CISCO-GTP-DIRECTOR-MIB device MIB details by Cisco
CISCO-GTP-DIRECTOR-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-GTP-DIRECTOR-MIB.
Vendor: | Cisco |
---|---|
Mib: | CISCO-GTP-DIRECTOR-MIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- $ID$ -- ******************************************************************** -- CISCO-GTP-DIRECTOR-MIB.my: MIB file for GTP Director Module -- -- September 2001, Jeyachitra Alagar -- -- Copyright (c) 2001 by cisco Systems, Inc. -- All rights reserved. -- ******************************************************************** -- $Endlog$ CISCO-GTP-DIRECTOR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Counter32, Unsigned32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI; ciscoGtpDirectorMIB MODULE-IDENTITY LAST-UPDATED "200109131400Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-gprs@cisco.com" DESCRIPTION "This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that specifies where the user is connecting. The APN identifies whether the network is a corporate network or a service provider network. The APN comprises of two parts, the network id and the operator id. The Single Access point feature enables the service provider to add new access-points to the GGSN without having to provision the HLR. The requests are sent by the SGSN to the same virtual APN. A virtual APN is not associated with any actual physical network. The GGSN processes the request and forwards the packet to the appropriate access-point that is specified in the PCO. The Single APN feature is supported only in Cisco GGSNs. The purpose of the GTP-Director is to provide a mechanism for service providers using non-Cisco GGSN to use the Single APN feature. This would enable the service providers to add access-point to the network without having to provision the HLR. This will be transparent to the SGSN. The mobile user initiates a connection request to the SGSN. The access-point name specified in the request is the virtual APN. The GTP-Director would resolve the access-point name and forward the request to the appropriate GGSN (real GGSN). +==+ +===+ +====+ ==== +===+ +====+ +===+ |MS|--|BSS|--|SGSN|--|PLMN|--|GDM|--|GGSN|--Gi-|PDN| +==+ +===+ +====+ ==== +===+ +====+ +===+ | | | | +====+ | |___|GGSN|------Gi | +====+ | | | | +====+ +===+ |_____|GGSN|--Gi-|PDN| +====+ +===+ The GTP-Director also provides load balancing across GGSNs. The GTP-Director uses the round-robin mechanism for providing load balancing. The Cisco GGSNs may use the GTP-Director, but is not necessary as they can use IOS-SLB ( Server Load Balancing ). Acronyms and terms: APN Access Point Name BSS Base Staion Subsystem GDM GTP Director Module GGSN Gateway GPRS Support Node Gi Reference point between GPRS and an external packet data network GPRS General Packet Radio Service HLR Home Location Register NMS Network Management System PCO Protocol Configuration Options PDN Packet Data Network PDP Packet Data Protocol PLMN Public Land Mobile Network MS Mobile Station SGSN Serving GPRS Support Node TID Tunnel Identifier " REVISION "200109131400Z" DESCRIPTION "Initial version of this MIB Module." ::= { ciscoMgmt 245 } ciscoGtpDirectorMIBObjects OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIB 1 } cgdConfigurations OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBObjects 1 } cgdStatus OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBObjects 2 } cgdStatistics OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBObjects 3 } cgdNotifMgmt OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBObjects 4 } -- -- Configuration -- cgdCreatePdpRequestInfoSaveTimer OBJECT-TYPE SYNTAX Unsigned32(1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "When a GDM receives a request to create PDP, it processes and forwards the request to the GGSN and saves the information related to the request. This object defines the time during which the information is maintained by the GDM. Any subsequent retries by the SGSN within this time period will be forwarded to the same GGSN, but the timer will not be reset if a retry occurs before it has expired. " DEFVAL { 30 } ::= { cgdConfigurations 