cisco-ds0bundle-ext-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-ds0bundle-ext-mib and use it to monitor vendor specific OID's.
cisco-ds0bundle-ext-mib file content
Object view of cisco-ds0bundle-ext-mib:
| Scalar Object |
| cdsx0BundleExtEntry |
.1.3.6.1.4.1.9.10.33.1.1.1.1 |
|
Contains objects to configure a ds0Bundle.
The values of objects cdsx0BundleExtDs1Index and
cdsx0BundleExtChannelMap must be specified for
the associated row to become active.
|
| cdsx0BundleUseEntry |
.1.3.6.1.4.1.9.10.33.1.2.1.1 |
|
Contains the ds0 timeslots that are currently
part of various ds0 bundles on the DS1 line
identified by the ifIndex.
This information can be useful for an NMS when
creating new ds0 bundles on this DS1.
|
| Tabular Object |
| cdsx0BundleExtDs1Index |
.1.3.6.1.4.1.9.10.33.1.1.1.1.1 |
|
The ifIndex of the DS1 line containing the ds0
timeslots in this bundle.
The ds0 bundle interface is layered on top of
the DS1 line. This layering is represented in
the ifStackTable.
This object is not instantiated until the value
is specified.
The value may be set only when the ds0 bundle
is created.
|
| cdsx0BundleExtChannelMap |
.1.3.6.1.4.1.9.10.33.1.1.1.1.2 |
|
A list of ds0 timeslots that comprise this ds0
bundle.
This object is not instantiated until the value
is specified.
The value may be set only when the ds0 bundle is
created.
|
| cdsx0BundleExtEncapType |
.1.3.6.1.4.1.9.10.33.1.1.1.1.3 |
|
The type of encapsulation for this bundle.
A ds0 bundle is a logical serial port.
Setting this object defines the type of the serial
port.
If not specified, the value is none(1),
indicating that the encapsulation type on this
serial port is not defined.
If the value is changed to atmFuni(2), the
agent will create an entry in the ifTable with
ifType equal to atmFuni(106). If the value is
changed to frameRelay(3), the agent will create
an entry in the ifTable with ifType equal to
frameRelayService(44).
The new atmFuni or frameRelayService interface
is layered on top of the ds0 bundle interface.
This layering will be represented in the
ifStackTable.
The value of this object can be changed only if
the ifOperStatus of the associated atmFuni or
frameRelayService interface is down.
When the value is changed, the agent removes
all existing connections on the interface, and
also deletes the ifEntry that was created
because of the previous value.
|
| cdsx0BundleExtChannelRate |
.1.3.6.1.4.1.9.10.33.1.1.1.1.4 |
|
The data rate of each ds0 in this bundle.
rate56 - 56kb/s
rate64 - 64kb/s
For ds0's on a T1 line, the value should be
rate56(1) if 'robbed bit' signaling is used,
and rate64(2) if clear channel signaling is
used.
For ds0's on a E1 line, the value should always
be rate64(2).
The value can be set only when the entry is
created.
|
| cdsx0BundleUseDs0Used |
.1.3.6.1.4.1.9.10.33.1.2.1.1.1 |
|
A list of ds0 timeslots on this DS1 line that
are currently in use, i.e., are part of some ds0
bundle.
|
| Table |
| cdsx0BundleExtTable |
.1.3.6.1.4.1.9.10.33.1.1.1 |
|
This table is used to supplement the
dsx0BundleTable.
|
| cdsx0BundleUseTable |
.1.3.6.1.4.1.9.10.33.1.2.1 |
|
Shows the ds0 timeslots that are currently in
use (i.e., part of a ds0 bundle) on
channelized DS1 lines.
There is an entry in this table for each
channelized DS1 line which has an ifEntry.
|
| Object Identifier |
| ciscoDs0BundleExtMIB |
.1.3.6.1.4.1.9.10.33 |
|
The MIB module for managing DS0 Bundles.
This MIB contains additional objects to supplement the
the IETF draft ds0Bundle MIB.
|
| ciscoDs0BundleExtMIBObjects |
.1.3.6.1.4.1.9.10.33.1 |
| cdsx0BundleConfig |
.1.3.6.1.4.1.9.10.33.1.1 |
| cdsx0BundleInfo |
.1.3.6.1.4.1.9.10.33.1.2 |
| ciscoDs0BundleExtMIBConformance |
.1.3.6.1.4.1.9.10.33.3 |
| ciscoDs0BundleExtMIBCompliances |
.1.3.6.1.4.1.9.10.33.3.1 |
| ciscoDs0BundleExtMIBGroups |
.1.3.6.1.4.1.9.10.33.3.2 |
| Group |
| ciscoDs0BundleExtConfigGroup |
.1.3.6.1.4.1.9.10.33.3.2.1 |
|
A collection of objects providing the ability to
configure a ds0 bundle.
|
| ciscoDs0BundleExtInfoGroup |
.1.3.6.1.4.1.9.10.33.3.2.2 |
|
A collection of objects providing information
about which ds0 timeslots are in ds0 bundles.
|
