You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-CALL-RESOURCE-POOL-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-CALL-RESOURCE-POOL-MIB by vendor Cisco

CISCO-CALL-RESOURCE-POOL-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-CALL-RESOURCE-POOL-MIB.


Vendor: Cisco
Mib: CISCO-CALL-RESOURCE-POOL-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-CALL-RESOURCE-POOL-MIB.my:  Cisco Call Resource Pool MIB file.
--
-- Copyright (c) 1998, 1999 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--

CISCO-CALL-RESOURCE-POOL-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        TimeTicks,
        Integer32,
        Gauge32,
        Counter32
                FROM SNMPv2-SMI
        MODULE-COMPLIANCE, 
        OBJECT-GROUP
                FROM SNMPv2-CONF
        RowStatus,
        TruthValue,
        TEXTUAL-CONVENTION
                FROM SNMPv2-TC
        Unsigned32,
        CiscoRowOperStatus
                FROM CISCO-TC 
        SnmpAdminString
              	FROM SNMP-FRAMEWORK-MIB
        ciscoMgmt
                FROM CISCO-SMI;

ciscoCallResourcePoolMIB MODULE-IDENTITY
        LAST-UPDATED    "9811130000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-resource@cisco.com"
        DESCRIPTION
            "The MIB module for call resource pool management.

             This MIB supports the resource pool manager feature of
             CISCO IOS. This feature provides the ability to accept
             or reject calls based on DNIS numbers, resources required,
             user DNS domains, and counts of currently active sessions. 
            "
        REVISION        "9811130000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoMgmt 124 }



--        Overview of Call Resource Pool MIB
-- 
--        MIB description
-- 
--
--        The Call Resource Pool MIB provides the both configuration and
--        statistics for the entities associated with this feature. 
--        The following entities are managed:
--        1) DNIS Groups
--            A group of DNIS (Destination Number Identification Service)
--            numbers collected together and given a unique name.
--            Behavior is associated with DNIS groups rather than
--            individual DNIS numbers. DNIS numbers may be specified
--            with wild cards.
--        2) DNIS Group Call Types
--            Optional entries in this table allow specifying call types
--            to assign to calls arriving with a DNIS number in the group,
--            overriding the call's default type.
--        3) Call Discriminators
--            Provides filtering of calls based on DNIS number and bearer
--            capability. Allows NAS to not answer incoming calls matching
--            call discriminator definitions.
--        4) Resource Groups
--            Identifies a group of resources with common functionality
--            and capabilities. Examples are modems, voice DSPs, HDLC
--            framers. These are resources which are available to be
--            assigned to calls as needed, rather than hardwired to
--            specific interfaces.
--        5) Customer Profiles
--            Specifies simultaneous sessions, allowed overflow sessions,
--            DNIS groups used by that customer, resources to be used for
--            different bearer capabilities, VPDN group, etc.
--        6) VPDN Groups
--            Virtual Private Dial Network (VPDN) groups from the VPDN
--            MIB, may be associated with customer profiles, allowing
--            layer two tunnels to connect calls to customer home routers
--            rather than going directly to layer three routing at the NAS.
-- 
--
--        Relationships between the configuration tables.
--
--          |    Call     |    | Customer |____| Resource |
--          |Discriminator|    | Profile  |    |   Group  |
--                   \          /    \              \
--                    \        /      \              \
--                     \      /        \              \
--                      \/  \/          \/             \/
--                     | DNIS |      | VPDN  |    | Resource |
--                     |Group |      | Group |    |  Range   |
--                      /
--                     /
--                   \/
--            |DNIS Grp |
--            |Call Type|
--
 

--
--  Textual Conventions
--

CcrpPhoneNumber ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION
            "Text string representing a telephone number.
             Limited to numeric characters 0-9.
            "
        SYNTAX      OCTET STRING (SIZE (1..64))


CcrpPhoneNumberPattern ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION
            "Text string representing a telephone number and wild card
             characters. Limited to numeric characters 0-9 and the
             wild cards '.' and 'x'. Both wild card characters match
             single digits only.
            "
        SYNTAX      OCTET STRING (SIZE (1..64))


PhysicalPosition ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
            "A physical port  specification.
             An unsigned integer representing the
             slot and port within that slot.
             The value is generated as:

             slot*10^6 + port

             Examples:
               port 16 located in slot 7 would be
                  7*10^6 + 16 = 7,000,000 + 16 = 7,000,016

               port 0 located in slot 0 would be
                  0*10^6 + 0 = 0
        "
    SYNTAX       Unsigned32




-- Call Resource Pool MIB object definitions

cCallResourcePoolMIBObjects OBJECT IDENTIFIER ::=
                                    { ciscoCallResourcePoolMIB 1 }

-- Configuration objects

ccrpConfiguration           OBJECT IDENTIFIER ::=
                                    { cCallResourcePoolMIBObjects 1 }

ccrpGeneralConfig           OBJECT IDENTIFIER ::= { ccrpConfiguration 1 }
ccrpDnisConfig              OBJECT IDENTIFIER ::= { ccrpConfiguration 2 }
ccrpCallDiscriminatorConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 3 }
ccrpResourceConfig          OBJECT IDENTIFIER ::= { ccrpConfiguration 4 }
ccrpCustomerProfileConfig   OBJECT IDENTIFIER ::= { ccrpConfiguration 5 }


-- Statistics objects

ccrpStatistics              OBJECT IDENTIFIER ::=
                                    { cCallResourcePoolMIBObjects 2 }

ccrpCPStatistics           OBJECT IDENTIFIER ::= { ccrpStatistics 1 }
ccrpDnisStatistics         OBJECT IDENTIFIER ::= { ccrpStatistics 2 }
ccrpCDStatistics           OBJECT IDENTIFIER ::= { ccrpStatistics 3 }



--
-- General Configuration
--

ccrpNoCPCallTreatment OBJECT-TYPE
        SYNTAX      INTEGER {
                        noAnswer(1),
                        busy(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Value returned to the telco switch if call is to be
             rejected because it doesn't match any defined customer
             profile.

