You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-IPSEC-SIGNALING-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-IPSEC-SIGNALING-MIB by vendor Cisco

CISCO-IPSEC-SIGNALING-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-IPSEC-SIGNALING-MIB.


Vendor: Cisco
Mib: CISCO-IPSEC-SIGNALING-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *------------------------------------------------------------------
-- * CISCO-IPSEC-SIGNALING-MIB.my:
-- *                   Generic IPsec/FC-SP Signaling MIB
-- *
-- * Apr 2004, S Ramakrishnan
-- *
-- * Copyright (c) 2004 by cisco Systems, Inc.
-- * All rights reserved.
-- *------------------------------------------------------------------

  CISCO-IPSEC-SIGNALING-MIB DEFINITIONS ::= BEGIN

    IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, 
      NOTIFICATION-TYPE,
      Counter32, 
      Counter64, 
      Gauge32, 
      Unsigned32                             FROM SNMPv2-SMI
      TimeStamp, 
      TimeInterval,
      TruthValue                             FROM SNMPv2-TC
      MODULE-COMPLIANCE, OBJECT-GROUP, 
      NOTIFICATION-GROUP                     FROM SNMPv2-CONF
      SnmpAdminString                        FROM SNMP-FRAMEWORK-MIB
      CIPsecControlProtocol,
      CIPsecEncryptionKeySize,
      CIPsecPhase1PeerIdentityType,
      CIPsecIkeHashAlgorithm,
      CIPsecIkeAuthMethod,
      CIPsecEncryptAlgorithm,
      CIPsecPhase1TunnelIndex,
      CIPsecTunnelStatus                     FROM CISCO-IPSEC-TC
      ciscoMgmt                              FROM CISCO-SMI;

    ciscoIPsecSignalingMIB MODULE-IDENTITY
         LAST-UPDATED "200409220000Z"
         ORGANIZATION "Cisco Systems"
         CONTACT-INFO
         "
          Cisco Systems
          Customer Service

          Postal: 170 W Tasman Drive
                  San Jose, CA  95134
                  USA

             Tel: +1 800 553-NETS
          E-mail: cs-ipsecmib@external.cisco.com
         "

    DESCRIPTION
    "
    This MIB Module models status, performance and failures
    of a protocol with the generic characteristics of signalling 
    protocols used with IPsec and FC-SP protocols. Examples
    of such protocols include IKE, KINK, etc. This MIB views the
    common attributes of such protocols. Signaling protocols are
    also referred in this document as 'Control Protocols', since 
    they perform session control.

    This MIB is an attempt to capture the generic aspects 
    of the signaling activity. The protocol-specific aspects
    of a signaling protocol still need to be captured 
    in a protocol-specific MIB (e.g., CISCO-IKE-FLOW-MIB, etc.).

    Acronyms
    The following acronyms are used in this document:

       IPsec:      Secure IP Protocol

       VPN:        Virtual Private Network

       ISAKMP:     Internet Security Association and Key Exchange
                   Protocol

       IKE:        Internet Key Exchange Protocol

       SA:         Security Association 
               (ref: rfc2408).

       Phase 1 Tunnel:
                   An ISAKMP SA can be regarded as representing
                   a flow of ISAKMP/IKE traffic. Hence an ISAKMP
                   is referred to as a 'Phase 1 Tunnel' in this
                   document. 

       Control Tunnel:
                   Another term for a Phase 1 Tunnel.

       Phase 2 Tunnel:
                   An instance of a non-ISAKMP SA  bundle in which all
                   the SA share the same proxy identifiers (IDii,IDir)
                   protect the same stream of application traffic.
                   Such an SA bundle is termed a 'Phase 2 Tunnel'.
                   Note that a Phase 2 tunnel may comprise different
                   SA bundles and different number of SA bundles at
                   different times (due to key refresh).


    History of the MIB
     A precursor to this MIB was the IPsec Flow Monitor MIB, which
     combined the objects pertaining to IKE and IPsec (Phase-2)
     into a single MIB module. Furthermore, the MIB supported only
     one signaling protocol, IKEv1, in addition to manual keying.

     The MIB was written by Tivoli and implemented in IBM Nways 
     routers in 1999. During late 1999, Cisco adopted the MIB and 
     together with Tivoli publised the IPsec Flow Monitor MIB in 
     IETF IPsec WG in draft-ietf-ipsec-flow-monitoring-mib-00.txt. 
     In 2000, the MIB was Cisco-ized and implemented as
     CISCO-IPSEC-FLOW-MONITOR-MIB in IOS and VPN3000 platforms.

     With the evolution of IKEv2, the MIB was modified and 
     presented to the IPsec WG again in May 2003 in
     draft-ietf-ipsec-flow-monitoring-mib-02.txt.

     With the emergence to multiple signaling protocols, it has
     further evolved to define separate set of MIB modules to 
     instrument IPsec signaling alone. Thus, this MIB module
     is now the generic IPsec signaling MIB.
      
    Overview of MIB
     The MIB contains major groups of objects which are
     used to manage the generic aspects of IPsec signaling. 
     These groups include a global statistics, control tunnel table,
     Peer association group, control tunnel history group,
     signaling failure group and notification group.

     The global statistics, tunnel table and peer association
     groups aid in the real-time monitoring of IPsec signaling
     activity.

     The History group is to aid applications that do
     trending analysis.

     The Failure group is to enable an operator to
     do troubleshooting and debugging.
     Further, counters are supported to aid detection
     of potential security violations.

     The notifications are modeled as generic IPsec control 
     notifications and are parameterized by the identity of the
     specific signaling protocol which caused the notification
     to be issued.
    " 

    REVISION    "200409220000Z"
    DESCRIPTION
    "
    Initial version of the MIB.
    "
         ::= { ciscoMgmt 438 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- IPsec Signaling MIB Object Groups
   --
   -- This MIB module contains the following groups:
   -- 1) Global Statistics
   -- 2) Signaling tunnel table
   -- 3) IPsec Signaling History Group
   -- 4) IPsec Signaling Failure Group
   -- 5) IPsec Signaling Notification Control Group
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      ciscoIPsecSigMIBNotifs OBJECT IDENTIFIER  
                     ::= { ciscoIPsecSignalingMIB 0 }

      ciscoIPsecSigMIBObjects OBJECT IDENTIFIER  
                     ::= { ciscoIPsecSignalingMIB 1 }

      ciscoIPsecSigMIBConform OBJECT IDENTIFIER  
                     ::= { ciscoIPsecSignalingMIB 2 }

      cisgIpsSgCurrentActivity  OBJECT IDENTIFIER
                     ::= { ciscoIPsecSigMIBObjects 1 }

      cisgIpsSgPeerAssociations OBJECT IDENTIFIER
                     ::= { ciscoIPsecSigMIBObjects 2 }

      cisgIpsSgHistory OBJECT IDENTIFIER
                     ::= { ciscoIPsecSigMIBObjects 3 }

      cisgIpsSgFailures OBJECT IDENTIFIER
                     ::= { ciscoIPsecSigMIBObjects 4 }

      cisgIpsSgNotificationCntl OBJECT IDENTIFIER
                     ::= { ciscoIPsecSigMIBObjects 5 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The IPsec Phase-1 Global Statistics
   -- There is one row in the following table for each
   -- control protocol implemented by the managed entity.
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   cisgIpsSgGlobalStatsTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CisgIpsSgGlobalStatsEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "
      This Signaling Protocol global statistics table.
      There is one row in the following table for each
      signaling protocol implemented by the managed entity.

