ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-LOCAL-DIRECTOR-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file CISCO-LOCAL-DIRECTOR-MIB and use it to monitor vendor specific OID's.

CISCO-LOCAL-DIRECTOR-MIB file content

Object view of CISCO-LOCAL-DIRECTOR-MIB:

Scalar Object
cldVirtualTableEntry .1.3.6.1.4.1.9.9.99.1.1.1.1
A LocalDirector Virtual Table entry. Entries are added to this table via the 'virtual' command on the command line interface.
cldRealTableEntry .1.3.6.1.4.1.9.9.99.1.2.1.1
A LocalDirector Real Table entry. Entries are added via the 'real' command on the command line interface.
cldeVirtualTableEntry .1.3.6.1.4.1.9.9.99.1.1.2.1
A LocalDirector Virtual Table entry. Entries are added to this table via the 'virtual' command on the command line interface.
cldeRealTableEntry .1.3.6.1.4.1.9.9.99.1.2.2.1
A LocalDirector Real Table entry. Entries are added via the 'real' command on the command line interface.
cldexVirtualTableEntry .1.3.6.1.4.1.9.9.99.1.1.3.1
A LocalDirector Virtual Table entry. Entries are added to this table via the 'virtual' command on the command line interface.
cldFailoverEnabled .1.3.6.1.4.1.9.9.99.1.3.1
Is failover mechanism enabled.
cldFailoverCableStatus .1.3.6.1.4.1.9.9.99.1.3.2
Status of failover serial cable.
cldFailoverUnitType .1.3.6.1.4.1.9.9.99.1.3.3
The failover unit type, which is determined by Failover serial cable; primary or secondary.
cldFailoverUnitStatus .1.3.6.1.4.1.9.9.99.1.3.4
The unit's failover activity; active or standby.
cldFailoverActiveTimeStamp .1.3.6.1.4.1.9.9.99.1.3.5
The value of sysUpTime when unit went active.
Tabular Object
cldVirtualIpAddress .1.3.6.1.4.1.9.9.99.1.1.1.1.1
The IP address of the virtual machine.
cldVirtualPort .1.3.6.1.4.1.9.9.99.1.1.1.1.2
The TCP port of the virtual machine (default is 0, which is all ports).
cldVirtualBindID .1.3.6.1.4.1.9.9.99.1.1.1.1.3
The Bind ID of the virtual machine (default is 0, which is for all clients.
cldVirtualState .1.3.6.1.4.1.9.9.99.1.1.1.1.4
The service state of the virtual machine.
cldVirtualTotalConnections .1.3.6.1.4.1.9.9.99.1.1.1.1.5
The total number of connections to/from the virtual machine since reboot.
cldVirtualTotalPackets .1.3.6.1.4.1.9.9.99.1.1.1.1.6
The total number of packets to/from the virtual machine since reboot.
cldVirtualTotalBytes .1.3.6.1.4.1.9.9.99.1.1.1.1.7
The total number of bytes to/from the virtual machine since reboot.
cldVirtualWeight .1.3.6.1.4.1.9.9.99.1.1.1.1.8
The weight reflects the availability of a virtual machine, which is the total weights/availability of all real machines bound the virtual machine.
cldRealIpAddress .1.3.6.1.4.1.9.9.99.1.2.1.1.1
The IP address of the real machine.
cldRealPort .1.3.6.1.4.1.9.9.99.1.2.1.1.2
The TCP port of the real machine (default is 0, which is all ports).
cldRealState .1.3.6.1.4.1.9.9.99.1.2.1.1.3
The service state of the real machine (defaul is 0, which is all clients.
cldRealTotalConnections .1.3.6.1.4.1.9.9.99.1.2.1.1.4
The total number of connections to this machine since reboot.
cldRealTotalPackets .1.3.6.1.4.1.9.9.99.1.2.1.1.5
The total number of packets to/from the real machine since reboot.
cldRealTotalBytes .1.3.6.1.4.1.9.9.99.1.2.1.1.6
The total number of bytes to/from the real machine since reboot.
cldRealWeight .1.3.6.1.4.1.9.9.99.1.2.1.1.7
The weight for the real machine.
