CISCO-ITP-GSP2-MIB device MIB details by Cisco
CISCO-ITP-GSP2-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ITP-GSP2-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-ITP-GSP2-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-ITP-GSP2-MIB: MIB for Gateway SS7 signalling Point - -- Additional Information -- -- September 2002, John Linton, Shekhar Acharya -- -- Copyright (c) 2002-2003 by Cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- ***************************************************************** CISCO-ITP-GSP2-MIB DEFINITIONS ::= BEGIN IMPORTS cgspInstNetwork FROM CISCO-ITP-GSP-MIB CItpTcAclId, CItpTcPointCode, CItpTcXuaName FROM CISCO-ITP-TC-MIB ciscoMgmt FROM CISCO-SMI InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, TEXTUAL-CONVENTION, TimeStamp FROM SNMPv2-TC Counter32, Integer32, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI; ciscoGsp2MIB MODULE-IDENTITY LAST-UPDATED "200303030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-ss7@cisco.com" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set. " REVISION "200303030000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 332 } -- Top-level structure of the MIB ciscoGsp2MIBNotifs OBJECT IDENTIFIER ::= { ciscoGsp2MIB 0 } ciscoGsp2MIBObjects OBJECT IDENTIFIER ::= { ciscoGsp2MIB 1 } ciscoGsp2MIBConform OBJECT IDENTIFIER ::= { ciscoGsp2MIB 2 } cgsp2Events OBJECT IDENTIFIER ::= { ciscoGsp2MIBObjects 1 } cgsp2Qos OBJECT IDENTIFIER ::= { ciscoGsp2MIBObjects 2 } cgsp2LocalPeer OBJECT IDENTIFIER ::= { ciscoGsp2MIBObjects 3 } -- ************************************************************* -- * * -- * Textual Conventions * -- * * -- ************************************************************* Cgsp2TcQosClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The quality of service classification to be assigned to the IP packets used to transport the SS7 messages. Zero is a special value and is reserved to carry all traffic that does not specify a Qos or when exact match of the specified Qos is not available." SYNTAX Unsigned32 (0..7) Cgsp2EventIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value the agent flushes the event table and wraps the value back to 1. Where lower values represent older entries and higher values represent newer entries." SYNTAX Unsigned32 (1..2147483647) -- ************************************************************* -- * * -- * History * -- * * -- ************************************************************* cgsp2EventTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2EventTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to provide information about all types of events on a signalling point." ::= { cgsp2Events 1 } cgsp2EventTableEntry OBJECT-TYPE SYNTAX Cgsp2EventTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SS7 events generated and received by a specific signalling point." INDEX { cgspInstNetwork, -- shared index cgsp2EventType } ::= { cgsp2EventTable 1 } Cgsp2EventTableEntry ::= SEQUENCE { cgsp2EventType INTEGER, cgsp2EventLoggedEvents Counter32, cgsp2EventDroppedEvents Counter32, cgsp2EventMaxEntries Unsigned32, cgsp2EventMaxEntriesAllowed Unsigned32 } cgsp2EventType OBJECT-TYPE SYNTAX INTEGER { as(1), asp(2), mtp3(3), pc(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of event history as follows. 'as' - Application Service 'asp' - Application Service Process 'mtp3' - Message Transport Protocol Level 3 'pc' - Point-code " ::= { cgsp2EventTableEntry 1 } cgsp2EventLoggedEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of events that have been logged." ::= { cgsp2EventTableEntry 2 } cgsp2EventDroppedEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of events that could not be logged due to unavailable resources." ::= { cgsp2EventTableEntry 3 } cgsp2EventMaxEntries OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper limit on the number of events that the event history can contain. A value of 0 will prevent any event history from being retained. When this table is full, the oldest entry will be deleted as a new entry is added." ::= { cgsp2EventTableEntry 