You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-HSRP-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-HSRP-CAPABILITY by vendor Cisco

CISCO-HSRP-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-HSRP-CAPABILITY.


Vendor: Cisco
Mib: CISCO-HSRP-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
CISCO-HSRP-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoHsrpCapability MODULE-IDENTITY
                LAST-UPDATED    "9808250000Z"
                ORGANIZATION    "Cisco Systems, Inc."
                CONTACT-INFO
                        "       Cisco Systems
                                Customer Service

                        Postal: 170 West Tasman Drive
                                San Jose, CA  95134
                                USA

                           Tel: +1 800 553-NETS

                        E-mail: cs-hsrp@cisco.com"
                DESCRIPTION
                        "Agent capabilities for CISCO-HSRP-MIB"
                REVISION        "9808250000Z"
                DESCRIPTION
                        "Initial version of this MIB module."
        ::= { ciscoAgentCapability 10000 }
ciscoHsrpCapabilityV12R0 AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco IOS 12.0(3)T"
STATUS          current
DESCRIPTION     "Cisco Hsrp MIB capabilities"

SUPPORTS        CISCO-HSRP-MIB
INCLUDES        { cHsrpGlobalConfig, cHsrpGroup }

VARIATION	cHsrpConfigTimeout
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpAuth
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpPriority
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpPreempt
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpPreemptDelay
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpConfiguredHelloTime
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpConfiguredHoldTime
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpVirtualIpAddr
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

VARIATION	cHsrpGrpEntryRowStatus
ACCESS		read-only
DESCRIPTION	"Unable to create or modify"

        ::= { ciscoHsrpCapability 1 }

END