      There is no row corresponding to the instance
      'cpNone'.

      If the managed entity implements more than one
      signaling protocol, the aggregate statistics
      across all the supported signaling protocols 
      must be computed by the network management station 
      manually; in other words, there is no conceptual row
      in this table corresponding to 'all signaling protocols'.
      "
     ::= { cisgIpsSgCurrentActivity 1 }

   cisgIpsSgGlobalStatsEntry OBJECT-TYPE
      SYNTAX CisgIpsSgGlobalStatsEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "
      Each entry contains the global statistics pertaining
      to a specific signaling protocol.
      "
      INDEX { cisgIpsSgProtocol }
      ::= { cisgIpsSgGlobalStatsTable 1}

   CisgIpsSgGlobalStatsEntry ::= SEQUENCE {
      cisgIpsSgProtocol              CIPsecControlProtocol,
      cisgIpsSgGlobalActiveTunnels   Gauge32,
      cisgIpsSgGlobalPreviousTunnels Counter64,
      cisgIpsSgGlobalInOctets        Counter64,
      cisgIpsSgGlobalInPkts          Counter64,
      cisgIpsSgGlobalInDropPkts      Counter64,
      cisgIpsSgGlobalInNotifys       Counter64,
      cisgIpsSgGlobalInP2SaDelReqs   Counter64,
      cisgIpsSgGlobalOutOctets       Counter64,
      cisgIpsSgGlobalOutPkts         Counter64,
      cisgIpsSgGlobalOutDropPkts     Counter64,
      cisgIpsSgGlobalOutNotifys      Counter64,
      cisgIpsSgGlobalOutP2SaDelReqs  Counter64,
      cisgIpsSgGlobalInitTunnels     Counter64,
      cisgIpsSgGlobalInitTunnelFails Counter64,
      cisgIpsSgGlobalRespTunnels     Counter64,
      cisgIpsSgGlobalRespTunnelFails Counter64,
      cisgIpsSgGlobalSysCapFails     Counter64,
      cisgIpsSgGlobalAuthFails       Counter64,
      cisgIpsSgGlobalDecryptFails    Counter64,
      cisgIpsSgGlobalHashValidFails  Counter64,
      cisgIpsSgGlobalBadTunnelRefs   Counter64,
      cisgIpsSgGlobalInP1SaDelReqs   Counter64,
      cisgIpsSgGlobalOutP1SaDelReqs  Counter64
   }

   cisgIpsSgProtocol OBJECT-TYPE
      SYNTAX CIPsecControlProtocol
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "
      The identity of the signaling protocol used by the
      control tunnel corresponding to this conceptual row.
      "
      ::= { cisgIpsSgGlobalStatsEntry 1 }

   cisgIpsSgGlobalActiveTunnels OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The number of currently active Phase-1 
       control tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 2 }

   cisgIpsSgGlobalPreviousTunnels OBJECT-TYPE
      SYNTAX Counter64
      UNITS "SAs"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       High capacity counter to accumulate the
       total number of Phase-1 control tunnels that 
       are no longer active.
       "
      ::= { cisgIpsSgGlobalStatsEntry 3 }

   cisgIpsSgGlobalInOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of octets received by all 
       currently and previously active Phase-1 
       Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 4 }

   cisgIpsSgGlobalInPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets received by all currently
       and previously active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 5 }

   cisgIpsSgGlobalInDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets which were dropped 
       during receive processing by all currently and 
       previously active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 6 }

   cisgIpsSgGlobalInNotifys OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       " 
       The total number of notification payloads received by all
       currently and previously active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 7 }

   cisgIpsSgGlobalInP2SaDelReqs OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       " 
       The total number of Phase-2 security association delete
       requests received by all currently and previously
       active and Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 8 }

   cisgIpsSgGlobalOutOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of octets sent by all currently
       and previously active and Phase-1 Control
       Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 9 }

   cisgIpsSgGlobalOutPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets sent by all currently
       and previously active and Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 10 }

   cisgIpsSgGlobalOutDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets which were dropped 
       during send processing by all currently and previously
       active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 11 }

   cisgIpsSgGlobalOutNotifys OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of notification payloads sent by all 
       currently and previously active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 12 }

   cisgIpsSgGlobalOutP2SaDelReqs OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-2 tunnel delete requests
       sent by all currently and previously active Phase-1 
       Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 13 }

   cisgIpsSgGlobalInitTunnels OBJECT-TYPE
      SYNTAX Counter64
      UNITS "SAs"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-1 currently and previously active
       Control Tunnels which were locally initiated.
       "
      ::= { cisgIpsSgGlobalStatsEntry 14 }

   cisgIpsSgGlobalInitTunnelFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "SAs"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-1 currently and previously active
       Control Tunnels which were locally initiated and 
       failed to activate.
       "
      ::= { cisgIpsSgGlobalStatsEntry 15 }

   cisgIpsSgGlobalRespTunnels OBJECT-TYPE
      SYNTAX Counter64
      UNITS "SAs"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-1 currently and previously active
       Control Tunnels which were remotely initiated.
       "
      ::= { cisgIpsSgGlobalStatsEntry 16 }

   cisgIpsSgGlobalRespTunnelFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "SAs"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       " 
       The total number of Phase-1 currently and previously active
       Control Tunnels which were remotely initiated and failed
       to activate.
       "
      ::= { cisgIpsSgGlobalStatsEntry 17 }

   cisgIpsSgGlobalSysCapFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Failures"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of system capacity failures 
       which occurred during processing of all current 
       and previously active Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 18 }

   cisgIpsSgGlobalAuthFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Failures"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of authentications which ended
       in failure by all current and previous Phase-1
       Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 19 }

   cisgIpsSgGlobalDecryptFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Failures"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of decryption operations in all current
       and previous Phase-1 Control Tunnels which failed to yield
       the original payload.
       "
      ::= { cisgIpsSgGlobalStatsEntry 20 }

   cisgIpsSgGlobalHashValidFails OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Failures"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of hash validation operations in all 
       current and previous Phase-1 Control Tunnels which resulted
       in failure.
       "
      ::= { cisgIpsSgGlobalStatsEntry 21 }

   cisgIpsSgGlobalBadTunnelRefs OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Failures"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of incoming packets that refer to 
       non-existent Phase-1 control tunnels which occurred during
       processing of all current and previous Phase-1 Control
       Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 22 }

