You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-SAA-APM-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-SAA-APM-MIB by vendor Cisco

CISCO-SAA-APM-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-SAA-APM-MIB.


Vendor: Cisco
Mib: CISCO-SAA-APM-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- SAA Application Performance Monitoring (SAA APM) MIB
--
-- Feb 2000, Rahul Patel
--
-- Copyright (c) 2000 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************


CISCO-SAA-APM-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32, Gauge32 
                FROM SNMPv2-SMI
        TruthValue, TimeStamp, RowStatus,
        TEXTUAL-CONVENTION
                FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF
        ciscoMgmt
                FROM CISCO-SMI
	OwnerString
                FROM IF-MIB
	SnmpAdminString
		FROM SNMP-FRAMEWORK-MIB
; 

ciscoSaaApmMIB MODULE-IDENTITY
        LAST-UPDATED    "200010100000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service
 
                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA
 
                   Tel: +1 800 553-NETS
 
                E-mail: cs-saa@cisco.com"
        DESCRIPTION
                 "Acronyms and Terms:
		   SAA - Service Assurance Agent
		   APM - Application Performance Monitoring

		 A MIB for controlling SAA APM.
                 APM provides a framework for running scripts,
                 written in TCL language, which help emulate 
                 the data flows of an application. Through this 
                 emulation, the performance of an application across a 
                 network can be computed. The parameters required to 
                 perform an operation are defined in a 'config file'
                 as defined by saaApmCtrlScriptCfgURL.

                 This MIB has three OBJECT group. 'saaApmAppl' group
                 contains global objects while 'saaApmCtrl' group
                 contains the objects to control the APM operation.
                 Controlling includes creation and deletion of the
                 operation and initiating a result-transfer for the
                 operation. 'saaApmOper' group contains objects to
                 get the statistics of the operation."

        REVISION        "200010100000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoMgmt 177 }
 
SaaApmOperErrorCode ::= TEXTUAL-CONVENTION
  STATUS      current
  DESCRIPTION
       "Represents the various errors that could occur
	during APM operation.
	noError(1)       - There are no errors.
	ftpDnldErr(2)    - ftp download error while downloading
			   the script/data/config file.
	targetDown(3)    - Target device is down.
	scriptErr(4)     - The Script has syntax or other errors.
	socketErr(5)     - Socket error occurred while executing
			   the application script.
	internalErr(6)   - Errors other than described here.
        digestErr(7)     - This error indicates that the authentication
			   digest is invalid.
        fileHeaderErr(8) - The header length for the script/scheduler
			   file doesn't match the requirements.
	fileFormatErr(9) - It indicates an invalid file format.
	cacheFull(10)    - Cache for storing the script/scheduler/data
			   file is full.
	lowMem(11)       - Free memory is less than 
			   saaApmApplFreeMemLowWaterMark."
  SYNTAX      INTEGER
  {
    noError(1),
    ftpDnldErr(2),
    targetDown(3),
    scriptErr(4),
    socketErr(5),
    internalErr(6),
    digestErr(7),
    fileHeaderErr(8),
    fileFormatErr(9),
    cacheFull(10),
    lowMem(11)
  }
 
SaaApmDataTransErrorCode ::= TEXTUAL-CONVENTION
  STATUS      current
  DESCRIPTION
       "Represents the various error code for APM data
        transfer.
	
	noError(1)       - No Error.
        ftpErr(2)        - FTP error while uploading results.
	timeoutErr(3)    - Time out error while uploading 
			   results."
  SYNTAX      INTEGER
  {
    noError(1),
    ftpErr(2),
    timeoutErr(3)
  }
 
ciscoSaaApmMIBObjects OBJECT IDENTIFIER ::= { ciscoSaaApmMIB 1 }

--
-- SAA APM Object Groups.
--

saaApmAppl         OBJECT IDENTIFIER ::= { ciscoSaaApmMIBObjects 1 }
saaApmCtrl         OBJECT IDENTIFIER ::= { ciscoSaaApmMIBObjects 2 }
saaApmOper         OBJECT IDENTIFIER ::= { ciscoSaaApmMIBObjects 3 }

--
-- Global SAA APM Objects
--

saaApmApplMajorVersion OBJECT-TYPE
	SYNTAX      Integer32 (1..50)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
	      "SAA APM application major version."
        ::= { saaApmAppl 1 }

saaApmApplMinorVersion OBJECT-TYPE
	SYNTAX       Integer32 (1..50)
	MAX-ACCESS   read-only
	STATUS       current
	DESCRIPTION
	      "SAA APM application minor version."
	::= { saaApmAppl 2 }

saaApmApplMaxOper OBJECT-TYPE
        SYNTAX       Integer32 (1..50)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION 
               "This object defines the maximum total number of 
		operations that can be configured."
        ::= { saaApmAppl 3 }

saaApmApplFreeMemLowWaterMark OBJECT-TYPE
	SYNTAX       Integer32 (1..2147483647)
	UNITS        "bytes"
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
               "If APM determines that the available free processor 
		memory has fallen below this mark, new operations
		will not be configurable until the amount of 
		available free memory is greater than this mark.
                Available free memory is indicated by the
		object, ciscoMemoryPoolFree.
		
