ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ITP-GACT-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file CISCO-ITP-GACT-MIB and use it to monitor vendor specific OID's.

CISCO-ITP-GACT-MIB file content

Object view of CISCO-ITP-GACT-MIB:

Scalar Object
cgactMtp3TableEntry .1.3.6.1.4.1.9.9.333.1.1.1.1
A list of MTP3 accounting objects. Objects are created in this table as traffic is received and processed.
cgactGttTableEntry .1.3.6.1.4.1.9.9.333.1.2.1.1
A list of Global Title Translation accounting objects. Objects are created in this table when MTP3 packets are received requiring global title translation.
Tabular Object
cgactMtp3TableId .1.3.6.1.4.1.9.9.333.1.1.1.1.1
The accounting table identifier. 'passed' : signifies that this table instance represents statistics for packets that matched an Access Control List (ACL) in the linkset's inbound ACL and in the outbound ACL. 'violation' : signifies that this table instance represents statistics for packets that did not match an ACL in the linkset's inbound ACL and in the outbound ACL. 'unroutable' : packets that pass access list verification but can not be sent to destination point code. This could be caused by incorrect or missing route statements or inaccessible destination.
cgactMtp3LinksetName .1.3.6.1.4.1.9.9.333.1.1.1.1.2
The name of the linkset.
cgactMtp3Dpc .1.3.6.1.4.1.9.9.333.1.1.1.1.3
The destination point code.
cgactMtp3Opc .1.3.6.1.4.1.9.9.333.1.1.1.1.4
The origin point code.
cgactMtp3SI .1.3.6.1.4.1.9.9.333.1.1.1.1.5
The service indicator.
cgactMtp3InPackets .1.3.6.1.4.1.9.9.333.1.1.1.1.6
The accumulated number of packets that have been received by this linkset, DPC and OPC combination since system startup.
cgactMtp3OutPackets .1.3.6.1.4.1.9.9.333.1.1.1.1.7
The accumulated number of packets that have been sent using this linkset, DPC and OPC combination since system startup.
cgactMtp3InOctets .1.3.6.1.4.1.9.9.333.1.1.1.1.8
The accumulated number of bytes that have been received using this linkset, DPC and OPC combination since system startup.
cgactMtp3OutOctets .1.3.6.1.4.1.9.9.333.1.1.1.1.9
The accumulated number of bytes that have been sent using this linkset, DPC and OPC combination since system startup.
cgactGttLinksetName .1.3.6.1.4.1.9.9.333.1.2.1.1.1
The name of the linkset.
cgactGttSelectorName .1.3.6.1.4.1.9.9.333.1.2.1.1.2
The Global Title Selector Name.
cgactGttGta .1.3.6.1.4.1.9.9.333.1.2.1.1.3
The Global Title Address.
cgactGttTranslatedPc .1.3.6.1.4.1.9.9.333.1.2.1.1.4
The translated point code.
cgactGttPackets .1.3.6.1.4.1.9.9.333.1.2.1.1.5
The accumulated number of packets received by this signalling point requiring global title translation since system startup.
cgactGttOctets .1.3.6.1.4.1.9.9.333.1.2.1.1.6
The accumulated number of bytes received by this signalling point requiring global title translation since system startup.
Table
cgactMtp3Table .1.3.6.1.4.1.9.9.333.1.1.1
This table contains information about the number of packets and bytes at the MTP3 transport layer. The information collected from both directions(send and receive). The information is broken down by linkset, Destination Point Code (DPC), Originating Point Code (OPC) and Signalling Indicator (SI). This provides the lowest granularity required by Q752 and allows network management stations to calculate the required fields in Q752.
cgactGttTable .1.3.6.1.4.1.9.9.333.1.2.1
This table contains information about the number of packets and octets required for global title translation.
Object Identifier
ciscoGactMIB .1.3.6.1.4.1.9.9.333
The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
cgactMIBNotifs .1.3.6.1.4.1.9.9.333.0
cgactMIBObjects .1.3.6.1.4.1.9.9.333.1
cgactMIBConform .1.3.6.1.4.1.9.9.333.2
cgactMtp3 .1.3.6.1.4.1.9.9.333.1.1
cgactGtt .1.3.6.1.4.1.9.9.333.1.2
ciscoGactMIBCompliances .1.3.6.1.4.1.9.9.333.2.1
ciscoGactMIBGroups .1.3.6.1.4.1.9.9.333.2.2
Group
ciscoGactMtp3Group .1.3.6.1.4.1.9.9.333.2.2.1
A collection of objects providing MTP3 accounting feature.
ciscoGactGttGroup .1.3.6.1.4.1.9.9.333.2.2.2
A collection of objects providing Global Title Translation accounting feature.