcqRmThreshGrpTable
             containing Resource Management configuration for a
             Threshold Group. All entries ever in the table are 
             present at startup, none are created dynamically."
    INDEX      { lsPerVcqRmThreshGrp }
    ::= { lsPerVcqRmThreshGrpTable 1 }

LsPerVcqRmThreshGrpEntry ::= SEQUENCE {
    lsPerVcqRmThreshGrp                   LsPerVcqThresholdGroup,
    lsPerVcqRmThreshGrpMaxSize            INTEGER,
    lsPerVcqRmThreshGrpQMaxSize           INTEGER,
    lsPerVcqRmThreshGrpQMinSize           INTEGER,
    lsPerVcqRmThreshGrpDiscThreshold      INTEGER,
    lsPerVcqRmThreshGrpMarkThreshold      INTEGER,
    lsPerVcqRmThreshGrpName               DisplayString,
    lsPerVcqRmThreshGrpCellCount          Gauge32
}

lsPerVcqRmThreshGrp OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroup
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Threshold Group specified by this entry."
    ::= { lsPerVcqRmThreshGrpEntry 1 }

lsPerVcqRmThreshGrpMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (-1..65535)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the maximum number of cells that may
             occupy this Threshold Group. While any integer in the range
             can be set, the hardware granularity is in 64-cell units. 
             Therefore, the value installed is [(value / 64) * 64] + 63. 

             If the value of this object is set to -1, the default
             value for the threshold-group is restored."
    DEFVAL { 65535 }
    ::= { lsPerVcqRmThreshGrpEntry 2 }

lsPerVcqRmThreshGrpQMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (31..16383)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the
             maximum limit on the number of cells that may occupy
             connection queues that are a member of this Threshold
             Group. A connection queue that is a member of this
             Threshold Group will never have more cells resident
             in it than this limit. This is the queue limit applied
             when the Threshold Group is uncongested.  The QMaxSize
             must be greater than or equal to the Threshold Group 
             QMinSize. QMaxSize should be less than MaxSize for the
             Threshold Group.

             While any integer in the range can be set, the hardware 
             granularity is in 16-cell units. Therefore, the
             largest possible queue size installed is: 
             [(value / 16) * 16]+15"

    ::= { lsPerVcqRmThreshGrpEntry 3 }

lsPerVcqRmThreshGrpQMinSize OBJECT-TYPE
    SYNTAX     INTEGER (1..1023)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the
             minimum limit on the number of cells that may occupy
             connection queues that are a member of this Threshold
             Group. The Threshold Group at it's most congested will
             not limit a connection queue to fewer than this number
             of cells. The QMinSize must be less than or equal to 
             the Threshold Group QMaxSize. The hardware granularity
             is in units of one cell."
    ::= { lsPerVcqRmThreshGrpEntry 4 }

lsPerVcqRmThreshGrpDiscThreshold OBJECT-TYPE
    SYNTAX     INTEGER (-1..100)
    UNITS      "percentage"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue CLP/EPD threshold for this Threshold
             Group. This is expressed in percent-of-full. Note that
             100% full effectively turns off the threshold. Setting
             this object to -1 restores the default value for the
             Threshold Group. The granularity of the fill-level of 
             a queue installed in hardware is the same as that for 
             queue limits."
    ::= { lsPerVcqRmThreshGrpEntry 5 }

lsPerVcqRmThreshGrpMarkThreshold OBJECT-TYPE
    SYNTAX     INTEGER (-1..100)
    UNITS      "percentage"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue EFCI/ABR-RR marking threshold for
             this Threshold Group. This is expressed in
             percent-of-full. Note that 100% full effectively turns
             off the threshold. Setting this object to -1 restores
             the default value for the Threshold Group. The 
             granularity of the fill-level of a queue installed in 
             hardware is the same as that for queue limits."
    ::= { lsPerVcqRmThreshGrpEntry 6 }

lsPerVcqRmThreshGrpName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..20))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The name associated with the threshold-group. If
             this is set to the null-string, the default
             name for the Threshold Group is assigned."
    ::= { lsPerVcqRmThreshGrpEntry 7 }

lsPerVcqRmThreshGrpCellCount   OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "Count of the number of cells in the Threshold
             Group."
    ::= { lsPerVcqRmThreshGrpEntry 8 }


lsPerVcqRmThreshGrpServiceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF LsPerVcqRmThreshGrpServiceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table specifying which
             VC or VP queues  are assigned to a Threshold
             Group."
    ::= { ciscoLsPerVcqAtmRmSwitch 2 }

lsPerVcqRmThreshGrpServiceEntry OBJECT-TYPE
    SYNTAX     LsPerVcqRmThreshGrpServiceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             lsPerVcqRmThreshGrpServiceTable.  All entries 
             ever in the table are present at startup, none 
             are created dynamically."
    INDEX      { lsPerVcqRmThreshGrpService }
    ::= { lsPerVcqRmThreshGrpServiceTable 1 }

LsPerVcqRmThreshGrpServiceEntry ::= SEQUENCE {
    lsPerVcqRmThreshGrpService      LsPerVcqThresholdGroupService,
    lsPerVcqRmThreshGrpServGroup    LsPerVcqThresholdGroup
}

lsPerVcqRmThreshGrpService OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroupService
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Service specified by this entry."
    ::= { lsPerVcqRmThreshGrpServiceEntry 1 }

lsPerVcqRmThreshGrpServGroup OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroup
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The Threshold Group to which VC/VP queues specified
             by the service are assigned. Changing the assignment
             of service to Threshold Group does not alter the
             assignment for connections currently installed in
             hardware, but those connections that are subsequently
             installed."
    ::= { lsPerVcqRmThreshGrpServiceEntry 2 }

lsPerVcqRmHierarchicalSchedulingMode   OBJECT-TYPE
        SYNTAX  INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
        "On a LS1010 equipped with the Lightstream per-VC 
         queueing chipset, the
         user can define Hierarchical VP-Tunnels. Each such
         tunnel has its own dedicated scheduler, programmed
         to output data at a configurable maximum rate.
         Therefore, the overall output of the Hierarchical
         VP-tunnel is rate-limited. In addition, Virtual 
         Circuits of different service categories can 
         traverse through such a tunnel, and each of these
         Virtual Circuits are guaranteed their individual
         contracted bandwidth agreement.
 
         This object must be set to enabled before any
         Hierarchical VP-tunnels can be defined on the device.
 
