You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-IF-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-IF-CAPABILITY by vendor Cisco

CISCO-IF-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-IF-CAPABILITY.


Vendor: Cisco
Mib: CISCO-IF-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-IF-CAPABILITY.my: Cisco IF-MIB AGENT-CAPABILITIES
--
-- February 2004, Yizhong Shen
--
-- Copyright (c) 1998, 2000, 2002, 2003, 2004 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-IF-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        DisplayString,
        TruthValue
                FROM SNMPv2-TC
        ciscoAgentCapability
                FROM CISCO-SMI;   

ciscoIfCapability MODULE-IDENTITY
    LAST-UPDATED    "200402200000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO  
        "       Cisco Systems
                Customer Service

               Postal: 170 West Tasman Drive
               San Jose, CA  95134
               USA

               Tel: +1 800 553-NETS

               E-mail: cs-snmp@cisco.com"
    DESCRIPTION
       "Agent capabilities for IF-MIB"

    REVISION        "200402200000Z"
    DESCRIPTION
        "Added ciscoIfCapabilityV5R00 agent capabilities for MGX
         product series: MPSM Service Module and VXSM (Voice Switch
         Service Module."
     
    REVISION        "200303140000Z"
    DESCRIPTION
        "Added following Agent capabilities for MGX product series:

         - ciscoIfCapabilityV4R00 for
           AXSM 10 Gig. Module (AXSM-XG) and 
           AXSM Enhanced Module (AXSM-E)."       

    REVISION        "200206120000Z"
    DESCRIPTION
        "Added following Agent capabilities for MGX product series:

         - ciscoIfCapabilityPxmVR200 for 
           PXM(Processor Switch Module) Module

         - ciscoIfCapabilityAxsmVR200 for 
           AXSM(ATM Switch Service Module)

         - ciscoIfCapabilityAxsmeV21R60 for 
           AXSM Enhanced Module.

         - ciscoIfCapabilityFrsm12V3R00 for
           Frame Relay Service Module(FRSM-12)."

        REVISION        "200002090000Z"
        DESCRIPTION
            "Modification of ifCounterDiscontinuityTime,
             ifTableLastChange object and LinkUp/Down trap
             objects."
        REVISION        "9811160000Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { ciscoAgentCapability 125 }

ciscoIfCapabilityV11R03 AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco IOS 11.3"
STATUS          current
DESCRIPTION     "IF MIB capabilities"

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup, ifStackGroup2,
                  ifFixedLengthGroup, ifHCFixedLengthGroup, 
                  ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
                  ifRcvAddressGroup, ifOldObjectsGroup }

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
ACCESS          read-write
DESCRIPTION     "Can not be written in case of atm/aal5
                sublayers on an ATM end system, LEC subinterfaces,
                aal5 sublayer of an ATM switch CPU interface, 
                ATM 2000 physical interface and lex based interfaces 
                used for accounting."

VARIATION       ifOperStatus
SYNTAX          INTEGER { 
                    up(1),
                    down(2),
                    testing(3),
                    unknown(4),
                    dormant(5) 
                }
-- no            { notPresent(6), lowerLayerDown(7) }
DESCRIPTION     "Unable to detect all states."

VARIATION       ifLastChange
ACCESS          read-only
DESCRIPTION     "Supported in physical interfaces, lex based interfaces
                used for accounting. In case of subinterfaces, the value
                returned will be the sysuptime when the subinterface
                registered with ifmib."
 
VARIATION       ifInOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM end system.
                Supported in physical interfaces, lex based interfaces,
                aal5 sublayer of an ATM switch CPU interface,  
                aal5 sublayer on the atm interfaces of an ATM 
                end system, AIP type aal5 sublayer on an ATM
                end system and in frame-relay, x25,
                aflane subinterfaces." 

VARIATION       ifInUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces, 
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces, 
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifInNUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifInErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifInUnknownProtos
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical 
                interfaces, lex based interfaces, aal5 
                sublayer of an ATM switch CPU interface, 
                aflane sublayers."

VARIATION       ifOutOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM end system.
                Supported in physical interfaces, lex based interfaces,
                aal5 sublayer of an ATM switch CPU interface,  
                aal5 sublayer on the atm interfaces of an ATM 
                end system, AIP type aal5 sublayer on an ATM 
                end system and in frame-relay, x25,
                aflane subinterfaces." 

