You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-WAN-RSRC-PART-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-WAN-RSRC-PART-CAPABILITY by vendor Cisco

CISCO-WAN-RSRC-PART-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-WAN-RSRC-PART-CAPABILITY.


Vendor: Cisco
Mib: CISCO-WAN-RSRC-PART-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- ciscoWanRsrcpartCapabilities MIB
--
-- AGENT-CAPABILITIES mib for CISCO-WAN-RSRC-PART-MIB 
--
-- November 2002, Sathya Prasad
--
-- Copyright(c) 2002 by Cisco Systems,Inc.
--
-- *****************************************************************

CISCO-WAN-RSRC-PART-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        Unsigned32
                FROM CISCO-TC
        ciscoAgentCapability
                FROM CISCO-SMI;   

ciscoWanRsrcPartCapability MODULE-IDENTITY
        LAST-UPDATED    "200211110000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
        DESCRIPTION
            "The Agent Capabilities for CISCO-WAN-RSRC-PART-MIB."

        REVISION "200211110000Z"
        DESCRIPTION
            "Added ciscoWanRsrcPartCapability(4)
             for version 4.0.0 for AXSM, AXSME,
             AXSM-XG and PXM1E service modules."

        REVISION "200203130000Z"
        DESCRIPTION
            "Initial version of this MIB module."

        ::= { ciscoAgentCapability 260 }

cwRsrcPartCapabilityV2R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.0.00
                          and Release 2.1.00"
    STATUS               current
    DESCRIPTION          "CISCO-WAN-RSRC-PART-MIB Capabilities for
                         ATM Switch Service Module(AXSM) and 
                         Enhanced AXSM(AXSM-E)."

    SUPPORTS CISCO-WAN-RSRC-PART-MIB
	INCLUDES { cwRsrcPartMIBGroup, 
		   cwRsrcPartIlmiMIBGroup}

	VARIATION   cwRsrcPartID
	SYNTAX      Unsigned32(1..20)
	DESCRIPTION "Maximum value supported is 20."

	VARIATION   cwRsrcPartController
	SYNTAX      Unsigned32(1..20)
	DESCRIPTION "Maximum value supported is 20."

	VARIATION   cwRsrcPartRowStatus
	SYNTAX      INTEGER { 
		        active(1), notInService(2),createAndGo(4),destroy(6)
		    }
	DESCRIPTION "Does not support createAndWait(5)."
    ::= { ciscoWanRsrcPartCapability 1 }

cwRsrcPartCapabilityRpmV2R0160 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.1.60"
    STATUS               current
    DESCRIPTION          "Agent Capabilities for CISCO-WAN-RSRC-PART-MIB
                          for RPM-PR Module."

    SUPPORTS CISCO-WAN-RSRC-PART-MIB

        INCLUDES { cwRsrcPartMIBGroup }


	VARIATION   cwRsrcPartID
        SYNTAX      Unsigned32 (1..10)
	DESCRIPTION "Only limited range is supported.
                     The Value 1 is reserved for PNNI Controller."

	VARIATION   cwRsrcPartController
	DESCRIPTION "Value 2 is assumed to be for PNNI Controller."
	
        VARIATION cwRsrcPartEgrGuarPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartEgrMaxPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartIngGuarPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartIngMaxPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartVpiLo
        SYNTAX Unsigned32 (0..255)
        DESCRIPTION
            "Restricted range is supported.

             For VCC partition, only value zero
             is supported.

             For VPC partition, 1-255."

        VARIATION cwRsrcPartVpiHigh
        SYNTAX Unsigned32 (0..255)
        DESCRIPTION
            "Restricted range is supported.

             For VCC partition, only value zero
             is supported.

             For VPC partition, 1-255."

        VARIATION cwRsrcPartVciLo
        SYNTAX Unsigned32 (1..65535)
        DESCRIPTION
            "Restricted range is supported.
             For VCC partiton, the valid range is 1-3808.
             For VPC partiton, the valid range is 0-65535."

        VARIATION cwRsrcPartVciHigh
        SYNTAX Unsigned32 (1..65535)
        DESCRIPTION
            "Restricted range is supported.
             For VCC partiton, the valid range is 1-3808.
             For VPC partiton, the valid range is 0-65535."

        VARIATION cwRsrcPartGuarCon
        ACCESS    read-only
        DESCRIPTION
            "Write operation is not supported."