         Any setting of this variable requires a reload 
         of the device to be effective.
 
         Setting this object to enabled will cause the 
         software to initialize the additional schedulers
         needed by the Hierarchical VP-Tunnels. Other
         limited scheduler resources are therefore used by a
         larger number of schedulers (as compared to the case
         when Hierarchical Scheduling is disabled on the device). 
         This may result in fewer number of connections 
         passing Connection Admission Control.
 
         This object is therefore provided so that the 
         user can make an informed decision as to whether
         Hierarchical Scheduling is to be used.
 
         This object is defined on a LS1010 only when 
         the switch is equipped with the Lightstream
         per-VC queueing chipset."
        DEFVAL { disabled }
::= { ciscoLsPerVcqAtmRmSwitch 3 }

--
-- The Catalyst8540MSR per-VC queueing chipset ATM Switch Resource
-- Management Group
--
cgrPerVcqRmThreshGrpTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CgrPerVcqRmThreshGrpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing information
             for Switch Threshold Groups. When cells are
             queued in the switch for a direction of cell
             traffic on an ATM connection (VC or VP), several
             functions related to queueing are dictated
             by the congestion state (fullness) of the Threshold
             Group. Each connection queue is a member of
             a Threshold Group.
             These functions include:
             - The limit on the number of cells that can
               be queued. Cells exceeding this limit are
               discarded.
             - The discard threshold, used for CLP/EPD
               discard when the fullness of the queue exceeds
               the threshold.
             - The marking threshold, used for EFCI marking.
             Each Threshold Group has a maximum number of cells
             that can be resident in it at any one time. The
             number of cells in a Group consists of the number
             of cells in all the queues that are a member of
             the Group. As the number of cells in a Group
             approaches the maximum number for the Group,
             the queue limits may be decreased. This limits
             the share of  buffering available to each
             connection as cell-memory is used.

             On the Catalyst8540MSR platform, there are a
             maximum of 8 switching modules. Each switching
             module services a certain group of ports (this
             mapping is fixed in hardware). Each module also
             has its own cell memory (for per VC queueing),
             and hence performs its own congestion control,
             independent of any other switching module.
             Each switching module has its own set of
             Switch Threshold Groups, which are 
             independently programmable and readable.

             This table is supported only on the Catalyst8540MSR
             platform."
    ::= { ciscoCgrPerVcqAtmRmSwitch 1 }

cgrPerVcqRmThreshGrpEntry OBJECT-TYPE
    SYNTAX     CgrPerVcqRmThreshGrpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cgrPerVcqRmThreshGrpTable
             containing Resource Management configuration for a
             Threshold Group. All entries ever in the table are
             present at startup, none are created dynamically."
    INDEX      { cgrPerVcqModuleId, cgrPerVcqRmThreshGrp }
    ::= { cgrPerVcqRmThreshGrpTable 1 }

CgrPerVcqRmThreshGrpEntry ::= SEQUENCE {
    cgrPerVcqModuleId                      CgrPerVcqModuleId,
    cgrPerVcqRmThreshGrp                   LsPerVcqThresholdGroup,
    cgrPerVcqRmThreshGrpMaxSize            INTEGER,
    cgrPerVcqRmThreshGrpQMaxSize           INTEGER,
    cgrPerVcqRmThreshGrpQMinSize           INTEGER,
    cgrPerVcqRmThreshGrpDiscThreshold      INTEGER,
    cgrPerVcqRmThreshGrpMarkThreshold      INTEGER,
    cgrPerVcqRmThreshGrpName               DisplayString,
    cgrPerVcqRmThreshGrpCellCount          Gauge32
}
 
cgrPerVcqModuleId OBJECT-TYPE
    SYNTAX    CgrPerVcqModuleId
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
    "The switching module specified by this entry."
    ::= { cgrPerVcqRmThreshGrpEntry 1 }

cgrPerVcqRmThreshGrp OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroup
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Threshold Group specified by this entry."
    ::= { cgrPerVcqRmThreshGrpEntry 2 }
 
cgrPerVcqRmThreshGrpMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (-1..131071)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the maximum number of cells that may
             occupy this Threshold Group. While any integer in the range
             can be set, the hardware granularity is in 64-cell units.
             Therefore, the value installed is [(value / 64) * 64] + 63.
 
             Even though the maximum value for this object is 131071,
             the cell memory actually present in hardware can be
             less.

             The agent will allow values for this object not exceeding
             the actual cell memory present in hardware.

             If the value of this object is set to -1, the default
             value for the threshold-group is restored."
    DEFVAL { 131071 }
    ::= { cgrPerVcqRmThreshGrpEntry 3 }

cgrPerVcqRmThreshGrpQMaxSize OBJECT-TYPE
    SYNTAX     INTEGER (31..16383)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the
             maximum limit on the number of cells that may occupy
             connection queues that are a member of this Threshold
             Group. A connection queue that is a member of this
             Threshold Group will never have more cells resident
             in it than this limit. This is the queue limit applied
             when the Threshold Group is uncongested.  The QMaxSize
             must be greater than or equal to the Threshold Group
             QMinSize. QMaxSize should be less than MaxSize for the
             Threshold Group.
 
             While any integer in the range can be set, the hardware
             granularity is in 16-cell units. Therefore, the
             largest possible queue size installed is:
             [(value / 16) * 16]+15"
 
    ::= { cgrPerVcqRmThreshGrpEntry 4 }
 
cgrPerVcqRmThreshGrpQMinSize OBJECT-TYPE
    SYNTAX     INTEGER (1..1023)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects an explicit configuration of the
             minimum limit on the number of cells that may occupy
             connection queues that are a member of this Threshold
             Group. The Threshold Group at it's most congested will
             not limit a connection queue to fewer than this number
             of cells. The QMinSize must be less than or equal to
             the Threshold Group QMaxSize. The hardware granularity
             is in units of one cell."
    ::= { cgrPerVcqRmThreshGrpEntry 5 }
 
cgrPerVcqRmThreshGrpDiscThreshold OBJECT-TYPE
    SYNTAX     INTEGER (-1..100)
    UNITS      "percentage"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue CLP/EPD threshold for this Threshold
             Group. This is expressed in percent-of-full. Note that
             100% full effectively turns off the threshold. Setting
             this object to -1 restores the default value for the
             Threshold Group. The granularity of the fill-level of
             a queue installed in hardware is the same as that for
             queue limits."
    ::= { cgrPerVcqRmThreshGrpEntry 6 }
 
