You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-HC-ALARM-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-HC-ALARM-CAPABILITY by vendor Cisco

CISCO-HC-ALARM-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-HC-ALARM-CAPABILITY.


Vendor: Cisco
Mib: CISCO-HC-ALARM-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-HC-ALARM-CAPABILITY.my:
-- Cisco HC-ALARM-MIB AGENT-CAPABILITIES
--
-- March 2004, Thomas Wu
--
-- Copyright (c) 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-HC-ALARM-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        OwnerString
                FROM RMON-MIB
        StorageType
                FROM SNMPv2-TC
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoHcAlarmCapability MODULE-IDENTITY
        LAST-UPDATED    "200403220000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of HC-ALARM-MIB."

        REVISION        "200403220000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 398 }

ciscoHcAlarmCapCatOSV08R0401 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.4(1)."
    STATUS              current
    DESCRIPTION         "HC-ALARM-MIB capabilities."

    SUPPORTS            HC-ALARM-MIB
        INCLUDES        {
                           hcAlarmControlGroup,
                           hcAlarmCapabilitiesGroup,
                           hcAlarmNotificationsGroup
                        }

        VARIATION        hcAlarmOwner
            SYNTAX       OwnerString (SIZE (1..20))
            DESCRIPTION  "Implementation only supports
                          1 to 20 octets."

        VARIATION        hcAlarmStorageType
            SYNTAX       StorageType { volatile(2),
                                   nonVolatile(3) }
            DESCRIPTION  "Implementation only supports
                          volatile(2) and nonVolatile(3)."

    ::= { ciscoHcAlarmCapability 1 }

END