VARIATION       ifOutUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifOutNUcastPkts
ACCESS          read-only                          
DESCRIPTION     "Supported in physical interfaces, lex based accounting
                interfaces and in aflane subinterfaces."

VARIATION       ifOutDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifOutErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface, aflane sublayers."

VARIATION       ifOutQLen
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifSpecific
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifInBroadcastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."
 
VARIATION       ifOutMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifOutBroadcastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCInOctets
ACCESS          read-only 
DESCRIPTION     "Supported in LEC sublayers only."

VARIATION       ifHCInUcastPkts
ACCESS          not-implemented
DESCRIPTION     "Not supported." 

VARIATION       ifHCInMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCInBroadcastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutOctets
ACCESS          read-only
DESCRIPTION     "Supported in LEC sublayers only."

VARIATION       ifHCOutUcastPkts
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifHCOutMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutBroadcastPkts
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-write
DESCRIPTION     "Only physical interfaces can have link traps enabled.
                Hardwired on subinterfaces and on lex based interfaces
                used for accounting to be false."

VARIATION       ifPromiscuousMode
SYNTAX          TruthValue
ACCESS          read-only
DESCRIPTION     "Not writable, hardcoded to false (2)."   

VARIATION       ifConnectorPresent
ACCESS          read-only 
DESCRIPTION     "Hardcoded to be true for controller 
                type sub-interfaces and to be false for
                all other sub-interfaces."  

VARIATION       ifAlias
SYNTAX          DisplayString (SIZE(0..64))
ACCESS          read-write
DESCRIPTION     "For interfaces that are not being nv written,
                the ifAlias value is lost when the system is
                reloaded."

VARIATION       ifCounterDiscontinuityTime
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifStackStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported.
                Unable to detect all states."

VARIATION       ifRcvAddressAddress
-- ACCESS       read-only 
DESCRIPTION     "Read-only access is added to this object. 
                 Supported in physical interfaces, lex based
                 interfaces and in lec sublayers."

VARIATION       ifRcvAddressStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported. Unable to detect 
                all states.  Supported in physical interfaces,
                lex based interfaces and in lec sublayers."

VARIATION       ifRcvAddressType
SYNTAX          INTEGER { other(1) }
-- no            { volatile, nonVolatile }
ACCESS          read-only
DEFVAL          { other }
-- not           { volatile } 
DESCRIPTION     "Write/create not supported. Unable to detect 
                all states.  Default value is { other }.
                Supported in physical interfaces,
                lex based interfaces and in lec sublayers."

VARIATION       ifTestId
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestStatus
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestType
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestResult
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestCode
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestOwner
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       linkUp -- TRAP-TYPE
--              OBJECTS { ifIndex, ifDescr, ifType, locIfReason }
DESCRIPTION     "A linkUp trap signifies that the sending 
                protocol entity recognizes that one of the
                communication links represented in the agent's
                configuration has come up."

VARIATION       linkDown -- TRAP-TYPE
--              OBJECTS { ifIndex, ifDescr, ifType, locIFReason }
DESCRIPTION     "A linkDown trap signifies that the sending 
                protocol entity recognizes a failure in one of  
                the communication links represented in the 
                agent's configuration."

    ::= { ciscoIfCapability 1 } 
 
ciscoIfCapabilityV12R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco IOS 12.0"
STATUS          current
DESCRIPTION     "IF MIB capabilities"

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup, ifStackGroup2, 
                  ifFixedLengthGroup, ifHCFixedLengthGroup, 
                  ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
                  ifRcvAddressGroup, ifOldObjectsGroup 
                }

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
ACCESS          read-write
DESCRIPTION     "Can not be written in case of atm/aal5 sublayers 
                on an ATM end system, LEC subinterfaces, aal5
                sublayer of an ATM switch CPU interface, ATM 2000
                physical interface and lex based interfaces used 
                for accounting."

VARIATION       ifOperStatus
SYNTAX          INTEGER { up(1), down(2), testing(3),
                          unknown(4), dormant(5) }
-- no            { notPresent(6), lowerLayerDown(7) }
DESCRIPTION     "Unable to detect all states."

