CISCO-SNMP-TARGET-CAPABILITY device MIB details by Cisco

CISCO-SNMP-TARGET-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-SNMP-TARGET-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-SNMP-TARGET-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-SNMP-TARGET-CAPABILITY.my:
-- Cisco SNMP-TARGET-MIB AGENT-CAPABILITIES
--
-- July 2004, Rashmi Purandare
-- 
-- Copyright (c) 2003, 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SNMP-TARGET-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        SnmpAdminString
                FROM SNMP-FRAMEWORK-MIB
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoSnmpTargetCapability MODULE-IDENTITY
        LAST-UPDATED    "200407280000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com, cs-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of SNMP-TARGET-MIB."

        REVISION        "200407280000Z"
        DESCRIPTION
                "Added capabilities for VISM release 3.3."

        REVISION        "200309160000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 359 }

ciscoSnmpTargetCapCatOSV05R0501 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco CatOS 5.5(1)."
    STATUS               current
    DESCRIPTION          "SNMP-TARGET-MIB capabilities."

    SUPPORTS             SNMP-TARGET-MIB
        INCLUDES         { snmpTargetBasicGroup,
                           snmpTargetResponseGroup,
                           snmpTargetCommandResponderGroup }

        VARIATION        snmpTargetAddrTDomain
            SYNTAX       OBJECT IDENTIFIER
            DESCRIPTION  "Only supports snmpUDPDomain."

        VARIATION        snmpTargetAddrStorageType
            SYNTAX       INTEGER { volatile(2), nonVolatile(3),
                                   readOnly(5) }
            DESCRIPTION  "Only supports volatile(2), nonVolatile(3) 
                          and readOnly(5)."

        VARIATION        snmpTargetParamsMPModel
            SYNTAX       INTEGER ( 0|1|3 ) 
            DESCRIPTION  "Only supports SNMPv1 (0), SNMPv2c (1), 
                          and SNMPv3 (3)."

        VARIATION        snmpTargetParamsSecurityModel 
            SYNTAX       INTEGER (1 .. 3) 
            DESCRIPTION  "Only supports SNMPv1 (1), SNMPv2c (2) and 
                          User-Based Security Model (3)."

        VARIATION        snmpTargetParamsSecurityName
            SYNTAX       SnmpAdminString (SIZE(1..32))
            DESCRIPTION  "Maximum length supported is 32 characters."

        VARIATION        snmpTargetParamsStorageType
            SYNTAX       INTEGER { volatile(2), nonVolatile(3),
                                   readOnly(5) }
            DESCRIPTION  "Only supports volatile(2), nonVolatile(3) 
                          and readOnly(5)."

    ::= { ciscoSnmpTargetCapability 1 }

ciscoSnmpTargetCapVISM33 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco VISM Release 3.3"
    STATUS               current
    DESCRIPTION          "SNMP-TARGET-MIB capabilities."

    SUPPORTS             SNMP-TARGET-MIB
        INCLUDES         { snmpTargetBasicGroup }

--Capabilities for VISM-PR

        VARIATION        snmpTargetSpinLock
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrTDomain
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrTAddress
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrTagList
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrParams
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrStorageType
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetAddrRowStatus
            ACCESS       not-implemented
            DESCRIPTION  "Not Supported"

        VARIATION        snmpTargetParamsMPModel
            SYNTAX       INTEGER (0)
            ACCESS       read-only 
            DESCRIPTION  "Read only access and supports 
                          only SNMPv1(0)"

        VARIATION        snmpTargetParamsSecurityModel
            SYNTAX       INTEGER (1)
            ACCESS       read-only
            DESCRIPTION  "Read only access and supports 
                          only SNMPv1 (1)."

        VARIATION        snmpTargetParamsSecurityName
            ACCESS       not-implemented
            DESCRIPTION  "Not supported"

        VARIATION        snmpTargetParamsSecurityLevel
            SYNTAX       INTEGER { noAuthNoPriv(1) }
            ACCESS       read-only
            DESCRIPTION  "Read only access and supports
                          only noAuthNoPriv (1)."

        VARIATION        snmpTargetParamsStorageType
            SYNTAX       INTEGER { readOnly(5) }
            ACCESS       read-only
            DESCRIPTION  "Read only access and only 
                          supports readOnly(5) since it
                          cannot be modified."

        VARIATION        snmpTargetParamsRowStatus
            SYNTAX       INTEGER { active(1) }
            ACCESS       read-only
            DESCRIPTION  "Read only access."

    ::= { ciscoSnmpTargetCapability 2 }
END