   cisgIpsSgGlobalInP1SaDelReqs OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-1 security association
       delete requests received by all currently and
       previously active and Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 23 }

   cisgIpsSgGlobalOutP1SaDelReqs OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-1 security association
       delete requests sent by all currently and
       previously active and Phase-1 Control Tunnels.
       "
      ::= { cisgIpsSgGlobalStatsEntry 24 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Phase-1 Control Tunnel Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   cisgIpsSgTunnelTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CisgIpsSgTunnelEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "
      This table lists active Phase-1 control tunnels.
      There is one entry in this table for each 
      active Control Tunnel.
      "
     ::= { cisgIpsSgCurrentActivity 2 }

   cisgIpsSgTunnelEntry OBJECT-TYPE
      SYNTAX CisgIpsSgTunnelEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "
      Each entry contains the attributes associated with
      an active Phase-1 control Tunnel.
      "
      INDEX { cisgIpsSgProtocol, cisgIpsSgTunIndex }
      ::= { cisgIpsSgTunnelTable 1}

   CisgIpsSgTunnelEntry ::= SEQUENCE {
      cisgIpsSgTunIndex             CIPsecPhase1TunnelIndex,
      cisgIpsSgTunLocalType         CIPsecPhase1PeerIdentityType,
      cisgIpsSgTunLocalValue        SnmpAdminString,
      cisgIpsSgTunLocalAddressType  CIPsecPhase1PeerIdentityType,
      cisgIpsSgTunLocalAddress      SnmpAdminString,
      cisgIpsSgTunLocalName         SnmpAdminString,
      cisgIpsSgTunRemoteType        CIPsecPhase1PeerIdentityType,
      cisgIpsSgTunRemoteValue       SnmpAdminString,
      cisgIpsSgTunRemoteAddressType CIPsecPhase1PeerIdentityType,
      cisgIpsSgTunRemoteAddress     SnmpAdminString,
      cisgIpsSgTunRemoteName        SnmpAdminString,
      cisgIpsSgTunEncryptAlgo       CIPsecEncryptAlgorithm,
      cisgIpsSgTunEncryptKeySize    CIPsecEncryptionKeySize,
      cisgIpsSgTunHashAlgo          CIPsecIkeHashAlgorithm,
      cisgIpsSgTunAuthMethod        CIPsecIkeAuthMethod,
      cisgIpsSgTunLifeTime          Unsigned32,
      cisgIpsSgTunActiveTime        TimeInterval,
      cisgIpsSgTunInOctets          Counter32,
      cisgIpsSgTunInPkts            Counter32,
      cisgIpsSgTunInDropPkts        Counter32,
      cisgIpsSgTunInNotifys         Counter32,
      cisgIpsSgTunOutOctets         Counter32,
      cisgIpsSgTunOutPkts           Counter32,
      cisgIpsSgTunOutDropPkts       Counter32,
      cisgIpsSgTunOutNotifys        Counter32,
      cisgIpsSgTunOutP2SaDelReqs    Counter32,
      cisgIpsSgTunStatus            CIPsecTunnelStatus,
      cisgIpsSgTunAction            INTEGER
   }

   cisgIpsSgTunIndex OBJECT-TYPE
      SYNTAX CIPsecPhase1TunnelIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
       "
       The index of the Phase-1 Tunnel Table.
       The value of the index is a number which begins 
       at 1 and is incremented with each tunnel that is
       created. The value of this object will wrap at 
       4,294,967,296.
       "
      ::= { cisgIpsSgTunnelEntry 1 }

   cisgIpsSgTunLocalType OBJECT-TYPE
      SYNTAX CIPsecPhase1PeerIdentityType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The type of the identity used by the managed entity 
       authenticating itself to the peer in the setup of the 
       tunnel corresponding to this conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 2 }

   cisgIpsSgTunLocalValue OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(1..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The value of the local peer identity. 
       "
      ::= { cisgIpsSgTunnelEntry 3 }

   cisgIpsSgTunLocalAddressType OBJECT-TYPE
      SYNTAX CIPsecPhase1PeerIdentityType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The type of the address of the local endpoint of
       the Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 4 }

   cisgIpsSgTunLocalAddress OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(0..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The address of the local endpoint for 
       the Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 5 }


   cisgIpsSgTunLocalName OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(0..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The DNS name of the local IP address for the Phase-1
       Tunnel. If the DNS name associated with the local tunnel 
       endpoint is not known, then the value of this
       object will be a zero-length string.
       "
      ::= { cisgIpsSgTunnelEntry 6 }

   cisgIpsSgTunRemoteType OBJECT-TYPE
      SYNTAX CIPsecPhase1PeerIdentityType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The type of the identity used by the remote peer in
       authenticating itself to the local peer in the
       setup of the tunnel corresponding to this
       conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 7 }

   cisgIpsSgTunRemoteValue OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(1..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The value of the remote peer identity.
       "
      ::= { cisgIpsSgTunnelEntry 8 }

   cisgIpsSgTunRemoteAddressType OBJECT-TYPE
      SYNTAX CIPsecPhase1PeerIdentityType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The type of the address of the remote endpoint for 
       the Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 9 }

   cisgIpsSgTunRemoteAddress OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(0..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The address of the remote endpoint of the
       Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 10 }

   cisgIpsSgTunRemoteName OBJECT-TYPE
      SYNTAX SnmpAdminString(SIZE(0..255))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The DNS name of the remote address of Phase-1
       Tunnel. If the DNS name associated with the remote
       tunnel endpoint is not known, then the value of this
       object will be a zero-length string.
       "
      ::= { cisgIpsSgTunnelEntry 11 }

   cisgIpsSgTunEncryptAlgo OBJECT-TYPE
      SYNTAX CIPsecEncryptAlgorithm
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The encryption algorithm used in Phase-1 negotiations on the
       control tunnel corresponding to this conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 12 }

   cisgIpsSgTunEncryptKeySize        OBJECT-TYPE
      SYNTAX CIPsecEncryptionKeySize
      UNITS "Bits"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The size in bits of the key used for encrypting
       payloads by the tunnel corresponding to this
       conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 13 }

   cisgIpsSgTunHashAlgo OBJECT-TYPE
      SYNTAX CIPsecIkeHashAlgorithm
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The hash algorithm used in Phase-1 negotiations on the
       control tunnel corresponding to this conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 14 }

   cisgIpsSgTunAuthMethod OBJECT-TYPE
      SYNTAX CIPsecIkeAuthMethod
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The authentication method used in Phase-1 negotiations 
       on the control tunnel corresponding to this conceptual row.
       "
      ::= { cisgIpsSgTunnelEntry 15 }

   cisgIpsSgTunLifeTime OBJECT-TYPE
      SYNTAX Unsigned32 (1..2147483647)
      UNITS "seconds"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The negotiated LifeTime of the Phase-1 Tunnel in seconds.
       "
      ::= { cisgIpsSgTunnelEntry 16 }