VARIATION       ifLastChange
ACCESS          read-only
DESCRIPTION     "Supported in physical interfaces, lex based interfaces
                used for accounting and in cable, mc3810_dsx1, voice 
                subinterfaces."

--               ifIn* counters return 0 in case of cable downstream
--               subinterface and ifOut* counters return 0 
--               in case of cable upstream interface as per rf mib.

VARIATION       ifInOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM 
                end system.  Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an
                ATM switch CPU interface,  aal5 sublayer on 
                the atm interfaces of an ATM end system, 
                AIP type aal5 sublayer on an ATM end system and in 
                frame-relay, x25, aflane, cable subinterfaces." 

VARIATION       ifInUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane, cable 
                subinterfaces."

VARIATION       ifInNUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifInErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces, 
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifInUnknownProtos
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM end system.
                Supported in physical interfaces, lex based interfaces,
                aal5 sublayer of an ATM switch CPU interface,  
                aal5 sublayer on the atm interfaces of an ATM
                end system, AIP type aal5 sublayer on an ATM
                end system and in frame-relay, x25, aflane,
                cable subinterfaces." 

VARIATION       ifOutUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutNUcastPkts
ACCESS          read-only                          
DESCRIPTION     "Supported in physical interfaces, lex based accounting
                interfaces and in aflane subinterfaces."

VARIATION       ifOutDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane, 
                cable subinterfaces."

VARIATION       ifOutQLen
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifSpecific
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInMulticastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifInBroadcastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."
 
VARIATION       ifOutMulticastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifOutBroadcastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifHCInOctets
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces and 
                LEC sub-layers." 

VARIATION       ifHCInUcastPkts
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces." 

VARIATION       ifHCInMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCInBroadcastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutOctets
ACCESS          read-only
DESCRIPTION     "Supported in physical interfaces and 
                in LEC sub-layers."

VARIATION       ifHCOutUcastPkts
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces."

VARIATION       ifHCOutMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutBroadcastPkts
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-write
DESCRIPTION     "Physical interfaces and subinterfaces can have link
                traps enabled. Write not supported in lex based 
                interfaces used for accounting and the object is 
                hardwired to be false." 

VARIATION       ifPromiscuousMode
SYNTAX          TruthValue
ACCESS          read-only
DESCRIPTION     "Not writable, hardcoded to false (2)."   

VARIATION       ifConnectorPresent
ACCESS          read-only 
DESCRIPTION     "Hardcoded to be false on lex based interfaces
                used for accounting." 

VARIATION       ifAlias
SYNTAX          DisplayString (SIZE(0..64))
ACCESS          read-write
DESCRIPTION     "For interfaces that are not being nv written,
                the ifAlias value is lost when the system 
                is reloaded."

VARIATION       ifCounterDiscontinuityTime
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifStackStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported. 
                Unable to detect all states."

VARIATION       ifRcvAddressAddress
-- ACCESS       read-only 
DESCRIPTION     "Read-only access is added to this object.
                Supported in physical interfaces, 
                lex based interfaces and in lec 
                sublayers."

VARIATION       ifRcvAddressStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported. Unable to 
                detect all states.  Supported in physical 
                interfaces, lex based interfaces and in 
                lec sublayers."

VARIATION       ifRcvAddressType
SYNTAX          INTEGER { other(1) }
-- no            { volatile, nonVolatile }
ACCESS          read-only
DEFVAL          { other }
-- not           { volatile } 
DESCRIPTION     "Write/create not supported. Unable to detect
                all states.  Default value is { other }. 
                Supported in physical interfaces, lex based
                interfaces and in lec sublayers."

VARIATION       ifTestId
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestStatus
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestType
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestResult
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestCode
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestOwner
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       linkUp -- TRAP-TYPE
--              OBJECTS { ifIndex, ifDescr, ifType, locIfReason }
DESCRIPTION     "A linkUp trap signifies that the sending 
                protocol entity recognizes that one of the
                communication links represented in the agent's
                configuration has come up."

