ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ITP-GSP-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file CISCO-ITP-GSP-MIB and use it to monitor vendor specific OID's.

CISCO-ITP-GSP-MIB file content

Object view of CISCO-ITP-GSP-MIB:

Scalar Object
cgspCLLICode .1.3.6.1.4.1.9.9.336.1.1.1
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
cgspUtilSampleInterval .1.3.6.1.4.1.9.9.336.1.1.2
This object specifies the time interval used to monitor the utilization of SS7 links. This object in combination with cgspUtilThreshold, cgspLinkPlanCapacitySent and cgspLinkPlanCapacityRcvd will be used to calculate utilization of SS7 links. Changes to the polling interval will take effect after the completion of the current sample interval.
cgspUtilThreshold .1.3.6.1.4.1.9.9.336.1.1.3
This object specifies the threshold of usage for all SS7 links in SP. This object is used to determine when to generate the ciscoGspLinkRcvdUtilChange or ciscoGspLinkSentUtilChange notifications. A value of zero indicates that no default threshold is specified. Therefore, only links with non-zero values for cgspLinkUtilThresholdRcvd or cgspLinkUtilThresholdSent will generate notifications based on link utilization. Changes to the utilization threshold will take effect at the end of the current interval.
cgspUtilAbateDelta .1.3.6.1.4.1.9.9.336.1.1.4
This object allows the falling threshold to be lower than the rising threshold when calculating whether to generate the ciscoGspLinkRcvdUtilChange or ciscoGspLinkSentUtilChange notifications. This is done to prevent generating notifications for slight changes in traffic.
cgspPlanCapacityDefault .1.3.6.1.4.1.9.9.336.1.1.5
This object provides a default for value for links with a cgspLinkType='sctpIp'. For all other types of linkset this value is ignored. When a linkset based on SCTP/IP and the values for the cgspLinkPlanCapacityRcvd or cgspLinkPlanCapacitySent object are zero then this object will be used as the default. A value of zero indicates that a global default has not been specified. This object will be used in combination with cgspUtilSampleInterval, cgspUtilThreshold, cgspUtilThreshold and cgspLinkUtilThresholdRcvd to generate the ciscoGspLinkRcvdUtilChange notification.
cgspEventSequenceNumber .1.3.6.1.4.1.9.9.336.1.1.6
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
cgspProfileTableEntry .1.3.6.1.4.1.9.9.336.1.2.1.1
A list of Profile attributes. Profiles are used to specify common configuration options for SS7 links without customizing each link. A profile is created with the specified values using this table and the cgspProfileTimerTable Table. The common values are applied to all links in a linkset by specifying the cgspLinksetProfileName on the linkset.
cgspProfileTimerTableEntry .1.3.6.1.4.1.9.9.336.1.2.2.1
A list of ProfileTimer attributes. Profiles are used to specify common timer configuration options for SS7 links without customizing each link. A profile is created with the specified values using this table and the cgspProfileTable Table. The common values are applied to all links in a linkset by specifying the cgspLinksetProfileName on the linkset.
cgspInstanceTableEntry .1.3.6.1.4.1.9.9.336.1.3.1.1
A list of instance attributes.
cgspInstTimerTableEntry .1.3.6.1.4.1.9.9.336.1.3.2.1
This table is used to configure all MTP3 timer values that apply to linksets and links. The values apply to all linkset and links defined to this signalling point(instances).
cgspPointCodeTableEntry .1.3.6.1.4.1.9.9.336.1.4.1.1
A list of Point codes for a signalling point defined by an instance.
cgspLinksetTableEntry .1.3.6.1.4.1.9.9.336.1.5.1.1
A list of Signalling Point linkset attributes for Signalling Point define by this instance.
cgspLinksetTimerTableEntry .1.3.6.1.4.1.9.9.336.1.5.2.1
This table is used to configure all MTP3 timer values that apply to linksets and links. The values apply to this linkset and links it c contains.
cgspLinkTableEntry .1.3.6.1.4.1.9.9.336.1.6.1.1
A list of signalling point link attributes.
cgspLinkTimerTableEntry .1.3.6.1.4.1.9.9.336.1.6.2.1
This table is used to configure all MTP3 timer values that apply to links. The values apply to a particular link.
cgspLinkRemoteIpAddrTableEntry .1.3.6.1.4.1.9.9.336.1.6.3.1
A list of remote IP addresses per Link.
cgspLinkUtilTableEntry .1.3.6.1.4.1.9.9.336.1.6.4.1
A collection of entries used to store a history link utilization values. Values from cgspLinkUtilizationRcvd and cgspLinkUtilizationSent objects are saved in cgspLinkUtilRcvd and cgspLinkUtilSent.
cgspLsStateChangeNotifEnabled .1.3.6.1.4.1.9.9.336.1.7.1
The signalling point linkset notification truth value. 'true' Indicates that ciscoGspLinksetStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoGspLinksetStateChange notification generation is disabled.
cgspLnkStateChangeNotifEnabled .1.3.6.1.4.1.9.9.336.1.7.2
The signalling point link notification truth value. 'true' Indicates that ciscoGspLinkStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoGspLinkStateChange notification generation is disabled.
cgspCongestionNotifEnabled .1.3.6.1.4.1.9.9.336.1.7.3
The signalling point congestion notification truth value. 'true' Indicates that ciscoGspCongestionChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoGspCongestionChange notification generation is disabled.
cgspLinkUtilNotifEnabled .1.3.6.1.4.1.9.9.336.1.7.4
The signalling point link utilization notification truth value. 'true' Indicates that the notification of link utilization has been enabled. That is, the notification generation is enabled. 'false' Indicates that the notification link utilization has been disabled.
