cisco-ds0-cross-connect-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-ds0-cross-connect-mib and use it to monitor vendor specific OID's.
cisco-ds0-cross-connect-mib file content
Object view of cisco-ds0-cross-connect-mib:
| Scalar Object |
| cds0CrossConnectConfigEntry |
.1.3.6.1.4.1.9.9.9999.1.1.1.1 |
|
An entry in cds0CrossConnectConfigTable table represents a DS0
cross connection. The two end point of the connection are:
end point 1: cds0Endpt1Ds1 cds0Endpt1Ds0Group
end point 2: cds0Endpt2Ds1 cds0Endpt2Ds0Group
The end points of this connection should be entries
of ccasGrpCfgTable and 'ccasGrpCfgServiceType' of
of the entries should be 'tdmxconn'. The ccasGrpCfgTable is
defined in CISCO-CAS-IF-MIB.
|
| Tabular Object |
| cds0Endpt1Ds1 |
.1.3.6.1.4.1.9.9.9999.1.1.1.1.1 |
|
The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the first end point of the
Ds0 connection.
|
| cds0Endpt1Ds0Group |
.1.3.6.1.4.1.9.9.9999.1.1.1.1.2 |
|
The value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt1Ds1'.
This Ds0 group is used as the first end point of the
Ds0 connection.
|
| cds0Endpt2Ds1 |
.1.3.6.1.4.1.9.9.9999.1.1.1.1.3 |
|
The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the second end point of the
Ds0 connection.
|
| cds0Endpt2Ds0Group |
.1.3.6.1.4.1.9.9.9999.1.1.1.1.4 |
|
The value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt2Ds1'.
This Ds0 group is used as the second end point of the
Ds0 connection.
|
| cds0ConnRowStatus |
.1.3.6.1.4.1.9.9.9999.1.1.1.1.5 |
|
This object is used to create or delete an entry.
The mandatory objects for creating an entry in this table:
'cds0Endpt2Ds1'
'cds0Endpt2Ds0Group'
The following objects are not allowed to be modified after
the entry to be added:
'cds0Endpt2Ds1'
'cds0Endpt2Ds0Group'
|
| Table |
| cds0CrossConnectConfigTable |
.1.3.6.1.4.1.9.9.9999.1.1.1 |
|
This table is used to establish a DS0 cross connection.
A DS0 cross connect is established by binding a unique
DS0 group containing one or more DS0s of a single Ds1
interface to another unique DS0 group containing one or
more DS0s of a single DS1 interface.
|
| Object Identifier |
| ciscoDs0CrossConnectMIB |
.1.3.6.1.4.1.9.9.9999 |
|
The MIB for Ds0 cross connection.
|
| ciscoDs0CrossConnectMIBNotifs |
.1.3.6.1.4.1.9.9.9999.0 |
| ciscoDs0CrossConnectMIBObjects |
.1.3.6.1.4.1.9.9.9999.1 |
| ciscoDs0CrossConnectMIBConformance |
.1.3.6.1.4.1.9.9.9999.2 |
| cDs0CrossConnectConfig |
.1.3.6.1.4.1.9.9.9999.1.1 |
| ciscoDs0CrossConnectMIBCompliances |
.1.3.6.1.4.1.9.9.9999.2.1 |
| ciscoDs0CrossConnectMIBGroups |
.1.3.6.1.4.1.9.9.9999.2.2 |
| Group |
| cDs0CrossConnectConfigGroup |
.1.3.6.1.4.1.9.9.9999.2.2.1 |
|
A collection of objects for general configuration of
Ds0 cross connection.
|
