| cospfRFC1583Compatibility |
.1.3.6.1.4.1.9.10.99.1.1 |
|
Indicates metrics used to choose among multiple AS-
external-LSAs. When cospfRFC1583Compatibility is set to
enabled, only cost will be used when choosing among
multiple AS-external-LSAs advertising the same
destination. When cospfRFC1583Compatibility is set to
disabled, preference will be driven first by type of
path using cost only to break ties.
|
| cospfOpaqueLsaSupport |
.1.3.6.1.4.1.9.10.99.1.2 |
|
The router's support for Opaque LSA types.
|
| cospfTrafficEngineeringSupport |
.1.3.6.1.4.1.9.10.99.1.3 |
|
The router's support for OSPF traffic engineering.
|
| cospfOpaqueASLsaCount |
.1.3.6.1.4.1.9.10.99.1.4 |
|
The total number of Opaque AS link-state
advertisements in the link state database.
|
| cospfOpaqueASLsaCksumSum |
.1.3.6.1.4.1.9.10.99.1.5 |
|
The 32-bit unsigned sum of the Opaque AS
link-state advertisements' LS checksums contained
link state database.
|
| cospfAreaEntry |
.1.3.6.1.4.1.9.10.99.2.1 |
|
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
|
| cospfLsdbEntry |
.1.3.6.1.4.1.9.10.99.3.1 |
|
A single Link State Advertisement.
|
| cospfIfEntry |
.1.3.6.1.4.1.9.10.99.4.1 |
|
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
|
| cospfVirtIfEntry |
.1.3.6.1.4.1.9.10.99.5.1 |
|
Information about a single Virtual Interface.
|
| cospfShamLinkEntry |
.1.3.6.1.4.1.9.10.99.6.1 |
|
Information about a single sham link
|
| cospfLocalLsdbEntry |
.1.3.6.1.4.1.9.10.99.7.1 |
|
A single Link State Advertisement.
|
| cospfVirtLocalLsdbEntry |
.1.3.6.1.4.1.9.10.99.8.1 |
|
A single Link State Advertisement.
|
| cospfOpaqueAreaLsaCount |
.1.3.6.1.4.1.9.10.99.2.1.1 |
|
The total number of Opaque Area and AS link-state
advertisements in the link state database of this
area.
|
| cospfOpaqueAreaLsaCksumSum |
.1.3.6.1.4.1.9.10.99.2.1.2 |
|
The 32-bit unsigned sum of the Opaque Area and AS
link-state advertisements' LS checksums contained
link state database of this area. The sum can be
used to determine if there has been a change in the
link state database for Opaque Area and AS link-state
advertisements
|
| cospfAreaNssaTranslatorRole |
.1.3.6.1.4.1.9.10.99.2.1.3 |
|
Indicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs.
|
| cospfAreaNssaTranslatorState |
.1.3.6.1.4.1.9.10.99.2.1.4 |
|
Indicates if and how an NSSA Border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object set to enabled, the NSSA Border
router's cospfAreaNssaExtTranslatorRole has been set to
always. When this object is set to elected, a candidate
NSSA Border router is Translating type-7 LSAs into type-5.
When this object is set to disabled, a candidate NSSA
Border router is NOT translating type-7 LSAs into type-5.
|
| cospfAreaNssaTranslatorEvents |
.1.3.6.1.4.1.9.10.99.2.1.5 |
|
Indicates the number of Translator State changes
that have occurred since the last boot-up.
|
| cospfLsdbType |
.1.3.6.1.4.1.9.10.99.3.1.1 |
|
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
|
| cospfLsdbSequence |
.1.3.6.1.4.1.9.10.99.3.1.2 |
|
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.
|
| cospfLsdbAge |
.1.3.6.1.4.1.9.10.99.3.1.3 |
|
This field is the age of the link state adver-
tisement in seconds.
|
| cospfLsdbChecksum |
.1.3.6.1.4.1.9.10.99.3.1.4 |
|
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.
|
| cospfLsdbAdvertisement |
.1.3.6.1.4.1.9.10.99.3.1.5 |
|
The entire Link State Advertisement, including
its header.
|
| cospfIfLsaCount |
.1.3.6.1.4.1.9.10.99.4.1.1 |
|
The total number of link-local link state advertisements
in this interface's link-local link state database.
|
| cospfIfLsaCksumSum |
.1.3.6.1.4.1.9.10.99.4.1.2 |
|
The 32-bit unsigned sum of the link-state ad-
vertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
been a change in the interface's link state data-
base, and to compare the interface link-state database of
routers attached to the same subnet.
|
| cospfVirtIfLsaCount |
.1.3.6.1.4.1.9.10.99.5.1.1 |
|
The total number of link-local link state advertisements
in this virtual interface's link-local link state database.
|
| cospfVirtIfLsaCksumSum |
.1.3.6.1.4.1.9.10.99.5.1.2 |
|
The 32-bit unsigned sum of the link-state ad-
vertisements' LS checksums contained in this
virtual interface's link-local link state database.
