| cfmFcipEntityExtTcpKeepAliveTO |
.1.3.6.1.4.1.9.9.329.1.1.1.1.1 |
|
The TCP Keep alive timeout for all links within this
entity.
|
| cfmFcipEntityExtTcpMaxReTx |
.1.3.6.1.4.1.9.9.329.1.1.1.1.2 |
|
The Maximum number of times that the same item of data
will be retransmitted over a TCP connection. If delivery
is not acknowledged after this number of retransmissions
then the TCP connection is terminated.
|
| cfmFcipEntityExtPMTUEnable |
.1.3.6.1.4.1.9.9.329.1.1.1.1.3 |
|
The path MTU discovery is enabled if the value of
this object is true(1), else it is disabled, and
has the value false(2).
|
| cfmFcipEntityExtPMTUResetTO |
.1.3.6.1.4.1.9.9.329.1.1.1.1.4 |
|
The time interval for which the discovered pathMTU
is valid, before MSS reverts back to the negotiated
TCP value. This object is writeble only if
cfmFcipEntityExtPMTUEnable is 'true'.
|
| cfmFcipEntityExtTcpMinRTO |
.1.3.6.1.4.1.9.9.329.1.1.1.1.5 |
|
The TCP minimum retransmit timeout for all the links on
this entity.
|
| cfmFcipEntityExtTcpSendBufSize |
.1.3.6.1.4.1.9.9.329.1.1.1.1.6 |
|
The aggregate TCP send window for all TCP connections on all
Links within this entity. This value is used for Egress
Flow Control. When the aggregate of the data queued
on all connections within this entity reaches this value,
the sender is flow controlled.
|
| cfmFcipEntityExtTcpMaxBW |
.1.3.6.1.4.1.9.9.329.1.1.1.1.7 |
|
This is an estimate of the Bandwidth of the network pipe
used for the B-D product computation, which lets us derive
the TCP receive window to advertise.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.
|
| cfmFcipEntityExtTcpMinAvailBW |
.1.3.6.1.4.1.9.9.329.1.1.1.1.8 |
|
The minimum avilable bandwidth for the TCP connections
on the Links within this entity.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.
|
| cfmFcipEntityExtTcpRndTrpTimeEst |
.1.3.6.1.4.1.9.9.329.1.1.1.1.9 |
|
This is an estimate of the round trip delay of the network
pipe used for the B-D product computation, which lets us
derive the TCP receive window to advertise.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.
|
| cfmFcipLinkExtPassiveMode |
.1.3.6.1.4.1.9.9.329.1.1.2.1.1 |
|
If the value is set to 'false' this link endpoint actively
tries to connect to the peer. If it is set to 'true' the link
endpoint waits for the peer to connect to it.
|
| cfmFcipLinkExtNumTcpConn |
.1.3.6.1.4.1.9.9.329.1.1.2.1.2 |
|
The maximum number of TCP connections allowed on this
link.
|
| cfmFcipLinkExtCheckTimestamp |
.1.3.6.1.4.1.9.9.329.1.1.2.1.3 |
|
The value is 'true', if the timestamp in FCIP header
is to checked. If 'false' the timestamp is ignored.
|
| cfmFcipLinkExtTimestampTolerance |
.1.3.6.1.4.1.9.9.329.1.1.2.1.4 |
|
The accepted time difference between the local time
and the timestamp value received in the FCIP header.
By default this value will be EDTOV/2. EDTOV is the
Error_Detect_Timeout Value used for Fibre channel Ports
as the timeout value for detecting an error condition.
|
| cfmFcipLinkExtTcpRemPort |
.1.3.6.1.4.1.9.9.329.1.1.2.1.5 |
|
The remote TCP port to which the local FCIP entity will
connect if and when it initiates a TCP connection setup
for this link.
|
| cfmFcipLinkExtLocalBPortEnable |
.1.3.6.1.4.1.9.9.329.1.1.2.1.6 |
|
If the value is set to 'true', the B port mode is enabled
on the local FCIP link. If set to 'false' the B port mode
is disabled.
|
| cfmFcipLinkExtSpecialFrameEnable |
.1.3.6.1.4.1.9.9.329.1.1.2.1.7 |
|
If the value is set to 'true', the TCP active opener
initiates FCIP special frames and the TCP passive
opener responds to the FCIP special frames.
If it is set to 'false', the FCIP special frames are
neither generated nor responded to.
|
| cfmFcipLinkExtBPortKAEnable |
.1.3.6.1.4.1.9.9.329.1.1.2.1.8 |
|
If the value is set to 'true', a message is
sent in response to a (Fibre Channel) ELS Echo
frame received from the peer. Some B Port
implementations use ELS Echo request/response frames
as Link Keep Alive.
If it is set to 'false', this response is not
generated.
This object is valid only if the
cfmFcipLinkExtLocalBPortEnable is 'true'.
|
| cfmFcipLinkExtCntrlQOSField |
.1.3.6.1.4.1.9.9.329.1.1.2.1.9 |
|
The value to be set for the TOS field in IP header
for the TCP control connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set request. SET operation would
fail if this object is set individually.
|
| cfmFcipLinkExtDataQOSField |
.1.3.6.1.4.1.9.9.329.1.1.2.1.10 |
|
The value to be set for the TOS field in IP header
for the TCP Data connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set request. SET operation would
fail if this object is set individually.
|
| cfmFcipLinkExtEthIfIndex |
.1.3.6.1.4.1.9.9.329.1.1.2.1.11 |
|
The ifIndex of the interface on which this FCIP link was
initiated.
|
| cfmFcipLinkExtWriteAccelerator |
.1.3.6.1.4.1.9.9.329.1.1.2.1.12 |
|
The Write accelerator allows for enhancing SCSI write
performance.
If 'true', the FCIP Write accelerator is enabled on this link
If 'false' it is disabled.
|
| cfmFcipLinkExtIPComp |
.1.3.6.1.4.1.9.9.329.1.1.2.1.13 |
|
The configuration for the IP compression.
'none' - ip compression is disabled.
'highCompressionRatio' - indicates better compression
performance at the cost of lower throughput.
'highThroughput' - indicates better throughput at
the cost of lower compression performance.
|