VARIATION       linkDown -- TRAP-TYPE
--              OBJECTS { ifIndex, ifDescr, ifType, locIFReason }
DESCRIPTION     "A linkDown trap signifies that the sending 
                protocol entity recognizes a failure in one of  
                the communication links represented in the 
                agent's configuration."

    ::= { ciscoIfCapability 2 }

ciscoIfCapabilityV12R01T AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco IOS 12.1T"
STATUS          current
DESCRIPTION     "IF MIB capabilities"

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup, ifStackGroup2,
                  ifFixedLengthGroup, ifHCFixedLengthGroup, 
                  ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
                  ifRcvAddressGroup, ifOldObjectsGroup 
                }

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "OIR instances need to be modified"

VARIATION       ifAdminStatus
ACCESS          read-write
DESCRIPTION     "Can not be written in case of atm/aal5 sublayers 
                on an ATM end system, LEC subinterfaces, aal5 
                sublayer of an ATM switch CPU interface, ATM 2000
                physical interface and lex based interfaces 
                used for accounting."

VARIATION       ifOperStatus
SYNTAX          INTEGER { up(1), down(2), testing(3),
                          unknown(4), dormant(5) }
-- no            { notPresent(6), lowerLayerDown(7) }
DESCRIPTION     "Unable to detect all states."

VARIATION       ifLastChange
ACCESS          read-only
DESCRIPTION     "Supported in physical interfaces, lex based 
                interfaces used for accounting and in cable, 
                mc3810_dsx1, voice subinterfaces."

--               ifIn* counters return 0 in case of cable downstream
--               subinterface and ifOut* counters return 0 
--               in case of cable upstream interface as per rf mib.

VARIATION       ifInOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM end system.
                Supported in physical interfaces, lex based interfaces,
                aal5 sublayer of an ATM switch CPU interface,  
                aal5 sublayer on the atm interfaces of an ATM
                end system, AIP type aal5 sublayer on an ATM
                end system and in frame-relay, x25,
                aflane, cable subinterfaces." 

VARIATION       ifInUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an 
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifInNUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifInErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces, 
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifInUnknownProtos
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutOctets
ACCESS          read-only 
DESCRIPTION     "Not supported in atm sublayer on an ATM end system.
                Supported in physical interfaces, lex based interfaces,
                aal5 sublayer of an ATM switch CPU interface,  
                aal5 sublayer on the atm interfaces of an 
                ATM end system, AIP type aal5 sublayer on an
                ATM end system and in frame-relay, x25,
                aflane, cable subinterfaces." 

VARIATION       ifOutUcastPkts
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutNUcastPkts
ACCESS          read-only                          
DESCRIPTION     "Supported in physical interfaces, lex based 
                accounting interfaces and in aflane subinterfaces."

VARIATION       ifOutDiscards
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutErrors
ACCESS          read-only
DESCRIPTION     "Not supported in frame-relay subinterfaces,
                x25 subinterfaces, atm/aal5 sublayers on an
                ATM end system. Supported in physical interfaces,
                lex based interfaces, aal5 sublayer of an ATM
                switch CPU interface and in aflane,
                cable subinterfaces."

VARIATION       ifOutQLen
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifSpecific
ACCESS          read-only
DESCRIPTION     "Not supported in subinterfaces."

VARIATION       ifInMulticastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifInBroadcastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."
 
VARIATION       ifOutMulticastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifOutBroadcastPkts
ACCESS          read-only
DESCRIPTION     "Supported in cable subinterface."

VARIATION       ifHCInOctets
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces and 
                LEC sub-layers." 

VARIATION       ifHCInUcastPkts
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces." 

VARIATION       ifHCInMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCInBroadcastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutOctets
ACCESS          read-only
DESCRIPTION     "Supported in physical interfaces and 
                in LEC sub-layers."

VARIATION       ifHCOutUcastPkts
ACCESS          read-only 
DESCRIPTION     "Supported in physical interfaces."

VARIATION       ifHCOutMulticastPkts
ACCESS          not-implemented 
DESCRIPTION     "Not supported."

VARIATION       ifHCOutBroadcastPkts
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-write
DESCRIPTION     "Physical interfaces and subinterfaces can have link
                traps enabled. Write not supported in lex based 
                interfaces used for accounting and the object is 
                hardwired to be false." 