cgrPerVcqRmThreshGrpMarkThreshold OBJECT-TYPE
    SYNTAX     INTEGER (-1..100)
    UNITS      "percentage"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The output queue EFCI/ABR-RR marking threshold for
             this Threshold Group. This is expressed in
             percent-of-full. Note that 100% full effectively turns
             off the threshold. Setting this object to -1 restores
             the default value for the Threshold Group. The
             granularity of the fill-level of a queue installed in
             hardware is the same as that for queue limits."
    ::= { cgrPerVcqRmThreshGrpEntry 7 }
 
cgrPerVcqRmThreshGrpName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..20))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The name associated with the threshold-group. If
             this is set to the null-string, the default
             name for the Threshold Group is assigned."
    ::= { cgrPerVcqRmThreshGrpEntry 8 }
 
cgrPerVcqRmThreshGrpCellCount   OBJECT-TYPE
    SYNTAX     Gauge32
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "Count of the number of cells in the Threshold
             Group."
    ::= { cgrPerVcqRmThreshGrpEntry 9 }
 
cgrPerVcqRmThreshGrpServiceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CgrPerVcqRmThreshGrpServiceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table specifying which
             VC or VP queues  are assigned to a Threshold
             Group.

             This table is supported only on the Catalyst8540MSR
             Platform."
    ::= { ciscoCgrPerVcqAtmRmSwitch 2 }
 
cgrPerVcqRmThreshGrpServiceEntry OBJECT-TYPE
    SYNTAX     CgrPerVcqRmThreshGrpServiceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the
             cgrPerVcqRmThreshGrpServiceTable.  All entries
             ever in the table are present at startup, none
             are created dynamically."
    INDEX      { cgrPerVcqRmThreshGrpService }
    ::= { cgrPerVcqRmThreshGrpServiceTable 1 }
 
CgrPerVcqRmThreshGrpServiceEntry ::= SEQUENCE {
    cgrPerVcqRmThreshGrpService      LsPerVcqThresholdGroupService,
    cgrPerVcqRmThreshGrpServGroup    LsPerVcqThresholdGroup
}
 
cgrPerVcqRmThreshGrpService OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroupService
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The Service specified by this entry."
    ::= { cgrPerVcqRmThreshGrpServiceEntry 1 }
 
cgrPerVcqRmThreshGrpServGroup OBJECT-TYPE
    SYNTAX     LsPerVcqThresholdGroup
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The Threshold Group to which VC/VP queues specified
             by the service are assigned. Changing the assignment
             of service to Threshold Group does not alter the
             assignment for connections currently installed in
             hardware, but those connections that are subsequently
             installed."
    ::= { cgrPerVcqRmThreshGrpServiceEntry 2 }

cgrPerVcqRmHierarchicalSchedulingMode   OBJECT-TYPE
        SYNTAX  INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
        "On a Catalyst8540 MSR, the user can define Hierarchical
         VP-Tunnels. Each such tunnel has its own dedicated
         scheduler, programmed to output data at a configurable
         maximum rate. 

         Therefore, the overall output of the Hierarchical
         VP-tunnel is rate-limited. In addition, Virtual
         Circuits of different service categories can
         traverse through such a tunnel, and each of these
         Virtual Circuits are guaranteed their individual
         contracted bandwidth agreement.
 
         This object must be set to enabled before any
         Hierarchical VP-tunnels can be defined on the device.
 
         Any setting of this variable requires a reload
         of the device to be effective.
 
         Setting this object to enabled will cause the
         software to initialize the additional schedulers
         needed by the Hierarchical VP-Tunnels. Other
         limited scheduler resources are therefore used by a
         larger number of schedulers (as compared to the case
         when Hierarchical Scheduling is disabled on the device).
         This may result in fewer number of connections
         passing Connection Admission Control.
 
         This object is therefore provided so that the
         user can make an informed decision as to whether
         Hierarchical Scheduling is to be used.

         This object is supported only on the Catalyst8540MSR
         platform."
        DEFVAL { disabled }

::= { ciscoCgrPerVcqAtmRmSwitch 3 }
 
--
-- The Lightstream per-VC queueing switch chipset ATM Interface Resource
-- Management Group
--
lsPerVcqRmIfTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF LsPerVcqRmIfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing configuration information
             for ATM physical interfaces."
    ::= { ciscoLsPerVcqAtmRmIf 1 }

lsPerVcqRmIfEntry OBJECT-TYPE
    SYNTAX     LsPerVcqRmIfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the lsPerVcqRmIfTable
             containing Resource Management configuration for an ATM
             interface. An entry in the table is present when an 
             entry in the ifTable is created for an ATM interface 
             that uses the Lighstream per-VC queueing chipset."
    INDEX      { ifIndex }
    ::= { lsPerVcqRmIfTable 1 }

LsPerVcqRmIfEntry ::= SEQUENCE {
    lsPerVcqRmIfMinWrrServiceClass        LsPerVcqServiceClass
}

lsPerVcqRmIfMinWrrServiceClass OBJECT-TYPE
    SYNTAX     LsPerVcqServiceClass
    UNITS      "service class"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The service classes on an interface are partitioned
             into two subsets, dictating how a service class
             with a cell ready to transmit is chosen (subsequently
             a connection is chosen within the selected service
             class). There are two subsets: Strict Priority (SP),
             and Weighted Round Robin (WRR). The SP subset
             service classes are selected by strict priority (highest
             priority with available cell wins). If there are any SP
             service classes, they take precedence over any WRR
             classes.
             A WRR subset service class is chosen from among the
             WRR service classes with an available cell using a
             WRR algorithm.
             The SP service classes (if any) include a contiguous
             range of classes, starting with c2 (c1 is dedicated to
             CBR, which doesn't use SP/WRR).  The WRR service
             classes (if any) include a contiguous range of classes,
             ending with c5.
             This object specifies the break-point between SP and WRR
             service classes. Note that (assuming all service classes
             are used) specifying c2 indicates all service classes are
             WRR, and specifying c5 indicates all service classes 
             are SP."
    ::= { lsPerVcqRmIfEntry 1 }



lsPerVcqRmIfServiceClassTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF LsPerVcqRmIfServiceClassEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing configuration information
             for ATM physical interface Service Classes (not
             logical port ATM interfaces). An ATM connection (VC or VP)
             on an interface is a member of a Service Class. The
             Service Class is used in the scheduling discipline that
             determines which cell is next transmitted on the
             interface. If the rate scheduler has no cell
             to be sent in the guaranteed cell-flow on an interface,
             a decision is made between all Service Classes with
             VCs with cells ready for transmit."
    ::= { ciscoLsPerVcqAtmRmIf 2 }

lsPerVcqRmIfServiceClassEntry OBJECT-TYPE
    SYNTAX     LsPerVcqRmIfServiceClassEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the lsPerVcqRmIfServiceClassTable
             containing Resource Management configuration for an ATM
             interface.  A particular row is identified by the
             value of MIB-II's ifIndex, and the output queue.
             An entry in the table is present when an entry in 
             the ifTable is created for an ATM interface that 
             uses the Lighstream per-VC queueing chipset."
    INDEX      { ifIndex, lsPerVcqRmIfServiceClass }
    ::= { lsPerVcqRmIfServiceClassTable 1 }

