You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > DTRConcentratorMIB
ActiveXperts Network Monitor 2019##AdminFavorites

DTRConcentratorMIB by vendor Cisco

DTRConcentratorMIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing DTRConcentratorMIB.


Vendor: Cisco
Mib: DTRConcentratorMIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
DTRConcentratorMIB DEFINITIONS ::= BEGIN

-- From file: "dtrc.mib"
-- Compile options "T M"

-- IMPORTS (for SNMPv2)
--   enterprises, Counter32, Integer32, TimeTicks
--            FROM SNMPv2-SMI-v1
--   OBJECT-TYPE
--            FROM RFC-1212
--   DisplayString, RowStatus, MacAddress
--            FROM SNMPv2-TC-v1
--   InterfaceIndex
--            FROM IF-MIB
--   IANAifType
--            FROM IANAifType-MIB;

IMPORTS
      enterprises, Counter, TimeTicks
               FROM RFC1155-SMI
      OBJECT-TYPE
              FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB;
--      OBJECT-TYPE
--              FROM RFC-1212;

-- SNMPv1 Textual Conventions
Counter32 ::= Counter
Integer32 ::= INTEGER
RowStatus ::= INTEGER {
                        active(1),
                        notInService(2),
                        notReady(3),
                        createAndGo(4),
                        createAndWait(5),
                        destroy(6)
                      }
MacAddress ::= OCTET STRING (SIZE(6))
InterfaceIndex ::= Integer32
IANAifType ::= INTEGER {
        other(1),
        regular1822(2),
        hdh1822(3),
        ddnX25(4),
        rfc877x25(5),
        ethernetCsmacd(6),
        iso88023Csmacd(7),
        iso88024TokenBus(8),
        iso88025TokenRing(9),
        iso88026Man(10),
        starLan(11),
        proteon10Mbit(12),
        proteon80Mbit(13),
        hyperchannel(14),
        fddi(15),
        lapb(16),
        sdlc(17),
        ds1(18),
        e1(19),
        basicISDN(20),
        primaryISDN(21),
        propPointToPointSerial(22),
        ppp(23),
        softwareLoopback(24),
        eon(25),
        ethernet3Mbit(26),
        nsip(27),
        slip(28),
        ultra(29),
        ds3(30),
        sip(31),
        frameRelay(32),
        rs232(33),
        para(34),
        arcnet(35),
        arcnetPlus(36),
        atm(37),
        miox25(38),
        sonet(39),
        x25ple(40),
        iso88022llc(41),
        localTalk(42),
        smdsDxi(43),
        frameRelayService(44),
        v35(45),
        hssi(46),
        hippi(47),
        modem(48),
        aal5(49),
        sonetPath(50),
        sonetVT(51),
        smdsIcip(52),
        propVirtual(53),
        propMultiplexor(54)
        }

cisco                OBJECT IDENTIFIER ::= { enterprises 9 }
catProd              OBJECT IDENTIFIER ::= { cisco 1 }
cat2600              OBJECT IDENTIFIER ::= { catProd 111 }
cat2600Ts            OBJECT IDENTIFIER ::= { cat2600 1 }
dtrMIBs              OBJECT IDENTIFIER ::= { cat2600Ts 3 }
dtrConcMIB           OBJECT IDENTIFIER ::= { dtrMIBs 1 }
dtrConcMIBObjects    OBJECT IDENTIFIER ::= { dtrConcMIB 1 }
dtrConcMIBBase       OBJECT IDENTIFIER ::= { dtrConcMIBObjects 1 }
dtrConcMIBSpTree     OBJECT IDENTIFIER ::= { dtrConcMIBObjects 2 }
dtrConcMIBForwarding OBJECT IDENTIFIER ::= { dtrConcMIBObjects 3 }
dtrConcMIBMRI        OBJECT IDENTIFIER ::= { dtrConcMIBObjects 4 }
dtrConcMIBStats      OBJECT IDENTIFIER ::= { dtrConcMIBObjects 5 }

-- MODULE-IDENTITY
--  LastUpdated
--    9602131200Z
--  OrgName
--    Cisco
--  Descr
--     The MIB Module for DTR Concentrators.

BridgeId ::= OCTET STRING (SIZE(8))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The bridge identifier used in the spanning tree and defined in
--     ISO/IEC 10038:1993, clause 4.

DynamicFdbStatus ::= INTEGER {
        other(1),
        invalid(2),
        learned(3),
        self(4),
        mgmt(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Status of an entry in the CRF Filtering Database.  Other (1)
--     indicates that some other MIB object is being used to determine
--     how/if the frame is forwarded.  Invalid(2) indicates this entry
--     is no longer valid, but has not been flushed from the table.
--     Learned(3) indicates that dtrFdbDynamicAddrPortNumber for this
--     entry was learned.  Self(4) indicates dtrFdbDynamicAddrStnAddress
--     represents one of the CRF Port Addresses.  Mgmt(5) indicates
--     dtrFdbDynamicAddrStnAddress is also a value of an existing
--     DtrFdbStaticAddrStnAddress

StaticFdbStatus ::= INTEGER {
        other(1),
        invalid(2),
        permanent(3),
        deleteOnReset(4)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Status of an entry in the CRF Filtering Database.  Other(1) indicates
--     this entry is currently in use under conditions different from the
--     available status definitions that follow. Invalid(2) indicates this
--     entry is no longer valid, but has not been flushed from the table.
--     Writing this value to the object removes the entry.  Permanent(3)
--     indicates that the entry is currently in use and will remain so after
--     the next reset.  DeleteOnReset(4) indicates the entry is currently in
--     use and will remain so until the next reset.