Tabular Object
cgspProfileName .1.3.6.1.4.1.9.9.336.1.2.1.1.1
Name of the profile.
cgspProfileVariant .1.3.6.1.4.1.9.9.336.1.2.1.1.2
The SS7 variant used to format data specified in this profile.
cgspProfileMtp2BundleTimer .1.3.6.1.4.1.9.9.336.1.2.1.1.3
Bundle timer value. This value is used to control the bundling of SS7 packets as they are transported within the device. The value of zero indicates that MTP3 packets will not be bundled for transmission as they arrival for transmission at the MTP2 layer. A non-zero value specifies the maximum delay time used to collect MTP3 packets before they are transmitted by the MTP2 layer.
cgspProfileMtp2SendQueueDepth .1.3.6.1.4.1.9.9.336.1.2.1.1.4
The maximum Queue depth allowed per link for MTP2 waiting to be transmitted.
cgspProfileRowStatus .1.3.6.1.4.1.9.9.336.1.2.1.1.5
The object is used by a management station to create or delete the row entry in cgspProfileTable following the RowStatus textual convention.
cgspInstNetwork .1.3.6.1.4.1.9.9.336.1.3.1.1.1
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
cgspProfileTimerNumber .1.3.6.1.4.1.9.9.336.1.2.2.1.1
Index into table containing timer information.
cgspProfileTimerValue .1.3.6.1.4.1.9.9.336.1.2.2.1.2
Value of timer selected by cgspProfileTimerNumber object.
cgspProfileTimerRowStatus .1.3.6.1.4.1.9.9.336.1.2.2.1.3
The object is used by a management station to create or delete the row entry in cgspProfileTimerTable following the RowStatus textual convention.
cgspInstNetworkIndicator .1.3.6.1.4.1.9.9.336.1.3.1.1.2
The Network Indicator for this Signalling point instance.
cgspInstVariant .1.3.6.1.4.1.9.9.336.1.3.1.1.3
The SS7 variant used to format data used by this instance.
cgspInstDisplayName .1.3.6.1.4.1.9.9.336.1.3.1.1.4
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
cgspInstDescription .1.3.6.1.4.1.9.9.336.1.3.1.1.5
A textual description for the Signalling point.
cgspInstTFR .1.3.6.1.4.1.9.9.336.1.3.1.1.6
Allow transfer restricted messages. 'true' TFR are allowed. 'false' TFR are disabled.
cgspInstCongestionsLevels .1.3.6.1.4.1.9.9.336.1.3.1.1.7
Allow multiple congestion levels. 'true' multiple congestion levels are allowed. 'false' multiple congestion levels are disabled.
cgspInstFastRestart .1.3.6.1.4.1.9.9.336.1.3.1.1.8
The support for fast restarts as follows. 'true' fast restart is enabled. 'false' fast restart is disabled.
cgspInstDistSccpUnseq .1.3.6.1.4.1.9.9.336.1.3.1.1.9
Evenly distribute Class 0 SCCP messages as follows. 'true' Evenly distribute 0 SCCP messages is enabled. 'false' Evenly distribute 0 SCCP messages is disabled.
cgspInstSummaryRoutingException .1.3.6.1.4.1.9.9.336.1.3.1.1.10
This object is used to control the usage of the summary route when both a summary route (or ANSI cluster route) and a full point-code route (within that summary) are configured. The object is used to indicate whether the summary route is to be used when the full point-code destination is inaccessible as follows. 'true' Use summary routing. 'false' Do not use summary routing.
cgspInstNumber .1.3.6.1.4.1.9.9.336.1.3.1.1.11
A unique Identifier assigned to each instance.
cgspInstRouteTableName .1.3.6.1.4.1.9.9.336.1.3.1.1.12
The routing table for Signalling network management messages.
cgspInstRowStatus .1.3.6.1.4.1.9.9.336.1.3.1.1.13
The object is used by a management station to create or delete the row entry in cgspInstanceTable following the RowStatus textual convention.
cgspInstTimerNumber .1.3.6.1.4.1.9.9.336.1.3.2.1.1
Index into table containing timer information.
cgspInstTimerValue .1.3.6.1.4.1.9.9.336.1.3.2.1.2
Value of timer selected by cgspInstTimerNumber object.
cgspInstTimerRowStatus .1.3.6.1.4.1.9.9.336.1.3.2.1.3
The object is used by a management station to create or delete the row entry in cgspInstTimerTable following the RowStatus textual convention.
cgspPointCodeNi .1.3.6.1.4.1.9.9.336.1.4.1.1.1
The network Indicator for this pointcode.
cgspPointCodeBin .1.3.6.1.4.1.9.9.336.1.4.1.1.2
The point code for this Signalling Point.
cgspPointCodeType .1.3.6.1.4.1.9.9.336.1.4.1.1.3
The function of this point code.
cgspPointCodeDisplay .1.3.6.1.4.1.9.9.336.1.4.1.1.4
The point code for this Signalling Point.
cgspPointCodeRowStatus .1.3.6.1.4.1.9.9.336.1.4.1.1.5
The object is used by a management station to create or delete the row entry in cgspPointCodeTable following the RowStatus textual convention.
cgspLinksetName .1.3.6.1.4.1.9.9.336.1.5.1.1.1
The name of the linkset.
cgspLinksetSourcePointCode .1.3.6.1.4.1.9.9.336.1.5.1.1.2
The point code to which this linkset is connected.
cgspLinksetSourceDisplayPC .1.3.6.1.4.1.9.9.336.1.5.1.1.3
The point code to which this linkset is connected.
cgspLinksetAdjacentPointCode .1.3.6.1.4.1.9.9.336.1.5.1.1.4
The point code to which this linkset is connected.
cgspLinksetAdjacentDisplayPC .1.3.6.1.4.1.9.9.336.1.5.1.1.5
The point code to which this linkset is connected.
cgspLinksetState .1.3.6.1.4.1.9.9.336.1.5.1.1.6
The list of possible linkset states. 'available' : Traffic may flow over this linkset 'shutdown' : This linkset has been forced to an unavailable state by an administrative action. 'unavailable': The linkset is currently unable to support traffic. Activation of this linkset will occur as required by protocol.