4 } cgsp2EventMaxEntriesAllowed OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maximum number of events that can be specified for cgsp2EventMaxEntries object." ::= { cgsp2EventTableEntry 5 } -- ************************************************************* -- * * -- * Application Service Event History * -- * * -- ************************************************************* cgsp2EventAsTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2EventAsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Application Service events generated per signalling point." ::= { cgsp2Events 2 } cgsp2EventAsTableEntry OBJECT-TYPE SYNTAX Cgsp2EventAsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is added to this table for each application service event associated with a particular application service. The table contains the latest number of events defined by the cgsp2EventMaxEntries object. Once the table is full, the oldest entry is removed and a new entry is created to accommodate the new event." INDEX { cgspInstNetwork, -- shared index cgsp2EventAsName, cgsp2EventAsIndex } ::= { cgsp2EventAsTable 1 } Cgsp2EventAsTableEntry ::= SEQUENCE { cgsp2EventAsName CItpTcXuaName, cgsp2EventAsIndex Cgsp2EventIndex, cgsp2EventAsText SnmpAdminString, cgsp2EventAsTimestamp TimeStamp } cgsp2EventAsName OBJECT-TYPE SYNTAX CItpTcXuaName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The application server name. This name has only local significance." ::= { cgsp2EventAsTableEntry 1 } cgsp2EventAsIndex OBJECT-TYPE SYNTAX Cgsp2EventIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into application service event history." ::= { cgsp2EventAsTableEntry 2 } cgsp2EventAsText OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255) ) MAX-ACCESS read-only STATUS current DESCRIPTION "A brief description of the application service event in text format." ::= { cgsp2EventAsTableEntry 3 } cgsp2EventAsTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the application service event was processed." ::= { cgsp2EventAsTableEntry 4 } -- ************************************************************* -- * * -- * Application Service Process Event History * -- * * -- ************************************************************* cgsp2EventAspTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2EventAspTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of application service process events generated per signalling point." ::= { cgsp2Events 3 } cgsp2EventAspTableEntry OBJECT-TYPE SYNTAX Cgsp2EventAspTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is added to this table for each application service process event associated with a particular application service process. The table contains the latest number of events defined by the cgsp2EventMaxEntries object. Once the table is full, the oldest entry is removed and a new entry is created to accommodate the new event." INDEX { cgspInstNetwork, -- shared index cgsp2EventAspName, cgsp2EventAspIndex } ::= { cgsp2EventAspTable 1 } Cgsp2EventAspTableEntry ::= SEQUENCE { cgsp2EventAspName CItpTcXuaName, cgsp2EventAspIndex Cgsp2EventIndex, cgsp2EventAspText SnmpAdminString, cgsp2EventAspTimestamp TimeStamp } cgsp2EventAspName OBJECT-TYPE SYNTAX CItpTcXuaName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The application server process name. This name has only local significance." ::= { cgsp2EventAspTableEntry 1 } cgsp2EventAspIndex OBJECT-TYPE SYNTAX Cgsp2EventIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into application service process event history." ::= { cgsp2EventAspTableEntry 2 } cgsp2EventAspText OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255) ) MAX-ACCESS read-only STATUS current DESCRIPTION "A brief description of the application service process event in text format." ::= { cgsp2EventAspTableEntry 3 } cgsp2EventAspTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the application service process event was received." ::= { cgsp2EventAspTableEntry 4 } -- ************************************************************* -- * * -- * Message Transport Protocol