You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-SVI-AUTOSTATE-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-SVI-AUTOSTATE-MIB by vendor Cisco

CISCO-SVI-AUTOSTATE-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-SVI-AUTOSTATE-MIB.


Vendor: Cisco
Mib: CISCO-SVI-AUTOSTATE-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-SVI-AUTOSTATE-MIB
--
--
-- Copyright (c) 2004 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SVI-AUTOSTATE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI

    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF

    TruthValue
        FROM SNMPv2-TC

    ifIndex
        FROM IF-MIB

    ciscoMgmt
        FROM CISCO-SMI;

ciscoSVIAutostateMIB MODULE-IDENTITY
    LAST-UPDATED "200404060000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
        "        Cisco Systems
                 Customer Service

         Postal: 170 W Tasman Drive
                 San Jose, CA 95134
                 USA

            Tel: +1 800 553-NETS

         E-mail: cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "The MIB module is for configuration of the switch virtual
         interface (SVI) autostate feature. Autostate feature
         is a mechanism to calculate the state of a SVI dynamically
         when some condition occurs such as a failure of 
         a participating interface in that SVI."
    REVISION    "200404060000Z"
    DESCRIPTION
        "Initial revision of this MIB module."
    ::= { ciscoMgmt 376 } 

ciscoSVIAutostateMIBNotifs
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIB 0 }
ciscoSVIAutostateMIBObjects
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIB 1 }
ciscoSVIAutostateMIBConformance
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIB 2 }

csaGlobal
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIBObjects 1 }
csaInterface
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIBObjects 2 }

-- csaFeatureEnable

csaFeatureEnable  OBJECT-TYPE
    SYNTAX        TruthValue 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object indicates whether the autostate feature is
         enabled. If it is set to 'false', the feature is disabled
         in the device and the value of csaInterfaceMode does not
         take effect."  
    ::= { csaGlobal 1 }

csaTrackedVlansLow  OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE(0..256)) 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A string of octets containing one bit per VLAN for 
         VLANs with VlanIndex value of 0 to 2047. The first
         octet corresponds to VLANs with VlanIndex values
         of 0 through 7; the second octet to VLANs 8 through
         15; etc.  The most significant bit of each octet
         corresponds to the lowest value VlanIndex in that octet.

         For each VLAN, if it is tracked by the SVI autostate
         feature then the bit corresponding to that VLAN is set
         to '1'. A tracked VLAN, whose all interfaces having their
         cdsInterfaceMode object value of 'track' and not in 
         forwarding state, will go down."  
    ::= { csaGlobal 2 }

csaTrackedVlansHigh  OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE(0..256)) 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A string of octets containing one bit per VLAN for 
         VLANs with VlanIndex value of 2048 to 4095. The first
         octet corresponds to VLANs with VlanIndex values
         of 2048 through 2055; the second octet to VLANs 2056
         through 2063; etc.  The most significant bit of each
         octet corresponds to the lowest value VlanIndex in that
         octet.

         For each VLAN, if it is tracked by the SVI autostate
         feature then the bit corresponding to that VLAN is set
         to '1'. A tracked VLAN, whose all interfaces having their
         cdsInterfaceMode object value of 'track' and not in   
         forwarding state, will go down."
    ::= { csaGlobal 3 }

-- csaIfConfigTable

csaIfConfigTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CsaIfConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table contains information and configuration
         of interface mode regarding the SVI autostate
         feature."
    ::= { csaInterface 1 }

csaIfConfigEntry OBJECT-TYPE
    SYNTAX        CsaIfConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "There will be an entry for each interface that supports 
          SVI autostate feature. A row instance contains the
          configured mode at each interface for Autostate purpose."
    INDEX { ifIndex }
    ::= { csaIfConfigTable 1 }

CsaIfConfigEntry ::= SEQUENCE {
        csaInterfaceMode                INTEGER 
    }

csaInterfaceMode OBJECT-TYPE
    SYNTAX       INTEGER {
                     normal(1),
                     exclude(2),
                     track(3)
                 } 
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates the interface mode regarding
         SVI autostate feature. This object only takes effect if
         the value of csaFeatureEnable object is 'true'.

         'normal' indicates that when SVI autostate feature is
         enabled, this interface will participate normally
         in the autostate calculation of the SVI which it
         associates.

         'exclude' indicates that when SVI autostate feature is
         enabled, this interface will be excluded from the autostate
         calculation of the SVI which it associates.

         'track' indicates that when SVI autostate feature is
         enabled, this interface will be tracked in the autostate
         calculation of the tracked SVI which it associates. If all
         tracked interfaces of this SVI go down, the corresponding
         SVI goes down." 
    ::= { csaIfConfigEntry 1 }

-- Conformance

csaMIBCompliances
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIBConformance 1 }

csaMIBGroups
    OBJECT IDENTIFIER ::= { ciscoSVIAutostateMIBConformance 2 }

csaMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for the CISCO-SVI-AUTOSTATE-MIB"
    MODULE
        MANDATORY-GROUPS { ciscoSVIAutostateGroup }

        GROUP  ciscoSVITrackedVlanGroup
        DESCRIPTION
            "This group is mandatory only for the platform which
             supports tracked VLANs."

    ::= { csaMIBCompliances 1 }

-- Units of Conformance

-- ciscoSVIAutostateGroup

ciscoSVIAutostateGroup OBJECT-GROUP
    OBJECTS {
        csaFeatureEnable,
        csaInterfaceMode
    }
    STATUS current
    DESCRIPTION
        "A collection of objects which are used to configure as
         well as show information regarding the SVI autostate 
         feature."
    ::= { csaMIBGroups 1 }

ciscoSVITrackedVlanGroup OBJECT-GROUP
    OBJECTS {
        csaTrackedVlansLow,
        csaTrackedVlansHigh
    }
    STATUS current
    DESCRIPTION
        "A collection of objects which are used to configure as
         well as show information regarding VLANs tracked by the
         SVI autostate feature."
    ::= { csaMIBGroups 2 }

END