                 noAnswer(1) - ignore the call
                 busy(2)     - return busy

                "
        DEFVAL  {noAnswer}
        ::= { ccrpGeneralConfig 1 }

ccrpNoResourceCallTreatment OBJECT-TYPE
        SYNTAX      INTEGER {
                        channelNotAvailable(1),
                        busy(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Value returned to the telco switch if call is to be
             rejected because there is no available resource to
             answer the call.

                 channelNotAvailable(1) - return channel not available,
                           allowing switch to continue searching for
                           an available channel

                 busy(2) - return busy

                "
        DEFVAL  {channelNotAvailable}
        ::= { ccrpGeneralConfig 2 }


--
-- DNIS Group Configuration
--

ccrpDnisGroupTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpDnisGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "
                 Table of DNIS groups.  Each group is a list of
                 individual DNIS numbers.
                "
        ::= { ccrpDnisConfig 1 }
 
ccrpDnisGroupEntry OBJECT-TYPE
        SYNTAX      CcrpDnisGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing a single DNIS number
             for the DNIS group identified by the first index.
             A single DNIS number may not exist in more than one
             DNIS group.

             Entries in this table may be created and deleted via
             the ccrpDnisGroupRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpDnisGroupRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpDnisGroupRowStatus to
             'destroy'.

             Deleting the last entry for a specific value of
             ccrpDnisGroupName from this table will cause
             associated entries in the dependent tables to
             transition to a 'missingDependency' CiscoRowOperStatus.
            "         
        INDEX { ccrpDnisGroupName,
                IMPLIED ccrpDnisGroupMember }
        ::= { ccrpDnisGroupTable 1 }

CcrpDnisGroupEntry::=
        SEQUENCE {
            ccrpDnisGroupName             SnmpAdminString, 
            ccrpDnisGroupMember           CcrpPhoneNumberPattern,
            ccrpDnisGroupRowStatus        RowStatus
        }

ccrpDnisGroupName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for this DNIS group"
        ::= { ccrpDnisGroupEntry 1 }

ccrpDnisGroupMember OBJECT-TYPE
        SYNTAX      CcrpPhoneNumberPattern (SIZE (1..64))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "DNIS for member of this DNIS group.

             A single DNIS number may not be a member of
             more than one DNIS group.

             Creating a new entry using a DNIS number that
             already exists will fail.  The existing entry must
             be removed first, before creating a new entry under
             a different DNIS group name.
            "
        ::= { ccrpDnisGroupEntry 2 }

ccrpDnisGroupRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpDnisGroupEntry 3 }



--
-- DNIS Group Call Type Configuration
--

ccrpDnisGroupCallTypeTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpDnisGroupCallTypeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             This table is used specify a call type to calls
             arriving with a signaling protocol which does not
             provide bearer capability. An example is Channel
             Associated Signaling (CAS).

             A call arriving with a DNIS configured in a DNIS group
             in this table will be assigned the call type given
             here.
            "
        ::= { ccrpDnisConfig 2 }
 
ccrpDnisGroupCallTypeEntry OBJECT-TYPE
        SYNTAX      CcrpDnisGroupCallTypeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, identifying a call type to
             assign to calls within the DNIS group.

             Entries in this table may be created and deleted via
             the ccrpDnisGroupCallTypeRowStatus object or the
             management console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpDnisGroupCallTypeRowStatus to
             'createAndGo' or 'createAndWait'. Rows are deleted by
             a SET request setting the value of ccrpDnisGroupRowStatus
             to 'destroy'.

             Creating a new row with a value of ccrpDnisGroupName
             which does not yet exist in  ccrpDnisGroupTable will
             cause the new row's ccrpDnisGroupCallTypeOperStatus
             to have the value 'missingDependency'.

             Existing rows may be modified when the row is active.
            "         
        INDEX { IMPLIED ccrpDnisGroupName }
        ::= { ccrpDnisGroupCallTypeTable 1 }

CcrpDnisGroupCallTypeEntry::=
        SEQUENCE {
            ccrpDnisGroupCallType           INTEGER, 
            ccrpDnisGroupCallTypeOperStatus CiscoRowOperStatus,
            ccrpDnisGroupCallTypeRowStatus  RowStatus
        }

ccrpDnisGroupCallType OBJECT-TYPE
        SYNTAX      INTEGER {
                        digital(1),
                        speech(2),
                        undefined(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Call type to assign to calls arriving with
             DNIS number in this entry's DNIS group.
            "
        DEFVAL  {undefined}
        ::= { ccrpDnisGroupCallTypeEntry 1 }

ccrpDnisGroupCallTypeOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in
             ccrpDnisGroupTable.
                "
        ::= { ccrpDnisGroupCallTypeEntry 2 }

ccrpDnisGroupCallTypeRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpDnisGroupCallTypeEntry 3 }



--
-- Call Discriminator Configuration
--
 
ccrpCallDiscriminatorTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCallDiscriminatorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table of call discriminator definitions.

             A call discriminator enables call filtering based on
             call DNIS and call type.  Calls to a specific
             DNIS which have call types identified in the
             associated call discriminator definition will be
             rejected.
            "
        ::= { ccrpCallDiscriminatorConfig 1 }
 
ccrpCallDiscriminatorEntry OBJECT-TYPE
        SYNTAX      CcrpCallDiscriminatorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing information about a
             single call discriminator definition.

             Entries in this table may be created and deleted via
             the ccrpCDRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCDRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCDRowStatus to 'destroy'.


             Deleting an entry from this table will cause
             associated entries in dependent tables to transition
             to a 'missingDependency' CiscoRowOperStatus.