Level 3 Event History * -- * * -- ************************************************************* cgsp2EventMtp3Table OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2EventMtp3TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MTP3 events generated per signalling point." ::= { cgsp2Events 4 } cgsp2EventMtp3TableEntry OBJECT-TYPE SYNTAX Cgsp2EventMtp3TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An MTP3 event that was previously generated by this signalling point. An entry is added to this table for each SS7 event generated on the managed system. The table contains the latest number of events defined by the cgsp2EventMaxEntries object. Once the table is full, the oldest entry is removed and a new entry is created to accommodate the new event." INDEX { cgspInstNetwork, -- shared index cgsp2EventMtp3Index } ::= { cgsp2EventMtp3Table 1 } Cgsp2EventMtp3TableEntry ::= SEQUENCE { cgsp2EventMtp3Index Cgsp2EventIndex, cgsp2EventMtp3Text SnmpAdminString, cgsp2EventMtp3Timestamp TimeStamp } cgsp2EventMtp3Index OBJECT-TYPE SYNTAX Cgsp2EventIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into MTP3 event history." ::= { cgsp2EventMtp3TableEntry 1 } cgsp2EventMtp3Text OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255) ) MAX-ACCESS read-only STATUS current DESCRIPTION "A brief description of the SS7 event in text format. Each event provides information of state transitions specific to the MTP3 protocol." ::= { cgsp2EventMtp3TableEntry 2 } cgsp2EventMtp3Timestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the event was received by MTP3 layer." ::= { cgsp2EventMtp3TableEntry 3 } -- ************************************************************* -- * * -- * Point-code Event History * -- * * -- ************************************************************* cgsp2EventPcTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2EventPcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of point-code events generated per signalling point." ::= { cgsp2Events 5} cgsp2EventPcTableEntry OBJECT-TYPE SYNTAX Cgsp2EventPcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is added to this table for each point-code event. The table contains the latest number of events defined by the cgsp2EventMaxEntries object. Once the table is full, the oldest entry is removed and a new entry is created to accommodate the new event." INDEX { cgspInstNetwork, -- shared index cgsp2EventPc, cgsp2EventPcIndex } ::= { cgsp2EventPcTable 1 } Cgsp2EventPcTableEntry ::= SEQUENCE { cgsp2EventPc CItpTcPointCode, cgsp2EventPcIndex Cgsp2EventIndex, cgsp2EventPcText SnmpAdminString, cgsp2EventPcTimestamp TimeStamp } cgsp2EventPc OBJECT-TYPE SYNTAX CItpTcPointCode MAX-ACCESS not-accessible STATUS current DESCRIPTION "The point code number." ::= { cgsp2EventPcTableEntry 1 } cgsp2EventPcIndex OBJECT-TYPE SYNTAX Cgsp2EventIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into point-code event history." ::= { cgsp2EventPcTableEntry 2 } cgsp2EventPcText OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255) ) MAX-ACCESS read-only STATUS current DESCRIPTION "A brief description of the point-code event in text format." ::= { cgsp2EventPcTableEntry 3 } cgsp2EventPcTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the point-code event was received." ::= { cgsp2EventPcTableEntry 4 } -- ************************************************************* -- * * -- * Quality of Service * -- * * -- ************************************************************* cgsp2QosTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2QosTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information related to the defining Quality of Service to transport SS7 packets using SCTP/IP. Entries are added to this table via cgsp2QosRowStatus in accordance with the RowStatusconvention." ::= { cgsp2Qos 1 } cgsp2QosTableEntry OBJECT-TYPE SYNTAX Cgsp2QosTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry define information relate to a Quality of Service class as needed to transport SS7 packets using SCTP/IP." INDEX { cgspInstNetwork, -- shared index cgsp2QosClass } ::= { cgsp2QosTable 1 } Cgsp2QosTableEntry ::= SEQUENCE { cgsp2QosClass Cgsp2TcQosClass, cgsp2QosType INTEGER, cgsp2QosPrecedenceValue Integer32, cgsp2QosIpDscp Integer32, cgsp2QosAclId CItpTcAclId, cgsp2QosRowStatus RowStatus } cgsp2QosClass OBJECT-TYPE SYNTAX Cgsp2TcQosClass MAX-ACCESS not-accessible STATUS current DESCRIPTION "The quality of service class that can be defined to transport SS7 Packets using SCTP/IP." ::= { cgsp2QosTableEntry 1 } cgsp2QosType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), ipDscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated list of QoS type that can be defined. A value ipPrecedence suggests that IP Type of Service (TOS) is based on cgsp2QosPrecedenceValue. A value ipDscp suggests that IP Type of Service (TOS) is based on cgsp2QosIpDscp." ::= { cgsp2QosTableEntry 2 } cgsp2QosPrecedenceValue OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "A value to assign to the IP TOS bits in the IP datagram that carries one or more SS7 packets. The IP Precedence value is specified if cgsp2QosType is ipPrecedence, otherwise it is -1." ::= { cgsp2QosTableEntry 3 } cgsp2QosIpDscp OBJECT-TYPE SYNTAX Integer32 (-1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "DiffServ CodePoint (DSCP) value to assign to the IP TOS bits in the IP datagram that carries one or more SS7 packets. DSCP provides scalable mechanisms to classify packets into groups or classes that have similar QoS requirements and then gives these groups the required treatment at every hop in the network. The DSCP value is specified if cgsp2QosType is ipDscp, otherwise it is -1." REFERENCE "Differentiated Services is described and defined in the RFCs: 2474, 2475, 2597, and 2598." ::= { cgsp2QosTableEntry 4 } cgsp2QosAclId OBJECT-TYPE SYNTAX CItpTcAclId MAX-ACCESS read-create STATUS current DESCRIPTION "ITP Access lists can be used to use information specific to SS7 packets to assign an Qos class. A value of zero indicates that no access control list is present." DEFVAL { 0 } ::= { cgsp2QosTableEntry 5 } cgsp2QosRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used by a management station to create or delete the row entry in cgsp2QosTable following the RowStatus textual convention." ::= { cgsp2QosTableEntry 6 } -- ************************************************************* -- * * -- * Local Peer Table * -- * * -- ************************************************************* cgsp2LocalPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2LocalPeerTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A local-peer table used establish SCTP associations. The port will be used to receive and sent requests to establish associations. Entries are added to this table via cgsp2LocalPeerRowStatus in accordance with the RowStatus convention." ::= { cgsp2LocalPeer 1 } cgsp2LocalPeerTableEntry OBJECT-TYPE SYNTAX Cgsp2LocalPeerTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of attributes of the local-peer." INDEX { cgsp2LocalPeerPort } ::= { cgsp2LocalPeerTable 1 } Cgsp2LocalPeerTableEntry ::= SEQUENCE { cgsp2LocalPeerPort InetPortNumber, cgsp2LocalPeerSlotNumber Integer32, cgsp2LocalPeerRowStatus RowStatus } cgsp2LocalPeerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local SCTP port for this local-peer. The value zero is not allowed." ::= { cgsp2LocalPeerTableEntry 1 } cgsp2LocalPeerSlotNumber OBJECT-TYPE SYNTAX Integer32 (-1..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is used to specify to which slot the local-peer will be offloaded. A value of negative one indicates the local-peer is not offloaded." DEFVAL { -1 } ::= { cgsp2LocalPeerTableEntry 2 } cgsp2LocalPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used by a management station to create or delete a row entry in cgsp2LocalPeerTable following the RowStatus textual convention." ::= { cgsp2LocalPeerTableEntry 3 } -- ************************************************************* -- * * -- * Local Peer IP Address Table * -- * * -- ************************************************************* cgsp2LpIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF Cgsp2LpIpAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Local IP addresses group together to form the local-peer used to establish SCTP associations. For a given local-peer, there can be multiple local IP addresses which are used for the multi-homing feature of the SCTP associations. This table lists out the configured local IP addresses. Entries are added to this table via cgsp2LocalPeerRowStatus in accordance with the RowStatus convention." ::= { cgsp2LocalPeer 2 } cgsp2LpIpAddrTableEntry OBJECT-TYPE SYNTAX Cgsp2LpIpAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of attributes of the Local IP addresses for the local-peer." INDEX { cgsp2LocalPeerPort, -- shared index cgsp2LpIpAddressNumber } ::= { cgsp2LpIpAddrTable 1 } Cgsp2LpIpAddrTableEntry ::= SEQUENCE { cgsp2LpIpAddressNumber Unsigned32, cgsp2LpIpAddressType InetAddressType, cgsp2LpIpAddress InetAddress, cgsp2LpIpAddressRowStatus RowStatus } cgsp2LpIpAddressNumber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the index for the instance's IP address." ::= { cgsp2LpIpAddrTableEntry 1 } cgsp2LpIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the type of the local IP address used to create the association." ::= { cgsp2LpIpAddrTableEntry 2 } cgsp2LpIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the local IP address used to create association associations." ::= { cgsp2LpIpAddrTableEntry 3 } cgsp2LpIpAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used by a management station to create or delete the row entry in cgsp2LpIpAddrTable following the RowStatus textual convention." ::= { cgsp2LpIpAddrTableEntry 4 } -- ************************************************************* -- * * -- * Notifications * -- * * -- ************************************************************* -- ************************************************************* -- * * -- * Conformance Information * -- * * -- ************************************************************* ciscoGsp2MIBCompliances OBJECT IDENTIFIER ::= { ciscoGsp2MIBConform 1 } ciscoGsp2MIBGroups OBJECT IDENTIFIER ::= { ciscoGsp2MIBConform 2 } -- ******************************************************************** -- Compliance Statements -- ******************************************************************** ciscoGsp2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB" MODULE -- this module MANDATORY-GROUPS { ciscoGsp2EventsGroup, ciscoGsp2QosGroup, ciscoGsp2LocalPeerGroup } OBJECT cgsp2EventMaxEntries MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cgsp2QosType MIN-ACCESS read-only DESCRIPTION "Create/Write access is not required." OBJECT cgsp2QosPrecedenceValue MIN-ACCESS read-only DESCRIPTION "Create/Write access is not required." OBJECT cgsp2QosIpDscp MIN-ACCESS read-only DESCRIPTION "Create/Write access is not required." OBJECT cgsp2QosAclId MIN-ACCESS read-only DESCRIPTION "Create/Write access is not required." OBJECT cgsp2QosRowStatus MIN-ACCESS read-only DESCRIPTION "Create/Write access is not required." ::= { ciscoGsp2MIBCompliances 1 } -- **************************************************************** -- Units of Conformance -- **************************************************************** ciscoGsp2EventsGroup OBJECT-GROUP OBJECTS { cgsp2EventLoggedEvents, cgsp2EventDroppedEvents, cgsp2EventMaxEntries, cgsp2EventMaxEntriesAllowed, cgsp2EventMtp3Text, cgsp2EventMtp3Timestamp, cgsp2EventAsText, cgsp2EventAsTimestamp, cgsp2EventAspText, cgsp2EventAspTimestamp, cgsp2EventPcText, cgsp2EventPcTimestamp } STATUS current DESCRIPTION "SS7 Event objects." ::= { ciscoGsp2MIBGroups 1 } ciscoGsp2QosGroup OBJECT-GROUP OBJECTS { cgsp2QosType, cgsp2QosPrecedenceValue, cgsp2QosIpDscp, cgsp2QosAclId, cgsp2QosRowStatus } STATUS current DESCRIPTION "SS7 Quality of Service objects." ::= { ciscoGsp2MIBGroups 2 } ciscoGsp2LocalPeerGroup OBJECT-GROUP OBJECTS { cgsp2LocalPeerSlotNumber, cgsp2LocalPeerRowStatus, cgsp2LpIpAddressType, cgsp2LpIpAddress, cgsp2LpIpAddressRowStatus } STATUS current DESCRIPTION "SS7 Local Peer objects." ::= { ciscoGsp2MIBGroups 3 } END