The sum can be used to determine if there has
been a change in the virtual interface's link state data-
base, and to compare the virtual interface link-state
database of the virtual neighbors.
|
| cospfShamLinkAreaId |
.1.3.6.1.4.1.9.10.99.6.1.1 |
|
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0
|
| cospfShamLinkLocalIpAddress |
.1.3.6.1.4.1.9.10.99.6.1.2 |
|
The Local IP address of the sham link.
|
| cospfShamLinkNeighborId |
.1.3.6.1.4.1.9.10.99.6.1.3 |
|
The Router ID of the other end router of the sham
link.
|
| cospfShamLinkRetransInterval |
.1.3.6.1.4.1.9.10.99.6.1.4 |
|
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this link. This value is also
used when retransmitting database description
and link-state request packets. This value
should be well over the expected round trip
time.
|
| cospfShamLinkHelloInterval |
.1.3.6.1.4.1.9.10.99.6.1.5 |
|
The length of time, in seconds, between the
Hello packets that the router sends on the sham
link.
|
| cospfShamLinkRtrDeadInterval |
.1.3.6.1.4.1.9.10.99.6.1.6 |
|
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval.
|
| cospfShamLinkState |
.1.3.6.1.4.1.9.10.99.6.1.7 |
|
OSPF sham link states.
|
| cospfShamLinkEvents |
.1.3.6.1.4.1.9.10.99.6.1.8 |
|
The number of state changes or error events on
this sham link
|
| cospfShamLinkMetric |
.1.3.6.1.4.1.9.10.99.6.1.9 |
|
The Metric to be advertised.
|
| cospfLocalLsdbIpAddress |
.1.3.6.1.4.1.9.10.99.7.1.1 |
|
The IP Address of the interface from
which the LSA was received if the interface is
numbered.
|
| cospfLocalLsdbAddressLessIf |
.1.3.6.1.4.1.9.10.99.7.1.2 |
|
The Interface Index of the interface from
which the LSA was received if the interface is
unnumbered.
|
| cospfLocalLsdbType |
.1.3.6.1.4.1.9.10.99.7.1.3 |
|
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
|
| cospfLocalLsdbLsid |
.1.3.6.1.4.1.9.10.99.7.1.4 |
|
The Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.
|
| cospfLocalLsdbRouterId |
.1.3.6.1.4.1.9.10.99.7.1.5 |
|
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
|
| cospfLocalLsdbSequence |
.1.3.6.1.4.1.9.10.99.7.1.6 |
|
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.
|
| cospfLocalLsdbAge |
.1.3.6.1.4.1.9.10.99.7.1.7 |
|
This field is the age of the link state adver-
tisement in seconds.
|
| cospfLocalLsdbChecksum |
.1.3.6.1.4.1.9.10.99.7.1.8 |
|
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.
|
| cospfLocalLsdbAdvertisement |
.1.3.6.1.4.1.9.10.99.7.1.9 |
|
The entire Link State Advertisement, including
its header.
|
| cospfVirtLocalLsdbTransitArea |
.1.3.6.1.4.1.9.10.99.8.1.1 |
|
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0
|
| cospfVirtLocalLsdbNeighbor |
.1.3.6.1.4.1.9.10.99.8.1.2 |
|
The Router ID of the Virtual Neighbor.
|
| cospfVirtLocalLsdbType |
.1.3.6.1.4.1.9.10.99.8.1.3 |
|
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
|
| cospfVirtLocalLsdbLsid |
.1.3.6.1.4.1.9.10.99.8.1.4 |
|
The Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.
|
| cospfVirtLocalLsdbRouterId |
.1.3.6.1.4.1.9.10.99.8.1.5 |
|
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
|
| cospfVirtLocalLsdbSequence |
.1.3.6.1.4.1.9.10.99.8.1.6 |
|
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.
|
| cospfVirtLocalLsdbAge |
.1.3.6.1.4.1.9.10.99.8.1.7 |
|
This field is the age of the link state adver-
tisement in seconds.
|
| cospfVirtLocalLsdbChecksum |
.1.3.6.1.4.1.9.10.99.8.1.8 |
|
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.
|
| cospfVirtLocalLsdbAdvertisement |
.1.3.6.1.4.1.9.10.99.8.1.9 |
|
The entire Link State Advertisement, including
its header.
|