LsPerVcqRmIfServiceClassEntry ::= SEQUENCE {
    lsPerVcqRmIfServiceClass              LsPerVcqServiceClass,
    lsPerVcqRmIfServClassConnType         INTEGER,
    lsPerVcqRmIfServClassWrrWeight        INTEGER
}


lsPerVcqRmIfServiceClass OBJECT-TYPE
    SYNTAX     LsPerVcqServiceClass
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The service class on this ATM interface."
    ::= { lsPerVcqRmIfServiceClassEntry 1 }

lsPerVcqRmIfServClassConnType OBJECT-TYPE
    SYNTAX     INTEGER (1..31)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The types of connections using this service class on
             this ATM interface.
                 The various bit positions are:
                  1    constant bit rate (cbr)
                  2    variable bit rate-real time (vbr-rt)
                  4    variable bit rate-non real time (vbr-nrt)
                  8    available bit rate (abr)
                 16    unspecified bit rate (ubr)"
    ::= { lsPerVcqRmIfServiceClassEntry 2 }

lsPerVcqRmIfServClassWrrWeight OBJECT-TYPE
    SYNTAX     INTEGER (1..15)
    UNITS      "weight"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Configure the weighting specified for a service class
             to make the scheduling decision among active service
             classes in the WRR subset."
    ::= { lsPerVcqRmIfServiceClassEntry 3 }

--
-- The ATM Resource Management Traffic Shaper Interface Objects
--
rmTrafficShaperIfTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RmTrafficShaperIfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing ATM Traffic 
             Shaper configuration  and state information for 
             ATM interfaces."
    ::= { ciscoAtmRmTrafShaperIf 1 }

rmTrafficShaperIfEntry OBJECT-TYPE
    SYNTAX     RmTrafficShaperIfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rmTrafficShaperIfTable
             containing Traffic Shaper configuration and state 
             information for an ATM interface.  The particular 
             interface is identified by the value of MIB-II's 
             ifIndex."
    INDEX      { ifIndex }
    ::= { rmTrafficShaperIfTable 1 }

RmTrafficShaperIfEntry ::= SEQUENCE {
    rtsIfMaxThreshold                 Unsigned32,
    rtsIfCellCount                    Gauge32,
    rtsIfVbrCfgRequested              INTEGER,
    rtsIfVbrCfgInstalled              INTEGER,
    rtsIfBeCfgRequested               INTEGER,
    rtsIfBeCfgInstalled               INTEGER, 
    rtsIfVbrClassMaxThrshRequested    INTEGER,
    rtsIfVbrClassMaxThrshInstalled    Unsigned32,
    rtsIfBeClassMaxThrshRequested     INTEGER,
    rtsIfBeClassMaxThrshInstalled     Unsigned32,
    rtsIfVbrVcMaxThrshRequested       Unsigned32,
    rtsIfVbrVcMaxThrshInstalled       Unsigned32,
    rtsIfBeVcMaxThrshRequested        Unsigned32,
    rtsIfBeVcMaxThrshInstalled        Unsigned32
}

rtsIfMaxThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (0..4294967295)
    UNITS         "cells"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "This object reflects the value of the Maximum 
                Threshold installed in the traffic shaper hardware
                for this interface.  This object is expressed in 
                number of cell buffers.  This object is not 
                instantiated for interfaces to which it cannot 
                be applied." 
    ::= { rmTrafficShaperIfEntry 1 }

rtsIfCellCount OBJECT-TYPE
    SYNTAX        Gauge32
    UNITS         "cells"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "This object contains the count of cells queued to
                this interface in the traffic shaping hardware. 
                This object is not instantiated for interfaces to 
                which it cannot be applied." 
    ::= { rmTrafficShaperIfEntry 2 }

rtsIfVbrCfgRequested OBJECT-TYPE
    SYNTAX     INTEGER { 
                  shapingDisable(1),    -- Shaping disabled
                  shapeToPcr(2),        -- Shape to PCR only.
                  shapeToScrAndPcr(3)   -- Shape to PCR, SCR and MBS
                       } 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "If this object is set to the value 'shapingDisable', 
             VBR connections(VC or VP) on this interface will not 
             be shaped.  If the object is set to the value 
             'shapeToScrAndPcr', the VBR (VC or VP) connections on
             this interface will be shaped to conform to their 
             respective SCR, PCR and MBS traffic parameters.  If 
             this object is set to the value 'shapeToPcr', the VBR 
             (VC or VP) connections on this interface will be shaped
             to conform to their respective PCR traffic parameter.
             Depending on the capabilities of the traffic shaping 
             hardware, the changes to the traffic shaping 
             configuration may or may not take effect immediately 
             and may require that the traffic shaping hardware be 
             reset to effect the change.  The value of the object 
             rtsIfVbrCfgInstalled will reflect the actual VBR 
             Traffic Shaping configuration installed in the 
             hardware currently.  Depending on the capabilities of 
             the traffic shaping hardware, the value of this object 
             may or may not apply to terminating VBR VPs on this 
             interface.  This object is not instantiated for 
             interfaces to which it cannot be applied."
    DEFVAL { shapingDisable }
    ::= { rmTrafficShaperIfEntry 3 }

rtsIfVbrCfgInstalled OBJECT-TYPE
    SYNTAX     INTEGER { 
                  shapingDisable(1),    -- Shaping disabled
                  shapeToPcr(2),        -- Shape to PCR only.
                  shapeToScrAndPcr(3)   -- Shape to PCR, SCR and MBS
                       } 
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the current VBR Traffic Shaping 
             configuration installed in the hardware. This object 
             is not instantiated for interfaces to which it cannot 
             be applied."
    ::= { rmTrafficShaperIfEntry 4 }

