AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | Infra | IoT | IT Service | Linux | Network/System | Performance | Protocol | SaaS | Security | Service Level | SNMP | Storage | VMware | VoIP | Web | Wireless

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Cisco » OLD-CISCO-FLASH-MIB » Objects

OLD-CISCO-FLASH-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file OLD-CISCO-FLASH-MIB and use it to monitor vendor specific OID's.

OLD-CISCO-FLASH-MIB file content

Object view of OLD-CISCO-FLASH-MIB:

Scalar Object
flashSize .1.3.6.1.4.1.9.2.10.1
Total Size in Octets of Flash memory
flashFree .1.3.6.1.4.1.9.2.10.2
Unused Size in Octets of Flash memory
flashController .1.3.6.1.4.1.9.2.10.3
Provides the type of Flash controller (either CCTL or CCTL2) installed in the router.
flashCard .1.3.6.1.4.1.9.2.10.4
Provides the type of Flash Card installed in the router. For example, the type of Flash Card could be either CSC-MS or CSC-MC+.
flashVPP .1.3.6.1.4.1.9.2.10.5
State of the VPP DIP jumper on the Flash memory card. Files can be written to the Flash memory card only if the VPP DIP jumper is turned on.
flashErase .1.3.6.1.4.1.9.2.10.6
Request to erase flash memory
flashEraseTime .1.3.6.1.4.1.9.2.10.7
Indicates the value of sysUptime the last time Flash memory was erased. If the flash had not been erased after powerup it has a value of 0 days 00:00:00.
flashEraseStatus .1.3.6.1.4.1.9.2.10.8
Status of current or last flash erasing
flashToNet .1.3.6.1.4.1.9.2.10.9
Write flash entry to tftp server. Value should be the name of the flash entry to send. Instance is the IP address of the tftp host.
flashToNetTime .1.3.6.1.4.1.9.2.10.10
Indicates the value of sysUpTime the last time a file was transfered from Flash memory on the router to a TFTP host. Returns 0 days 00:00:00 if there had been no transfer since powerup.
flashToNetStatus .1.3.6.1.4.1.9.2.10.11
Status of current or last flash to net transfer
netToFlash .1.3.6.1.4.1.9.2.10.12
Write flash entry from tftp server. Value should be the name of the flash entry to write. Instance is the IP address of the tftp host.
netToFlashTime .1.3.6.1.4.1.9.2.10.13
Indicates the value of sysUpTime the last time file was copied from a Trivial File Transfer Protocol(TFTP) server to the Flash memory on the router. Returns 0 days 00:00:00 if there had been no transfers since powerup.
netToFlashStatus .1.3.6.1.4.1.9.2.10.14
Status of current or last net to flash transfer
flashStatus .1.3.6.1.4.1.9.2.10.15
Status of the availability of flash
flashEntries .1.3.6.1.4.1.9.2.10.16
Number of entries in the flash directory
lflashFileDirEntry .1.3.6.1.4.1.9.2.10.17.1
A collection of flash eprom objects
Tabular Object
flashDirName .1.3.6.1.4.1.9.2.10.17.1.1
Name associated with the flash entry
flashDirSize .1.3.6.1.4.1.9.2.10.17.1.2
Size in Octets of a flash entry
flashDirStatus .1.3.6.1.4.1.9.2.10.17.1.3
Indicates the status of the entry
Table
lflashFileDirTable .1.3.6.1.4.1.9.2.10.17
A list of flash file entries.
Object Identifier
lflash .1.3.6.1.4.1.9.2.10