CISCO-QLLC01-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CISCO-QLLC01-MIB and use it to monitor vendor specific OID's.

CISCO-QLLC01-MIB file content

Object view of CISCO-QLLC01-MIB:

Scalar Object
qllcLSAdminEntry	.1.3.6.1.4.1.9.10.6.1.1.1
Configured parameter values for a specific qllc.
qllcLSOperEntry	.1.3.6.1.4.1.9.10.6.1.2.1
Parameter values for a specific qllc connection.
qllcLSStatsEntry	.1.3.6.1.4.1.9.10.6.1.3.1
Link station statistics.
Tabular Object
qllcLSAdminIfIndex	.1.3.6.1.4.1.9.10.6.1.1.1.1
Interface Index value for the qllc connection.
qllcLSAdminLciVcIndex	.1.3.6.1.4.1.9.10.6.1.1.1.2
The virtual circuit number for the logical channel identifier or PVC number depending on the type of circuit on this interface.
qllcLSAdminCircuitType	.1.3.6.1.4.1.9.10.6.1.1.1.3
The circuit type on this interface.
qllcLSAdminRole	.1.3.6.1.4.1.9.10.6.1.1.1.4
The role that the QLLC link station shall assume.
qllcLSAdminX25Add	.1.3.6.1.4.1.9.10.6.1.1.1.5
The X.25 address associated with the qllc connection.
qllcLSAdminModulo	.1.3.6.1.4.1.9.10.6.1.1.1.6
The modulus for QLLC link station. It determines the size of the rotating ACK window and can take values of 8 and 128.
qllcLSAdminLgX25	.1.3.6.1.4.1.9.10.6.1.1.1.7
The largest QLLC packet allowed to go out on the QLLC/X.25 side.
qllcLSOperIfIndex	.1.3.6.1.4.1.9.10.6.1.2.1.1
Interface Index value for the qllc connection.
qllcLSOperLciVcIndex	.1.3.6.1.4.1.9.10.6.1.2.1.2
The virtual circuit number for the logical channel identifier on this interface.
qllcLSOperCircuitType	.1.3.6.1.4.1.9.10.6.1.2.1.3
The circuit type on this interface.
qllcLSOperRole	.1.3.6.1.4.1.9.10.6.1.2.1.4
The role the QLLC link station.
qllcLSOperX25Add	.1.3.6.1.4.1.9.10.6.1.2.1.5
The remote X.25 address associated with the qllc connection.
qllcLSOperModulo	.1.3.6.1.4.1.9.10.6.1.2.1.6
The modulus for QLLC link station. It determines the size of the rotating ACK window and can take values of 8 and 128.
qllcLSOperState	.1.3.6.1.4.1.9.10.6.1.2.1.7
The state of a particular QLLC connection. Inop, closed, opening, closing, recovery and opened are states defined in the IBM document SC30-3409-1 The X.25 1984/1988 DTE/DCE and DTE/DTE Interface Architecture Reference.
qllcLSOperLgX25	.1.3.6.1.4.1.9.10.6.1.2.1.8
The largest QLLC packet allowed to go out on the QLLC/X.25 side.
qllcLSStatsIfIndex	.1.3.6.1.4.1.9.10.6.1.3.1.1
Interface Index value for the qllc connection.
qllcLSStatsLciVcIndex	.1.3.6.1.4.1.9.10.6.1.3.1.2
The virtual circuit number for the logical channel identifier on this interface.
qllcLSStatsXidIn	.1.3.6.1.4.1.9.10.6.1.3.1.3
The number of XIDs received from the LS on this VC.
qllcLSStatsXidOut	.1.3.6.1.4.1.9.10.6.1.3.1.4
The number of XIDs sent to the LS on this VC.
qllcLSStatsTestIn	.1.3.6.1.4.1.9.10.6.1.3.1.5
The number of TEST packets received from the LS on this VC.
qllcLSStatsTestOut	.1.3.6.1.4.1.9.10.6.1.3.1.6
The number of TEST packets sent to the LS from this VC.
qllcLSStatsQuenchOff	.1.3.6.1.4.1.9.10.6.1.3.1.7
The number of times the connection Quenched off for this connection.
qllcLSStatsQuenchOn	.1.3.6.1.4.1.9.10.6.1.3.1.8
The number of times the connection Quenched on for this connection.
qllcLSStatsInPaks	.1.3.6.1.4.1.9.10.6.1.3.1.9
The total number of information packets received on this interfaces.
qllcLSStatsOutPaks	.1.3.6.1.4.1.9.10.6.1.3.1.10
The total number of information packets sent on this interfaces.
qllcLSStatsInBytes	.1.3.6.1.4.1.9.10.6.1.3.1.11
The total number of bytes in the information packets received on this connection.
qllcLSStatsOutBytes	.1.3.6.1.4.1.9.10.6.1.3.1.12
The total number of bytes in the information packets sent on this connection.
qllcLSStatsNumRcvQsms	.1.3.6.1.4.1.9.10.6.1.3.1.13
The number of QSMs received on this connection.
qllcLSStatsNumSndQsms	.1.3.6.1.4.1.9.10.6.1.3.1.14
The number of QSMs sent on this connection.
qllcLSStatsNumRcvDiscs	.1.3.6.1.4.1.9.10.6.1.3.1.15
The number of DISCs received on this connection.
qllcLSStatsNumSndDiscs	.1.3.6.1.4.1.9.10.6.1.3.1.16
The number of DISCs sent on this connection.
qllcLSStatsNumRcvDms	.1.3.6.1.4.1.9.10.6.1.3.1.17
The number of DMs received on this connection.
qllcLSStatsNumSndDms	.1.3.6.1.4.1.9.10.6.1.3.1.18
The number of DMs sent on this connection.
qllcLSStatsNumRcvFrmrs	.1.3.6.1.4.1.9.10.6.1.3.1.19
The number of FRMRs received on this connection.
qllcLSStatsNumSndFrmrs	.1.3.6.1.4.1.9.10.6.1.3.1.20
The number of FRMRs sent on this connection.
qllcLSStatsNumDrops	.1.3.6.1.4.1.9.10.6.1.3.1.21
The number of packets dropped due to buffer allocation or other internal problems.
qllcLSStatsNumErrs	.1.3.6.1.4.1.9.10.6.1.3.1.22
The number of HDLC protocol errors detected.
Table
qllcLSAdminTable	.1.3.6.1.4.1.9.10.6.1.1
This table contains objects that can be changed for each qllc entry. Changing one of these parameters will take effect in the operating LS immediately. Each qllc connection will have an entry in this table.
qllcLSOperTable	.1.3.6.1.4.1.9.10.6.1.2
This table contains an entry for each qllc connection.
qllcLSStatsTable	.1.3.6.1.4.1.9.10.6.1.3
This table defines link station statistics kept for each qllc connection.
Object Identifier
snaqllc01	.1.3.6.1.4.1.9.10.6
This is the MIB module for objects used to manage the QLLC protocol.
qllc	.1.3.6.1.4.1.9.10.6.1
qllcMibConformance	.1.3.6.1.4.1.9.10.6.2
qllcMibCompliances	.1.3.6.1.4.1.9.10.6.2.1
qllcMibGroups	.1.3.6.1.4.1.9.10.6.2.2
Group
qllcLSAdminGroup	.1.3.6.1.4.1.9.10.6.2.2.1
A collection of objects providing configuration capability.
qllcLSOperGroup	.1.3.6.1.4.1.9.10.6.2.2.2
A collection of objects providing operational control capability.
qllcLSStatsGroup	.1.3.6.1.4.1.9.10.6.2.2.3
A collection of objects providing statistics.