VARIATION       ifPromiscuousMode
SYNTAX          TruthValue
ACCESS          read-only
DESCRIPTION     "Not writable, hardcoded to false (2)."   

VARIATION       ifConnectorPresent
ACCESS          read-only 
DESCRIPTION     "Hardcoded to be false on lex based 
                interfaces used for accounting." 

VARIATION       ifAlias
SYNTAX          DisplayString (SIZE(0..64))
ACCESS          read-write
DESCRIPTION     "For interfaces that are not being nv written,
                the ifAlias value is lost when the system 
                is reloaded."

VARIATION       ifStackStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported.
                Unable to detect all states."

VARIATION       ifRcvAddressAddress
-- ACCESS       read-only 
DESCRIPTION     "Read-only access is added to this object. 
                 Supported in physical interfaces, lex based 
                 interfaces and in lec sublayers."

VARIATION       ifRcvAddressStatus
SYNTAX          INTEGER { active(1) } -- subset of RowStatus 
ACCESS          read-only
DESCRIPTION     "Write/create not supported. Unable to detect
                all states.  Supported in physical interfaces,
                lex based interfaces and in lec sublayers."

VARIATION       ifRcvAddressType
SYNTAX          INTEGER { other(1) }
-- no            { volatile, nonVolatile }
ACCESS          read-only
DEFVAL          { other }
-- not           { volatile } 
DESCRIPTION     "Write/create not supported. Unable to detect 
                all states.  Default value is { other }.
                Supported in physical interfaces,
                lex based interfaces and in lec sublayers."

VARIATION       ifTestId
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestStatus
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestType
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestResult
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestCode
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       ifTestOwner
ACCESS          not-implemented
DESCRIPTION     "Table for ifTestEntry not supported."

VARIATION       linkUp -- TRAP-TYPE
--              OBJECTS { ifIndex, ifAdminStatus, ifOperStatus,
--                        ifDescr, ifType, locIfReason }
DESCRIPTION     "A linkUp trap signifies that the sending 
                protocol entity recognizes that one of the
                communication links represented in the agent's
                configuration has come up. When a new config 
                command 'snmp-server trap link ietf' is set, the
                varbind list is made of objects specified here. 
                Otherwise, the varbind list defined in the 
                previous version holds good. For sub-interfaces,
                as there is no support for locIfReason, it will
                be omitted from the trap message."

VARIATION       linkDown -- TRAP-TYPE
--              OBJECTS { ifIndex, ifAdminStatus, ifOperStatus,
--                        ifDescr, ifType, locIFReason }
DESCRIPTION     "A linkDown trap signifies that the sending 
                protocol entity recognizes a failure in one of  
                the communication links represented in the 
                agent's configuration. When a new config 
                command 'snmp-server trap link ietf' is set, the
                varbind list is made of objects specified here. 
                Otherwise, the varbind list defined in the 
                previous version holds good. For sub-interfaces,
                as there is no support for locIfReason, it will 
                be omitted from the trap message."

    ::= { ciscoIfCapability 3 }

ciscoIfCapabilityPxmVR200 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 2.00,BPX SES Release 1.00."
STATUS          current
DESCRIPTION     "IF MIB capabilities for PXM45, PXM1 Modules."

SUPPORTS         IF-MIB
INCLUDES         { ifGeneralInformationGroup, ifPacketGroup }

VARIATION        ifTableLastChange
ACCESS           not-implemented
DESCRIPTION      "Not supported."

VARIATION        ifAdminStatus
DESCRIPTION      "This object can not be written in case of 
                 rs232 interface identified by ifType
                 value rs232(33)."

VARIATION        ifOperStatus
SYNTAX           INTEGER { up(1), down(2), testing(3) }
DESCRIPTION      "Unable to detect all states."

VARIATION        ifLastChange
DESCRIPTION      "The value does not reflect the change in
                 the operational status of the interface.
                 The value zero is returned."
 