cgspLinksetInboundAcl .1.3.6.1.4.1.9.9.336.1.5.1.1.7
Packets are filtered against this access control list before they are passed to the routing function. A value of zero indicates that no access control list is present.
cgspLinksetOutboundAcl .1.3.6.1.4.1.9.9.336.1.5.1.1.8
Packets are filtered against this access control list after they have passed through the routing function. A value of zero indicates that no access control list is present.
cgspLinksetAccountingMtp3 .1.3.6.1.4.1.9.9.336.1.5.1.1.9
This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cgactMtp3Table. 'false' Indicates that the accounting function is disabled.
cgspLinksetAccountingGtt .1.3.6.1.4.1.9.9.336.1.5.1.1.10
This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cgactMtp3Table. 'false' Indicates that the accounting function is disabled.
cgspLinksetNumLinks .1.3.6.1.4.1.9.9.336.1.5.1.1.11
The number of links in this linkset.
cgspLinksetDurationInService .1.3.6.1.4.1.9.9.336.1.5.1.1.12
Time linkset was providing service related to Q752/Table 4.2.
cgspLinksetDurationOutService .1.3.6.1.4.1.9.9.336.1.5.1.1.13
Time linkset was Out-of-Service as required for Q752/Table 4.2.
cgspLinksetActPriority .1.3.6.1.4.1.9.9.336.1.5.1.1.14
Defines the activation priority for linksets. The linksets with the lowest values will be activated first. If two or more linksets share the same values they will be activated in the order they were defined.
cgspLinksetDisplayName .1.3.6.1.4.1.9.9.336.1.5.1.1.15
A short identifier for each linkset. This value can be set by system administrator or defaults to the linkset name.
cgspLinksetDescription .1.3.6.1.4.1.9.9.336.1.5.1.1.16
A textual description for the Signalling point.
cgspLinksetRotateSlsEnable .1.3.6.1.4.1.9.9.336.1.5.1.1.17
This defines whether signalling link selector(SLS) will be rotated. This option only applies to ANSI variant and will return false for all other variants. By default SLS rotation is enable by default for ANSI linksets. ANSI specifications state that SLS rotation should not be performed on C type linksets. This object can be used to disable SLS rotation. 'true' Indicates that SLS rotation is enable for this linkset. 'false' Indicates that SLS rotation is disable for this linkset.
cgspLinksetRotateSlsShift .1.3.6.1.4.1.9.9.336.1.5.1.1.18
This value used to shift the signalling link selector(SLS) when rotation is enabled. This option only applies to ANSI variant and will return 0 all other variants.
cgspLinksetProfileName .1.3.6.1.4.1.9.9.336.1.5.1.1.19
When specified this object indicates which profile will be used to establish defaults for common configuration values like MTP2 and MTP3 timers. The null string is used to indicate that the linkset does not have a profile.
cgspLinksetAdjacentInst .1.3.6.1.4.1.9.9.336.1.5.1.1.20
When a linkset is used to carry traffic between different instances, this object contains the network name used as an index into the cgspInstanceTable table. In all other cases the object will contain the same network name as the source signalling point.
cgspLinksetRowStatus .1.3.6.1.4.1.9.9.336.1.5.1.1.21
The object is used by a management station to create or delete the row entry in cgspLinksetTable following the RowStatus textual convention.
cgspLinksetTimerNumber .1.3.6.1.4.1.9.9.336.1.5.2.1.1
Index into table containing timer information.
cgspLinksetTimerValue .1.3.6.1.4.1.9.9.336.1.5.2.1.2
Value of timer selected by cgspLinksetTimerNumber object.
cgspLinksetTimerRowStatus .1.3.6.1.4.1.9.9.336.1.5.2.1.3
The object is used by a management station to create or delete the row entry in cgspLinksetTimerTable following the RowStatus textual convention.
cgspLinkSlc .1.3.6.1.4.1.9.9.336.1.6.1.1.1
The Signalling Link Code for this link.
cgspLinkDescription .1.3.6.1.4.1.9.9.336.1.6.1.1.2
A textual description for this link.
cgspLinkState .1.3.6.1.4.1.9.9.336.1.6.1.1.3
The list of possible links states. 'available' : Traffic may flow over this linkset 'failed' : Traffic management has detected a failure that prevents activating this linkset. 'shutdown' : This linkset has been forced to an unavailable state by an administrative action. 'unavailable': The linkset is currently unable to support traffic. Activation of this linkset will occur as required by protocol.
cgspLinkReason .1.3.6.1.4.1.9.9.336.1.6.1.1.4
This object provides additional information on the source of a link failure. This object will contain the last reason that caused the link to fail. 'unknown' : Link has failed do to an undetermined cause. 'changeOverInProgress' : Change over in progress. 'mgmtDisconnectRequest' : Management disconnect request. 'linkAlignmentLost' : Link alignment lost. 'connectionLost' : Link connection lost. 'localDisconnect' : Local Disconnect. 'remoteDisconnect' : Remote Disconnect. 'suermFailure' : Signal unit error rate monitor failure. 't1Timeout' : T1 timeout no FISU received. 't2Timeout' : T2 timeout no SIO received. 't3Timeout' : T3 timeout no SIN received. 't6Timeout' : T6 timeout excessive congestion. 't7Timeout' : T7 timeout excessive acknowledgement delay. 'provingFailure' : Link proving failure. 'protocolError-BSN' : Abnormal BSN received. 'protocolError-FIB' : Abnormal FIB received. 'protocolError-SIN' : Abnormal SIB received. 'protocolError-LSSU' : Abnormal LSSU received. 'peerNotReady' : Peer not ready. 'communicationLost' : Communication lost. 'noListenPosted' : No Listen posted. 'bufferNotAvailable' : Unable to allocate buffer. 'cardRemoved' : Link card removed. 'cardInserted' : Link card Inserted. 'falseLinkCongestion' : false link congestion. 'configDownload' : Configuration downloading. 'localInhibit' : Local request to inhibit link. 'localUninhibit' : Local request to uninhibit link. 'remoteInhibit' : Remote request to inhibit link. 'remoteUninhibit': Local request to uninhibit link. 'localBlocked' : Local Processor outage. 'localUnBlocked' : Local Processor recovery. 'remoteBlocked' : Remote Processor outage. 'remoteUnblocked': Remote Processor recovery.
