cisco-dynamic-arp-inspection-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-dynamic-arp-inspection-mib and use it to monitor vendor specific OID's.
cisco-dynamic-arp-inspection-mib file content
Object view of cisco-dynamic-arp-inspection-mib:
| Scalar Object |
| cdaiLoggingEnable |
.1.3.6.1.4.1.9.9.374.1.1.1 |
|
This object indicates whether the Dynamic ARP Inspection
logging is enabled on the device.
If this object is set to 'true', Dynamic ARP Inspection
logging is enabled.
If this object is set to 'false', Dynamic ARP Inspection
loging is disabled.
|
| cdaiVlanConfigEntry |
.1.3.6.1.4.1.9.9.374.1.2.1.1 |
|
A row instance contains the configuration to enable
or disable Dynamic ARP Inspection at each existing VLAN.
|
| cdaiIfConfigEntry |
.1.3.6.1.4.1.9.9.374.1.3.1.1 |
|
A row instance contains the configuration to enable or
disable trust state for Dynamic ARP Inspection at each
physical interface capable of this feature.
|
| cdaiIfRateLimitEntry |
.1.3.6.1.4.1.9.9.374.1.3.2.1 |
|
A row instance contains the configuration of rate limit
Dynamic ARP Inspection at each physical interface capable
of this feature.
|
| Tabular Object |
| cdaiVlanIndex |
.1.3.6.1.4.1.9.9.374.1.2.1.1.1 |
|
This object indicates the VLAN number on which Dynamic ARP
Inspection feature is configured.
|
| cdaiVlanDynArpInspEnable |
.1.3.6.1.4.1.9.9.374.1.2.1.1.2 |
|
This object indicates whether Dynamic ARP Inspection is
enabled in this VLAN.
If this object is set to 'true', Dynamic ARP Inspection
is enabled.
If this object is set to 'false', Dynamic ARP Inspection
is disabled.
|
| cdaiIfTrustEnable |
.1.3.6.1.4.1.9.9.374.1.3.1.1.1 |
|
This object indicates whether the interface is trusted for
Dynamic ARP Inspection purpose.
If this object is set to 'true', the interface is trusted.
ARP packets coming to this interface will be forwarded
without checking.
If this object is set to 'false', the interface is not
trusted. ARP packets coming to this interface will be
subjected to ARP inspection.
|
| cdaiIfRateLimit |
.1.3.6.1.4.1.9.9.374.1.3.2.1.1 |
|
This object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets
exceeds the value of this object, ARP packets will be
dropped.
|
| Table |
| cdaiVlanConfigTable |
.1.3.6.1.4.1.9.9.374.1.2.1 |
|
A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
|
| cdaiIfConfigTable |
.1.3.6.1.4.1.9.9.374.1.3.1 |
|
A table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).
|
| cdaiIfRateLimitTable |
.1.3.6.1.4.1.9.9.374.1.3.2 |
|
A table provides the mechanism to configure the rate limit
for Dynamic ARP Inspection purpose at each physical interface
capable of this feature.
|
| Object Identifier |
| ciscoDynamicArpInspectionMIB |
.1.3.6.1.4.1.9.9.374 |
|
The MIB module is for configuration of Dynamic ARP Inspection
feature. Dynamic ARP Inspection is a security mechanism which
validate ARP packets seen on access ports.
|
| cdaiMIBNotifs |
.1.3.6.1.4.1.9.9.374.0 |
| cdaiMIBObjects |
.1.3.6.1.4.1.9.9.374.1 |
| cdaiMIBConformance |
.1.3.6.1.4.1.9.9.374.2 |
| cdaiGlobal |
.1.3.6.1.4.1.9.9.374.1.1 |
| cdaiVlan |
.1.3.6.1.4.1.9.9.374.1.2 |
| cdaiInterface |
.1.3.6.1.4.1.9.9.374.1.3 |
| cdaiMIBCompliances |
.1.3.6.1.4.1.9.9.374.2.1 |
| cdaiMIBGroups |
.1.3.6.1.4.1.9.9.374.2.2 |
| Group |
| cdaiVlanConfigGroup |
.1.3.6.1.4.1.9.9.374.2.2.2 |
|
A collection of object which are used to configure as
well as show information regarding the Dynamic ARP
Inspection feature per VLAN.
|
| cdaiIfConfigGroup |
.1.3.6.1.4.1.9.9.374.2.2.3 |
|
A collection of object which are used to configure as
well as show information regarding the interface trust
state for Dynamic ARP Inspection purpose.
|
| cdaiGlobalLoggingGroup |
.1.3.6.1.4.1.9.9.374.2.2.1 |
|
A collection of object which is used to configure Dynamic
ARP Inspection logging.
|
| cdaiIfRateLimitGroup |
.1.3.6.1.4.1.9.9.374.2.2.4 |
|
A collection of object which are used to configure as
well as show information regarding the rate limit per
interface for Dynamic ARP Inspection purpose.
|