VARIATION        ifInOctets
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifInUcastPkts
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifInDiscards
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifInErrors
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifInUnknownProtos
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifOutOctets
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifOutUcastPkts
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifOutDiscards
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifOutErrors
DESCRIPTION      "Supported only for following interfaces:
                 Ethernet interface (ifType = ethernetCsmacd(6))
                 Loopback interfce  (ifType = softwareLoopback(24))
                 SLIP Interface (ifType = slip(28))."

VARIATION        ifInMulticastPkts
ACCESS           not-implemented 
DESCRIPTION      "Not supported."

VARIATION        ifInBroadcastPkts
ACCESS           not-implemented 
DESCRIPTION      "Not supported."
 
VARIATION        ifOutMulticastPkts
ACCESS           not-implemented 
DESCRIPTION      "Not supported."

VARIATION        ifOutBroadcastPkts
ACCESS           not-implemented 
DESCRIPTION      "Not supported."

VARIATION        ifLinkUpDownTrapEnable
ACCESS           read-only
DEFVAL           { disabled }
DESCRIPTION      "Write operation not supported."

VARIATION        ifPromiscuousMode
ACCESS           read-only
DEFVAL           { false }
DESCRIPTION      "Write operation not supported."

VARIATION        ifAlias
ACCESS           not-implemented
DESCRIPTION      "Not supported."

::= { ciscoIfCapability 4 }

ciscoIfCapabilityAxsmVR200 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 2.00."
STATUS          current
DESCRIPTION     "IF MIB capabilities for ATM Switch Service
                Module(AXSM)."

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup }

VARIATION       ifNumber
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifPhysAddress
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
SYNTAX          INTEGER { up(1), down(2) }
DESCRIPTION     "This object can not be written in case of 
                atm interface identified by ifType value atm(37).
                Does not support testing(3)."

VARIATION       ifOperStatus
SYNTAX          INTEGER { up(1), down(2), notPresent(6) }
DESCRIPTION     "Unable to detect all states.
                Does not support testing(3),unknown(4),
                dormant(5),lowerLayerDown(7)."

VARIATION       ifLastChange
DESCRIPTION     "The value does not reflect the change in
                the operational status of the interface.
                The value zero is returned."
 
VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-only
DEFVAL          { disabled }
DESCRIPTION     "Write operation not supported."

VARIATION       ifAlias
ACCESS          not-implemented
DESCRIPTION     "Not supported."

::= { ciscoIfCapability 5 } 
 
ciscoIfCapabilityAxsmeV21R60 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 2.1.60"
STATUS          current
DESCRIPTION     "IF MIB capabilities for Enhanced ATM 
                Switch Service Module (AXSM-E)."

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup }

VARIATION       ifNumber
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifPhysAddress
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
SYNTAX          INTEGER { up(1), down(2) }
DESCRIPTION     "Does not support testing(3)."

VARIATION       ifOperStatus
SYNTAX          INTEGER { 
                    up(1), 
                    down(2),
                    notPresent(6),
                    lowerLayerDown(7) 
                }
DESCRIPTION     "Unable to detect all states.
                Does not support testing(3), 
                unknown(4), dormant(5)."

VARIATION       ifLastChange
DESCRIPTION     "The value does not reflect the change in
                the operational status of the interface.
                The value zero is returned."
 
VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-only
DEFVAL          { disabled }
DESCRIPTION     "Write operation not supported."

VARIATION       ifAlias
ACCESS          not-implemented
DESCRIPTION     "Not supported."

::= { ciscoIfCapability 6 } 

ciscoIfCapabilityFrsm12V3R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 3.0.00"
STATUS          current
DESCRIPTION     "IF MIB capabilities for 
                Frame Relay Service Module(FRSM-12)."

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup }

VARIATION       ifNumber
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifPhysAddress
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
SYNTAX          INTEGER { up(1), down(2) }
DESCRIPTION     "Does not support testing(3)."

VARIATION       ifOperStatus
SYNTAX          INTEGER { 
                    up(1), 
                    down(2),
                    notPresent(6),
                    lowerLayerDown(7) 
                }
DESCRIPTION     "Unable to detect all states.
                Does not support testing(3), 
                unknown(4), dormant(5)."

VARIATION       ifLastChange
DESCRIPTION     "The value does not reflect the change in
                the operational status of the interface.
                The value zero is returned."
 
VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-only
DEFVAL          { disabled }
DESCRIPTION     "Write operation not supported."

