OLD-CISCO-CHASSIS-MIB.mib object view, vendor Cisco
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file OLD-CISCO-CHASSIS-MIB and use it to monitor vendor specific OID's.
OLD-CISCO-CHASSIS-MIB file content
Object view of OLD-CISCO-CHASSIS-MIB:
| Scalar Object |
| chassisType |
.1.3.6.1.4.1.9.3.6.1 |
|
Chassis type.
|
| chassisVersion |
.1.3.6.1.4.1.9.3.6.2 |
|
Chassis hardware revision level, or an empty
string if unavailable.
|
| chassisId |
.1.3.6.1.4.1.9.3.6.3 |
|
Unique ID string. Defaults to chassis serial
number if available, otherwise empty. Can
also be set with 'snmp-server chassis-id'.
|
| romVersion |
.1.3.6.1.4.1.9.3.6.4 |
|
ROM monitor version.
|
| romSysVersion |
.1.3.6.1.4.1.9.3.6.5 |
|
ROM system software version, or an empty
string if unavailable.
|
| processorRam |
.1.3.6.1.4.1.9.3.6.6 |
|
Bytes of RAM available to CPU.
|
| nvRAMSize |
.1.3.6.1.4.1.9.3.6.7 |
|
Bytes of non-volatile configuration memory.
|
| nvRAMUsed |
.1.3.6.1.4.1.9.3.6.8 |
|
Bytes of non-volatile configuration memory
in use.
|
| configRegister |
.1.3.6.1.4.1.9.3.6.9 |
|
Value of configuration register.
|
| configRegNext |
.1.3.6.1.4.1.9.3.6.10 |
|
Value of configuration register at next
reload.
|
| cardTableEntry |
.1.3.6.1.4.1.9.3.6.11.1 |
|
Chassis card table.
|
| chassisSlots |
.1.3.6.1.4.1.9.3.6.12 |
|
Number of slots in this chassis, or -1 of
neither applicable nor determinable.
|
| cardIfIndexEntry |
.1.3.6.1.4.1.9.3.6.13.1 |
|
Chassis card table.
|
| chassisPartner |
.1.3.6.1.4.1.9.3.6.14 |
|
Used to determine if this is a partner
variant of a product.
|
| sysUpTimeAtLastChassisChange |
.1.3.6.1.4.1.9.3.6.15 |
|
Time in seconds/100 from the last cold
start to the last change in the chassis'
configuration. This value will be updated
whenever the chassis experiences a change
in the count, type, or slot position of
a card in cardTable.
|
| Tabular Object |
| cardIndex |
.1.3.6.1.4.1.9.3.6.11.1.1 |
|
Index into cardTable (not physical chassis
slot number).
|
| cardType |
.1.3.6.1.4.1.9.3.6.11.1.2 |
|
Functional type of this card.
|
| cardDescr |
.1.3.6.1.4.1.9.3.6.11.1.3 |
|
Text description of this card.
|
| cardSerial |
.1.3.6.1.4.1.9.3.6.11.1.4 |
|
The serial number of this card, or zero if
unavailable.
|
| cardHwVersion |
.1.3.6.1.4.1.9.3.6.11.1.5 |
|
Hardware revision level of this card, or an
empty string if unavailable.
|
| cardSwVersion |
.1.3.6.1.4.1.9.3.6.11.1.6 |
|
Version of the firmware or microcode
installed on this card, or an empty string if
unavailable.
|
| cardSlotNumber |
.1.3.6.1.4.1.9.3.6.11.1.7 |
|
Slot number relative to the containing card or
chassis, or -1 if neither applicable nor
determinable.
|
| cardContainedByIndex |
.1.3.6.1.4.1.9.3.6.11.1.8 |
|
cardIndex of the parent card which
directly contains this card, or 0 if
contained by the chassis, or -1 if not
applicable nor determinable.
|
| cardOperStatus |
.1.3.6.1.4.1.9.3.6.11.1.9 |
|
The operational status of the card.
cardOperStatus is up when a card is
recognized by the device and is enabled for
operation. cardOperStatus is down if the
card is not recognized by the device, or if
it is not enabled for operation.
cardOperStatus is standby if the card is
enabled and acting as a standby slave
|
| cardSlots |
.1.3.6.1.4.1.9.3.6.11.1.10 |
|
Number of slots on this card, or 0 if no
slots or not applicable, or -1 if not
determinable.
|
| cardIfIndex |
.1.3.6.1.4.1.9.3.6.13.1.1 |
|
matches RFC1213 ifTable IfIndex
|
| cardIfSlotNumber |
.1.3.6.1.4.1.9.3.6.13.1.2 |
|
Chassis slot number, or -1 if neither
applicable nor determinable.
|
| cardIfPortNumber |
.1.3.6.1.4.1.9.3.6.13.1.3 |
|
Chassis port number, unique per port on a
given card if available. If cardIfPortNumber is not
applicable to the card, then the object instance
won't be populated
|
| cardIfCardIndex |
.1.3.6.1.4.1.9.3.6.13.1.4 |
|
cardIndex of the card in the Chassis
cardTable which contains this interface, or -1 if
not applicable.
|
| cardIfConnectorTypeEnabled |
.1.3.6.1.4.1.9.3.6.13.1.5 |
|
Interface connector type currently
enabled. Value will be 1 if not known or not
used, or 2 if none of this ports' interface
connectors are enabled.
|
| Table |
| cardTable |
.1.3.6.1.4.1.9.3.6.11 |
|
Chassis card table.
|
| cardIfIndexTable |
.1.3.6.1.4.1.9.3.6.13 |
|
Chassis card table.
|
| Object Identifier |
| chassis |
.1.3.6.1.4.1.9.3.6 |