PortId ::= OCTET STRING(SIZE(2))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The port identifier used in the spanning tree protocol.

RouteDescriptor ::= OCTET STRING(SIZE(3))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--     The Route Descriptor (RD) consists of 2 parts; a 4 bit Bridge Number
--      and a 12 bit LAN ID.  This identifies a bridge (BN) that has a port
--      on the local LAN and a port connected to the indicated LAN ID. This
--      object consists of 3 octets. The first octet contains the BN in the 4
--      least significant bits.  The second octet contains the most significant
--      octet of the LAN ID. and the final octet contains the least significant
--      4 bits of the LAN ID in the 4 most significant bits of the octet.

Timeout ::= INTEGER (0..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    timer in 1/100 of sec

dtrConcentratorAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " MAC address used by DTR Concentrator for uniqueness. It must
          be unique "
    ::= { dtrConcMIBBase 1 }

dtrOperNumberOfCrfs OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " Number of Concentrator Relay Functions within the DTR
          Concentrator. Min value is 1.  Writing this object sets the number
          of CRFs within the DTR Concentrator.     "
    ::= { dtrConcMIBBase 2 }

dtrOperNumberOfBridgeRelays OBJECT-TYPE
    SYNTAX INTEGER(0 | 1)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " Number of bridge relay functions within the DTR Concentrator.
          Value of 0 or 1 is permitted.  Writing this object sets the number of bridge
           relay functions within the DTR Concentrator. "
    ::= { dtrConcMIBBase 3 }

dtrCRFTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrCRFEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " This table contains information for each concentrator relay
          function in the DTR Concentrator."
    ::= { dtrConcMIBBase 6 }

dtrCRFEntry OBJECT-TYPE
    SYNTAX DtrCRFEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "  "
    INDEX { dtrCRFIndex }
    ::= { dtrCRFTable 1 }

DtrCRFEntry ::= SEQUENCE {
    dtrCRFIndex INTEGER,
    dtrCRFNumberOfPorts INTEGER,
    dtrCRFPortMask OCTET STRING,
    dtrCRFName DisplayString,
    dtrCRFMaxInfo INTEGER,
    dtrCRFMacAddress MacAddress,
    dtrCRFLocalLanId INTEGER,
    dtrCRFFdbAgingTime INTEGER,
    dtrCRFMRIEnable INTEGER,
    dtrCRFLearnedEntryDiscards Counter32
    }

dtrCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrCRFEntry 1 }

dtrCRFNumberOfPorts OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of CRF Ports controlled by this CRF "
    ::= { dtrCRFEntry 2 }

dtrCRFPortMask OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The set of interfaces (ifIndex) that are associated
           with this instance of a CRF.
           Each Octet within the value of this object specifies a set
           of eight interfaces, with the first octet specifying
           interfaces (ifIndex) 1 through 8, the second octet specifying
           interfaces 9 through 16 and so on.  Within each octet, the
           most significant bit represents the lowest numbered interface,
           and the least significant bit represents the highest numbered
           interface.
           Writing this variable will modify the CRF configuration and update
           the value contained in dtrCRFNumberOfPorts."
    ::= { dtrCRFEntry 3 }

dtrCRFName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The textual name of the CRF.  The value of this obje should be the
           name of the CRF as assigned by the DTR Concentrator and should
           be suitable for use in commands entered at the DTR Concentrator 'console'"
    ::= { dtrCRFEntry 4 }

dtrCRFMaxInfo OBJECT-TYPE
    SYNTAX INTEGER(1500..18200)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The maximum size of the INFO field that the CRF can
          transmit/receive "
    ::= { dtrCRFEntry 5 }

dtrCRFMacAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The MAC address ised with the dtrCRFSpTreePriority to form
          the CRF Identifier used in the spanning tree protocol.  This
          address must be unique and it is recommended that this
          address be the specific MAC address of the lowest numbered
          C-Port.  "
    ::= { dtrCRFEntry 6 }

dtrCRFLocalLanId OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " This is the value of the local lan id used by the CRF. This value
          may be assigned or may be learned by the CRF learning process.
          Valid values range from 0 to 4095. Values outside this range
          indicate that the lan id value has not been assigned or learned."
    ::= { dtrCRFEntry 7 }

dtrCRFFdbAgingTime OBJECT-TYPE
    SYNTAX INTEGER(10..1000000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The timeout period in seconds for aging out dynamic entries from
          the Filtering Database.  Recommended default is 300 seconds.    "
    DEFVAL { 300 }
    ::= { dtrCRFEntry 8 }

dtrCRFMRIEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " This object enables/disables the MRI function in the CRF "
    ::= { dtrCRFEntry 9 }

dtrCRFLearnedEntryDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The total number of CRF Filtering Database entries, which
          have been or would have been learned, but have been discarded
          due to a lack of space to store them in the Filtering
          Database "
    ::= { dtrCRFEntry 10 }

dtrCRFPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrCRFPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " This table contains information for each CRF Port in a Concentrator
          Relay Function      "
    ::= { dtrConcMIBBase 7 }

dtrCRFPortEntry OBJECT-TYPE
    SYNTAX DtrCRFPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "     "
    INDEX { dtrCRFPortCRFIndex, dtrCRFPortNumber }
    ::= { dtrCRFPortTable 1 }