rtsIfBeCfgRequested OBJECT-TYPE
    SYNTAX     INTEGER { 
                  shapingDisable(1),    -- Shaping disabled
                  shapeToPcr(2)         -- Shape to PCR only.
                       } 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects the traffic shaping configuration
             applied to Best-Effort Connections(VC or VP) belonging 
             to UBR and ABR service categories on this interface.  
             If this object is set to the value 'shapingDisable',
             best-effort connections(VC or VP) on this interface 
             will not be shaped. If this object is set to the value 
             'shapeToPcr', the best-effort connections(VC or VP) on
             this interface will be shaped to conform to their 
             respective PCR traffic parameter. Depending on the 
             capabilities of the traffic shaping hardware, the
             changes to the traffic shaping configuration may or
             may not take effect immediately and may require that 
             the traffic shaping hardware be reset to effect the 
             change.  The object rtsIfBeCfgInstalled will reflect
             the actual best-effort Traffic Shaping configuration 
             installed in the hardware currently. Depending on the 
             capabilities of the traffic shaping hardware, the value 
             of this object may or may not apply to terminating 
             best-effort VPs on this interface.  This object is
             not instantiated for interfaces to which it cannot 
             be applied."
    DEFVAL { shapingDisable }
    ::= { rmTrafficShaperIfEntry 5 }

rtsIfBeCfgInstalled OBJECT-TYPE
    SYNTAX     INTEGER { 
                  shapingDisable(1),    -- Shaping disabled
                  shapeToPcr(2)         -- Shape to PCR only.
                       } 
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the current Best-Effort Traffic
             Shaping configuration installed in the hardware. 
             This object is not instantiated for interfaces to 
             which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 6 }

rtsIfVbrClassMaxThrshRequested OBJECT-TYPE
    SYNTAX     INTEGER (1..95)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Traffic Shaper Maximum
             Cell Buffer Threshold for the VBR Traffic Class.
             The value of this object is expressed as a percent
             of the value of rtsIfMaxThreshold object.  A set 
             request for this object will succeed only if the
             value of the ifAdminStatus object for this 
             interface is 'down'. The Traffic Shaping hardware 
             may not have the support to represent all the 
             values and hence the value installed in hardware 
             could be different.  And the value installed in 
             hardware will be available through the object 
             rtsIfVbrClassMaxThrshInstalled. This object is 
             not instantiated for interfaces to which 
             it cannot be applied."
    ::= { rmTrafficShaperIfEntry 7 }

rtsIfVbrClassMaxThrshInstalled OBJECT-TYPE
    SYNTAX     Unsigned32  (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the value of Maximum Class 
             Threshold for VBR Traffic Class, in number of
             cell buffers, that is installed in the Traffic 
             Shaping hardware. This object is not instantiated 
             for interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 8 }

rtsIfBeClassMaxThrshRequested OBJECT-TYPE
    SYNTAX     INTEGER (1..95)
    UNITS      "percent"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object specifies the Traffic Shaper Maximum Cell
             Buffer Threshold for the Best-Effort Traffic Class. 
             The value of this object is expressed as a percent of
             the value of rtsIfMaxThreshold object.  A set request 
             for this object will succeed only if the value of the 
             ifAdminStatus object for this interface is 'down'. 
             The Traffic Shaping hardware may not have the support 
             to represent all the values and hence the value 
             installed in hardware could be different.  And this 
             installed value will be available through the object 
             rtsIfBeClassMaxThrshInstalled. This object is not 
             instantiated for interfaces to which it cannot 
             be applied."
    ::= { rmTrafficShaperIfEntry 9 }

rtsIfBeClassMaxThrshInstalled OBJECT-TYPE
    SYNTAX     Unsigned32 (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the value of Maximum Class 
             Threshold for Best-Effort Traffic Class, in number 
             of cell buffers, that is installed in the Traffic 
             Shaping hardware. This object is not instantiated 
             for interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 10 }

rtsIfVbrVcMaxThrshRequested OBJECT-TYPE
    SYNTAX     Unsigned32  (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects the Maximum Threshold of the
             per-connection queues of VBR connections(VCs or VPs) in 
             the traffic shaping hardware. The value of this object 
             is expressed in number of cell buffers.  Any change made
             to the value of this object will only effect subsequently 
             established VBR connections and will not impact already 
             existing VBR connections.  The Traffic Shaping hardware 
             may not have the support to represent all the values and 
             hence the value installed in hardware could be different.
             And the value installed in hardware will be available 
             through the object rtsIfVbrVcMaxThrshInstalled. This 
             object is not instantiated for interfaces to which it 
             cannot be applied."
    DEFVAL { 512 }
    ::= { rmTrafficShaperIfEntry 11 }

rtsIfVbrVcMaxThrshInstalled OBJECT-TYPE
    SYNTAX     Unsigned32 (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the Maximum Threshold for the 
             per-connection queues of VBR connections(VCs or VPs)
             that is installed in the Traffic Shaping hardware.
             The value of this object is expressed in number of 
             cell buffers.  This object is not instantiated for 
             interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 12 }

rtsIfBeVcMaxThrshRequested OBJECT-TYPE
    SYNTAX     Unsigned32 (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "This object reflects the Maximum Threshold of the
             per-connection queues of best-effort connections(VCs 
             or VPs) in the traffic shaping hardware. The value 
             of this object is expressed in number of cell
             buffers.  Any change made to the value of this 
             object will only effect subsequently established 
             best-effort connections and will not impact already
             existing best-effort connections. The Traffic Shaping
             hardware may not have the support to represent all
             the values and hence the value installed in hardware 
             could be different. And the value installed in 
             hardware will be available through the object 
             rtsIfBeVcMaxThrshInstalled.  This object is not 
             instantiated for interfaces to which it cannot
             be applied."
    DEFVAL { 1024 }
    ::= { rmTrafficShaperIfEntry 13 }

rtsIfBeVcMaxThrshInstalled OBJECT-TYPE
    SYNTAX     Unsigned32 (0..4294967295)
    UNITS      "cells"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "This object reflects the Maximum Threshold for the 
             per-connection queues of Best-Effort connections(VCs
             or VPs) that is installed in the Traffic Shaping 
             hardware.  The value of this object is expressed 
             in number of cell buffers.  This object is not 
             instantiated for interfaces to which it cannot 
             be applied."
    ::= { rmTrafficShaperIfEntry 14 }