   cisgIpsSgTunActiveTime OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The length of time the Phase-1 tunnel has been
       active in hundredths of seconds.
       "
      ::= { cisgIpsSgTunnelEntry 17 }

   cisgIpsSgTunInOctets OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of octets received by this Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 18 }

   cisgIpsSgTunInPkts OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets received by this Phase-1
       Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 19 }

   cisgIpsSgTunInDropPkts OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets dropped by this Phase-1 
       Tunnel during receive processing.
       "
      ::= { cisgIpsSgTunnelEntry 20 }

   cisgIpsSgTunInNotifys OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of notification payloads received by 
       this Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 21 }

   cisgIpsSgTunOutOctets OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of octets sent by this Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 22 }

   cisgIpsSgTunOutPkts OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets sent by this Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 23 }

   cisgIpsSgTunOutDropPkts OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of packets dropped by this Phase-1 Tunnel
       during send processing.
       "
      ::= { cisgIpsSgTunnelEntry 24 }

   cisgIpsSgTunOutNotifys OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of notification payloads sent by this 
       Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 25 }

   cisgIpsSgTunOutP2SaDelReqs OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Notification Payloads"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The total number of Phase-2 security association
       delete requests sent by this Phase-1 Tunnel.
       "
      ::= { cisgIpsSgTunnelEntry 26 }

   cisgIpsSgTunStatus OBJECT-TYPE
      SYNTAX CIPsecTunnelStatus                          
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
       "
       The status of the MIB table row.
       "
      ::= { cisgIpsSgTunnelEntry 27 }
      
   cisgIpsSgTunAction OBJECT-TYPE
       SYNTAX      INTEGER {
                              none(1),
                              clear(2),
                              rekey(3)
                           }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The action to be taken on this tunnel.
           If 'clear', then this tunnel is cleared.
           If 'rekey', then rekeying is forced on this tunnel.
           The value 'none' would be returned on doing read of this 
           object. "
       ::= { cisgIpsSgTunnelEntry 28 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Control Tunnel History Group
   --
   -- This group consists of:
   -- 1) Control History Global Objects
   -- 2) Control Tunnel History Objects
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgHistGlobal  OBJECT IDENTIFIER
                       ::= { cisgIpsSgHistory 1 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Control History Global Objects
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgHistGlobalCntl OBJECT IDENTIFIER
                       ::= { cisgIpsSgHistGlobal 1 }

      cisgIpsSgHistTableSize  OBJECT-TYPE
         SYNTAX Unsigned32 (0..2147483647)
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          The window size of the control tunnel
          History Tables.

          The control tunnel history table is implemented as 
          a sliding window in which at most the last 
          'cisgIpsSgHistTableSize' entries are maintained. 
          This object is, hence, used to control the size of 
          the tunnel history table.

          An implementation may choose suitable values for this
          element based on the available resources. 
          If an SNMP SET request specifies a value outside this
          window for this element, in appropriate SNMP error 
          code should be returned.

          Setting this value to zero is equivalent to deleting
          all conceptual rows in the archiving table
          ('cisgIpsSgTunnelHistTable') and disabling the 
          archiving of entries in the tables.
          "
         ::= { cisgIpsSgHistGlobalCntl 1 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The IKE Tunnel History Table
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgTunnelHistTable OBJECT-TYPE
         SYNTAX SEQUENCE OF CisgIpsSgTunnelHistEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          The control tunnel History Table. This table
          lists all instances of control tunnels that were
          successfully established but which are no longer in
          operation. An entry transitions to this table from
          the active tunnel table ('cisgIpsSgTunnelTable') into 
          this table after it expires, is aborted or terminated.

          This table is conceptually a sliding window in 
          which only the last 'N' entries are maintained,
          where 'N' is the value of the object 
          'cisgIpsSgHistTableSize'.

          If the value of 'cisgIpsSgHistTableSize' is 0,
          archiving of entries in this table is disabled.
          "
        ::= { cisgIpsSgHistory 2 }

      cisgIpsSgTunnelHistEntry OBJECT-TYPE
         SYNTAX CisgIpsSgTunnelHistEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          Each entry contains the attributes associated with
          a previously active control Tunnel.
          "
         INDEX { 
                cisgIpsSgProtocol,
                cisgIpsSgTunHistIndex 
               }
         ::= { cisgIpsSgTunnelHistTable 1 }

      CisgIpsSgTunnelHistEntry ::= SEQUENCE {
       cisgIpsSgTunHistIndex          Unsigned32,
       cisgIpsSgTunHistTermReason     INTEGER,
       cisgIpsSgTunHistActiveIndex    CIPsecPhase1TunnelIndex,
       cisgIpsSgTunHistPeerLocalType  CIPsecPhase1PeerIdentityType,
       cisgIpsSgTunHistPeerLocalValue SnmpAdminString,
       cisgIpsSgTunHistPeerIntIndex   Unsigned32,
       cisgIpsSgTunHistPeerRemoteType CIPsecPhase1PeerIdentityType,
       cisgIpsSgTunHistPeerRemoteValue SnmpAdminString,
       cisgIpsSgTunHistLocalAddrType  CIPsecPhase1PeerIdentityType,
       cisgIpsSgTunHistLocalAddr      SnmpAdminString,
       cisgIpsSgTunHistLocalName      SnmpAdminString,
       cisgIpsSgTunHistRemoteAddrType CIPsecPhase1PeerIdentityType,
       cisgIpsSgTunHistRemoteAddr     SnmpAdminString,
       cisgIpsSgTunHistRemoteName     SnmpAdminString,
       cisgIpsSgTunHistEncryptAlgo    CIPsecEncryptAlgorithm,
       cisgIpsSgTunHistEncryptKeySize CIPsecEncryptionKeySize,
       cisgIpsSgTunHistHashAlgo       CIPsecIkeHashAlgorithm,
       cisgIpsSgTunHistAuthMethod     CIPsecIkeAuthMethod,
       cisgIpsSgTunHistLifeTime       Unsigned32,
       cisgIpsSgTunHistStartTime      TimeStamp,
       cisgIpsSgTunHistActiveTime     TimeInterval,
       cisgIpsSgTunHistInOctets       Counter64,
       cisgIpsSgTunHistInPkts         Counter64,
       cisgIpsSgTunHistInDropPkts     Counter64,
       cisgIpsSgTunHistInNotifys      Counter64,
       cisgIpsSgTunHistInP2SaDelReqs  Counter64,
       cisgIpsSgTunHistOutOctets      Counter64,
       cisgIpsSgTunHistOutPkts        Counter64,
       cisgIpsSgTunHistOutDropPkts    Counter64,
       cisgIpsSgTunHistOutNotifys     Counter64,
       cisgIpsSgTunHistOutP2SaDelReqs Counter64
      }