             Existing rows may be modified when the row is active.
            "
        INDEX { IMPLIED ccrpCDName }
        ::= { ccrpCallDiscriminatorTable 1 }

CcrpCallDiscriminatorEntry ::=
        SEQUENCE {
            ccrpCDName                SnmpAdminString, 
--            ccrpCDCallType            BITS,
            ccrpCDCallType            OCTET STRING,
            ccrpCDRowStatus           RowStatus
        }

ccrpCDName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for this call discriminator definition"
        ::= { ccrpCallDiscriminatorEntry 1 }

ccrpCDCallType OBJECT-TYPE
--        SYNTAX      BITS {
--                      digital(0),
--                      speech(1),
--                      v110(2),
--                      v120(3)
--                    }
        SYNTAX OCTET STRING(SIZE(1))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Indicates types of calls to be filtered by this
             call discriminator definition.

             This object is a bit map, with each bit representing
             a different call type as identified below.
             A 1-bit indicates that call type is filtered.
             A 0-bit indicates that call type is not filtered.

                 Bit 0   - Digital
                 Bit 1   - Speech
                 Bit 2   - V.110
                 Bit 3   - V.120

             Setting all defined bits to 1 would result in all calls
             being rejected by this call discriminator.
             Setting all defined bits to zero would result in all
             calls being accepted by this discriminator.
            "
--        DEFVAL {{}}
--        DEFVAL {'0000'h}
        ::= { ccrpCallDiscriminatorEntry 2 }

ccrpCDRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCallDiscriminatorEntry 3 }


-- Call Discriminator Group association
 
ccrpCDDiscriminatedGrpTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCDDiscriminatedGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             Table identifying the groups to which each
             call discriminator definition is applied.
            "
        ::= { ccrpCallDiscriminatorConfig 2 }
 
ccrpCDDiscriminatedGrpEntry OBJECT-TYPE
        SYNTAX      CcrpCDDiscriminatedGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry identifies a group to be discriminated
             by the call discriminator.  There may be multiple
             entries for the same call discriminator name.

             The same [group name, group type] pair may appear
             under multiple call discriminators.

             Entries in this table may be created and deleted via
             the ccrpCDDiscriminatedGroupRowStatus object or the
             management console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCDDnisGroupRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCDDnisGroupRowStatus to
             'destroy'.

             Creating a new row with a value of ccrpCDName which
             does not yet exist in ccrpCallDiscriminatorTable will
             cause the new row's ccrpCDDiscriminatedGroupOperStatus
             to have the value 'missingDependency'.
            "
        INDEX { ccrpCDName,
                ccrpCDDiscriminatedGroupName,
                ccrpCDDiscriminatedGroupType }
        ::= { ccrpCDDiscriminatedGrpTable 1 }

CcrpCDDiscriminatedGrpEntry ::=
        SEQUENCE {
            ccrpCDDiscriminatedGroupName       SnmpAdminString,
            ccrpCDDiscriminatedGroupType       INTEGER,
            ccrpCDDiscriminatedGroupOperStatus CiscoRowOperStatus,
            ccrpCDDiscriminatedGroupRowStatus  RowStatus
        }

ccrpCDDiscriminatedGroupName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for the group being discriminated
             If this is a DNIS group, the value of this object
             is the same as some value of ccrmDnisGroupName.
            "
        ::= { ccrpCDDiscriminatedGrpEntry 1 }

ccrpCDDiscriminatedGroupType OBJECT-TYPE
        SYNTAX      INTEGER {
                        dnis(1)
                    }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Indicates type of group being discriminated and
             the table where the value of ccrpCDDiscriminatedGroupName
             is defined.

                 dnis(1) - DNIS Group. Value in
                           ccrpCDDiscriminatedGroupName is same as
                           value of ccrpDnisGroupName in the
                           ccrpDnisGroupTable.
            "
        ::= { ccrpCDDiscriminatedGrpEntry 2 }

ccrpCDDiscriminatedGroupOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is currently only dependent on entries in
             ccrpDnisGroupTable.
            "
        ::= { ccrpCDDiscriminatedGrpEntry 3 }

ccrpCDDiscriminatedGroupRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             associated entries in other tables are also active.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCDDiscriminatedGrpEntry 4 }



--
-- Resource configuration
--

ccrpResourceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpResourceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             Table of resource group definitions.  Resources
             within a group have identical capabilities.

             Group membership or size is defined differently
             depending on the nature of the resource.

             Resources identified by physical locality (port-based)
             are specified with multiple ranges in the
             ccrpResourceRangeTable. 
                 
             Alternatively, groups consisting of non-port
             resources simply use a single limit to specify the
             size.

             The object ccrpResourcePortBased is used to indicate
             the resource type.

            "
        ::= { ccrpResourceConfig 1 }
 
ccrpResourceEntry OBJECT-TYPE
        SYNTAX      CcrpResourceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             An entry in the table, containing definition for
             a single resource group.

             Entries in this table may be created and deleted via
             the ccrpResourceGroupRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpResourceGroupRowStatus to
             'createAndGo' or 'createAndWait'. Rows are deleted by a
             SET request setting the value of
             ccrpResourceGroupRowStatus to 'destroy'.

             Deleting an entry from this table will cause
             associated entries in dependent tables to transition
             to a 'missingDependency' CiscoRowOperStatus.

             Existing rows may be modified when the row is active.
            "          
        INDEX { IMPLIED ccrpResourceName }
        ::= { ccrpResourceTable 1 }

CcrpResourceEntry ::=
        SEQUENCE {
            ccrpResourceName             SnmpAdminString, 
            ccrpResourcePortBased        TruthValue,
            ccrpResourceLimit            Unsigned32,
            ccrpResourceGroupOperStatus  CiscoRowOperStatus,
            ccrpResourceGroupRowStatus   RowStatus
        }
 
ccrpResourceName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for this physical resource"
        ::= { ccrpResourceEntry 1 }
 
ccrpResourcePortBased OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Indicates if the resources within this group are
             are port-based or not.

             Instantiating this with a value of false will also
             instantiate ccrpResourceLimit.
            "
        DEFVAL {true}
        ::= { ccrpResourceEntry 2 }
 
ccrpResourceLimit OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Specifies the size of this resource group for
             non-port based resources.