-- conformance information

ciscoAtmRmMIBConformance
              OBJECT IDENTIFIER ::= { ciscoAtmRmMIB 3 }
ciscoAtmRmMIBCompliances
              OBJECT IDENTIFIER ::= { ciscoAtmRmMIBConformance 1 }
ciscoAtmRmMIBGroups
              OBJECT IDENTIFIER ::= { ciscoAtmRmMIBConformance 2 }

-- compliance statements

ciscoAtmRmMIBCompliance MODULE-COMPLIANCE
    STATUS obsolete -- superceded by ciscoAtmRmMIBCompliance2 
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management 
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup, atmRmPhyIfCfgMIBGroup,
                       atmRmAllIfCfgMIBGroup, atmRmIfAllStateMIBGroup,
                       atmRmIfStatsMIBGroup }
    ::= { ciscoAtmRmMIBCompliances 1 }

ciscoAtmRmMIBCompliance2 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance3
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup2,
                       atmRmAllIfCfgMIBGroup, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup }
    ::= { ciscoAtmRmMIBCompliances 2 }

ciscoAtmRmMIBCompliance3 MODULE-COMPLIANCE
    STATUS  obsolete  -- superceded by ciscoAtmRmMIBCompliance4
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup3,
                       atmRmAllIfCfgMIBGroup2, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup }
    ::= { ciscoAtmRmMIBCompliances 3 }

ciscoAtmRmMIBCompliance4 MODULE-COMPLIANCE
    STATUS  obsolete  -- superceded by ciscoAtmRmMIBCompliance5
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup3,
                       atmRmAllIfCfgMIBGroup3, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup }
    ::= { ciscoAtmRmMIBCompliances 4 }

ciscoAtmRmMIBCompliance5 MODULE-COMPLIANCE
    STATUS  obsolete
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup3,
                       atmRmAllIfCfgMIBGroup3, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2 }
    ::= { ciscoAtmRmMIBCompliances 5 }

ciscoAtmRmMIBCompliance6 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance7
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup3,
                       atmRmAllIfCfgMIBGroup3, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup }
    ::= { ciscoAtmRmMIBCompliances 6 }

ciscoAtmRmMIBCompliance7 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance8
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup4,
                       atmRmAllIfCfgMIBGroup4, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup }
    ::= { ciscoAtmRmMIBCompliances 7 }

ciscoAtmRmMIBCompliance8 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance9
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup4, atmRmIfAllStateMIBGroup2,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup }
    ::= { ciscoAtmRmMIBCompliances 8 }

ciscoAtmRmMIBCompliance9 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance10
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup4, atmRmIfAllStateMIBGroup3,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup }
    ::= { ciscoAtmRmMIBCompliances 9 }

ciscoAtmRmMIBCompliance10 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance11
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup5, atmRmIfAllStateMIBGroup3,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup }
    ::= { ciscoAtmRmMIBCompliances 10 }

ciscoAtmRmMIBCompliance11 MODULE-COMPLIANCE
    STATUS  obsolete -- superceded by ciscoAtmRmMIBCompliance12
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource Management
             MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup5, atmRmIfAllStateMIBGroup3,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup2 }
    ::= { ciscoAtmRmMIBCompliances 11 }

ciscoAtmRmMIBCompliance12 MODULE-COMPLIANCE
    STATUS  deprecated -- superceded by ciscoAtmRmMIBCompliance13
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource 
             Management MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup5, atmRmIfAllStateMIBGroup3,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup2, atmRmTrafficShaperIfGroup }
    ::= { ciscoAtmRmMIBCompliances 12 }

ciscoAtmRmMIBCompliance13 MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for the Cisco ATM Resource
             Management MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { atmRmSwitchCfgMIBGroup2, atmRmPhyIfCfgMIBGroup5,
                       atmRmAllIfCfgMIBGroup6, atmRmIfAllStateMIBGroup3,
                       atmRmIfStatsMIBGroup, lsPerVcqAtmRmGroup2,
                       cgrPerVcqAtmRmGroup2, atmRmTrafficShaperIfGroup,
                       sharedMemAtmRmSwitchMIBGroup,
                       sharedMemAtmRmPhyIfMIBGroup }
    ::= { ciscoAtmRmMIBCompliances 13 }


-- units of conformance

atmRmSwitchCfgMIBGroup  OBJECT-GROUP
    OBJECTS { rmSwitchOverSubFactor, rmSwitchScrMarginFactor,
              rmSwitchAbrCongNotify, rmScDefaultQosMaxCtd, 
              rmScDefaultQosPeakToPeakCdv, rmScDefaultQosClr
            }
    STATUS  obsolete -- superceded by atmRmSwitchCfgMIBGroup2
    DESCRIPTION
            "A collection of objects which provide ATM Switch Resource
             Management configuration."
    ::= { ciscoAtmRmMIBGroups 1 }

sharedMemAtmRmSwitchMIBGroup   OBJECT-GROUP
    OBJECTS { sharedMemRmSwitchQueuedCellLimit, sharedMemRmSwitchQueuedCellCount 
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Switch Resource
             Management information global to a shared-memory ATM switch."
    ::= { ciscoAtmRmMIBGroups 2 }

atmRmPhyIfCfgMIBGroup   OBJECT-GROUP
    OBJECTS { rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
              rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
              rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
              rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr
            }
    STATUS  obsolete -- superceded by atmRmPhyIfCfgMIBGroup2
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management configuration for physical interfaces."
    ::= { ciscoAtmRmMIBGroups 3 }

atmRmAllIfCfgMIBGroup   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit, 
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr,
              rmIfDirMaxVbrScr, rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, rmIfDirMaxUbrTolerance
            }
    STATUS  obsolete -- superceded by atmRmAllIfCfgMIBGroup2
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management configuration for all interfaces."
    ::= { ciscoAtmRmMIBGroups 4 }

atmRmIfAllStateMIBGroup  OBJECT-GROUP
    OBJECTS { rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr, 
              rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd, 
              rmIfScTxP2PeakCdv, rmIfScTxClr
            }
    STATUS  obsolete -- superceded by atmRmIfAllStateMIBGroup2
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management status for all interfaces."
    ::= { ciscoAtmRmMIBGroups 5 }