cldeVirtualIpAddress .1.3.6.1.4.1.9.9.99.1.1.2.1.1
The IP address of the virtual machine.
cldeVirtualPort .1.3.6.1.4.1.9.9.99.1.1.2.1.2
The TCP port of the virtual machine (default is 0, which is all ports).
cldeVirtualBindID .1.3.6.1.4.1.9.9.99.1.1.2.1.3
The Bind ID of the virtual machine (default is 0, which is for all clients.
cldeVirtualProtocol .1.3.6.1.4.1.9.9.99.1.1.2.1.4
The TCP/UDP protocol field value used in sending packets to this Virtual Server.
cldeVirtualState .1.3.6.1.4.1.9.9.99.1.1.2.1.5
The service state of the virtual machine.
cldeVirtualTotalConnections .1.3.6.1.4.1.9.9.99.1.1.2.1.6
The total number of connections to/from the virtual machine since reboot.
cldeVirtualTotalPackets .1.3.6.1.4.1.9.9.99.1.1.2.1.7
The total number of packets to/from the virtual machine since reboot.
cldeVirtualTotalBytes .1.3.6.1.4.1.9.9.99.1.1.2.1.8
The total number of bytes to/from the virtual machine since reboot.
cldeVirtualWeight .1.3.6.1.4.1.9.9.99.1.1.2.1.9
The weight reflects the availability of a virtual machine, which is the total weights/availability of all real machines bound the virtual machine.
cldeRealIpAddress .1.3.6.1.4.1.9.9.99.1.2.2.1.1
The IP address of the real machine.
cldeRealPort .1.3.6.1.4.1.9.9.99.1.2.2.1.2
The TCP port of the real machine (default is 0, which is all ports).
cldeRealBindID .1.3.6.1.4.1.9.9.99.1.2.2.1.3
The Bind ID of the Real Server.
cldeRealProtocol .1.3.6.1.4.1.9.9.99.1.2.2.1.4
The TCP/UDP protocol field value used in sending packets to this Real Server.
cldeRealState .1.3.6.1.4.1.9.9.99.1.2.2.1.5
The service state of the real machine (defaul is 0, which is all clients.
cldeRealTotalConnections .1.3.6.1.4.1.9.9.99.1.2.2.1.6
The total number of connections to this machine since reboot.
cldeRealTotalPackets .1.3.6.1.4.1.9.9.99.1.2.2.1.7
The total number of packets to/from the real machine since reboot.
cldeRealTotalBytes .1.3.6.1.4.1.9.9.99.1.2.2.1.8
The total number of bytes to/from the real machine since reboot.
cldeRealWeight .1.3.6.1.4.1.9.9.99.1.2.2.1.9
The weight for the real machine.
cldexVirtualIpAddress .1.3.6.1.4.1.9.9.99.1.1.3.1.1
The IP address of the virtual machine.
cldexVirtualPort .1.3.6.1.4.1.9.9.99.1.1.3.1.2
The TCP port of the virtual machine (default is 0, which is all ports).
cldexVirtualBindID .1.3.6.1.4.1.9.9.99.1.1.3.1.3
The Bind ID of the virtual machine (default is 0, which is for all clients.
cldexVirtualProtocol .1.3.6.1.4.1.9.9.99.1.1.3.1.4
The TCP/UDP protocol field value used in sending packets to this Virtual Server.
cldexVirtualRule .1.3.6.1.4.1.9.9.99.1.1.3.1.5
The administratively assigned content rule name associated with this Virtual Server.
cldexVirtualState .1.3.6.1.4.1.9.9.99.1.1.3.1.6
The service state of the virtual machine.
cldexVirtualTotalConnections .1.3.6.1.4.1.9.9.99.1.1.3.1.7
The total number of connections to/from the virtual machine since reboot.
cldexVirtualTotalPackets .1.3.6.1.4.1.9.9.99.1.1.3.1.8
The total number of packets to/from the virtual machine since reboot.
cldexVirtualTotalBytes .1.3.6.1.4.1.9.9.99.1.1.3.1.9
The total number of bytes to/from the virtual machine since reboot.
cldexVirtualWeight .1.3.6.1.4.1.9.9.99.1.1.3.1.10
The weight reflects the availability of a virtual machine, which is the total weights/availability of all real machines bound the virtual machine.