DtrCRFPortEntry ::= SEQUENCE {
    dtrCRFPortCRFIndex INTEGER,
    dtrCRFPortNumber INTEGER,
    dtrCRFPortEnable INTEGER,
    dtrCRFPortifIndex InterfaceIndex,
    dtrCRFOperPortType IANAifType,
    dtrCRFPortMtuExceededDiscards Counter32,
    dtrCRFPortDelayExceededDiscards Counter32
    }

dtrCRFPortCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying an instance of CRF "
    ::= { dtrCRFPortEntry 1 }

dtrCRFPortNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number for which this entry contains CRF
          management information."
    ::= { dtrCRFPortEntry 2 }

dtrCRFPortifIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax Integer32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " A unique value, greater than zero that corresponds to the
           interface this CRF Port is assigned (corresponds to ifIndex).
          Writing this object defines the correspondence between the
          CRF Port and the interface (C-Port or bridge relay function
          interface as determined by dtrCRFOperPortType.)"
    ::= { dtrCRFPortEntry 3 }

dtrCRFPortEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The enable/disable status of the CRF Port.  This control can be
          used to disable a port."
    ::= { dtrCRFPortEntry 4 }

dtrCRFOperPortType OBJECT-TYPE
    SYNTAX IANAifType
--    Rsyntax INTEGER {
--        other(1),
--        regular1822(2),
--        hdh1822(3),
--        ddnX25(4),
--        rfc877x25(5),
--        ethernetCsmacd(6),
--        iso88023Csmacd(7),
--        iso88024TokenBus(8),
--        iso88025TokenRing(9),
--        iso88026Man(10),
--        starLan(11),
--        proteon10Mbit(12),
--        proteon80Mbit(13),
--        hyperchannel(14),
--        fddi(15),
--        lapb(16),
--        sdlc(17),
--        ds1(18),
--        e1(19),
--        basicISDN(20),
--        primaryISDN(21),
--        propPointToPointSerial(22),
--        ppp(23),
--        softwareLoopback(24),
--        eon(25),
--        ethernet3Mbit(26),
--        nsip(27),
--        slip(28),
--        ultra(29),
--        ds3(30),
--        sip(31),
--        frameRelay(32),
--        rs232(33),
--        para(34),
--        arcnet(35),
--        arcnetPlus(36),
--        atm(37),
--        miox25(38),
--        sonet(39),
--        x25ple(40),
--        iso88022llc(41),
--        localTalk(42),
--        smdsDxi(43),
--        frameRelayService(44),
--        v35(45),
--        hssi(46),
--        hippi(47),
--        modem(48),
--        aal5(49),
--        sonetPath(50),
--        sonetVT(51),
--        smdsIcip(52),
--        propVirtual(53),
--        propMultiplexor(54)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " Indicates the type of interface that this CRF Port  is assigned to.
           Only two types are permitted, a C-Port and an interal bridge
           relay function.
           Write this object to set the type of interface."
    ::= { dtrCRFPortEntry 5 }

dtrCRFPortMtuExceededDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of frames discarded by the CRF Port due to excessive
          size (exceeds CrfMaxInfo)     "
    ::= { dtrCRFPortEntry 6 }

dtrCRFPortDelayExceededDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of frames discarded by the CRF Port due to excessive
           delay through the CRF "
    ::= { dtrCRFPortEntry 7 }

dtrSpanningTreeHoldTime OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The minimum time period, in seconds, elapsing between the
         transmission of Configuration PDUs through a given port (CRFP
         or internal bridge).  This is a fixed parameter of the DTR
         Concentrator used by all member CRF and bridge entities. Value
         specified by 802.1d is 1 second      "
    ::= { dtrConcMIBSpTree 1 }

dtrSpanningTreeProtocolSpecification OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        ieee8021d(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " An indication of what version of the Spanning Tree Protocol is
          being run on the DTR Concentrator "
    ::= { dtrConcMIBSpTree 2 }

dtrSpanningTreeTimeSinceTopoChange OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The time (in 1/100ths of a second) since the last topology
          change was detected by the CRF or bridge entities within the
          DTR Concentrator.     "
    ::= { dtrConcMIBSpTree 3 }

dtrSpanningTreeTopologyChanges OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The total number of topology changes detected by this
          concentrator since the management entity was last reset or
          initialized "
    ::= { dtrConcMIBSpTree 4 }

dtrSpanningTreeBridgeForwardDelay OBJECT-TYPE
    SYNTAX Timeout(400..3000)
--    Rsyntax INTEGER(400..3000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The value of the Forward Delay parameter when the entity (CRF or
          bridge) is the Root or is attempting to become the Root.  The
          granularity of this timer is 1 second. "
    ::= { dtrConcMIBSpTree 5 }