cgspLinkType .1.3.6.1.4.1.9.9.336.1.6.1.1.5
The link type.
cgspLinkifIndex .1.3.6.1.4.1.9.9.336.1.6.1.1.6
If the link type specified by cgspLinkType is serial or high speed Link, this is the ifIndex specified in IF-MIB, otherwise no significance is to be placed on this value.
cgspLinkSctpAssociation .1.3.6.1.4.1.9.9.336.1.6.1.1.7
Association Identifiers can be greater than 65,535. This object has been replaced by cgspLinkSctpAssociationId.
cgspLinkXmitQueueDepth .1.3.6.1.4.1.9.9.336.1.6.1.1.8
Number of packets waiting to be sent over this link.
cgspLinkXmitQueueDepthHigh .1.3.6.1.4.1.9.9.336.1.6.1.1.9
This is the maximum number of packets waiting to be sent over this link since the last time this value was reset as indicated by cgspLinkXmitQueueDepthHighRT. Resetting this object is achieved by setting this object to 0. Attempting to set this object to any other value will result in a wrongValue (SNMPv2c, SNMPv3) or badValue (SNMPv1).
cgspLinkXmitQueueDepthHighRT .1.3.6.1.4.1.9.9.336.1.6.1.1.10
This indicates when cgspLinkXmitQueueDepthHigh was last set to 0.
cgspLinkCongestionState .1.3.6.1.4.1.9.9.336.1.6.1.1.11
The Signalling link congestion status of this link. 0 is the least congestion level, 3 is the highest congestion level.
cgspLinkCongestionAbate1 .1.3.6.1.4.1.9.9.336.1.6.1.1.12
Threshold used to abate congestion level 1.
cgspLinkCongestionAbate2 .1.3.6.1.4.1.9.9.336.1.6.1.1.13
Threshold used to abate congestion level 2.
cgspLinkCongestionAbate3 .1.3.6.1.4.1.9.9.336.1.6.1.1.14
Threshold used to abate congestion level 3.
cgspLinkCongestionOnset1 .1.3.6.1.4.1.9.9.336.1.6.1.1.15
Threshold used to mark onset of congestion level 1.
cgspLinkCongestionOnset2 .1.3.6.1.4.1.9.9.336.1.6.1.1.16
Threshold used to mark onset of congestion level 2.
cgspLinkCongestionOnset3 .1.3.6.1.4.1.9.9.336.1.6.1.1.17
Threshold used to mark onset of congestion level 3.
cgspLinkSigLinkTest .1.3.6.1.4.1.9.9.336.1.6.1.1.18
Indicated if Signalling link test is enabled on this link. true : Signalling link test is enabled. false : Signalling link test not enabled.
cgspLinkQ752T1E1 .1.3.6.1.4.1.9.9.336.1.6.1.1.19
Duration of link in the In-Service state Q752/1.1.
cgspLinkQ752T1E2 .1.3.6.1.4.1.9.9.336.1.6.1.1.20
Count of Signalling Link failures - All reasons Q752/1.2.
cgspLinkQ752T1E3 .1.3.6.1.4.1.9.9.336.1.6.1.1.21
Count of Signalling Link failures - Abnormal FIBR/BSNR Q752/1.3
cgspLinkQ752T1E5 .1.3.6.1.4.1.9.9.336.1.6.1.1.22
Count of Signalling Link failures - Excessive error rate Q752/1.5.
cgspLinkQ752T1E7 .1.3.6.1.4.1.9.9.336.1.6.1.1.23
Count of alignment or proving errors Q752/1.7.
cgspLinkQ752T1E8 .1.3.6.1.4.1.9.9.336.1.6.1.1.24
Count of signal units received in error Q752/1.8.
cgspLinkQ752T1E9 .1.3.6.1.4.1.9.9.336.1.6.1.1.25
Count of negative acknowledgements received Q752/1.9.
cgspLinkQ752T1E10 .1.3.6.1.4.1.9.9.336.1.6.1.1.26
Count of 'local automatic changeover' events Q752/1.10.
cgspLinkQ752T1E11 .1.3.6.1.4.1.9.9.336.1.6.1.1.27
Count of 'local automatic changeback' events Q752/1.11.
cgspLinkQ752T2E1 .1.3.6.1.4.1.9.9.336.1.6.1.1.28
Duration of Signalling Link unavailable(for any reason) Q752/2.1.
cgspLinkQ752T2E5 .1.3.6.1.4.1.9.9.336.1.6.1.1.29
Duration of Signalling Link unavailable due to local management actions Q752/2.5.
cgspLinkQ752T2E6 .1.3.6.1.4.1.9.9.336.1.6.1.1.30
Duration of Signalling Link unavailable due to remote management actions Q752/2.6.
cgspLinkQ752T2E7 .1.3.6.1.4.1.9.9.336.1.6.1.1.31
Duration of Signalling Link unavailable due to link failure Q752/2.7.
cgspLinkQ752T2E9 .1.3.6.1.4.1.9.9.336.1.6.1.1.32
Duration of Signalling Link unavailable due to remote processor outage Q752/2.9.
cgspLinkQ752T2E10 .1.3.6.1.4.1.9.9.336.1.6.1.1.33
Count of 'remote processor outage' events Q752/2.10 and Q752/2.11. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cgspLinkQ752T2E15 .1.3.6.1.4.1.9.9.336.1.6.1.1.34
Count of Status Indicator Busy received Q752/2.15.