Table
cldVirtualTable .1.3.6.1.4.1.9.9.99.1.1.1
Information about all Virtual machines that exist on LocalDirector.
cldRealTable .1.3.6.1.4.1.9.9.99.1.2.1
Information about all Real machines that exist on LocalDirector.
cldeVirtualTable .1.3.6.1.4.1.9.9.99.1.1.2
Information about all Virtual machines that exist on LocalDirector.
cldeRealTable .1.3.6.1.4.1.9.9.99.1.2.2
Information about all Real machines that exist on LocalDirector.
cldexVirtualTable .1.3.6.1.4.1.9.9.99.1.1.3
Information about all Virtual machines that exist on LocalDirector.
Trap
ciscoLocalDirectorVirtualStateChange .1.3.6.1.4.1.9.9.99.2.0.1
When a Virtual machine changes state, a notification is sent.
ciscoLocalDirectorRealStateChange .1.3.6.1.4.1.9.9.99.2.0.2
When a Real machine changes state, a notification is sent.
ciscoLocalDirectorFailoverEnableChange .1.3.6.1.4.1.9.9.99.2.0.3
Failover is turned on/off.
ciscoLocalDirectorFailoverCableChange .1.3.6.1.4.1.9.9.99.2.0.4
Failover's serial cable has a status change.
ciscoLocalDirectorFailoverUnitStatus .1.3.6.1.4.1.9.9.99.2.0.5
Failover event occurs.
ciscoLocalDirectorEVirtualStateChange .1.3.6.1.4.1.9.9.99.2.0.6
When a Virtual machine changes state, a notification is sent.
ciscoLocalDirectorERealStateChange .1.3.6.1.4.1.9.9.99.2.0.7
When a Real machine changes state, a notification is sent.
ciscoLocalDirectorExVirtualStateChange .1.3.6.1.4.1.9.9.99.2.0.8
When a Virtual machine changes state, a notification is sent.
Object Identifier
ciscoLocalDirectorMIB .1.3.6.1.4.1.9.9.99
The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balancing TCP traffic at an Internet site. To implement load balancing, an IP address (and optionally a port and a 'bind ID') is chosen to be the publically accessible 'virtual machine'. Then a number of actual Internet servers are 'bound' to this virtual machine. The servers are called 'real machines'. The relationships between virtual and real machines can be one to many, many to one, or many to many. More detailed information about the LocalDirector is available in the 'Cisco LocalDirector Installation and Configuration Guide', available online at www.cisco.com.
ciscoLocalDirectorMIBObjects .1.3.6.1.4.1.9.9.99.1
cldVirtualMachine .1.3.6.1.4.1.9.9.99.1.1
cldRealMachine .1.3.6.1.4.1.9.9.99.1.2
cldFailover .1.3.6.1.4.1.9.9.99.1.3
ciscoLocalDirectorMIBNotificationPrefix .1.3.6.1.4.1.9.9.99.2
ciscoLocalDirectorMIBNotifications .1.3.6.1.4.1.9.9.99.2.0
ciscoLocalDirectorMIBConformance .1.3.6.1.4.1.9.9.99.3
ciscoLocalDirectorMIBCompliances .1.3.6.1.4.1.9.9.99.3.1
ciscoLocalDirectorMIBGroups .1.3.6.1.4.1.9.9.99.3.2
Group
ciscoLocalDirectorFailoverGroup .1.3.6.1.4.1.9.9.99.3.2.2
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorMIBGroup .1.3.6.1.4.1.9.9.99.3.2.1
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorEMIBGroup .1.3.6.1.4.1.9.9.99.3.2.3
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorNotificationGroup .1.3.6.1.4.1.9.9.99.3.2.4
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorNotificationGroupRev1 .1.3.6.1.4.1.9.9.99.3.2.5
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorEMIBGroupRev1 .1.3.6.1.4.1.9.9.99.3.2.6
A collection of objects providing the LocalDirector MIB capability.
ciscoLocalDirectorNotificationGroupRev2 .1.3.6.1.4.1.9.9.99.3.2.7
A collection of objects providing the LocalDirector MIB capability.