             This object is not instantiated for port-based
             resources.
            "
        DEFVAL {0}
        ::= { ccrpResourceEntry 3 }

ccrpResourceGroupOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in ccrpResourceRangeTable
             if the value of ccrpResourcePortBased is true.
            "
        ::= { ccrpResourceEntry 4 }

ccrpResourceGroupRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpResourceEntry 5 }


--
-- Resource Range Table
--

ccrpResourceRangeTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpResourceRangeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             Table of physical resource range definitions.  Resources
             within a group have identical capabilities. The hardware
             implementing the resources within a range must be of the
             same type.

             Multiple ranges may be associated with the same resource
             group. Each range within a single resource group must
             be of identical hardware type.

             A resource range may not be associated with multiple
             resource groups.

            "
        ::= { ccrpResourceConfig 2 }

ccrpResourceRangeEntry OBJECT-TYPE
        SYNTAX      CcrpResourceRangeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             An entry in the table, containing definition for
             a single physical resource range.

             Each entry specifies a contiguous range of individual
             resources using start and end identification.
             The individual resources within a range must be of the
             same type and capabilities.

             Entries in this table may be created and deleted via
             the ccrpResourceRangeRangeRowStatus object or the
             management console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpResourceRangeRowStatus to
             'createAndGo' or 'createAndWait'. Rows are deleted by a
             SET request setting the value of
             ccrpResourceRangeRowStatus to 'destroy'.

             Deleting the last entry for a specific value of
             ccrpResourceName from this table will cause
             the associated entry in the dependent ccrpResourceTable
             to transition to a 'missingDependency' CiscoRowOperStatus.

             Existing rows may be modified when the row is active.
            "          
        INDEX { ccrpResourceName,
                ccrpResourceRangeIndex }
        ::= { ccrpResourceRangeTable 1 }

CcrpResourceRangeEntry ::=
        SEQUENCE {
            ccrpResourceRangeIndex       Unsigned32, 
            ccrpResourceRangeStartPort   PhysicalPosition,
            ccrpResourceRangeEndPort     PhysicalPosition,
            ccrpResourceRangeOperStatus  CiscoRowOperStatus,
            ccrpResourceRangeRowStatus   RowStatus
        }

ccrpResourceRangeIndex OBJECT-TYPE
        SYNTAX      Unsigned32 (1..4294967295)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for this physical resource range within the
             resource group.
            "
        ::= { ccrpResourceRangeEntry 1 }

ccrpResourceRangeStartPort OBJECT-TYPE
        SYNTAX      PhysicalPosition
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "
             Range start for specifying resources within
             this range.

             The allowable values for each field within this
             object is system specific.

             The default value is
                   slot 0, port 0
            "
        DEFVAL {0}
        ::= { ccrpResourceRangeEntry 2 }
 
ccrpResourceRangeEndPort OBJECT-TYPE
        SYNTAX      PhysicalPosition
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "
             Range end for specifying resources within
             this range.

             The allowable values for each field within this
             object is system specific.

             The default value is
                   slot 0, port 0
            "
        DEFVAL {0}
        ::= { ccrpResourceRangeEntry 3 }
 
 ccrpResourceRangeOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in
             ccrpResourceGroupTable.
            "
        ::= { ccrpResourceRangeEntry 4 }

ccrpResourceRangeRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpResourceRangeEntry 5 }



--
-- Customer Profile Configuration
-- 
 
ccrpCustomerProfileTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCustomerProfileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table of customer profiles definitions.
            "
        ::= { ccrpCustomerProfileConfig 1 }
 
ccrpCustomerProfileEntry OBJECT-TYPE
        SYNTAX      CcrpCustomerProfileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing information about a
             single customer profile.

             Entries in this table may be created and deleted via
             the ccrpCPRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCPRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCPRowStatus to 'destroy'.


             Deleting an entry from this table will cause
             associated entries in dependent tables to transition
             to a 'missingDependency' CiscoRowOperStatus.

             Existing rows may be modified when the row is active.
            "
        INDEX { IMPLIED ccrpCPName }
        ::= { ccrpCustomerProfileTable 1 }

CcrpCustomerProfileEntry ::=
        SEQUENCE {
            ccrpCPName                     SnmpAdminString, 
            ccrpCPSessionLimit             Unsigned32,
            ccrpCPOverflow                 Integer32,
            ccrpCPRowStatus                RowStatus
        }


ccrpCPName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for this Customer Profile"
        ::= { ccrpCustomerProfileEntry 1 }


ccrpCPSessionLimit OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Simultaneous sessions limit for this customer profile.
             This is a soft limit if overflow is allowed as
             indicated in the object ccrpCPOverflow.

             The allowable value range is platform specific.
            "
        DEFVAL  { 0 }
        ::= { ccrpCustomerProfileEntry 2 }


ccrpCPOverflow OBJECT-TYPE
        SYNTAX      Integer32 (-1..2147483647)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Number of simultaneous sessions allowed over the
             value specified in ccrpCPSessionLimit.

             If this value is zero, no overflow is allowed and
             ccrpCPSessionLimit is a hard limit.

             If this value is -1, the is no overflow limit. All
             calls will be accepted, up to the exhaustion of
             system resources. 

             The allowable value range is platform specific.
            "
        DEFVAL  { 0 }
        ::= { ccrpCustomerProfileEntry 3 }

 
ccrpCPRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCustomerProfileEntry 4 }


-- Customer Profile DNIS Group association
 
ccrpCPDnisGrpTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCPDnisGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table identifying DNIS groups for each customer
             profile
            "
        ::= { ccrpCustomerProfileConfig 2 }
 
ccrpCPDnisGrpEntry OBJECT-TYPE
        SYNTAX      CcrpCPDnisGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry identifying a DNIS group for customer
             profile.  There may be multiple entries for the
             same customer profile name.  A single DNIS group may
             not be associated with more than one customer profile.