cgspLinkQ752T2E16 .1.3.6.1.4.1.9.9.336.1.6.1.1.35
Count of local inhibition Q752/2.16 and Q752/2.17. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cgspLinkQ752T2E18 .1.3.6.1.4.1.9.9.336.1.6.1.1.36
Count of remote inhibition Q752/2.18 and Q752/2.19. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cgspLinkQ752T3E1 .1.3.6.1.4.1.9.9.336.1.6.1.1.37
The number of MTP3 bytes sent by this link. This measurement is specified in Q752/3.1
cgspLinkQ752T3E2Bytes .1.3.6.1.4.1.9.9.336.1.6.1.1.38
The number of MTP3 bytes retransmitted on this link. This measurement is specified in Q752/3.2
cgspLinkQ752T3E2Packets .1.3.6.1.4.1.9.9.336.1.6.1.1.39
The number of MTP3 packets retransmitted on this link. This measurement is specified in Q752/3.2
cgspLinkQ752T3E3 .1.3.6.1.4.1.9.9.336.1.6.1.1.40
The number of MTP3 packets sent by this link. This measurement is specified in Q752/3.3.
cgspLinkQ752T3E4 .1.3.6.1.4.1.9.9.336.1.6.1.1.41
The number of MTP3 bytes received by this link. This measurement is specified in Q752/3.4
cgspLinkQ752T3E5 .1.3.6.1.4.1.9.9.336.1.6.1.1.42
The number of MTP3 packets received by this link. This measurement is specified in Q752/3.5
cgspLinkQ752T3E6 .1.3.6.1.4.1.9.9.336.1.6.1.1.43
The number times this Signalling link was marked congested. This measurement is specified in Q752/3.6
cgspLinkQ752T3E7 .1.3.6.1.4.1.9.9.336.1.6.1.1.44
Cumulative duration of Signalling link congestion Q752/3.7.
cgspLinkQ752T3E10L1 .1.3.6.1.4.1.9.9.336.1.6.1.1.45
The number of packets(MSUs) discarded due to Signalling link level 1 congestion Q752/3.10
cgspLinkQ752T3E10L2 .1.3.6.1.4.1.9.9.336.1.6.1.1.46
The number of packets(MSUs) discard due to Signalling link level 2 congestion Q752/3.10
cgspLinkQ752T3E10L3 .1.3.6.1.4.1.9.9.336.1.6.1.1.47
The number of packets(MSUs) discard due to Signalling link level 3 congestion Q752/3.10
cgspLinkQ752T3E11L1 .1.3.6.1.4.1.9.9.336.1.6.1.1.48
The number times this Signalling link entered congestion level 1 and packets were discarded. This measurement is specified in Q752/3.11
cgspLinkQ752T3E11L2 .1.3.6.1.4.1.9.9.336.1.6.1.1.49
The number times this Signalling link entered congestion level 2 and packets were discarded. This measurement is specified in Q752/3.11
cgspLinkQ752T3E11L3 .1.3.6.1.4.1.9.9.336.1.6.1.1.50
The number times this Signalling link entered congestion level 3 and packets were discarded. This measurement is specified in Q752/3.11
cgspLinkLocalPeerPort .1.3.6.1.4.1.9.9.336.1.6.1.1.51
When cgspLinkType is set to 'sctpIp' then this object contains the local port number used to create the association supporting this link. This object can be used to obtain information from the cgsp2LocalPeerTable and cgsp2LpIpAddrTable Tables in the CISCO-ITP-GSP2-MIB.my MIB.
cgspLinkRemotePeerPort .1.3.6.1.4.1.9.9.336.1.6.1.1.52
When cgspLinkType is set to 'sctpIp' then this object contains the remote port number used to create the association supporting this link. When cgspLinkType is not set to 'sctpIp' then no significance is to be placed on this value.
cgspLinkQosClass .1.3.6.1.4.1.9.9.336.1.6.1.1.53
When cgspLinkType is set to 'sctpIp' then this object contains the quality of service class to be assigned to packets sent on this association. When cgspLinkType is not set to 'sctpIp' then no significance is to be placed on this value.
cgspLinkDisplayName .1.3.6.1.4.1.9.9.336.1.6.1.1.54
A short identifier for each link linkset. This value can be set by system administrator or defaults to the linkset name and SLC formatted as an ASCII string.
cgspLinkDroppedPkts .1.3.6.1.4.1.9.9.336.1.6.1.1.55
The number of packets that were dropped by this link.
cgspLinkTransmittedLSSUs .1.3.6.1.4.1.9.9.336.1.6.1.1.56
The number of Link Status Signal Units sent on this link.
cgspLinkReceivedLSSUs .1.3.6.1.4.1.9.9.336.1.6.1.1.57
The number of Link Status Signal Units received on this link.
cgspLinkProtocolDetails .1.3.6.1.4.1.9.9.336.1.6.1.1.58
This object provide details on the protocol states for this link as follows. Changeback control(TCBC) 'tcbcBuffering': Changeback control is buffering data on this link. Changeover control(TCOC) 'tcocBuffering': Changeover control is buffering data on this link Link availability control(TLAC) 'tlacAdjacentSpRestarting': Adjacent Signalling point is restarting. 'tlacEmergencyCoInProgress': Emergency changeover is in progress on this link. 'tlacChangebackInProgress': Changeback is in progress on this link. 'tlacChangeoverInProgress': Changeover is in progress on this link. 'tlacChangeoverFailed': The last changeover operation failed on this link. 'tlacInhibitRetry': Inhibit command will be retried. 'tlacManagementRequest': Management request in progress for this link. 'tlacSpRestarting': Signalling point is in the process of a restart. 'tlacLocalInhibit': Link has been inhibited by a local management operation. 'tlacRemoteInhibit': Link has been inhibited by a remote management operation. 'tlacLocalBlocked': Link is blocked because of a local processor outage. 'tlacRemoteBlocked': Link is blocked because of a remote processor outage. Signalling routing control(TSRC) 'tsrcChangeOverComplete': Changeove request is complete. 'tsrcAdjacentSpRestart': Adjacent Signalling Point is restarting.