      cisgIpsSgTunHistIndex OBJECT-TYPE
         SYNTAX Unsigned32 
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          The index of the Phase-1 Control Tunnel History
          Table. This object has no relationship to the
          cisgIpsSgTunIndex of the tunnel when it was active.
          The value of the index is a number which
          begins at one and is incremented with each
          tunnel that ends. The value of this object
          will wrap at 4,294,967,296.
          "
         ::= { cisgIpsSgTunnelHistEntry 1 }

      cisgIpsSgTunHistTermReason  OBJECT-TYPE
         SYNTAX INTEGER {
                   other(1),
                   normal(2),
                   operRequest(3),
                   peerDelRequest(4),
                   peerLost(5),
                   applicationInitiated(6),
                   userAuthFailure(7),
                   localFailure(8)
                }
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The reason the Phase-1 Control Tunnel was terminated.
          Possible reasons include:
          1 = other
          2 = normal termination
          3 = operator request
          4 = peer delete request was received
          5 = contact with peer was lost
          6 = applicationInitiated (eg: L2TP requesting 
                    the termination)
          7 = failure of extended user authentication
          8 = local failure occurred.
          "
         ::= { cisgIpsSgTunnelHistEntry 2 }

      cisgIpsSgTunHistActiveIndex OBJECT-TYPE
         SYNTAX CIPsecPhase1TunnelIndex
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The index of the previously active 
          Control Tunnel. This object must correspond
          to an expired IKE tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 3 }

      cisgIpsSgTunHistPeerLocalType OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of local peer identity.
          "
         ::= { cisgIpsSgTunnelHistEntry 4 }

      cisgIpsSgTunHistPeerLocalValue OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of the local peer identity.
          "
         ::= { cisgIpsSgTunnelHistEntry 5 }

      cisgIpsSgTunHistPeerIntIndex OBJECT-TYPE
         SYNTAX Unsigned32 (1..2147483647)
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The arbitrary index to keep local-remote peer
          association.  This index is used to
          uniquely identify multiple associations between
          the local and remote peer.
          "
         ::= { cisgIpsSgTunnelHistEntry 6 }

      cisgIpsSgTunHistPeerRemoteType OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of remote peer identity. 
          "
         ::= { cisgIpsSgTunnelHistEntry 7 }

      cisgIpsSgTunHistPeerRemoteValue OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of the remote peer identity.
          "
         ::= { cisgIpsSgTunnelHistEntry 8 }

      cisgIpsSgTunHistLocalAddrType  OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of the address of the local endpoint 
          for the control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 9 }

      cisgIpsSgTunHistLocalAddr OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(0..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The address of the local endpoint for the 
          control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 10 }

      cisgIpsSgTunHistLocalName OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(0..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The DNS name of the local address for the control
          Tunnel. If the DNS name associated with the local
          tunnel endpoint is not known, then the value of this
          object will be a zero-length string.
          "
         ::= { cisgIpsSgTunnelHistEntry 11 }

      cisgIpsSgTunHistRemoteAddrType  OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of the address of the remote endpoint 
          for the control Tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 12 }

      cisgIpsSgTunHistRemoteAddr OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(0..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The address of the remote endpoint for the 
          control Tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 13 }

      cisgIpsSgTunHistRemoteName OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(0..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The DNS name of the remote address of 
          control Tunnel. If the DNS name associated with 
          the remote tunnel endpoint is not known, then the 
          value of this object will be a zero-length string.
          "
         ::= { cisgIpsSgTunnelHistEntry 14 }

      cisgIpsSgTunHistEncryptAlgo OBJECT-TYPE
         SYNTAX CIPsecEncryptAlgorithm
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The encryption algorithm used in control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 15 }

      cisgIpsSgTunHistEncryptKeySize        OBJECT-TYPE
         SYNTAX CIPsecEncryptionKeySize
         UNITS "Bits"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The size in bits of the key which was negotiated
          for the control tunnel to be used with the algorithm 
          denoted by the column 'cisgIpsSgTunEncryptAlgo'. For 
          DES and 3DES the key size is respectively 56 and 168. 
          For AES, this will denote the negotiated key size.
          "
         ::= { cisgIpsSgTunnelHistEntry 16 }

      cisgIpsSgTunHistHashAlgo OBJECT-TYPE
         SYNTAX CIPsecIkeHashAlgorithm
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The hash algorithm used in control tunnel negotiations.
          "
         ::= { cisgIpsSgTunnelHistEntry 17 }

      cisgIpsSgTunHistAuthMethod OBJECT-TYPE
         SYNTAX CIPsecIkeAuthMethod
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The authentication method used in control tunnel
          negotiations.
          "
         ::= { cisgIpsSgTunnelHistEntry 18 }

      cisgIpsSgTunHistLifeTime OBJECT-TYPE
         SYNTAX Unsigned32 (1..2147483647)                    
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The negotiated LifeTime of the control tunnel in seconds.
          "
         ::= { cisgIpsSgTunnelHistEntry 19 }

      cisgIpsSgTunHistStartTime OBJECT-TYPE
         SYNTAX TimeStamp
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of sysUpTime in hundredths of seconds when the
          control tunnel was started.
          "
         ::= { cisgIpsSgTunnelHistEntry 20 }

      cisgIpsSgTunHistActiveTime OBJECT-TYPE
         SYNTAX TimeInterval
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The length of time the control tunnel has been active
          in hundredths of seconds.
          "
         ::= { cisgIpsSgTunnelHistEntry 21 }

      cisgIpsSgTunHistInOctets OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Octets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of octets received by this control
          tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 22 }

      cisgIpsSgTunHistInPkts OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of packets received by this Phase-1
          control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 23 }

      cisgIpsSgTunHistInDropPkts OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of packets dropped by this control 
          Tunnel during receive processing.
          "
         ::= { cisgIpsSgTunnelHistEntry 24 }

      cisgIpsSgTunHistInNotifys OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Notification Payloads"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of notification payloads received by 
          this control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 25 }

      cisgIpsSgTunHistInP2SaDelReqs OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Notification Payloads"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of Phase-2 tunnel delete requests
          received by this control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 26 }

      cisgIpsSgTunHistOutOctets OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Octets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of octets sent by this control Tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 27 }

      cisgIpsSgTunHistOutPkts OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of packets sent by this control Tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 28 }

      cisgIpsSgTunHistOutDropPkts OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of packets dropped by this control
          Tunnel during send processing.
          "
         ::= { cisgIpsSgTunnelHistEntry 29 }

      cisgIpsSgTunHistOutNotifys OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Notification Payloads"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of notification payloads sent by this
          control Tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 30 }

      cisgIpsSgTunHistOutP2SaDelReqs OBJECT-TYPE
         SYNTAX Counter64
         UNITS "Notification Payloads"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The total number of Phase-2 tunnel delete requests
          sent by this control tunnel.
          "
         ::= { cisgIpsSgTunnelHistEntry 31 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The Control Tunnel Failure Group
   --
   -- This group consists of:
   -- 1) Control Failure Global Objects
   -- 2) Control Tunnel Failure Table
   -- 3) Control Tunnel Failure Table
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgFailGlobal OBJECT IDENTIFIER
                      ::= { cisgIpsSgFailures 1 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The Failure Global Control Objects
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgFailGlobalCntl OBJECT IDENTIFIER
                      ::= { cisgIpsSgFailGlobal 1 }

      cisgIpsSgFailTableSize  OBJECT-TYPE
         SYNTAX Unsigned32 (0..2147483647)
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          The window size of the Internet Key Exchange Failure 
          Tables.