             Entries in this table may be created and deleted via
             the ccrpCPDnisGroupRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCPDnisGroupRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCPDnisGroupRowStatus to
             'destroy'.

             Creating a new row with values of ccrpCPName or
             ccrpDnisGroupName which do not yet exist in
             ccrpCustomerProfileTable or ccrpDnisGroupTable
             respectively will cause the new row's
             ccrpCPDnisGroupOperStatus to have the value
             'missingDependency'.

             Existing rows may be modified when the row is active.
            "          
        INDEX { ccrpCPName,
                IMPLIED ccrpDnisGroupName }
        ::= { ccrpCPDnisGrpTable 1 }

CcrpCPDnisGrpEntry ::=
        SEQUENCE {
            ccrpCPDnisGroupOperStatus         CiscoRowOperStatus,
            ccrpCPDnisGroupRowStatus          RowStatus
        }

ccrpCPDnisGroupOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in
             ccrpDnisGroupTable and ccrpCustomerProfileTable.
            "
        ::= { ccrpCPDnisGrpEntry 1 }

ccrpCPDnisGroupRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCPDnisGrpEntry 2 }


-- Customer Profile Resource Group association
 
ccrpCPResourceGrpTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCPResourceGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "
             Table identifying resources groups for each customer
             profile.
            "
        ::= { ccrpCustomerProfileConfig 3 }
 
ccrpCPResourceGrpEntry OBJECT-TYPE
        SYNTAX      CcrpCPResourceGrpEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "          
             Each entry identifying a resource group for a customer
             profile.  There may be multiple resource group entries
             for the same customer profile name.  A single resource
             group may be associated with more than one customer
             profile.

             Entries in this table may be created and deleted via
             the ccrpCPResourceRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCPResourceRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCPResourceRowStatus to
             'destroy'.

             Creating a new row with values of ccrpCPName or
             ccrpResourceName which do not yet exist in
             ccrpCustomerProfileTable or ccrpResourceTable
             respectively will cause the new row's
             ccrpCPDnisGroupOperStatus to have the value
             'missingDependency'.

             Existing rows may be modified when the row is active.
            "          
        INDEX { ccrpCPName,
                ccrpResourceName,
                ccrpCPResourceCallType }

        ::= { ccrpCPResourceGrpTable 1 }

CcrpCPResourceGrpEntry ::=
        SEQUENCE {
--            ccrpCPResourceCallType             BITS,
            ccrpCPResourceCallType             OCTET STRING,
            ccrpCPResourceServiceProfileName   SnmpAdminString,
            ccrpCPResourceOperStatus           CiscoRowOperStatus,
            ccrpCPResourceRowStatus            RowStatus
        }


ccrpCPResourceCallType OBJECT-TYPE
--        SYNTAX      BITS {
--                      digital(0),
--                      speech(1),
--                      v110(2),
--                      v120(3)
--                    }
        SYNTAX OCTET STRING(SIZE(1))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Indicates types of calls to assign to this resource
             for this customer profile.

             This object is a bit map, with each bit representing
             a different call type as identified below.
             A 1-bit indicates that call type is supported.
             A 0-bit indicates that call type is not supported.

             Bit 0   - Digital
             Bit 1   - Speech
             Bit 2   - V.110
             Bit 3   - V.120

             Setting all defined bits to 1 would result in this
             resource being available for all calls.
             Setting all defined bits to zero would result no
             calls being assigned to this resource.

             Q.931 specifies Bearer Capability associated with calls.
             RFC 2127, ISDN MIB defines the object isdnBearInfoType,
             combining Q.931 bearer capability information
             transfer capability and user rate.

             The correlation between Q.931 information transfer capability
             and call types is:
               Call Type        Q.931
               ---------        -----
               digital = {unrestricted digital, restricted digital}
               speech  = {speech, 3.1kHz audio, 7kHz audio}
               v110    = {Anything with V.110 User Info Layer}
               v120    = {Anything with V.120 User Info Layer}

             The Q.931 user info layer values of V.110 or V.120 override
             all other fields in determining resource manager call types.

             The remaining Q.931 transfer capabilities are not currently
             supported by resource manager.

             The mapping for RFC2127 is:
               Call Type        RFC2127
               ---------        -------
               digital = {unrestrictedDigital,unrestrictedDigital56,
                          restrictedDigital}
               speech  = {speech, audio31, audio7}
               v110    = {Not represented in RFC2127}
               v120    = {Not represented in RFC2127}

             The remaining RFC2127 values are not currently
             supported by resource manager.

            "
        ::= { ccrpCPResourceGrpEntry 1 }
        
ccrpCPResourceServiceProfileName   OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(0..23))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of service profile to apply to this resource
             whenever a new call matching the CP is assigned to
             the resource.

             Service profiles are defined via the management
             console on the system.

             Assigning a service profile is optional.
            "
        DEFVAL  {""}
        ::= { ccrpCPResourceGrpEntry 2 }

ccrpCPResourceOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in ccrpResourceTable
             and ccrpCustomerProfileTable.
            "
        ::= { ccrpCPResourceGrpEntry 3 }

ccrpCPResourceRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCPResourceGrpEntry 4 }


-- Customer Profile VPDN Group association
 
ccrpCPVGTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCPVGEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table identifying VPDN groups for customer
             profiles.
            "
        ::= { ccrpCustomerProfileConfig 4 }
 
ccrpCPVGEntry OBJECT-TYPE
        SYNTAX      CcrpCPVGEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "          
             Each entry identifies a VPDN group for a customer
             profile.

             Each customer profile may have multiple VPDN groups
             associated with it.

             A VPDN group may be associated with more than one
             customer profile.

             Entries in this table may be created and deleted via
             the ccrpCPVGRowStatus object or the management
             console on the system.

             Using SNMP, rows are created by a SET request setting
             the value of ccrpCPVGRowStatus to 'createAndGo'
             or 'createAndWait'. Rows are deleted by a SET request
             setting the value of ccrpCPVGRowStatus to 'destroy'.