1 } -- -- Status -- cgdPendingPdps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of create PDP requests whose connection retry timer has not expired. " ::= { cgdStatus 1 } -- -- Statistics -- cgdCreatePdpRequestFwded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of unique create PDP requests forwarded by the GDM to GGSN. This does not include the retransmissions. " ::= { cgdStatistics 1 } cgdTotalCreatePdpRequestFwded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of create PDP requests forwarded by the GDM to GGSN. This includes retransmissions too. " ::= { cgdStatistics 2 } cgdCreateRequestRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of create PDP requests rejected by the GGSN. " ::= { cgdStatistics 3 } cgdTotalUnsupportedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GDM does not support any signalling message other than create PDP request. If the GDM receives any unsupported signalling message, it will not be forwarded to GGSN and will be dropped. This object gives the total number of unsupported signalling messages received by the GDM. " ::= { cgdStatistics 4 } cgdPdpRequestDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of PDP requests dropped by the GDM due to routing failures, which occur, if the GTP is unable to pass the packet to IP. " ::= { cgdStatistics 5 } -- -- Notifications and Alarms -- cgdNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ciscoGtpDirectorNotifications notification will be sent when it is generated by the device. - 'true', will enable the device to send the notification. - 'false', will prevent the device from sending out the notification. " DEFVAL { false } ::= { cgdNotifMgmt 1 } cgdNotifType OBJECT-TYPE SYNTAX INTEGER { gdmServiceUp(1), --GDM service Enabled gdmServiceDown(2) --GDM service Disabled } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the type of notification. " ::= { cgdNotifMgmt 2 } -- -- Notification Definitions -- ciscoGtpDirectorNotifPrefix OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIB 2 } ciscoGtpDirectorNotifications OBJECT IDENTIFIER ::= { ciscoGtpDirectorNotifPrefix 0 } -- -- Notifications -- ciscoGtpDirectorNotification NOTIFICATION-TYPE OBJECTS { cgdNotifType } STATUS current DESCRIPTION "This notification indicates the occurrence of a GDM related alarm. " ::= { ciscoGtpDirectorNotifications 1 } -- -- Conformances definitions -- ciscoGtpDirectorMIBConformance OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIB 3 } ciscoGtpDirectorMIBCompliances OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBConformance 1 } ciscoGtpDirectorMIBGroups OBJECT IDENTIFIER ::= { ciscoGtpDirectorMIBConformance 2 } -- Conformance ciscoGtpDirectorMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statements for entities which implement CISCO-GDM-MIB. " MODULE -- this module MANDATORY-GROUPS { ciscoGtpDirectorConfigurationsGroup, ciscoGtpDirectorStatusGroup, ciscoGtpDirectorStatisticsGroup, ciscoGtpDirectorNotifMgmtGroup, ciscoGtpDirectorNotifGroup } ::= { ciscoGtpDirectorMIBCompliances 1 } -- Units of Conformance ciscoGtpDirectorConfigurationsGroup OBJECT-GROUP OBJECTS { cgdCreatePdpRequestInfoSaveTimer } STATUS current DESCRIPTION "A collection of GDM configuration objects. " ::= { ciscoGtpDirectorMIBGroups 1 } ciscoGtpDirectorStatusGroup OBJECT-GROUP OBJECTS { cgdPendingPdps } STATUS current DESCRIPTION "A collection of GDM status. " ::= { ciscoGtpDirectorMIBGroups 2 } ciscoGtpDirectorStatisticsGroup OBJECT-GROUP OBJECTS { cgdCreatePdpRequestFwded, cgdTotalCreatePdpRequestFwded, cgdCreateRequestRejected, cgdTotalUnsupportedMessages, cgdPdpRequestDropped } STATUS current DESCRIPTION "A collection of GDM Statistics. " ::= { ciscoGtpDirectorMIBGroups 3 } ciscoGtpDirectorNotifMgmtGroup OBJECT-GROUP OBJECTS { cgdNotifEnable, cgdNotifType } STATUS current DESCRIPTION " A collection of objects related with notification management on GDM." ::= { ciscoGtpDirectorMIBGroups 4 } ciscoGtpDirectorNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoGtpDirectorNotification } STATUS current DESCRIPTION "A collection of notifications. " ::= { ciscoGtpDirectorMIBGroups 5 } END