          The Failure Table is implemented as a sliding window 
          in which only the last 'cisgIpsSgFailTableSize' entries 
          are maintained. This object is used specify the number 
          of entries which will be maintained in the control 
          tunnel Failure Table.

          An implementation may choose suitable minimum and
          maximum values for this element based on the local
          policy and available resources. If an SNMP SET 
          request specifies a value outside this window for 
          this element, an appropriate SNMP error code must 
          be returned.

          Setting this value to zero is equivalent to 
          deleting all conceptual rows in the archiving 
          tables ('cisgIpsSgFailTable') and disabling the 
          archiving of entries in this table.
          "
         ::= { cisgIpsSgFailGlobalCntl 1 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The Phase-1 Failure Table
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgFailTable OBJECT-TYPE
         SYNTAX SEQUENCE OF CisgIpsSgFailEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          This is the control tunnel Table and is 
          implemented as a sliding window in which only the 
          last 'N' entries are maintained. The maximum number 
          of entries is specified by the object 
          'cisgIpsSgFailTableSize'.

          The failure records are catalogued under each
          signaling protocol type; that is, the first index
          of this table is the signaling protocol identifier
          ('cisgIpsSgProtocol'). The second index 
          ('cisgIpsSgFailIndex') identifies the failure record
          uniquely in the subcategory.

          Should a failure be identified before the signaling
          protocol itself has been identified by the managed
          entity, the failure record will be classified under
          'cpUnknown'.
          "
         ::= { cisgIpsSgFailures 2 }

      cisgIpsSgFailEntry OBJECT-TYPE
         SYNTAX CisgIpsSgFailEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          Each entry contains the attributes associated
          with an Phase-1 failure.
          "
         INDEX { cisgIpsSgProtocol, cisgIpsSgFailIndex }
         ::= { cisgIpsSgFailTable 1 }

      CisgIpsSgFailEntry ::= SEQUENCE {
       cisgIpsSgFailIndex         Unsigned32,
       cisgIpsSgFailReason        INTEGER,
       cisgIpsSgFailTime          TimeStamp,
       cisgIpsSgFailLocalType     CIPsecPhase1PeerIdentityType,
       cisgIpsSgFailLocalValue    SnmpAdminString,
       cisgIpsSgFailRemoteType    CIPsecPhase1PeerIdentityType,
       cisgIpsSgFailRemoteValue   SnmpAdminString,
       cisgIpsSgFailLocalAddress  SnmpAdminString,
       cisgIpsSgFailRemoteAddress SnmpAdminString
      }

      cisgIpsSgFailIndex OBJECT-TYPE
         SYNTAX Unsigned32
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
          "
          The Phase-1 Failure Table index.
          This object has no relationship to the
          cisgIpsSgTunIndex of the tunnel when it was active.
          The value of the index is a number which
          begins at one and is incremented with each
          Phase-1 failure. The value
          of this object will wrap at 4,294,967,296.
          "
         ::= { cisgIpsSgFailEntry 1 }

      cisgIpsSgFailReason OBJECT-TYPE
         SYNTAX INTEGER{
                  other(1),
                  peerDelRequest(2),
                  peerLost(3),
                  localFailure(4),
                  authFailure(5),
                  hashValidation(6),
                  encryptFailure(7),
                  internalError(8),
                  sysCapExceeded(9),
                  proposalFailure(10),
                  peerCertUnavailable(11),
                  peerCertNotValid(12),
                  localCertExpired(13),
                  crlFailure(14),
                  peerEncodingError(15),
                  nonExistentSa(16),
                  userAuthFailure(17),
                  operRequest(18),
                  deniedByAdmissionControl(19),
                  protocolSpecific(20)
                }
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The reason for the failure. Possible reasons 
          include:
              1 = other
              2 = peer delete request was received
              3 = contact with peer was lost
              4 = local failure occurred
              5 = authentication failure
              6 = hash validation failure
              7 = encryption failure
              8 = internal error occurred
              9 = system capacity failure
             10 = proposal failure
             11 = peer's certificate is unavailable
             12 = peer's certificate was found invalid
             13 = local certificate expired
             14 = certificate revoke list (crl) failure
             15 = peer encoding error
             16 = Reference to a non-existent control tunnel
             17 = Extended User authentication failed
             18 = operator requested termination.
             19 = An attempt to establish a tunnel was aborted
                  by the admission control policy (this could
                  include a simple policy that limits the maximum
                  active tunnels)
             20 = A protocol specific reason (look in the
                  protocol-specific MIB for more info).
          "
         ::= { cisgIpsSgFailEntry 2 }

      cisgIpsSgFailTime OBJECT-TYPE
         SYNTAX TimeStamp
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of sysUpTime in hundredths of seconds
          at the time of the failure.
          "
         ::= { cisgIpsSgFailEntry 3 }

      cisgIpsSgFailLocalType OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of local peer identity.
          "
         ::= { cisgIpsSgFailEntry 4 }

      cisgIpsSgFailLocalValue OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of the local peer identity.
          "
         ::= { cisgIpsSgFailEntry 5 }

      cisgIpsSgFailRemoteType OBJECT-TYPE
         SYNTAX CIPsecPhase1PeerIdentityType
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The type of remote peer identity.
          "
         ::= { cisgIpsSgFailEntry 6 }

      cisgIpsSgFailRemoteValue OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The value of the remote peer identity.
          "
         ::= { cisgIpsSgFailEntry 7 }

      cisgIpsSgFailLocalAddress OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The address of the local peer.

          The value of cisgIpsSgFailLocalType identifies the
          type of the address contained in this object.
          "
         ::= { cisgIpsSgFailEntry 8 }

      cisgIpsSgFailRemoteAddress OBJECT-TYPE
         SYNTAX SnmpAdminString(SIZE(1..255))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
          "
          The address of the remote peer.