cgspLinkLsacState .1.3.6.1.4.1.9.9.336.1.6.1.1.59
Signalling link activity control state: 'undefined' - link is an undefined state 'inactive' - A Signalling link that is not in operation. 'active' - A Signalling link that is in operation. 'activatingRestoring' - A Signalling that is not operational and is being activated or restored. 'failed' - A Signalling link which is available (not blocked) is marked by level 3 as failed when a changeover order is received. 'actT17wait' - Link activation has failed. Link is placed into this state to wait for timer T17 to expire in order to avoid the oscillation of initial alignment failure and link restart. 'actAnsiWaitDeloaded - Waiting for change back acknowledgement (second attempt). 'actItuWaitStmReady' Wait for Signalling Traffic Management ready event.
cgspLinkTsrcState .1.3.6.1.4.1.9.9.336.1.6.1.1.60
Signalling traffic management routing control state: 'undefined' - link is an undefined state 'idle' - traffic mangement is idle 'wait5' - traffic management is active and in the sending status phase
cgspLinkTcocState .1.3.6.1.4.1.9.9.336.1.6.1.1.61
Changeover control State: 'undefined' - Link is an undefined state. 'idle' - Link is available and idle. 'wait2' - Wait for MTP2 to initialize link. 'waitForAck' - Waiting for changeover acknowledgement. 'retrieving' - Packets are being retrieved from link. 'wait5' - Wait state when transitioning from idle state. 'wait7' - Delay to avoid message mis-sequencing on changeover 'wait8' - Wait state prior to processing changeover order or emergency changeover order events.
cgspLinkTcocLocalBSNT .1.3.6.1.4.1.9.9.336.1.6.1.1.62
The local backward sequence number to be transmitted.
cgspLinkTcocRemoteBSNT .1.3.6.1.4.1.9.9.336.1.6.1.1.63
The remote backward sequence number to be transmitted.
cgspLinkTcbcState .1.3.6.1.4.1.9.9.336.1.6.1.1.64
Changeback control State: 'undefined' - link is an undefined state. 'idle' - Link is available and idle. 'firstAttempt' - First attempt at changeback. 'secondAttempt' - Second attempt at changeback 'timeControlledDiversion' - Changeback using time controlled Diversion.
cgspLinkReceivedSIBs .1.3.6.1.4.1.9.9.336.1.6.1.1.65
The number of status indicator 'busy' link status signal units received on this link. The SIB indicates that level two is congested at the transmitting Signalling point.
cgspLinkTransmittedSIBs .1.3.6.1.4.1.9.9.336.1.6.1.1.66
The number of status indicator 'busy' link status signal units transmitted on this link. The SIB indicates that level two is congested at the transmitting Signalling point.
cgspLinkMtp2T01Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.67
The number of times the alignment ready timer has expired on this link.
cgspLinkMtp2T02Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.68
The number of times the not alignment ready timer has expired on this link.
cgspLinkMtp2T03Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.69
The number of times the aligned timer has expired on this link.
cgspLinkMtp2T04Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.70
The number of times the proving period timer has expired on this link.
cgspLinkMtp2T05Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.71
The number of times the sending status indicator busy timer has expired on this link.
cgspLinkMtp2T06Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.72
The number of times the remote congestion timer has expired on this link(Q752/1.6).
cgspLinkMtp2T07Counts .1.3.6.1.4.1.9.9.336.1.6.1.1.73
The number of times the excessive delay of acknowledgement timer has expired on this link(Q752/1.4).
cgspLinkOMAERMCounts .1.3.6.1.4.1.9.9.336.1.6.1.1.74
The number of times the Alignment Error Rate Monitor procedure was started on this link.
cgspLinkOMAERMFailCounts .1.3.6.1.4.1.9.9.336.1.6.1.1.75
The number of times the Alignment Error Rate Monitor procedure failed on this link.
cgspLinkOMSURMCounts .1.3.6.1.4.1.9.9.336.1.6.1.1.76
The number of times the Signal Unit Error Rate Monitor procedure was started on this link.
cgspLinkOMSURMFailCounts .1.3.6.1.4.1.9.9.336.1.6.1.1.77
The number of times the Signal Unit Error Rate Monitor procedure failed on this link.
cgspLinkPlanCapacityRcvd .1.3.6.1.4.1.9.9.336.1.6.1.1.78
An estimate of the number of bits per second that is expected to be received from this link. This object will be used in combination with cgspUtilSampleInterval, cgspUtilThreshold, cgspUtilThreshold and cgspLinkUtilThresholdRcvd to generate the ciscoGspLinkRcvdUtilChange notification.
cgspLinkUtilThresholdRcvd .1.3.6.1.4.1.9.9.336.1.6.1.1.79
This object specifies the threshold used to to generate the ciscoGspLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cgspLinksetUtilThresholdRcvd or cgspUtilThreshold objects will be used to generate the ciscoGspLinkRcvdUtilChange notification.
cgspLinkUtilizationRcvd .1.3.6.1.4.1.9.9.336.1.6.1.1.80
An estimate of the utilization of this link for traffic received on this link in the prior time period defined by the cgspUtilSampleInterval object.
cgspLinkUtilStateRcvd .1.3.6.1.4.1.9.9.336.1.6.1.1.81
Link Utilization State for inbound traffic.
cgspLinkL2BytesRcvd .1.3.6.1.4.1.9.9.336.1.6.1.1.82
A count of the bytes received on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.
cgspLinkPlanCapacitySent .1.3.6.1.4.1.9.9.336.1.6.1.1.83
An estimate of the number of bits per second that is expected to be sent on this link. This object will be used in combination with cgspUtilSampleInterval, cgspUtilThreshold and cgspLinkUtilThresholdRcvd to generate the ciscoGspLinkSentUtilChange notification.