             Creating a new row with a value of ccrpCPName
             which does not yet exist in ccrpCustomerProfileTable
             or a value of ccrpCPVGName which has not been
             configured will cause the new row's
             ccrpCPDnisGroupOperStatus to have the value
             'missingDependency'.

             Existing rows may be modified when the row is active.
            "          
        INDEX { ccrpCPName,
                IMPLIED ccrpCPVGName }
        ::= { ccrpCPVGTable 1 }

CcrpCPVGEntry ::=
        SEQUENCE {
            ccrpCPVGName                 SnmpAdminString,
            ccrpCPVGOperStatus           CiscoRowOperStatus,
            ccrpCPVGRowStatus            RowStatus
        }

ccrpCPVGName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..23))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Name for VPDN group for this customer profile.
            "
        ::= { ccrpCPVGEntry 1 }

ccrpCPVGOperStatus OBJECT-TYPE
        SYNTAX      CiscoRowOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A control object to indicate the operational status
             of this entry. This object is used to determine that
             the dependencies for this entry are valid and active.

             This entry is dependent on entries in the
             ccrpCustomerProfileTable and VPDN group in system
             configuration.
            "
        ::= { ccrpCPVGEntry 2 }

ccrpCPVGRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.

             An entry may not exist in the active(1) state unless
             all objects in the entry have an appropriate value.

             All values of RowStatus are allowed.
            "
        ::= { ccrpCPVGEntry 3 }




--
-- Resource Manager Statistics
--


-- Customer Profile Statistics
 
ccrpCPStatisticsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCPStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table of customer profile statistics.

             The information provided in this table may be used
             to better understand usage of network resources
             and improve capacity planning.
            "
        ::= { ccrpCPStatistics 1 }
 
ccrpCPStatisticsEntry OBJECT-TYPE
        SYNTAX      CcrpCPStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing statistics about a
             single customer profile.
         
             An entry is created for each customer profile within
             the ccrpCustomerProfileTable.
            "
        AUGMENTS { ccrpCustomerProfileEntry }
        ::= { ccrpCPStatisticsTable 1 }

CcrpCPStatisticsEntry ::=
        SEQUENCE {
            ccrpCPActiveSessions                    Gauge32,
            ccrpCPActiveOverflowSessions            Gauge32,
            ccrpCPTotalSessions                     Counter32,
            ccrpCPTotalOverflowSessions             Counter32,
            ccrpCPNumberOverflowState               Counter32,
            ccrpCPNumberMaxState                    Counter32,
            ccrpCPOverflowTime                      TimeTicks,
            ccrpCPMaxStateTime                      TimeTicks,
            ccrpCPPeakActiveSessions                Gauge32,
            ccrpCPOverflowRejected                  Counter32,
            ccrpCPResourceRejected                  Counter32
        }

ccrpCPActiveSessions OBJECT-TYPE
        SYNTAX      Gauge32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of active sessions for this customer profile."
        ::= { ccrpCPStatisticsEntry 1 }

ccrpCPActiveOverflowSessions OBJECT-TYPE
        SYNTAX      Gauge32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "
             Number of active sessions which are overflow sessions
             for this customer profile.
             Overflow sessions are those calls which arrived and
             were accepted when the customer profile's
             ccrpCPActiveSessions >= ccrpCPSessionLimit.
            "
        ::= { ccrpCPStatisticsEntry 2 }


ccrpCPTotalSessions OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of sessions for this customer profile
             since last system re-initialization.

             Includes non-overflow and overflow sessions.

             Includes all calls which were answered, including those
             which may have been terminated due to post-answer
             resource restrictions or authorization failures.
            "
        ::= { ccrpCPStatisticsEntry 3 }


ccrpCPTotalOverflowSessions OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of overflow sessions for this customer
             profile since last system re-initialization.

             Includes all calls which were answered and identified
             as overflow sessions, including those which may have
             been terminated due to post-answer resource limits
             or authorization failures.
            "
        ::= { ccrpCPStatisticsEntry 4 }

ccrpCPNumberOverflowState OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "occurrences"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times this customer profile has been in
             an overflow state since last system re-initialization.
             The customer profile is in overflow state when
             ccrpCPActiveSessions > ccrpCPSessionLimit.

             If overflow is not allowed for this profile, this value
             is always zero.
            "
        ::= { ccrpCPStatisticsEntry 5 }

ccrpCPNumberMaxState OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "occurrences"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times this customer profile has reached
             its maximum allowed active sessions, including
             overflow sessions since last system re-initialization.

             The customer profile is in maximum state under the
             following conditions:
               Overflow allowed and limited
                 ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
               Overflow not allowed
                 ccrpCPActiveSessions = ccrpCPSessionLimit.

             If overflow is allowed, but not limited by
             ccrpCPOverflow, this value will always be
             zero.
            "
        ::= { ccrpCPStatisticsEntry 6 }

ccrpCPOverflowTime OBJECT-TYPE
        SYNTAX TimeTicks
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The amount of time that this customer profile has been
             in overflow state since last system re-initialization.
             The customer profile is in overflow state when
             ccrpCPActiveSessions > ccrpCPSessionLimit.
            "
        ::= { ccrpCPStatisticsEntry 7 }
        
ccrpCPMaxStateTime OBJECT-TYPE
        SYNTAX TimeTicks
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The amount of time that this customer profile has reached
             its maximum allowed active sessions since last system re-
             initialization.

             The customer profile is in maximum state under the
             following conditions:
               Overflow allowed and limited
                 ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
               Overflow not allowed
                 ccrpCPActiveSessions = ccrpCPSessionLimit.

             If overflow is allowed, but not limited by
             ccrpCPOverflow, this value will always be
             zero.
            "
        ::= { ccrpCPStatisticsEntry 8 }
        
ccrpCPPeakActiveSessions OBJECT-TYPE
        SYNTAX      Gauge32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The maximum number of active sessions which has
             occurred for this customer profile since last system
             re-initialization. This is the maximum value of
             ccrpCPActiveSessions since last system
             re-initialization.