        VARIATION cwRsrcPartMaxCon
        ACCESS    read-only
        DESCRIPTION
            "Write operation is not supported."

	VARIATION   cwRsrcPartRowStatus
	SYNTAX      INTEGER {
                        active(1),
                        createAndGo(4),
                        destroy(6)
                    }
	DESCRIPTION "Does not support notInService(2),
                     notReady(3) and createAndWait(5)."
	
    ::= { ciscoWanRsrcPartCapability 2 }

cwRsrcPartCapabilityRpmxfV12R02 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "IOS Release 12.2.
                          MGX8850 Release 3.0.00."
    STATUS               current
    DESCRIPTION          "Agent Capabilities for CISCO-WAN-RSRC-PART-MIB
                          for RPM-XF Module."

    SUPPORTS CISCO-WAN-RSRC-PART-MIB

        INCLUDES { cwRsrcPartMIBGroup }


	VARIATION   cwRsrcPartID
        SYNTAX      Unsigned32 (1..10)
	DESCRIPTION "Only limited range is supported.
                     The Value 1 is reserved for PNNI Controller."

	VARIATION   cwRsrcPartController
	DESCRIPTION "Value 2 is assumed to be for PNNI Controller.
	             Value 3 is assumed to be for LSC Controller."
	
        VARIATION cwRsrcPartEgrGuarPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartEgrMaxPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartIngGuarPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartIngMaxPctBwConf
        DESCRIPTION
            "Only whole percentage is supported. For example
             1%, 10% etc."

        VARIATION cwRsrcPartVpiLo
        SYNTAX Unsigned32 (0..240)
        DESCRIPTION
            "Restricted range is supported."

        VARIATION cwRsrcPartVpiHigh
        SYNTAX Unsigned32 (0..240)
        DESCRIPTION
            "Restricted range is supported."

        VARIATION cwRsrcPartVciLo
        SYNTAX Unsigned32 (32..65535)
        DESCRIPTION
            "Restricted range is supported."

        VARIATION cwRsrcPartVciHigh
        SYNTAX Unsigned32 (32..65535)
        DESCRIPTION
            "Restricted range is supported."

        VARIATION cwRsrcPartGuarCon
        SYNTAX Unsigned32(0..15744)
        DESCRIPTION
            "Restricted range is supported."

        VARIATION cwRsrcPartMaxCon
        SYNTAX Unsigned32(0..15744)
        DESCRIPTION
            "Restricted range is supported."

	VARIATION   cwRsrcPartRowStatus
	SYNTAX      INTEGER {
                        active(1),
                        createAndGo(4),
                        destroy(6)
                    }
	DESCRIPTION "Does not support notInService(2),
                     notReady(3) and createAndWait(5)."
	
    ::= { ciscoWanRsrcPartCapability 3 }

cwRsrcPartCapabilityV4R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 4.0.00"
    STATUS               current
    DESCRIPTION          "CISCO-WAN-RSRC-PART-MIB Capabilities for
                         ATM Switch Service Module(AXSM),  
                         Enhanced AXSM(AXSM-E), AXSM-XG and PXM1E"

    SUPPORTS CISCO-WAN-RSRC-PART-MIB
    INCLUDES { cwRsrcPartMIBGroup, 
               cwRsrcPartIlmiMIBGroup}

    VARIATION   cwRsrcPartID
    SYNTAX      Unsigned32(1..20)
    DESCRIPTION "Maximum value supported is 20."

    VARIATION   cwRsrcPartController
    SYNTAX      Unsigned32(1..20)
    DESCRIPTION "Maximum value supported is 20."

    VARIATION   cwRsrcPartRowStatus
    SYNTAX      INTEGER { 
                active(1), notInService(2),createAndGo(4),destroy(6)
                }
    DESCRIPTION "Does not support createAndWait(5)."

    VARIATION   cwRsrcPartIlmiEstablishConPollIntvl
    SYNTAX      Unsigned32(1..16)
    DESCRIPTION "Maximum value supported is 16."

    VARIATION   cwRsrcPartIlmiCheckConPollIntvl
    SYNTAX      Unsigned32(0..255)
    DESCRIPTION "Maximum value supported is 255."

    VARIATION   cwRsrcPartIlmiConPollInactFactor
    SYNTAX      Unsigned32(1..255)
    DESCRIPTION "Minimum value supported is 1 and 
                 maximum value supported is 255."

    ::= { ciscoWanRsrcPartCapability 4 }

END