cisco-atm-service-registry-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-atm-service-registry-mib and use it to monitor vendor specific OID's.
cisco-atm-service-registry-mib file content
Object view of cisco-atm-service-registry-mib:
| Scalar Object |
| asrSrvcRegEntry |
.1.3.6.1.4.1.9.9.50.1.1.1 |
|
Information about a single service provider that is
to be made available to the user-side of one or more
ATM UNIs. An entry, for which asrSrvcRegPort has a
non-zero value, is a specific assignment to that UNI;
an entry for which asrSrvcRegPort is zero applies to
all UNIs for which this table contains no specific
assignments.
|
| Tabular Object |
| asrSrvcRegPort |
.1.3.6.1.4.1.9.9.50.1.1.1.1 |
|
Either the value 0, or the ifIndex value of an
the ATM Interface. A row for which this object has a
non-zero value is a specific assignment to that UNI;
a row for which this object is zero applies to
all UNIs for which this table contains no specific
assignments.
Some switches may only support this object with the
value of zero.
|
| asrSrvcRegServiceID |
.1.3.6.1.4.1.9.9.50.1.1.1.2 |
|
The service identifier which uniquely identifies
the type of service at the address given by the
corresponding value of asrSrvcRegATMAddress.
Specific values for this identifier are defined in
the ILMI specification (e.g., asrSrvcRegLecs) or
elsewhere.
|
| asrSrvcRegAddressIndex |
.1.3.6.1.4.1.9.9.50.1.1.1.4 |
|
An arbitrary integer to differentiate multiple rows
containing different ATM addresses for the same service
on the same UNI.
|
| asrSrvcRegATMAddress |
.1.3.6.1.4.1.9.9.50.1.1.1.3 |
|
An ATM address to which the ATM end-system on this
UNI can attempt to establish a connection for the
service.
|
| asrSrvcRegParm1 |
.1.3.6.1.4.1.9.9.50.1.1.1.5 |
|
An octet string used according to the value of
asrSrvcRegServiceID.
|
| asrSrvcRegRowStatus |
.1.3.6.1.4.1.9.9.50.1.1.1.6 |
|
The status of this row. No object in the row can
be modified while the value of this object is
'active'.
|
| Table |
| asrSrvcRegTable |
.1.3.6.1.4.1.9.9.50.1.1 |
|
The table implemented by an ATM switch to allow
monitoring and control of the ATM addresses of
registered services which it makes avaiable to ATM
end-systems via the ILMI across its UNIs.
|
| Object Identifier |
| ciscoAtmServiceRegistryMIB |
.1.3.6.1.4.1.9.9.50 |
|
A MIB module to allow an NMS to monitor and
configure the information which an ATM switch
makes available via the ILMI's Service Registry
Table.
|
| ciscoAtmServiceRegistryMIBObjects |
.1.3.6.1.4.1.9.9.50.1 |
| asrSrvcRegMIBConformance |
.1.3.6.1.4.1.9.9.50.3 |
| asrSrvcRegMIBCompliances |
.1.3.6.1.4.1.9.9.50.3.1 |
| asrSrvcRegMIBGroups |
.1.3.6.1.4.1.9.9.50.3.2 |
| Group |
| asrSrvcRegMIBGroup |
.1.3.6.1.4.1.9.9.50.3.2.1 |
|
A collection of objects providing monitoring and
control of ATM addresses of services which an ATM
switch is to make available via the ILMI.
|