             This includes non-overflow and overflow sessions.

             The peak value for the overflow sessions may be
             computed by subtracting the value of ccrpCPSessionLimit
             from this value.
            "
        ::= { ccrpCPStatisticsEntry 9 }
        
ccrpCPOverflowRejected OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "call attempts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of calls rejected due to exceeding allowed
             simultaneous sessions for this customer
             profile since last system re-initialization.

             If overflow is not allowed for this profile, this
             counts the number of times calls arrived when
             ccrpCPActiveSessions = ccrpCPSessionLimit.

             If overflow is allowed, this counts the number of
             time calls arrived when
             ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflow.

             If overflow is allowed, but not limited by
             ccrpCPOverflow, this value is always zero.

             Includes calls which were answered, then terminated
             due to post-answer session counting restrictions for
             the customer profile.  Does not include calls
             terminated due to post-answer resource limits or
             post-answer authorization failures beyond customer
             profile authorizations.
            "
        ::= { ccrpCPStatisticsEntry 10 }

ccrpCPResourceRejected OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "call attempts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of calls rejected due to unavailable resources
             for this customer profile since last system
             re-initialization.

             Includes calls which were answered then terminated due
             to post-answer resource restrictions.
            "
        ::= { ccrpCPStatisticsEntry 11 }


-- DNIS Session Statistics
 
ccrpDnisStatisticsTableMaxEntries OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The limit on the number of entries that the
         ccrpDnisStatisticsTable may contain.

         When this table is full, any new DNIS values will be
         ignored.

         A value of 0 will prevent any DNIS statistics from being
         retained. If this value is set to 0 after entries already
         exist in the table, those entries will be deleted.

         Reducing the value will truncate the table based on the
         sort order of the index.

         The range for this value is from 0 to a system specific
         number specified by ccrpDnisStatisticsTableSystemMax.
        "
        DEFVAL  { 0 }
        ::= { ccrpDnisStatistics 1 }

ccrpDnisStatisticsTableSystemMax OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The system specific limit on the number of entries
         that the ccrpDnisStatisticsTable may contain.
         This is the maximum value that will be accepted for
         ccrpDnisStatisticsTableMaxEntries.
        "
        ::= { ccrpDnisStatistics 2 }

ccrpDnisStatisticsTableLengthExceeded OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times a new DNIS has been ignored due to
         the ccrpDnisStatisticsTableMaxLength having been reached
         since last system re-initialization.

         When the table is full, this counter is incremented
         both for each new DNIS arriving, as well as every time
         the same DNIS arrives. 
        "
        ::= { ccrpDnisStatistics 3 }

ccrpDnisStatisticsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpDnisStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table of session counts for individual DNIS numbers.

             The information provided in this table may be used
             to better understand usage of network resources
             and improve capacity planning.
            "
        ::= { ccrpDnisStatistics 4 }
 
ccrpDnisStatisticsEntry OBJECT-TYPE
        SYNTAX      CcrpDnisStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing session counts
             for a single DNIS number.

             The DNIS does not need to be a member of a DNIS
             group or be associated with a customer profile to
             appear in this table.

             Entries are created as a result of a call being
             received by the system with the DNIS number.
            "          
        INDEX { IMPLIED ccrpDnisStatisticsDnisNumber }
        ::= { ccrpDnisStatisticsTable 1 }

CcrpDnisStatisticsEntry ::=
        SEQUENCE {
            ccrpDnisStatisticsDnisNumber     CcrpPhoneNumber,
            ccrpDnisStatisticsGroupName      SnmpAdminString,
            ccrpDnisActiveSessions           Gauge32,
            ccrpDnisTotalSessions            Counter32,
            ccrpDnisPeakActiveSessions       Gauge32,
            ccrpDnisCallTypeRejected         Counter32
        }

ccrpDnisStatisticsDnisNumber OBJECT-TYPE
        SYNTAX      CcrpPhoneNumber
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "DNIS associated with call"
        ::= { ccrpDnisStatisticsEntry 1 }


ccrpDnisStatisticsGroupName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(0..23))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Name of DNIS group containing this DNIS. Value
             corresponds to ccrpDnisGroupName.

             If DNIS is not a member of a DNIS group, this value
             is a zero-length string.
            "
        ::= { ccrpDnisStatisticsEntry 2 }


ccrpDnisActiveSessions OBJECT-TYPE
        SYNTAX      Gauge32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of active sessions for this DNIS in the
             customer profile.
             Includes non-overflow and overflow sessions.
            "
        ::= { ccrpDnisStatisticsEntry 3 }


ccrpDnisTotalSessions OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of sessions for this DNIS in the
             customer profile since last system re-initialization.

             Includes non-overflow and overflow sessions.
             Includes all calls which were answered then terminated
             by post-answer restrictions for authorization
             failures.
            "
        ::= { ccrpDnisStatisticsEntry 4 }

        
ccrpDnisPeakActiveSessions OBJECT-TYPE
        SYNTAX      Gauge32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The maximum number of active sessions which has
             occurred for this DNIS since last system
             re-initialization.

             Includes non-overflow and overflow sessions.
            "
        ::= { ccrpDnisStatisticsEntry 5 }


ccrpDnisCallTypeRejected OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of calls with this DNIS which were rejected
             due to call type mismatch, as defined in the
             ccrpCallDiscriminatorTable, since last system
             re-initialization.
            "
        ::= { ccrpDnisStatisticsEntry 6 }


-- Call Discriminator Statistics
 
ccrpCDStatisticsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CcrpCDStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Table of call discriminator statistics.

             The information provided in this table may be used
             to better understand usage of network resources
             and improve capacity planning.
            "
        ::= { ccrpCDStatistics 1 }
 
ccrpCDStatisticsEntry OBJECT-TYPE
        SYNTAX      CcrpCDStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in the table, containing statistics about a
             single call discriminator definition.