dtrSpanningTreeBridgeHelloTime OBJECT-TYPE
    SYNTAX Timeout(100..1000)
--    Rsyntax INTEGER(100..1000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The value of the Hello Time parameter when the entity (CRF or
          Bridge) is the Root or attempting to become the Root.  The time
          interval between transmissions of Topology Change Notification
          PDUs.  The granularity of this timer is 1 second. "
    ::= { dtrConcMIBSpTree 6 }

dtrSpanningTreeTreeBridgeMaxAge OBJECT-TYPE
    SYNTAX INTEGER(600..4000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The value of the Max Age parameter when the entity (CRF or
          bridge) is the Root or is attempting to become the Root.
          The granularity of this timer is 1 second. "
    ::= { dtrConcMIBSpTree 7 }

dtrCRFSpTreeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrCRFSpTreeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the spanning tree information for each CRF."
    ::= { dtrConcMIBSpTree 9 }

dtrCRFSpTreeEntry OBJECT-TYPE
    SYNTAX DtrCRFSpTreeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "  "
    INDEX { dtrCRFSpTreeCRFIndex }
    ::= { dtrCRFSpTreeTable 1 }

DtrCRFSpTreeEntry ::= SEQUENCE {
    dtrCRFSpTreeCRFIndex INTEGER,
    dtrCRFSpTreePriority INTEGER,
    dtrCRFSpTreeDesignatedRoot BridgeId,
    dtrCRFSpTreeRootCost Integer32,
    dtrCRFSpTreeRootPort Integer32,
    dtrCRFSpTreeMaxAge Timeout,
    dtrCRFSpTreeHelloTime Timeout,
    dtrCRFSpTreeForwardDelay Timeout
    }

dtrCRFSpTreeCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrCRFSpTreeEntry 1 }

dtrCRFSpTreePriority OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The value of the write-able portion of the CRF Identifier and the
          first two octets of the CRF Identifier.  The last 6 octets of the
          CRF ID are given by the value of dtrCRFMacAddress.     "
    ::= { dtrCRFSpTreeEntry 2 }

dtrCRFSpTreeDesignatedRoot OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The bridge identifier of the root of the spanning tree as
          determined by the spanning tree protocol executed at this node "
    ::= { dtrCRFSpTreeEntry 3 }

dtrCRFSpTreeRootCost OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The cost of the path to the root as seen from this CRF "
    ::= { dtrCRFSpTreeEntry 4 }

dtrCRFSpTreeRootPort OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number of the CRF Port which offers the lowest cost
          path from this CRF to the root "
    ::= { dtrCRFSpTreeEntry 5 }

dtrCRFSpTreeMaxAge OBJECT-TYPE
    SYNTAX Timeout
--    Rsyntax INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The maximum age of Spanning Tree Protocol information learned
          from the network on any port (CRF or bridge within the DTR
          Concentrator) before it is discarded. Units are in 1/100th of
          a second.  This is the actual value currently in use"
    ::= { dtrCRFSpTreeEntry 6 }

dtrCRFSpTreeHelloTime OBJECT-TYPE
    SYNTAX Timeout
--    Rsyntax INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The amount of time between transmission of Configuration bridge
          PDUs used by a CRF that is attempting to become the Root or is
          the Root.  This is the value currently in use "
    ::= { dtrCRFSpTreeEntry 7 }

dtrCRFSpTreeForwardDelay OBJECT-TYPE
    SYNTAX Timeout
--    Rsyntax INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " This time value, measured in 1/100th of a second, is used to
          control the amount of time spent in the Listening state when
          moving from the Blocking state to the Listening state and the
          amount of time in the Learning state when moving from the
          Learning state to the Forwarding state.  This time value is used
          for ageing dynamic entries in the Filtering Database while the
          Topology Change flag is set in protocol messages received from
          the root. This is the value the CRF is currently using     "
    ::= { dtrCRFSpTreeEntry 8 }

dtrCRFPortSpTreeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrCRFPortSpTreeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains spanning tree information for each CRF Port."
    ::= { dtrConcMIBSpTree 10 }

dtrCRFPortSpTreeEntry OBJECT-TYPE
    SYNTAX DtrCRFPortSpTreeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "      "
    INDEX { dtrCRFPortSpTreeCRFIndex, dtrCRFPortSpTreeNumber }
    ::= { dtrCRFPortSpTreeTable 1 }