atmRmIfStatsMIBGroup   OBJECT-GROUP
    OBJECTS { rmIfScRcacResultNumAdmit, rmIfScRcacResultNumTotalRequests,
              rmIfScRcacResultNumFailTraffComb, rmIfScRcacResultNumFailBw,
              rmIfScRcacResultNumFailLoss, rmIfScRcacResultNumFailDelay,
              rmIfScRcacResultNumFailCdv, rmIfScRcacResultNumFailBeLimit,
              rmIfScRcacResultNumFailParmLimit, rmIfScRcacResultNumFailOther 
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Switch Resource
             Management statistics."
    ::= { ciscoAtmRmMIBGroups 6 }

sharedMemAtmRmPhyIfMIBGroup   OBJECT-GROUP
    OBJECTS { sharedMemRmIfOutputQServCategory, sharedMemRmIfOutputQRequestedMaxSize,
              sharedMemRmIfOutputQInstalledMaxSize, sharedMemRmIfOutputQMaxSizeForce,
              sharedMemRmIfOutputQCellCount, sharedMemRmIfDiscardThreshold,
              sharedMemRmIfEfciThreshold, sharedMemRmIfAbrRelativeRateThreshold
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management information for physical interfaces
             of a shared-memory ATM switch."
    ::= { ciscoAtmRmMIBGroups 7 }

atmRmSwitchCfgMIBGroup2  OBJECT-GROUP
    OBJECTS { rmSwitchOverSubFactor, rmSwitchScrMarginFactor,
              rmSwitchAbrCongNotify, rmScDefaultQosMaxCtd,
              rmScDefaultQosPeakToPeakCdv, rmScDefaultQosClr,
              rmScDefaultQosClrClp01
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Switch Resource
             Management configuration."
    ::= { ciscoAtmRmMIBGroups 8 }

atmRmPhyIfCfgMIBGroup2  OBJECT-GROUP
    OBJECTS { rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled,
              rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg,
              rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr,
              rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr,
              rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance,
              rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance,
              rmIfUbrDefaultRxUpcTolerance
            }
    STATUS  obsolete -- superceded by atmRmPhyIfCfgMIBGroup2
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management configuration for physical interfaces."
    ::= { ciscoAtmRmMIBGroups 9 }

atmRmIfAllStateMIBGroup2 OBJECT-GROUP
    OBJECTS { rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr,
              rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd,
              rmIfScTxP2PeakCdv, rmIfScTxClr, rmIfScTxClrClp01
            }
    STATUS  obsolete -- superceded by atmRmIfAllStateMIBGroup3
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management status for all interfaces."
    ::= { ciscoAtmRmMIBGroups 10 }

lsPerVcqAtmRmGroup OBJECT-GROUP
    OBJECTS { lsPerVcqRmIfMinWrrServiceClass, lsPerVcqRmIfServClassConnType,
              lsPerVcqRmIfServClassWrrWeight, lsPerVcqRmThreshGrpMaxSize,
              lsPerVcqRmThreshGrpQMaxSize, lsPerVcqRmThreshGrpQMinSize,
              lsPerVcqRmThreshGrpDiscThreshold, lsPerVcqRmThreshGrpMarkThreshold,
              lsPerVcqRmThreshGrpName, lsPerVcqRmThreshGrpCellCount,
              lsPerVcqRmThreshGrpServGroup 
            }
    STATUS  obsolete
    DESCRIPTION
            "A collection of objects which provide ATM Resource
             Management status on platforms using the Lightstream
             per-VC queueing chipset."
    ::= { ciscoAtmRmMIBGroups 11 }

atmRmPhyIfCfgMIBGroup3  OBJECT-GROUP
    OBJECTS { rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled,
              rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg,
              rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr,
              rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr,
              rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance,
              rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance,
              rmIfUbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcCdvt,
              rmIfVbrNrtDefaultRxUpcCdvt, rmIfDirControlLinkShareMinAbr,
              rmIfDirControlLinkShareMaxAbr, rmIfDirControlLinkShareMinUbr,
              rmIfDirControlLinkShareMaxUbr
            }
    STATUS  obsolete -- superceded by atmRmPhyIfCfgMIBGroup4
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management configuration for physical interfaces."
    ::= { ciscoAtmRmMIBGroups 12 }

atmRmAllIfCfgMIBGroup2   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit,
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr,
              rmIfDirMaxVbrScr, rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr,
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, rmIfDirMaxUbrTolerance,
              rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, rmIfDirMaxVbrCdvt
            }
    STATUS  obsolete -- superceded by atmRmAllIfCfgMIBGroup3
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management configuration for all interfaces."
    ::= { ciscoAtmRmMIBGroups 13 }

atmRmAllIfCfgMIBGroup3   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit,
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr,
              rmIfDirMaxVbrScr, rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr,
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, rmIfDirMaxUbrTolerance,
              rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, rmIfDirMaxVbrCdvt,
              rmIfServCategorySupport
            }
    STATUS  obsolete -- superceded by atmRmAllIfCfgMIBGroup4
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management configuration for all interfaces."
    ::= { ciscoAtmRmMIBGroups 14 }

lsPerVcqAtmRmGroup2 OBJECT-GROUP
    OBJECTS { lsPerVcqRmIfMinWrrServiceClass, lsPerVcqRmIfServClassConnType,
              lsPerVcqRmIfServClassWrrWeight, lsPerVcqRmThreshGrpMaxSize,
              lsPerVcqRmThreshGrpQMaxSize, lsPerVcqRmThreshGrpQMinSize,
              lsPerVcqRmThreshGrpDiscThreshold, lsPerVcqRmThreshGrpMarkThreshold,
              lsPerVcqRmThreshGrpName, lsPerVcqRmThreshGrpCellCount,
              lsPerVcqRmThreshGrpServGroup,
              lsPerVcqRmHierarchicalSchedulingMode
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Resource
             Management status on platforms using the Lightstream
             per-VC queueing chipset."
    ::= { ciscoAtmRmMIBGroups 15 }

cgrPerVcqAtmRmGroup OBJECT-GROUP
    OBJECTS { cgrPerVcqRmThreshGrpQMaxSize, cgrPerVcqRmThreshGrpQMinSize,
              cgrPerVcqRmThreshGrpDiscThreshold, cgrPerVcqRmThreshGrpMarkThreshold,
              cgrPerVcqRmThreshGrpName, cgrPerVcqRmThreshGrpCellCount,
              cgrPerVcqRmThreshGrpServGroup,
              cgrPerVcqRmHierarchicalSchedulingMode
            }
    STATUS  obsolete -- superceded by cgrPerVcqAtmRmGroup2
    DESCRIPTION
            "A collection of objects which provide ATM Resource
             Management status on the Catalyst8540MSR platform."
    ::= { ciscoAtmRmMIBGroups 16 }

