You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-IP-IF-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-IP-IF-CAPABILITY by vendor Cisco

CISCO-IP-IF-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-IP-IF-CAPABILITY.


Vendor: Cisco
Mib: CISCO-IP-IF-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-IP-IF-CAPABILITY.my:
-- Cisco CISCO-IP-IF-MIB AGENT-CAPABILITIES
--
-- Aug 2003, Jayakumar Kadirvelu
--
-- Copyright (c) 2003-2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-IP-IF-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        Integer32
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoIPIfCapability MODULE-IDENTITY
        LAST-UPDATED    "200404190000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of CISCO-IP-IF-MIB."

        REVISION        "200404190000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 324 }

ciscoIpIfCapCatOSV08R0101 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1)."
    STATUS              current
    DESCRIPTION         "CISCO-IP-IF-MIB capabilities."

    SUPPORTS            CISCO-IP-IF-MIB
        INCLUDES        { ciscoIPIfAddressConfigurationGroup1,
                          ciscoIPIfAddressConfigurationGroup2,
                          ciscoIPIfAddressConfigurationGroup3,
                          ciscoIPIfAddressConfigurationGroup4 
                        }
        VARIATION       ciiIPAddressCategoryCap
        SYNTAX          BITS { single(0) }
        DESCRIPTION     "Only limited set of enumerated values
                         are supported."

        VARIATION       ciiIPAddressType
        SYNTAX          INTEGER {ipv4(1)}
        DESCRIPTION     "Only limited set of enumerated values
                         are supported."

        VARIATION       ciiIPAddressIfIndex
        SYNTAX          Integer32 (1 | 3)
        DESCRIPTION     "Only InterfaceIndex 1 and 3 which correspond
                         to kernel interfaces are supported."

        VARIATION       ciiIPAddressCategory
        SYNTAX          INTEGER {single(1)}
        DESCRIPTION     "Only limited set of enumerated values
                         are supported."

        VARIATION       ciiIPAddressStatus
        SYNTAX          INTEGER { active(1),
                                  creatAndGo(4),
                                  destroy(6)
                                }
        DESCRIPTION     "Only limited set of enumerated values 
                         are supported." 

        VARIATION       ciiIPIfAddressCategory
        SYNTAX          INTEGER {single(1)}
        DESCRIPTION     "Only limited set of enumerated values
                         are supported."

        VARIATION       ciiIPIfAddressStatus
        SYNTAX          INTEGER { active(1),
                                  creatAndGo(4),
                                  destroy(6)
                                }
        DESCRIPTION     "Only limited set of enumerated values 
                         are supported." 

    ::= { ciscoIPIfCapability 1 }

END