cgspLinkUtilThresholdSent .1.3.6.1.4.1.9.9.336.1.6.1.1.84
This object specifies the threshold used to generate the ciscoGspLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cgspLinksetUtilThresholdRcvd or cgspUtilThreshold objects will be used to generate the ciscoGspLinkRcvdUtilChange notification.
cgspLinkUtilizationSent .1.3.6.1.4.1.9.9.336.1.6.1.1.85
An estimate of the utilization of this link for traffic sent on this link in the prior time period defined by the cgspUtilSampleInterval object.
cgspLinkUtilStateSent .1.3.6.1.4.1.9.9.336.1.6.1.1.86
Link Utilization State for out bound traffic.
cgspLinkL2BytesSent .1.3.6.1.4.1.9.9.336.1.6.1.1.87
A count of the bytes sent on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.
cgspLinkTestResult .1.3.6.1.4.1.9.9.336.1.6.1.1.88
This object provides information on result from signalling link test received on this link.
cgspLinkRowStatus .1.3.6.1.4.1.9.9.336.1.6.1.1.89
The object is used by a management station to create or delete the row entry in cgspLinkTable following the RowStatus textual convention.
cgspLinkSctpAssociationId .1.3.6.1.4.1.9.9.336.1.6.1.1.90
If the link type specified by cgspLinkType is 'sctpIp', this is the association identifier defined in the Stream Control Transmission Protocol(SCTP) MIB. Where value greater than zero indicates a valid association. The zero value indicates an association does not exist for this link. This value will always be set to zero one when cgspLinkType is not equal to the 'sctpIp' value. This object replaces cgspLinkSctpAssociation and allows association identifiers to be larger than 65,535.
cgspLinkTimerNumber .1.3.6.1.4.1.9.9.336.1.6.2.1.1
Index into table containing timer information.
cgspLinkTimerValue .1.3.6.1.4.1.9.9.336.1.6.2.1.2
Value of timer selected by cgspLinkTimerNumber object.
cgspLinkTimerRowStatus .1.3.6.1.4.1.9.9.336.1.6.2.1.3
The object is used by a management station to create or delete the row entry in cgspLinkTimerTable following the RowStatus textual convention.
cgspLinkRemoteIpAddrNumber .1.3.6.1.4.1.9.9.336.1.6.3.1.1
This object specifies the index for the IP addresses in the remote IP Address table
cgspLinkRemoteIpAddrType .1.3.6.1.4.1.9.9.336.1.6.3.1.2
This object contains the type of the local IP address used to create an association.
cgspLinkRemoteIpAddress .1.3.6.1.4.1.9.9.336.1.6.3.1.3
This object contains the remote IP address used to create the association with the partner of this association.
cgspLinkRemoteIpAddrRowStatus .1.3.6.1.4.1.9.9.336.1.6.3.1.4
The object is used by a management station to create or delete the row entry in cgspLinkRemoteIpAddrTable following the RowStatus textual convention.
cgspLinkUtilIndex .1.3.6.1.4.1.9.9.336.1.6.4.1.1
Index used to access historical link utilization information. Entry one corresponds to the most recent utilization window for the length of time specified by the cgspUtilSampleInterval object. Example of utilization history using default values. Current Time: 10:42 am Sample Interval: 300 seconds cgspLinkUtilIndex [1] Window from 10:36-10:41 [2] Window from 10:31-10:36 [3] Window from 10:26-10:31 . . [n] The index ranges from one to a maximum of sixty entries. The actual number of entries will depend on the implementation and available resources.
cgspLinkUtilRcvd .1.3.6.1.4.1.9.9.336.1.6.4.1.2
An estimate of the utilization of this link for traffic received on this link in the time period defined by the cgspUtilSampleInterval object.
cgspLinkUtilSent .1.3.6.1.4.1.9.9.336.1.6.4.1.3
An estimate of the utilization of this link for traffic transmitted on this link in the time period defined by the cgspUtilSampleInterval object.
cgspLinkUtilEndTimestamp .1.3.6.1.4.1.9.9.336.1.6.4.1.4
This timestamp indicates when time period ended for this sample.
Table
cgspProfileTable .1.3.6.1.4.1.9.9.336.1.2.1
A table that contains the Profiles of signalling points. Entries are added to this table via cgspProfileRowStatus in accordance with the RowStatus convention.
cgspProfileTimerTable .1.3.6.1.4.1.9.9.336.1.2.2
A table that contains a profile of timers used to configure SS7 links. Entries are added to this table via cgspProfileTimerRowStatus in accordance with the RowStatus convention.
cgspInstanceTable .1.3.6.1.4.1.9.9.336.1.3.1
A table that contains the instances of signalling points. Entries are added to this table via cgspInstRowStatus in accordance with the RowStatus convention.
cgspInstTimerTable .1.3.6.1.4.1.9.9.336.1.3.2
A table that contains the timer used to configure an instances of signalling points. Entries are added to this table via cgspInstTimerRowStatus in accordance with the RowStatus convention.
cgspPointCodeTable .1.3.6.1.4.1.9.9.336.1.4.1
A table that contains a list of point code defined for the Signalling point defined by this instance. Entries are added to this table via cgspPointCodeRowStatus in accordance with the RowStatus convention.
cgspLinksetTable .1.3.6.1.4.1.9.9.336.1.5.1
A table of linksets for this Signalling Point defined by this instance.
cgspLinksetTimerTable .1.3.6.1.4.1.9.9.336.1.5.2
A table that contains the timer used to configure timer values specific to a particular linkset. Entries are added to this table via cgspLinksetTimerRowStatus in accordance with the RowStatus convention.
cgspLinkTable .1.3.6.1.4.1.9.9.336.1.6.1
A table of links for each Signalling Point.
cgspLinkTimerTable .1.3.6.1.4.1.9.9.336.1.6.2
A table that contains the timer used to configure timer values specific to a particular Link. Entries are added to this table via cgspLinkTimerRowStatus in accordance with the RowStatus convention.
cgspLinkRemoteIpAddrTable .1.3.6.1.4.1.9.9.336.1.6.3
A table that contains the remote IP addresses used to configure a particular Link. Entries are added to this table via cgspLinkRemoteIpAddrRowStatus in accordance with the RowStatus convention.
cgspLinkUtilTable .1.3.6.1.4.1.9.9.336.1.6.4
A table that contains a history of the cgspLinkUtilizationRcvd and cgspLinkUtilizationRcvd objects. In order to properly manage network capacity it is necessary to collect utilization information during short interval. These intervals are less than 5 minutes and can be as low as 1 minute. The number of links supported by a signalling point prevent polling each signalling point to collect information. This table is provided to allow an NMS to collect the information during a normal poll cycle.