             An entry is created for each call discriminator within
             the ccrpCallDiscriminatorTable.
            "
        AUGMENTS { ccrpCallDiscriminatorEntry }
        ::= { ccrpCDStatisticsTable 1 }

CcrpCDStatisticsEntry ::=
        SEQUENCE {
            ccrpCDRejected                    Counter32
        }

ccrpCDRejected OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "sessions"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of calls rejected due to matching this call
             discriminator definition, as defined in the
             ccrpCallDiscriminatorTable, since last system
             re-initialization.
            "
        ::= { ccrpCDStatisticsEntry 1 }




-- ******************************************************************
-- Notifications
-- ******************************************************************
ccrpMIBNotificationPrefix  OBJECT IDENTIFIER ::= { ciscoCallResourcePoolMIB 2 }


-- ******************************************************************
-- Conformance and Compliance
-- ******************************************************************
ccrpMIBConformance  OBJECT IDENTIFIER ::= { ciscoCallResourcePoolMIB 3 }

ccrpMIBCompliances  OBJECT IDENTIFIER ::= { ccrpMIBConformance 1 }
ccrpMIBGroups       OBJECT IDENTIFIER ::= { ccrpMIBConformance 2 }

-- compliance statements

ccrpMIBCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "The compliance statement for entities which
             implement the CISCO CALL RESOURCE POOL MIB"
        MODULE      -- this module
        MANDATORY-GROUPS
            { ccrpGeneralConfigGroup,
              ccrpDnisConfigGroup,
              ccrpCDConfigGroup,
              ccrpResourceConfigGroup,
              ccrpCPConfigGroup,
              ccrpCPStatisticsGroup,
              ccrpDnisStatisticsGroup,
              ccrpCDStatisticsGroup
            }

        ::= { ccrpMIBCompliances 1 }


-- units of conformance


ccrpGeneralConfigGroup OBJECT-GROUP
        OBJECTS {
            ccrpNoCPCallTreatment,
            ccrpNoResourceCallTreatment
        }
        STATUS      current
        DESCRIPTION
            "A collection of objects providing general Call Resource
             Pool configuration.
            "
        ::= { ccrpMIBGroups 1 }

ccrpDnisConfigGroup OBJECT-GROUP
        OBJECTS {
            ccrpDnisGroupRowStatus,
            ccrpDnisGroupCallType,
            ccrpDnisGroupCallTypeOperStatus,
            ccrpDnisGroupCallTypeRowStatus
        }
        STATUS      current
        DESCRIPTION
            "Objects for configuring a named collection of DNIS numbers.
            "
        ::= { ccrpMIBGroups 2 }

ccrpCDConfigGroup OBJECT-GROUP
        OBJECTS {
            ccrpCDCallType,
            ccrpCDRowStatus,
            ccrpCDDiscriminatedGroupOperStatus,
            ccrpCDDiscriminatedGroupRowStatus
        }
        STATUS      current
        DESCRIPTION
            "Objects for configuring a call discriminators.
            "
        ::= { ccrpMIBGroups 3 }

ccrpResourceConfigGroup OBJECT-GROUP
        OBJECTS {
            ccrpResourcePortBased,
            ccrpResourceLimit,
            ccrpResourceGroupOperStatus,
            ccrpResourceGroupRowStatus,
            ccrpResourceRangeStartPort,
            ccrpResourceRangeEndPort,
            ccrpResourceRangeOperStatus,
            ccrpResourceRangeRowStatus
        }
        STATUS      current
        DESCRIPTION
            "Objects for configuring resource groups.
            "
        ::= { ccrpMIBGroups 4 }

ccrpCPConfigGroup OBJECT-GROUP
        OBJECTS {
            ccrpCPSessionLimit,
            ccrpCPOverflow,
            ccrpCPRowStatus,
            ccrpCPDnisGroupOperStatus,
            ccrpCPDnisGroupRowStatus,
            ccrpCPResourceServiceProfileName,
            ccrpCPResourceOperStatus,
            ccrpCPResourceRowStatus,
            ccrpCPVGOperStatus,
            ccrpCPVGRowStatus
        }
        STATUS      current
        DESCRIPTION
            "Objects for configuring customer profiles.
            "
        ::= { ccrpMIBGroups 5 }

ccrpCPStatisticsGroup OBJECT-GROUP
        OBJECTS {
            ccrpCPActiveSessions,
            ccrpCPActiveOverflowSessions,
            ccrpCPTotalSessions,
            ccrpCPTotalOverflowSessions,
            ccrpCPNumberOverflowState,
            ccrpCPNumberMaxState,
            ccrpCPOverflowTime,
            ccrpCPMaxStateTime,
            ccrpCPPeakActiveSessions,
            ccrpCPOverflowRejected,
            ccrpCPResourceRejected
        }
        STATUS      current
        DESCRIPTION
            "Objects for providing customer profile statistics.
            "
        ::= { ccrpMIBGroups 6 }

ccrpDnisStatisticsGroup OBJECT-GROUP
        OBJECTS {
            ccrpDnisStatisticsTableMaxEntries,
            ccrpDnisStatisticsTableSystemMax,
            ccrpDnisStatisticsTableLengthExceeded,
            ccrpDnisStatisticsGroupName,
            ccrpDnisActiveSessions,
            ccrpDnisTotalSessions,
            ccrpDnisPeakActiveSessions,
            ccrpDnisCallTypeRejected
        }
        STATUS      current
        DESCRIPTION
            "Objects for providing DNIS statistics.
            "
        ::= { ccrpMIBGroups 7 }

ccrpCDStatisticsGroup OBJECT-GROUP
        OBJECTS {
            ccrpCDRejected
        }
        STATUS      current
        DESCRIPTION
            "Objects for providing call discriminator statistics.
            "
        ::= { ccrpMIBGroups 8 }

END

--=====================_922331918==_--