		This object's value should not be set so high as to 
		approach or exceed the free processor memory
		available on the managed device."
        ::= { saaApmAppl 4 }

saaApmApplOperCapacity OBJECT-TYPE
	SYNTAX       Gauge32 (1..50)
	MAX-ACCESS   read-only
	STATUS       current
	DESCRIPTION
	       "This object defines the number of new operations that
                can be configured on the device. The number is obtain by
                dividing the memory available for APM by the average 
                memory used for each APM operation. The available
                memory for APM is computed by taking the difference
                between Free Memory on the device and 
                saaApmApplFreeMemLowWaterMark. If the current number of
                operation configured is equal to saaApmApplMaxOper then 
                saaApmApplOperCapacity is zero."
        ::= { saaApmAppl 5 }

--
-- SAA Ctrl
--
-- This group provides the ability to create, control and destroy an APM
-- operation. Apart from control, it also provides the ability to 
-- retrieve the results of an APM operation. It doesn't provide the
-- ability to read the result.
-- 

saaApmCtrlTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF SaaApmCtrlEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "A set of parameters to create, control and destroy
                 an APM Operation."
        ::= { saaApmCtrl 1 }

saaApmCtrlEntry OBJECT-TYPE
        SYNTAX     SaaApmCtrlEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Parameters for controlling APM operation."
        INDEX { saaApmCtrlIndex }
        ::= { saaApmCtrlTable 1}

SaaApmCtrlEntry ::= SEQUENCE {
	saaApmCtrlIndex                   Integer32,
	saaApmCtrlScriptCfgURL            SnmpAdminString,
	saaApmCtrlOwner                   OwnerString,
	saaApmCtrlInitDataTrans           TruthValue,
        saaApmCtrlDataTransTime           TimeStamp,
        saaApmCtrlDataTransStatus         SaaApmDataTransErrorCode,
        saaApmCtrlStatus                  RowStatus,
	saaApmCtrlNvgen                   TruthValue
}

saaApmCtrlIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
             "This object uniquely identifies a row int the
              saaApmCtrlTable. This is a pseudo-random number selected
	      by the management station when creating a row via the 
	      saaApmCtrlStatus object. If the pseudo-random number is
	      already in use, an 'inconsistentValue' error will be 
	      returned by the agent."
        ::= { saaApmCtrlEntry 1 }

saaApmCtrlScriptCfgURL OBJECT-TYPE
        SYNTAX     SnmpAdminString
        MAX-ACCESS read-create    
        STATUS     current
        DESCRIPTION
              "This URL defines the location of the config file required
               to measure the performance of the application. It also
               defines which protocol should be used in downloading the
               file.
               For example
	         ftp://joe:mybirthday@myhost/smtp/smtp.cfg
             
	       The config file contains the parameters required to
	       start and run the operation. Operation/Results control
	       variables, the URL's of the scheduler, and script/data
	       scriptfiles are all possible parameters contained in
	       the config file."
        ::= { saaApmCtrlEntry 2 }

saaApmCtrlOwner OBJECT-TYPE
        SYNTAX     OwnerString (SIZE(1..48))
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
                   "Identifies the entity that created this table row."
        ::= { saaApmCtrlEntry 3 }

saaApmCtrlInitDataTrans OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
            "This object is set to TRUE to initiate result transfer.
             Results are transferred to a server specified in the
	     control file. It is set back automatically to 'false'
             by this system once the results are transferred."
	DEFVAL { false }
        ::= { saaApmCtrlEntry 4 }

saaApmCtrlDataTransTime OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object indicates the time of the last result
             transfer attempt."
        ::= { saaApmCtrlEntry 5 }

saaApmCtrlDataTransStatus OBJECT-TYPE
        SYNTAX     SaaApmDataTransErrorCode 
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object indicates the status of the result transfer."
        ::= { saaApmCtrlEntry 6 }

saaApmCtrlStatus OBJECT-TYPE
        SYNTAX     RowStatus
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
            "saaApmControlScriptCfgURL is the only required object for
             this row to become 'active'.
 
             APM operations are created in one of two ways:
             1) By setting this object to 'createAndGo' and supplying
                a values for saaApmControlScriptCfgURL as part of the
                same set operation.
             2) By setting this object to 'createAndWait' and then
                supplying a value for saaApmControlScriptCfgURL via
                a different set operation.
 
             In the 'createAndGo' case, the row will transition to
             'active' and the APM operation will start.  In the 
             'createAndWait' case, a subsequent set operation will be
             required to transition the row to 'active' and start the
             APM operation.
             