atmRmAllIfCfgMIBGroup4   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit,
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr,
              rmIfDirMaxVbrScr, rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr,
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, rmIfDirMaxUbrTolerance,
              rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, rmIfDirMaxVbrCdvt,
              rmIfServCategorySupport, rmIfCbrDefaultRxUpcTolerance, 
              rmIfVbrRtDefaultRxUpcTolerance, rmIfVbrNrtDefaultRxUpcTolerance,
              rmIfAbrDefaultRxUpcTolerance, rmIfUbrDefaultRxUpcTolerance, 
              rmIfVbrRtDefaultRxUpcCdvt, rmIfVbrNrtDefaultRxUpcCdvt 
            }
    STATUS  obsolete -- superceded by atmRmAllIfCfgMIBGroup5
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management configuration for all interfaces."
    ::= { ciscoAtmRmMIBGroups 17 }

atmRmPhyIfCfgMIBGroup4  OBJECT-GROUP
    OBJECTS { rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled,
              rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg,
              rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr,
              rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr,
              rmIfDirControlLinkShareMinAbr, rmIfDirControlLinkShareMaxAbr,
              rmIfDirControlLinkShareMinUbr, rmIfDirControlLinkShareMaxUbr
            }
    STATUS  obsolete -- superceded by atmRmPhyIfCfgMIBGroup5 
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management configuration for physical interfaces."
    ::= { ciscoAtmRmMIBGroups 18 }

atmRmPhyIfCfgMIBGroup5  OBJECT-GROUP
    OBJECTS { rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled,
              rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg,
              rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr,
              rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr,
              rmIfDirControlLinkShareMinAbr, rmIfDirControlLinkShareMaxAbr,
              rmIfDirControlLinkShareMinUbr, rmIfDirControlLinkShareMaxUbr,
              rmIfFramingOverhead, rmIfFramingOverheadForce
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM interface
             Resource Management configuration for physical interfaces."
    ::= { ciscoAtmRmMIBGroups 19 }

atmRmIfAllStateMIBGroup3  OBJECT-GROUP
    OBJECTS { rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr, 
              rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd, 
              rmIfScTxP2PeakCdv, rmIfScTxClr,rmIfScTxClrClp01,
              rmIfScRxDynBwSvcAcr, rmIfScTxDynBwSvcAcr
            }
    STATUS  current 
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management status for all interfaces."
    ::= { ciscoAtmRmMIBGroups 20 }

atmRmAllIfCfgMIBGroup5   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit,
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr,
              rmIfDirMaxVbrScr, rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr,
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, rmIfDirMaxUbrTolerance,
              rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, rmIfDirMaxVbrCdvt,
              rmIfServCategorySupport, rmIfCbrDefaultRxUpcTolerance, 
              rmIfVbrRtDefaultRxUpcTolerance, rmIfVbrNrtDefaultRxUpcTolerance,
              rmIfAbrDefaultRxUpcTolerance, rmIfUbrDefaultRxUpcTolerance, 
              rmIfVbrRtDefaultRxUpcCdvt, rmIfVbrNrtDefaultRxUpcCdvt,
              rmIfOverBooking
            }
    STATUS  deprecated -- superceded by atmRmAllIfCfgMIBGroup6
    DESCRIPTION
            "A collection of objects which provide ATM interface Resource
             Management configuration for all interfaces."
    ::= { ciscoAtmRmMIBGroups 21 }

cgrPerVcqAtmRmGroup2 OBJECT-GROUP
    OBJECTS { cgrPerVcqRmThreshGrpQMaxSize, cgrPerVcqRmThreshGrpQMinSize,
              cgrPerVcqRmThreshGrpDiscThreshold, cgrPerVcqRmThreshGrpMaxSize, 
              cgrPerVcqRmThreshGrpMarkThreshold, cgrPerVcqRmThreshGrpName, 
              cgrPerVcqRmThreshGrpCellCount, cgrPerVcqRmThreshGrpServGroup,
              cgrPerVcqRmHierarchicalSchedulingMode
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Resource
             Management status on the Catalyst8540MSR platform."
    ::= { ciscoAtmRmMIBGroups 22 }


atmRmTrafficShaperIfGroup  OBJECT-GROUP
    OBJECTS { rtsIfMaxThreshold, rtsIfCellCount,
              rtsIfVbrCfgRequested,
              rtsIfVbrCfgInstalled,
              rtsIfBeCfgRequested, 
              rtsIfBeCfgInstalled,
              rtsIfVbrClassMaxThrshRequested, 
              rtsIfVbrClassMaxThrshInstalled,
              rtsIfBeClassMaxThrshRequested, 
              rtsIfBeClassMaxThrshInstalled,
              rtsIfVbrVcMaxThrshRequested,
              rtsIfVbrVcMaxThrshInstalled,
              rtsIfBeVcMaxThrshRequested,
              rtsIfBeVcMaxThrshInstalled
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM Traffic Shaper 
             configuration and state information for ATM interfaces."
    ::= { ciscoAtmRmMIBGroups 23 }

atmRmAllIfCfgMIBGroup6   OBJECT-GROUP
    OBJECTS { rmIfLinkDistance, rmIfBestEffortLimit,
              rmIfDirMaxCbrPcr, rmIfDirMaxCbrTolerance, 
              rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
              rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr,
              rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
              rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, 
              rmIfDirMaxUbrMcr, rmIfDirMaxVbrCdvt,
              rmIfServCategorySupport, 
              rmIfCbrDefaultRxUpcTolerance,
              rmIfVbrRtDefaultRxUpcTolerance, 
              rmIfVbrNrtDefaultRxUpcTolerance,
              rmIfAbrDefaultRxUpcTolerance, 
              rmIfUbrDefaultRxUpcTolerance,
              rmIfVbrRtDefaultRxUpcCdvt, 
              rmIfVbrNrtDefaultRxUpcCdvt,
              rmIfOverBooking, 
              rmIfVbrRtPerClassOverbooking,
              rmIfVbrNrtPerClassOverbooking, 
              rmIfAbrPerClassOverbooking,
              rmIfUbrPerClassOverbooking
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which provide ATM 
             interface Resource Management configuration 
             for all interfaces."
    ::= { ciscoAtmRmMIBGroups 24 }

END