          The value of cisgIpsSgFailLocalType identifies the
          type of the address contained in this object.
          "
         ::= { cisgIpsSgFailEntry 9 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- The Notification Control Group
   --
   -- This group of objects controls the emission of
   -- SNMP notifications pertaining to the operation of
   -- control tunnels.
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      cisgIpsSgNotifCntlAllNotifs OBJECT-TYPE
         SYNTAX TruthValue
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          This object acts as the knob that controls the
          the administrative state of sending any notification
          defined in this MIB module. That is, a particular
          notification 'foo' defined in this MIB module is 
          enabled if and only if the expression

          cisgIpsSgNotifCntlAllNotifs && cisgIpsSgNotifCntl<foo>
          evaluates to 'true'.
          "
         DEFVAL { true }
         ::= { cisgIpsSgNotificationCntl 1 }

      cisgIpsSgNotifCntlTunnelStart OBJECT-TYPE
         SYNTAX TruthValue
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          This object defines the administrative state of
          sending the Control Tunnel Start notification.

          If the value of this object is 'true', the issuing
          of the notification 'cisgIpsSgTunnelStart' is enabled.
          "
         DEFVAL { false }
         ::= { cisgIpsSgNotificationCntl 2 }

      cisgIpsSgNotifCntlTunnelStop OBJECT-TYPE
         SYNTAX TruthValue
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          This object defines the administrative state
          of sending the Control Tunnel Stop notification.

          If the value of this object is 'true', the issuing
          of the notification 'cisgIpsSgTunnelStop' is enabled.
          "
         DEFVAL { false }
         ::= { cisgIpsSgNotificationCntl 3 }

      cisgIpsSgNotifCntlSysFailure OBJECT-TYPE
         SYNTAX TruthValue
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          This object defines the administrative state
          of sending the System Failure notification.

          If the value of this object is 'true', the issuing
          of the notification 'ciscoIpsSgSysFailure' is enabled.
          "
         DEFVAL { false }
         ::= { cisgIpsSgNotificationCntl 4 }

      cisgIpsSgNotifCntlCertCrlFail OBJECT-TYPE
         SYNTAX TruthValue
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
          "
          This object defines the administrative
          state of sending the Certificate/CRL Failure 
          notification.

          If the value of this object is 'true', the issuing
          of the notification 'ciscoIpsSgCertCrlFailure' is 
          enabled.
          "
         DEFVAL { false }
         ::= { cisgIpsSgNotificationCntl 5 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Internet Key Exchange Notifications
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      ciscoIpsSgTunnelStart NOTIFICATION-TYPE
         OBJECTS {
                   cisgIpsSgTunLocalAddressType,
                   cisgIpsSgTunLocalAddress,
                   cisgIpsSgTunRemoteAddressType,
                   cisgIpsSgTunRemoteAddress,
                   cisgIpsSgTunLifeTime
                 }
         STATUS  current
         DESCRIPTION
          "
          This notification is generated when an control tunnel
          becomes active.
          "
         ::= { ciscoIPsecSigMIBNotifs 1 }

      ciscoIpsSgTunnelStop NOTIFICATION-TYPE
         OBJECTS {
                   cisgIpsSgTunHistLocalAddrType      ,
                   cisgIpsSgTunHistLocalAddr,
                   cisgIpsSgTunHistRemoteAddrType     ,
                   cisgIpsSgTunHistRemoteAddr,
                   cisgIpsSgTunHistTermReason,
                   cisgIpsSgTunHistActiveTime
                 }
         STATUS  current
         DESCRIPTION
          "
          This notification is generated when an 
          control tunnel becomes inactive.
          "
         ::= { ciscoIPsecSigMIBNotifs 2 }

      ciscoIpsSgSysFailure NOTIFICATION-TYPE
         OBJECTS {
                   cisgIpsSgFailLocalAddress,
                   cisgIpsSgFailRemoteAddress
                 }
         STATUS  current
         DESCRIPTION
          "
          This notification is generated when the processing 
          for an control Tunnel experiences an 
          system capacity error.
          "
         ::= { ciscoIPsecSigMIBNotifs 3 }

      ciscoIpsSgCertCrlFailure NOTIFICATION-TYPE
         OBJECTS {
                   cisgIpsSgFailLocalAddress,
                   cisgIpsSgFailRemoteAddress
                 }
         STATUS  current
         DESCRIPTION
          "
          This notification is generated when the 
          processing for an control Tunnel 
          experiences a Certificate or a Certificate 
          validation (CRL or OCSP) related error.
          "
         ::= { ciscoIPsecSigMIBNotifs 4 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Conformance Information
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      ciscoIpsSgMIBCompliances   OBJECT IDENTIFIER
                      ::= { ciscoIPsecSigMIBConform 1 }

      ciscoIpsSgMIBGroups        OBJECT IDENTIFIER
                      ::= { ciscoIPsecSigMIBConform 2 }
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Compliance Statements
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      ciscoIpsSgMIBCompliance MODULE-COMPLIANCE
         STATUS      current
         DESCRIPTION
           "The compliance statement for SNMP entities
            the IPsec Signaling MIB."

         MODULE -- this module
           MANDATORY-GROUPS  { 
               ciscoIpsSgActivityGroup,
               ciscoIpsSgCoreHistoryGroup,
               ciscoIpsSgCoreFailureGroup
           }

       GROUP ciscoIpsSgHistoryGroup
       DESCRIPTION   
        "This group is optional and must be implemented 
        by the agent of the managed entity if and only
        if
         a) the managed entity implements signaling for
            IPsec and FC-SP
         b) and the managed entity implements historical 
            archiving of control tunnels."


       GROUP ciscoIpsSgFailureGroup 
       DESCRIPTION   
        "This group is optional and must be implemented 
        by the agent of the managed entity if and only
        if
         a) the managed entity implements signaling for 
            IPsec and FC-SP and
         b) the managed entity implements historical 
            archiving of setup and operational failures 
            of IPsec control tunnels."


       GROUP ciscoIpsSgNotifcationGroup
       DESCRIPTION   
        "This group is optional."

       GROUP ciscoIpsSgNotifCntlGroup 
       DESCRIPTION   
        "The agent must implement this group if it 
        implements the group 'ciscoIpsSgNotifcationGroup'."
      
       OBJECT cisgIpsSgTunAction
       MIN-ACCESS read-only
       DESCRIPTION
        "It is compliant to support only a subset of the values 
        defined."