VARIATION       ifAlias
ACCESS          not-implemented
DESCRIPTION     "Not supported."

    ::= { ciscoIfCapability 7 } 


ciscoIfCapabilityV4R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8950, MGX8850 Release 4.0.00"
STATUS          current
DESCRIPTION     "IF MIB capabilities for 10 Gig. ATM 
                Switch Service Module (AXSM-XG) and 
                Enhanced ATM Switch Service Module 
                (AXSM-E)."

SUPPORTS        IF-MIB
INCLUDES        { ifGeneralInformationGroup }

--
-- Variations applicable for AXSM-E
--
VARIATION       ifOperStatus
SYNTAX          INTEGER { 
                    up(1), 
                    down(2),
                    testing(3),
                    notPresent(6),
                    lowerLayerDown(7) 
                }
DESCRIPTION     "Only subset of values supported.
                Following values not supported:
                unknown(4), dormant(5)."

--
-- Variations applicable for AXSM-XG
--
VARIATION       ifOperStatus
SYNTAX          INTEGER { 
                    up(1), 
                    down(2),
                    notPresent(6),
                    lowerLayerDown(7) 
                }
DESCRIPTION     "Only subset of values supported.
                Following values not supported:
                testing(3), unknown(4), dormant(5)."

--
-- Variations applicable for AXSM-E, AXSM-XG.
--

VARIATION       ifNumber
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifTableLastChange
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifPhysAddress
ACCESS          not-implemented
DESCRIPTION     "Not supported."

VARIATION       ifAdminStatus
SYNTAX          INTEGER { up(1), down(2) }
DESCRIPTION     "Does not support testing(3)."

VARIATION       ifLastChange
DESCRIPTION     "The value does not reflect the change in
                the operational status of the interface.
                The value zero is returned."
 
VARIATION       ifLinkUpDownTrapEnable
ACCESS          read-only
DEFVAL          { disabled }
DESCRIPTION     "Write operation not supported."

VARIATION       ifAlias
ACCESS          not-implemented
DESCRIPTION     "Not supported."

::= { ciscoIfCapability 8 } 

ciscoIfCapabilityV5R00 AGENT-CAPABILITIES

    PRODUCT-RELEASE "MGX8850 Release 5.0.0"
    STATUS          current
    DESCRIPTION     "IF MIB capabilities for Voice Switch 
                     Service Module (VXSM) and MPSM in 
                     release 5.0.0"

    SUPPORTS        IF-MIB
    INCLUDES        { ifGeneralInformationGroup }

    VARIATION       ifTableLastChange
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    VARIATION       ifPhysAddress
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    VARIATION       ifNumber
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    VARIATION       ifAdminStatus
    SYNTAX          INTEGER { up(1), down(2) }
    DESCRIPTION     "For ifType propAtm (197), only up(1) is supported.
                     This object is not supported if the 
                     ifType is sonetVT(51)."

--
-- VXSM VARIATION
--
    VARIATION       ifOperStatus
    SYNTAX          INTEGER { up   (1), 
                              down (2)
                    }
    DESCRIPTION     "For ifType propAtm (197), not all states 
                     can be detected.
                     This object is not supported if the ifType
                     is sonetVT(51) or propAtm (197)."

--
-- MPSM VARIATION
--
    VARIATION       ifOperStatus
    SYNTAX          INTEGER { up   (1), 
                              down (2),
                              testing(3),
                              notPresent(6),
                              lowerLayerDown(7) 
                    }
    DESCRIPTION     "For ifType propAtm (197), not all states 
                     can be detected.
                     For ifType sonetVT(51) only up(1), down(2) and 
                     lowerLayerDown(7) are detected."

--
-- VXSM VARIATION
--
    VARIATION       ifLastChange
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

--
-- MPSM VARIATION
--
    VARIATION       ifLastChange
    DESCRIPTION     "The value does not reflect the change in
                    the operational status of the interface.
                    The value zero is returned."

    VARIATION       ifLinkUpDownTrapEnable
    ACCESS          read-only
    DEFVAL          { disabled }
    DESCRIPTION     "Write operation not supported."

    ::= { ciscoIfCapability 9 } 

END