DtrCRFPortSpTreeEntry ::= SEQUENCE {
    dtrCRFPortSpTreeCRFIndex INTEGER,
    dtrCRFPortSpTreeNumber INTEGER,
    dtrCRFPortSpTreePriority INTEGER,
    dtrCRFPortSpTreeState INTEGER,
    dtrCRFPortSpTreePathCost INTEGER,
    dtrCRFPortSpTreeDesignatedRoot BridgeId,
    dtrCRFPortSpTreeDesignatedCost Integer32,
    dtrCRFPortSpTreeDesignatedBridge BridgeId,
    dtrCRFPortSpTreeDesignatedPort PortId,
    dtrCRFPortSpTreeForwardTransitions Counter32
    }

dtrCRFPortSpTreeCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrCRFPortSpTreeEntry 1 }

dtrCRFPortSpTreeNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The CRF Port number for which this entry contains CRF
         management information."
    ::= { dtrCRFPortSpTreeEntry 2 }

dtrCRFPortSpTreePriority OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The value of the priority field which is contained in the
          first byte of the CRF Port Identifier.  The second byte of
          the CRF Port Identifier is given by the value of CRF Port as
          identified by dtrCRFPortSpTreeNumber"
    ::= { dtrCRFPortSpTreeEntry 3 }

dtrCRFPortSpTreeState OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(1),
        blocking(2),
        listening(3),
        learning(4),
        forwarding(5),
        broken(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The CRF Port state as defined by the Spanning Tree.  If the DTR
          concentrator detects that a port is malfunctioning, it will place
          that port into the broken(6) state. the states are defined as:
          disabled(1), blocking(2), listening(3), learning(4), forwarding(5),
          and broken(6).     "
    ::= { dtrCRFPortSpTreeEntry 4 }

dtrCRFPortSpTreePathCost OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The contribution of the path through this CRF Port,
          identified by dtrCRFPortSpTreeNumber when the CRF Port is the
          Root Port, to the total cost of the path to the Root for this
          CRF "
    ::= { dtrCRFPortSpTreeEntry 5 }

dtrCRFPortSpTreeDesignatedRoot OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The unique bridge identifier of the bridge recorded as the Root
          in the root identifier parameter of the Configuration PDUs
          transmitted by the designated bridge for the LAN to which the
          CRF Port is attached.     "
    ::= { dtrCRFPortSpTreeEntry 6 }

dtrCRFPortSpTreeDesignatedCost OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The cost of the path to the Root offered by the Designated Port
          on the LAN to which this CRF Port is attached "
    ::= { dtrCRFPortSpTreeEntry 7 }

dtrCRFPortSpTreeDesignatedBridge OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The unique Bridge or CRF Identifier of the Bridge or CRF believed to be the
          Designated Bridge for the LAN associated with the CRF Port "
    ::= { dtrCRFPortSpTreeEntry 8 }

dtrCRFPortSpTreeDesignatedPort OBJECT-TYPE
    SYNTAX PortId
--    Rsyntax OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The Port Identifier of the Bridge or CRF port believed to be the
          Designated Port for the LAN associated with the CRF Port "
    ::= { dtrCRFPortSpTreeEntry 9 }

dtrCRFPortSpTreeForwardTransitions OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of times this CRF Port, as identified by
          dtrCRFPortSpTreeNumber, has transitioned from the Learning
          state to the Forwarding State "
    ::= { dtrCRFPortSpTreeEntry 10 }

dtrFdbDynamicAddrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrFdbDynamicAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains information about specific dynamic MAC address
         entries in the CRF Filtering Database."
    ::= { dtrConcMIBForwarding 1 }

dtrFdbDynamicAddrEntry OBJECT-TYPE
    SYNTAX DtrFdbDynamicAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " CRF Filtering Database Dynamic MAC address entry"
    INDEX { dtrFdbDynamicAddrCRFIndex, dtrFdbDynamicAddrStnAddress }
    ::= { dtrFdbDynamicAddrTable 1 }

DtrFdbDynamicAddrEntry ::= SEQUENCE {
    dtrFdbDynamicAddrCRFIndex INTEGER,
    dtrFdbDynamicAddrStnAddress MacAddress,
    dtrFdbDynamicAddrPortNumber INTEGER,
    dtrFdbDynamicAddrStatus DynamicFdbStatus
    }

dtrFdbDynamicAddrCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrFdbDynamicAddrEntry 1 }

dtrFdbDynamicAddrStnAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " A unicast MAC address for which the CRF has forwarding
          information. This object is updated by the Learning Process in
          the CRF."
    ::= { dtrFdbDynamicAddrEntry 2 }

dtrFdbDynamicAddrPortNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number of the CRF Port that a frame with an
          address matching dtrFdbDynamicAddrStnAddress in this
          dtrFdbDynamicAddrTable Entry has been seen.  A value of zero
          is assigned when dtrFdbDynamicAddrStnAddress is known, but
          the CRF Port number (dtrFdbDynamicAddrPortNumber) has not
          been learned."
    ::= { dtrFdbDynamicAddrEntry 3 }

dtrFdbDynamicAddrStatus OBJECT-TYPE
    SYNTAX DynamicFdbStatus
--    Rsyntax INTEGER {
--        other(1),
--        invalid(2),
--        learned(3),
--        self(4),
--        mgmt(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " Status of this entry.  Other (1) indicates that some other
          MIB object is being used to determine how/if the frame is
          forwarded.  Invalid(2) indicates this entry is no longer
          valid, but has not been flushed from the table.  Learned(3)
          indicates that dtrFdbDynamicAddrPortNumber for this entry was
          learned.  Self(4) indicates dtrFdbDynamicAddrStnAddress
          represents one of the CRF Port Addresses.  Mgmt(5) indicates
          dtrFdbDynamicAddrStnAddress is also a value of an existing
          dtrFdbStaticAddrStnAddress"
    ::= { dtrFdbDynamicAddrEntry 4 }

dtrFdbStaticAddrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrFdbStaticAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains information about specific static MAC address
         entries in the CRF Filtering Database.       "
    ::= { dtrConcMIBForwarding 2 }

dtrFdbStaticAddrEntry OBJECT-TYPE
    SYNTAX DtrFdbStaticAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " CRF Filtering Database Static MAC Address Entry "
    INDEX { dtrFdbStaticAddrCRFIndex, dtrFdbStaticAddrStnAddress }
    ::= { dtrFdbStaticAddrTable 1 }