       ::= { ciscoIpsSgMIBCompliances 1 }

   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   -- Units of Conformance: List of current groups
   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
      ciscoIpsSgActivityGroup OBJECT-GROUP
         OBJECTS {
            cisgIpsSgGlobalActiveTunnels,
            cisgIpsSgGlobalPreviousTunnels,
            cisgIpsSgGlobalInOctets,
            cisgIpsSgGlobalInPkts,
            cisgIpsSgGlobalInDropPkts,
            cisgIpsSgGlobalInNotifys,
            cisgIpsSgGlobalInP2SaDelReqs,
            cisgIpsSgGlobalOutOctets,
            cisgIpsSgGlobalOutPkts,
            cisgIpsSgGlobalOutDropPkts,
            cisgIpsSgGlobalOutNotifys,
            cisgIpsSgGlobalOutP2SaDelReqs,
            cisgIpsSgGlobalInitTunnels,
            cisgIpsSgGlobalInitTunnelFails,
            cisgIpsSgGlobalRespTunnels,
            cisgIpsSgGlobalRespTunnelFails,
            cisgIpsSgGlobalSysCapFails,
            cisgIpsSgGlobalAuthFails,
            cisgIpsSgGlobalDecryptFails,
            cisgIpsSgGlobalHashValidFails,
            cisgIpsSgGlobalBadTunnelRefs,
            cisgIpsSgGlobalInP1SaDelReqs,
            cisgIpsSgGlobalOutP1SaDelReqs,

              -- Tunnel-level metrics pertaining to
              -- Signaling
            cisgIpsSgTunLocalType,
            cisgIpsSgTunLocalValue,
            cisgIpsSgTunLocalAddressType,
            cisgIpsSgTunLocalAddress,
            cisgIpsSgTunLocalName,
            cisgIpsSgTunRemoteType,
            cisgIpsSgTunRemoteValue,
            cisgIpsSgTunRemoteAddressType ,
            cisgIpsSgTunRemoteAddress,
            cisgIpsSgTunRemoteName,
            cisgIpsSgTunEncryptAlgo,
            cisgIpsSgTunEncryptKeySize,
            cisgIpsSgTunHashAlgo,
            cisgIpsSgTunAuthMethod,
            cisgIpsSgTunLifeTime,
            cisgIpsSgTunActiveTime,
            cisgIpsSgTunInOctets,
            cisgIpsSgTunInPkts,
            cisgIpsSgTunInDropPkts,
            cisgIpsSgTunInNotifys,
            cisgIpsSgTunOutOctets,
            cisgIpsSgTunOutPkts,
            cisgIpsSgTunOutDropPkts,
            cisgIpsSgTunOutNotifys,
            cisgIpsSgTunOutP2SaDelReqs,
            cisgIpsSgTunStatus,
            cisgIpsSgTunAction    
                 }
         STATUS current
         DESCRIPTION
            "
            This group consists of:
             1) Signaling Global Objects
             2) control Tunnel table.
            "
         ::= { ciscoIpsSgMIBGroups 1 }

      ciscoIpsSgCoreHistoryGroup OBJECT-GROUP
         OBJECTS {
                   -- signaling History 
                   -- Global Control Objects
                  cisgIpsSgHistTableSize
         }
         STATUS current
         DESCRIPTION
          "
          This group consists of the core (mandatory) 
          objects pertaining to maintaining history of 
          signaling activity.
          "
         ::= { ciscoIpsSgMIBGroups 2 }

      ciscoIpsSgHistoryGroup OBJECT-GROUP
         OBJECTS {
                 cisgIpsSgTunHistTermReason     ,
                 cisgIpsSgTunHistActiveIndex    ,
                 cisgIpsSgTunHistPeerLocalType  ,
                 cisgIpsSgTunHistPeerLocalValue ,
                 cisgIpsSgTunHistPeerIntIndex   ,
                 cisgIpsSgTunHistPeerRemoteType ,
                 cisgIpsSgTunHistPeerRemoteValue,
                 cisgIpsSgTunHistLocalAddrType  ,
                 cisgIpsSgTunHistLocalAddr      ,
                 cisgIpsSgTunHistLocalName      ,
                 cisgIpsSgTunHistRemoteAddrType ,
                 cisgIpsSgTunHistRemoteAddr     ,
                 cisgIpsSgTunHistRemoteName     ,
                 cisgIpsSgTunHistEncryptAlgo    ,
                 cisgIpsSgTunHistEncryptKeySize ,
                 cisgIpsSgTunHistHashAlgo       ,
                 cisgIpsSgTunHistAuthMethod     ,
                 cisgIpsSgTunHistLifeTime       ,
                 cisgIpsSgTunHistStartTime      ,
                 cisgIpsSgTunHistActiveTime     ,
                 cisgIpsSgTunHistInOctets       ,
                 cisgIpsSgTunHistInPkts         ,
                 cisgIpsSgTunHistInDropPkts     ,
                 cisgIpsSgTunHistInNotifys      ,
                 cisgIpsSgTunHistInP2SaDelReqs  ,
                 cisgIpsSgTunHistOutOctets      ,
                 cisgIpsSgTunHistOutPkts        ,
                 cisgIpsSgTunHistOutDropPkts    ,
                 cisgIpsSgTunHistOutNotifys     ,
                 cisgIpsSgTunHistOutP2SaDelReqs
                 }
         STATUS current
         DESCRIPTION
          "
          This group consists of objects that pertain 
          to maintenance of history of 
          signaling activity.
          "
         ::= { ciscoIpsSgMIBGroups 3 }


      ciscoIpsSgCoreFailureGroup OBJECT-GROUP
         OBJECTS {
                 -- Objects associated with implementing
                 -- core failure group.
                 cisgIpsSgFailTableSize
         }
         STATUS current
         DESCRIPTION
          "
          This group consists of the core (mandatory) 
          objects pertaining to maintaining history of 
          failure signaling activity.
          "
         ::= { ciscoIpsSgMIBGroups 4 }


      ciscoIpsSgFailureGroup OBJECT-GROUP
         OBJECTS {
                   -- The Ipsec signaling failure group
                 cisgIpsSgFailReason        ,
                 cisgIpsSgFailTime          ,
                 cisgIpsSgFailLocalType     ,
                 cisgIpsSgFailLocalValue    ,
                 cisgIpsSgFailRemoteType    ,
                 cisgIpsSgFailRemoteValue   ,
                 cisgIpsSgFailLocalAddress  ,
                 cisgIpsSgFailRemoteAddress
                 }
         STATUS current
         DESCRIPTION
            "
            This group consists of objects that pertain 
            to maintenance of history of failures 
            associated with Ipsec signaling activity.
            "
         ::= { ciscoIpsSgMIBGroups 5 }

      ciscoIpsSgNotifCntlGroup OBJECT-GROUP
         OBJECTS {
                 cisgIpsSgNotifCntlAllNotifs,
                 cisgIpsSgNotifCntlTunnelStart,
                 cisgIpsSgNotifCntlTunnelStop,
                 cisgIpsSgNotifCntlSysFailure,
                 cisgIpsSgNotifCntlCertCrlFail 
                 }
         STATUS current
         DESCRIPTION
          "
          This group of objects controls the sending 
          of notifications pertaining to signaling
          operations.
          "
         ::= { ciscoIpsSgMIBGroups 6 }

        ciscoIpsSgNotifcationGroup NOTIFICATION-GROUP
           NOTIFICATIONS {
                  ciscoIpsSgTunnelStart ,
                  ciscoIpsSgTunnelStop ,
                  ciscoIpsSgSysFailure ,
                  ciscoIpsSgCertCrlFailure 
                         }
           STATUS current
           DESCRIPTION
            "
            This group contains the notifications pertaining
            to Ipsec signaling operations.
            "
         ::= { ciscoIpsSgMIBGroups 7 }

   END