Trap
ciscoGspLinksetStateChange .1.3.6.1.4.1.9.9.336.0.1
The notification generated when a linkset changes to a new state. The value of cgspLinksetState indicates the new state.
ciscoGspLinkStateChange .1.3.6.1.4.1.9.9.336.0.2
The notification generated when a link changes to a new state. The value of cgspLinkState indicates the new state.
ciscoGspCongestionChange .1.3.6.1.4.1.9.9.336.0.3
The notification generated when a link changes to a new congestion level as specified by cgspLinkCongestionState object.
ciscoGspLinkRcvdUtilChange .1.3.6.1.4.1.9.9.336.0.4
The notification provide is generated when the cgspLinkUtilStateRcvd changes states.
ciscoGspLinkSentUtilChange .1.3.6.1.4.1.9.9.336.0.5
The notification provide is generated when the cgspLinkUtilStateSent changes states.
Object Identifier
ciscoGspMIB .1.3.6.1.4.1.9.9.336
The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB replaces the CISCO-ITP-SP-MIB and provide support multiple instances of a signalling point within same configuration. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 Signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. This MIB models the GSP as follows: Abbreviations: AERM - Alignment Error Rate Monitor CLLI - Common-Language Location Identification DPC - Destination Point Code GSP - Gateway Signalling Point HSL - High Speed Link (ATM based) LLSC - link set control LSAC - Signalling link activity control LSDA - Signalling data link allocation LSLA - Signalling link activation LSLD - Signalling link deactivation LSLR - Signalling link restoration LSSU - Link Status Signal Unit LSTA - Signalling terminal allocation MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NTT - The Japanese Nippon Telephone & Telegraph OPC - Originating Point Code PC - Point Code RTN - RouteTableName SCTP - Stream Transmission Protocol(RFC 2960) SIB - Status Indicator Busy SLT - Signalling Link Test SP - Signalling Point SS7 - System No. 7 (SS7) Network SUERM - Signal Unit Error Rate Monitor TCBC - Changeback control TCOC - Changeover control TCRC - Controlled rerouting control TFRC - Forced rerouting control TLAC - Link availability control TPRC - Signalling point restart control TRCC - Signalling route set congestion control TSFC - Signalling traffic flow control TSRC - Signalling routing control TTC - The Japanese Telecommunications Technology Committee
ciscoGspMIBNotifs .1.3.6.1.4.1.9.9.336.0
ciscoGspMIBObjects .1.3.6.1.4.1.9.9.336.1
ciscoGspMIBConform .1.3.6.1.4.1.9.9.336.2
cgspScalars .1.3.6.1.4.1.9.9.336.1.1
cgspProfile .1.3.6.1.4.1.9.9.336.1.2
cgspInstance .1.3.6.1.4.1.9.9.336.1.3
cgspPointCode .1.3.6.1.4.1.9.9.336.1.4
cgspLinkset .1.3.6.1.4.1.9.9.336.1.5
cgspLink .1.3.6.1.4.1.9.9.336.1.6
cgspNotificationsEnable .1.3.6.1.4.1.9.9.336.1.7
ciscoGspMIBCompliances .1.3.6.1.4.1.9.9.336.2.1
ciscoGspMIBGroups .1.3.6.1.4.1.9.9.336.2.2
Group
ciscoGspScalarsGroup .1.3.6.1.4.1.9.9.336.2.2.1
Scalars Group for Gateway Signalling Point.
ciscoGspProfileGroup .1.3.6.1.4.1.9.9.336.2.2.2
Profile Group for Gateway Signalling Point.
ciscoGspInstanceGroup .1.3.6.1.4.1.9.9.336.2.2.3
Instance of Signalling Point.
ciscoGspInstTimerGroup .1.3.6.1.4.1.9.9.336.2.2.4
Timers defined for each Instance of Signalling Point.
ciscoGspPointCodeGroup .1.3.6.1.4.1.9.9.336.2.2.5
Pointcode defined for each Instance of Signalling Point.
ciscoGspLinksetGroup .1.3.6.1.4.1.9.9.336.2.2.6
linkset objects .
ciscoGspLinksetTimerGroup .1.3.6.1.4.1.9.9.336.2.2.7
Timers defined for each Linkset.
ciscoGspLinkGroup .1.3.6.1.4.1.9.9.336.2.2.8
SP link objects.
ciscoGspLinkTimerGroup .1.3.6.1.4.1.9.9.336.2.2.9
Timers defined for each Link.
ciscoGspLinkRemoteIpGroup .1.3.6.1.4.1.9.9.336.2.2.10
Remote IP addresses for each Link.
ciscoGspLinkUtilGroup .1.3.6.1.4.1.9.9.336.2.2.11
Utilization history for each Link.
ciscoGspNotificationsEnableGroup .1.3.6.1.4.1.9.9.336.2.2.12
SP enable notification objects.
ciscoGspNotificationsGroup .1.3.6.1.4.1.9.9.336.2.2.13
SP notification objects.
ciscoGspLinkGroupRev1 .1.3.6.1.4.1.9.9.336.2.2.14
SP link objects.