DtrFdbStaticAddrEntry ::= SEQUENCE {
    dtrFdbStaticAddrCRFIndex INTEGER,
    dtrFdbStaticAddrStnAddress MacAddress,
    dtrFdbStaticAddrRowStatus RowStatus,
    dtrFdbStaticAddrInMask OCTET STRING,
    dtrFdbStaticAddrOutMask OCTET STRING,
    dtrFdbStaticAddrStatus StaticFdbStatus
    }

dtrFdbStaticAddrCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrFdbStaticAddrEntry 1 }

dtrFdbStaticAddrStnAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The MAC address for this entry. It may include group or broadcast
          addresses."
    ::= { dtrFdbStaticAddrEntry 2 }

dtrFdbStaticAddrRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " Allows creation and deletion of static entries. "
    ::= { dtrFdbStaticAddrEntry 3 }

dtrFdbStaticAddrInMask OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The set of CRF Ports which receive frames with a
        destination address matching the address specified by the
        DtrFdbStaticAddrStnAddress in this entry that may forward
        this frame to any output CRF Port indicated by
        DtrFdbStaticAddrOutMask.  Each octet within the value of this
        object specifies a set of eight ports, with the first octet
        specifying CRF Ports 1 through 8, the second octet specifying
        CRF Ports 9 through 16 and so on.  Within each octet, the
        most significant bit represents the lowest numbered port,
        and the least significant bit represents the highest numbered
        port.  "
    ::= { dtrFdbStaticAddrEntry 4 }

dtrFdbStaticAddrOutMask OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The set of CRF Ports to which frames with a destination
          address matching the address specified by the
          DtrFdbStaticAddrStnAddress in this entry may be forwarded to.
          Each octet within the value of this object specifies a set of
          eight ports, with the first octet specifying CRF Ports 1
          through 8, the second octet specifying CRF Ports 9 through 16
          and so on.  Within each octet, the most significant bit
          represents the lowest numbered port, and the least
          significant bit represents the highest numbered port."
    ::= { dtrFdbStaticAddrEntry 5 }

dtrFdbStaticAddrStatus OBJECT-TYPE
    SYNTAX StaticFdbStatus
--    Rsyntax INTEGER {
--        other(1),
--        invalid(2),
--        permanent(3),
--        deleteOnReset(4)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " Status of this entry. Other(1) indicates this entry is currently
          in use under conditions different from the available status
          definitions that follow. Invalid(2) indicates this entry is no
          longer valid, but has not been flushed from the table.  Writing
          this value to the object removes the entry.  Permanent(3) indicates
          that the entry is currently in use and will remain so after the
          next reset.  DeleteOnReset(4) indicates the entry is currently in
          use and will remain so until the next reset. "
    ::= { dtrFdbStaticAddrEntry 6 }

dtrFdbDynamicRDTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrFdbDynamicRDEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains information about a specific dynamic route
         descriptor entry in the CRF Filtering Database.    "
    ::= { dtrConcMIBForwarding 3 }

dtrFdbDynamicRDEntry OBJECT-TYPE
    SYNTAX DtrFdbDynamicRDEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "      "
    INDEX { dtrFdbDynamicRDCRFIndex, dtrFdbDynamicRDRouteDesc }
    ::= { dtrFdbDynamicRDTable 1 }

DtrFdbDynamicRDEntry ::= SEQUENCE {
    dtrFdbDynamicRDCRFIndex INTEGER,
    dtrFdbDynamicRDRouteDesc RouteDescriptor,
    dtrFdbDynamicRDPortNumber INTEGER,
    dtrFdbDynamicRDStatus DynamicFdbStatus
    }

dtrFdbDynamicRDCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrFdbDynamicRDEntry 1 }

dtrFdbDynamicRDRouteDesc OBJECT-TYPE
    SYNTAX RouteDescriptor
--    Rsyntax OCTET STRING(SIZE(3))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " A Route Descriptor for which the CRF has forwarding
          information.  The Route Descriptor (RD) consists of 2 parts; a 4
          bit Bridge Number and a 12 bit LAN ID.  This identifies a bridge
          (BN) that has a port on the local LAN and a port connected to the
          indicated LAN ID.  This object consists of 3 octets.  The first
          octet contains the BN in the 4 least significant bits.  The
          second octet contains the most significant octet of the LAN ID
          and the final octet contains the least significant 4 bits of the
          LAN ID in the 4 most significant bits of the octet.  "
    ::= { dtrFdbDynamicRDEntry 2 }

dtrFdbDynamicRDPortNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number of the CRF Port that a frame with a
          Route Descriptor matching dtrFdbDynamicRDRouteDesc in this
          DtrFdbDynamicRDEntry has been seen.  A value of zero is
          assigned when dtrFdbDynamicRDRouteDesc is known, but the CRF
          Port number has not been learned "
    ::= { dtrFdbDynamicRDEntry 3 }

dtrFdbDynamicRDStatus OBJECT-TYPE
    SYNTAX DynamicFdbStatus
--    Rsyntax INTEGER {
--        other(1),
--        invalid(2),
--        learned(3),
--        self(4),
--        mgmt(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of this entry.  Other (1) indicates that some other
         MIB object is being used to determine how/if the frame is
         forwarded.  Invalid (2) indicates this entry is no longer
         valid, but has not been flushed from the table.  Learned (3)
         indicates that dtrFdbDynamicRDPortNumber for this entry was
         learned.  Self(4) indicates dtrFdbDynamicRDRouteDesc
         represents a relay across the Bridge relay function of this
         DTR Concentrator.  Mgmt(5) indicates dtrFdbDynamicRDRouteDesc
         is also a value of an existing dtrFdbStaticRDRouteDesc in the
         dtrFdbStaticRDTable."
    ::= { dtrFdbDynamicRDEntry 4 }

dtrFdbStaticRDTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrFdbStaticRDEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing information about specific static route
         descriptor entries in the CRF Filtering Database."
    ::= { dtrConcMIBForwarding 5 }

dtrFdbStaticRDEntry OBJECT-TYPE
    SYNTAX DtrFdbStaticRDEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "      "
    INDEX { dtrFdbStaticRDCRFIndex, dtrFdbStaticRDRouteDesc }
    ::= { dtrFdbStaticRDTable 1 }

DtrFdbStaticRDEntry ::= SEQUENCE {
    dtrFdbStaticRDCRFIndex INTEGER,
    dtrFdbStaticRDRouteDesc RouteDescriptor,
    dtrFdbStaticRDRowStatus RowStatus,
    dtrFdbStaticRDPortNumber INTEGER,
    dtrFdbStaticRDStatus StaticFdbStatus
    }

dtrFdbStaticRDCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrFdbStaticRDEntry 1 }

dtrFdbStaticRDRouteDesc OBJECT-TYPE
    SYNTAX RouteDescriptor
--    Rsyntax OCTET STRING(SIZE(3))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " Static Entries contain route descriptor information for
        internal Bridge Ports.  These entries are added as part of the
        initialization of the DTR Concentrator when an internal bridge
        relay function is enabled (dtrOperNumberOfBridgeRelays=1)
        The Route Descriptor (RD) consists of 2 parts; a
                   4 bit Bridge Number and a 12 bit LAN ID.  This identifies a
                   bridge (BN) that has a port on the local LAN and a port
                   connected to the indicated LAN ID.  This object consists of 3
                   octets.  The first octet contains the BN in the 4 least
                   significant bits.  The second octet contains the most
                   significant octet of the LAN ID and the final octet contains
                   the least significant 4 bits of the LAN ID in the 4 most
                   significant bits of the octet.  "
    ::= { dtrFdbStaticRDEntry 2 }

dtrFdbStaticRDRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Allows creation and deletion of static entries"
    ::= { dtrFdbStaticRDEntry 3 }

dtrFdbStaticRDPortNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number of the CRF Port that a frame with a
          Route Descriptor matching dtrFdbStaticRDRouteDesc in this
          DtrFdbStaticRDEntry is forwarded to."
    ::= { dtrFdbStaticRDEntry 4 }

dtrFdbStaticRDStatus OBJECT-TYPE
    SYNTAX StaticFdbStatus
--    Rsyntax INTEGER {
--        other(1),
--        invalid(2),
--        permanent(3),
--        deleteOnReset(4)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Status of this entry. Other (1) indicates this entry is currently
         in use under conditions different from the available status
         definitions that follow.  Invalid(2) indicates this entry is no
         longer valid, but has not been flushed from the table.  Writing
         this value to the object removes the entry. Permanent (3) indicates
         that the entry is currently in use and will remain so after the next
         reset. DeleteOnReset(4) indicates the entry is currently in use and
         will remain so until the next reset."
    ::= { dtrFdbStaticRDEntry 5 }

dtrMRITable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrMRIEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains information about the CRF port out
         mask for specific management functions.  "
    ::= { dtrConcMIBMRI 1 }

dtrMRIEntry OBJECT-TYPE
    SYNTAX DtrMRIEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "  "
    INDEX { dtrMRICRFIndex, dtrMRIMgmtType }
    ::= { dtrMRITable 1 }

