You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-GTP-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-GTP-CAPABILITY by vendor Cisco

CISCO-GTP-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-GTP-CAPABILITY.


Vendor: Cisco
Mib: CISCO-GTP-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- ********************************************************************
-- CISCO-GTP-CAPABILITY.my CISCO-GTP-MIB AGENT-CAPABILITIES
--
-- March 2002, Jeyachitra Alagar
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- ********************************************************************

CISCO-GTP-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoGtpCapability MODULE-IDENTITY
        LAST-UPDATED    "200304020900Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                        Postal: 170 West Tasman Drive
                                San Jose, CA  95134
                                USA
                                Tel: +1 800 553-NETS

                        E-mail: cs-gprs@cisco.com"
        DESCRIPTION
                "Agent capabilities for CISCO-GTP-MIB"
        REVISION        "200304020900Z"
        DESCRIPTION
                "Updated for GPRS R4.0 release."
        REVISION        "200203211600Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 263 }

cGtpCapabilityV12R02Rev08YD AGENT-CAPABILITIES
        PRODUCT-RELEASE  "Cisco IOS 12.2(8)YD"
        STATUS           current
        DESCRIPTION      "CISCO GTP MIB capabilities"
        SUPPORTS         CISCO-GTP-MIB
        INCLUDES         {
                          cGtpConfigurationsGroupRev1,
                          cGtpStatusGroupRev1,
                          cGtpStatisticsGroupRev1,
                          cGtpNotifGroup
                          }

        VARIATION        cGtpGSNService
        SYNTAX           BITS { sgsn(1) }
        DESCRIPTION      "SGSN GPRS service is not supported"

        VARIATION        cGtpVersion
        ACCESS           read-only
        DESCRIPTION      "Write Access not yet supported"

        VARIATION        cGtpT3TunnelTimer
        ACCESS           not-implemented
        DESCRIPTION      "Both read and write access are not supported"

        ::= { ciscoGtpCapability 1 }

cGtpCapabilityV12R02Rev08YY AGENT-CAPABILITIES

        PRODUCT-RELEASE  "Cisco IOS 12.2(8)YY"
        STATUS           current
        DESCRIPTION      "CISCO GTP MIB capabilities for GGSN R3.1."
        SUPPORTS         CISCO-GTP-MIB
        INCLUDES         {
                          cGtpConfigurationsGroupRev2,
                          cGtpStatusGroupRev1,
                          cGtpStatisticsGroupRev1,
                          cGtpNotifGroup
                          }

        VARIATION        cGtpGSNService
        SYNTAX           BITS { sgsn(1) }
        DESCRIPTION      "SGSN GPRS service is not supported"

        VARIATION        cGtpVersion
        ACCESS           read-only
        DESCRIPTION      "Write Access not yet supported"

        VARIATION        cGtpGSNAddressType
        SYNTAX           INTEGER {ipv4(1)} -- subset of InetAddressType
        DESCRIPTION
           "Only IPv4 Addresses are supported. IPv6 and DNS are
           not supported."

        ::= { ciscoGtpCapability 2 }

cGtpCapabilityV12R02Rev08YW AGENT-CAPABILITIES

        PRODUCT-RELEASE  "Cisco IOS 12.2(8)YW"
        STATUS           current
        DESCRIPTION      "CISCO GTP MIB capabilities for GGSN R4.0."
        SUPPORTS         CISCO-GTP-MIB
        INCLUDES         { cGtpConfigurationsGroupRev2,
                           cGtpStatusGroupRev3,
                           cGtpStatisticsGroupRev1,
                           cGtpNotifGroup
                         }
        VARIATION        cGtpGSNService
        SYNTAX           BITS { sgsn(1) }
        DESCRIPTION      "SGSN GPRS service is not supported"

        VARIATION        cGtpVersion
        ACCESS           read-only
        DESCRIPTION      "Write Access not yet supported"

        VARIATION        cGtpPathAddressType
        SYNTAX           INTEGER {ipv4(1)} -- subset of InetAddressType
        DESCRIPTION
           "Only IPv4 Addresses are supported. IPv6 and DNS are
           not supported."

        ::= { ciscoGtpCapability 3 }

END