             The APM operation cannot start until saaApmScriptCfgURL is
             set. Until the required object is set, the row will be
             'notReady'.

             The APM operation can be started by setting this object to
             'active'.

             The APM operation can be stopped by setting this object to
             'notInService'.
             
             The APM operation can be deleted by setting this object to
             'destroy'.
	     
             saaApmCtrlStatus transitions from 'active' to
	     'notInService' if the saaApmOperLastStatus is changed to
	     any error other than 'noError' and 'socketErr'."
        ::= { saaApmCtrlEntry 7 }

saaApmCtrlNvgen OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
            "This object is to allow or disallow the operation control
	     info from being written to running-config. It cannot be 
	     set once the operation is 'active'."
        DEFVAL { false }
        ::= { saaApmCtrlEntry 8 }

--
-- APM Operation Table for status
-- 

saaApmOperTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF SaaApmOperEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "A list of Operational status for monitoring APM
                 Operations.
		 
		 All the object in this table are updated after
                 the completion of performance measurement cycle."
        ::= { saaApmOper 1 }

saaApmOperEntry OBJECT-TYPE
        SYNTAX     SaaApmOperEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
            "An entry containing the status information applicable
             to a particular APM operation."
        AUGMENTS { saaApmCtrlEntry }
        ::= { saaApmOperTable 1}

SaaApmOperEntry ::= SEQUENCE {
	saaApmOperLastStartTime   TimeStamp,
	saaApmOperLastEndTime     TimeStamp,
	saaApmOperLastStatus      SaaApmOperErrorCode
}

saaApmOperLastStartTime OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                  "This object represents the start time of the last
                   performance measurement cycle for the application
                   specified by saaApmCtrlScriptCfgURL object."
        ::= { saaApmOperEntry 1 }

saaApmOperLastEndTime OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                  "This object represents the end time of the last
                   performance measurement cycle for the application
                   specified by saaApmCtrlScriptCfgURL object."
        ::= { saaApmOperEntry 2 }
 
saaApmOperLastStatus OBJECT-TYPE
        SYNTAX     SaaApmOperErrorCode
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                  "This object is used to indicate status of the
                   last measurement cycle."
        ::= { saaApmOperEntry 3 }

 
-- 
-- Notification Definitions
--
-- Currently there are no Notifications defined.
--

ciscoSaaApmMIBNotifPrefix OBJECT IDENTIFIER ::= { ciscoSaaApmMIB 2}
ciscoSaaApmMIBNotifs OBJECT IDENTIFIER 
			   ::= { ciscoSaaApmMIBNotifPrefix 0 }

--
-- Conformance Information
--

ciscoSaaApmMIBConformance OBJECT IDENTIFIER
                             ::= { ciscoSaaApmMIB 3 }
ciscoSaaApmMIBCompliances OBJECT IDENTIFIER
                             ::= { ciscoSaaApmMIBConformance 1 }
ciscoSaaApmMIBGroups      OBJECT IDENTIFIER
                             ::= { ciscoSaaApmMIBConformance 2 }

--
-- Compliance Statements
--

ciscoSaaApmMIBCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
               "The compliance statement for entities which implement
                the Cisco SAA APM MIB."
        MODULE  
                MANDATORY-GROUPS {
                   ciscoSaaApmApplGroup,
                   ciscoSaaApmCtrlGroup,
                   ciscoSaaApmOperGroup
                }
        ::= { ciscoSaaApmMIBCompliances 1 }


ciscoSaaApmApplGroup     OBJECT-GROUP
        OBJECTS {
            saaApmApplMajorVersion,
            saaApmApplMinorVersion,
            saaApmApplMaxOper,
            saaApmApplFreeMemLowWaterMark,
            saaApmApplOperCapacity
        }
        STATUS   current
        DESCRIPTION
            "A collection  of objects to provide the general
             information of SAA APM management."
        ::= { ciscoSaaApmMIBGroups 1 }

ciscoSaaApmCtrlGroup     OBJECT-GROUP
        OBJECTS {
            saaApmCtrlScriptCfgURL,
            saaApmCtrlOwner,
            saaApmCtrlInitDataTrans,
            saaApmCtrlDataTransTime,
            saaApmCtrlDataTransStatus,
            saaApmCtrlStatus,
            saaApmCtrlNvgen
        }
        STATUS   current
        DESCRIPTION
              "A collection of objects to control the APM Operations."
        ::= { ciscoSaaApmMIBGroups 2 }

ciscoSaaApmOperGroup     OBJECT-GROUP
        OBJECTS {
            saaApmOperLastStartTime,
            saaApmOperLastEndTime,
            saaApmOperLastStatus
        }
        STATUS   current
        DESCRIPTION
            "A collection of objects to provide the operational status
             of APM Operations."
        ::= { ciscoSaaApmMIBGroups 3 }
 

END