DtrMRIEntry ::= SEQUENCE {
    dtrMRICRFIndex INTEGER,
    dtrMRIMgmtType INTEGER,
    dtrMRIOutMask OCTET STRING
    }

dtrMRICRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrMRIEntry 1 }

dtrMRIMgmtType OBJECT-TYPE
    SYNTAX INTEGER(0..15)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " Identifies the function class for this entry.  The MRI
          forwards frames with a destination class equal to
          dtrMRIMgmtType using the corresponding mask entry
          (dtrMRIOutMask).  When the destination class is 0 and the
          source class is not 0, the destination address in the MAC
          frame is used to forward the frame.  MAC frames with a
          destination class not found in this table are not forwarded
          by the MRI."
    ::= { dtrMRIEntry 2 }

dtrMRIOutMask OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " The set of CRF Ports to which frames with a destination
        class matching the function class specified by the
        dtrMRIMgmtType in this entry may be forwarded to.  Each octet
        within the value of this object specifies a set of eight
        ports, with the first octet specifying CRF Ports 1 through 8,
        the second octet specifying CRF Ports 9 through 16 and so on.
        Within each octet, the most significant bit represents the
        lowest numbered port, and the least significant bit
        represents the highest numbered port.  "
    ::= { dtrMRIEntry 3 }

dtrCRFPortStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DtrCRFPortStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " This table contains the counters for each CRF Port."
    ::= { dtrConcMIBStats 1 }

dtrCRFPortStatsEntry OBJECT-TYPE
    SYNTAX DtrCRFPortStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "      "
    INDEX { dtrCRFPortStatsCRFIndex, dtrCRFPortStatsPortNumber }
    ::= { dtrCRFPortStatsTable 1 }

DtrCRFPortStatsEntry ::= SEQUENCE {
    dtrCRFPortStatsCRFIndex INTEGER,
    dtrCRFPortStatsPortNumber INTEGER,
    dtrCRFPortStatsAreInFrames Counter32,
    dtrCRFPortStatsAreOutFrames Counter32,
    dtrCRFPortStatsInFrames Counter32,
    dtrCRFPortStatsOutFrames Counter32,
    dtrCRFPortStatsSrfInFrames Counter32,
    dtrCRFPortStatsSrfOutFrames Counter32,
    dtrCRFPortStatsSteInFrames Counter32,
    dtrCRFPortStatsSteOutFrames Counter32,
    dtrCRFPortStatsInvalidRI Counter32,
    dtrCRFPortStatsInMisdirected Counter32,
    dtrCRFPortStatsInDiscards Counter32
    }

dtrCRFPortStatsCRFIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF number identifying this instance of CRF "
    ::= { dtrCRFPortStatsEntry 1 }

dtrCRFPortStatsPortNumber OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        " The CRF Port number for which this entry contains CRF
          management information.  When the dtrCrfOperPortType
          indicates a C-Port, the C-Port number is found in
          dtrCRFPortConfigCPort."
    ::= { dtrCRFPortStatsEntry 2 }

dtrCRFPortStatsAreInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of ARE frames received at this CRF Port.  This
          count does not include ARE frames that have been misdirected
          (final Lan Id does not match the local Lan Id maintained by
          the CRF (dtrCRFLocalLanId))"
    ::= { dtrCRFPortStatsEntry 3 }

dtrCRFPortStatsAreOutFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of ARE frames transmitted by this CRF Port.
          This count does not include ARE frames that have been
          misdirected (final Lan Id does not match the Local Lan Id
          maintained by the CRF (dtrCRFLocalLanId)) "
    ::= { dtrCRFPortStatsEntry 4 }

dtrCRFPortStatsInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of valid frames received by this CRF Port "
    ::= { dtrCRFPortStatsEntry 5 }

dtrCRFPortStatsOutFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of frames that have been transmitted by this
          CRF Port.  "
    ::= { dtrCRFPortStatsEntry 6 }

dtrCRFPortStatsSrfInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of SRF frames that have been received by this
          CRF Port and forwarded to another port on the CRF."
    ::= { dtrCRFPortStatsEntry 7 }

dtrCRFPortStatsSrfOutFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of SRF frames that have been transmitted by this
          CRF Port."
    ::= { dtrCRFPortStatsEntry 8 }

dtrCRFPortStatsSteInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of STE frames received at this CRF Port.  This
          count does not include STE frames that have been misdirected
          (final Lan Id does not match the local Lan Id maintained by
          the CRF (dtrCRFLocalLanId)).  "
    ::= { dtrCRFPortStatsEntry 9 }

dtrCRFPortStatsSteOutFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of STE frames transmitted by this CRF Port.
          This count does not include STE frames that have been
          misdirected (final Lan Id does not match the local Lan Id
          maintained by the CRF (dtrCRFLocalLanId)).  "
    ::= { dtrCRFPortStatsEntry 10 }

dtrCRFPortStatsInvalidRI OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " Count of frames that were discarded due to a formatting error (i.e.
          an odd RI length, or 0 RI length) (Reference 802.1d C4.2.1.1.3)     "
    ::= { dtrCRFPortStatsEntry 11 }

dtrCRFPortStatsInMisdirected OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " This is a count of source routed frames that have been
          received at this CRF Port where the local Lan Id
          (dtrCRFLocalLanId) is not present or is not last (explorer
          frame).  Explorer frames (ARE and STE) are broadcast to all
          Forwarding CRF Ports.  SRF frames are discarded if the DA is
          specific and they are broadcast if the DA is multicast.  "
    ::= { dtrCRFPortStatsEntry 12 }

dtrCRFPortStatsInDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " The number of frames that have been discarded by the Forwarding
          Process.  This count may include frames that are discarded by the
          Frame Reception process "
    ::= { dtrCRFPortStatsEntry 13 }


END