cisco-fdmi-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-fdmi-mib and use it to monitor vendor specific OID's.
cisco-fdmi-mib file content
Object view of cisco-fdmi-mib:
| Scalar Object |
| cfdmiRejectRegNotifyEnable |
.1.3.6.1.4.1.9.9.373.1.1.1 |
|
This object specifies if the FDMI should
generate 'cfdmiRejectRegNotify' notifications.
If value of this object is 'true', then the
notification is generated when a registration request is
rejected.
If it is 'false', the notification is not generated.
|
| cfdmiHbaInfoEntry |
.1.3.6.1.4.1.9.9.373.1.2.1.1 |
|
An entry (conceptual row) in the cfdmiHbaInfoTable. It
provides information that has been registered with FDMI
by a HBA, identified by cfdmiHbaInfoId, where the
registration was received on the VSAN identified by
vsanIndex.
If the HBA has registered some but not all of the
information represented by the columnar objects in this
table, then the value of the unregistered objects will
be either: the zero-length string (for string-based
objects) or the zero value (for interger-based objects).
|
| cfdmiHbaPortEntry |
.1.3.6.1.4.1.9.9.373.1.2.2.1 |
|
An entry (conceptual row) in the cfdmiHbaPortTable. It
contains information about the Nx_port, on this HBA,
identified by cfdmiHbaInfoId, where the registration
of the HBA with FDMI was received on the VSAN identified
by vsanIndex.
If the HBA has registered some but not all of the
information represented by the columnar objects in this
table, then the value of the unregistered objects will
be either: the zero-length string (for string-based
objects) or the zero value (for interger-based objects).
|
| cfdmiRejectReasonCode |
.1.3.6.1.4.1.9.9.373.1.2.3 |
|
The registration reject reason code. This object
contains the reason code corresponding to the most
recent FDMI Registration request failure.
|
| cfdmiRejectReasonCodeExpl |
.1.3.6.1.4.1.9.9.373.1.2.4 |
|
The registration reject reason code explanation. This
object contains the reason code explanation if the
above object has a reason code corresponding to
'Unable to perform command request'. This object like
the one above, corresponds to the most recent FDMI
Registration request rejection.
|
| cfdmiNotifyRegOperType |
.1.3.6.1.4.1.9.9.373.1.2.5 |
|
The type of registration operation.
'regHBA' - register HBA.
'regHAT' - register HBA attributes.
'regPRT' - register port.
'regPA' - register port attributes.
|
| cfdmiNotifyHBAPortId |
.1.3.6.1.4.1.9.9.373.1.2.6 |
|
The identifier to be sent in cfdmiRejectRegNotify.
The value of this object would be HBA identifier if
the value of 'notifyRegOperType' is either 'regHBA' or
'regHAT'. The value of this object would be port
identifier if the value of 'notifyRegOperType' is either
'regPRT' or 'regPA'.
|
| Tabular Object |
| cfdmiHbaInfoId |
.1.3.6.1.4.1.9.9.373.1.2.1.1.1 |
|
The WWN of this HBA.
|
| cfdmiHbaInfoNodeName |
.1.3.6.1.4.1.9.9.373.1.2.1.1.2 |
|
The WWN of the node containing this HBA.
|
| cfdmiHbaInfoMfg |
.1.3.6.1.4.1.9.9.373.1.2.1.1.3 |
|
The name of the manufacturer of this HBA.
|
| cfdmiHbaInfoSn |
.1.3.6.1.4.1.9.9.373.1.2.1.1.4 |
|
The serial number of this HBA.
|
| cfdmiHbaInfoModel |
.1.3.6.1.4.1.9.9.373.1.2.1.1.5 |
|
The model of this HBA.
|
| cfdmiHbaInfoModelDescr |
.1.3.6.1.4.1.9.9.373.1.2.1.1.6 |
|
The string that describes the model of this HBA.
|
| cfdmiHbaInfoHwVer |
.1.3.6.1.4.1.9.9.373.1.2.1.1.7 |
|
The hardware version of this HBA.
|
| cfdmiHbaInfoDriverVer |
.1.3.6.1.4.1.9.9.373.1.2.1.1.8 |
|
The version level of the driver software controlling
this HBA.
|
| cfdmiHbaInfoOptROMVer |
.1.3.6.1.4.1.9.9.373.1.2.1.1.9 |
|
The version of the Option ROM or the BIOS of this HBA.
|
| cfdmiHbaInfoFwVer |
.1.3.6.1.4.1.9.9.373.1.2.1.1.10 |
|
The version of the firmware executed by this HBA.
|
| cfdmiHbaInfoOSInfo |
.1.3.6.1.4.1.9.9.373.1.2.1.1.11 |
|
The type and version of the operating system
controlling this HBA.
|
| cfdmiHbaInfoMaxCTPayload |
.1.3.6.1.4.1.9.9.373.1.2.1.1.12 |
|
The maximum size of the Common Transport (CT) payload
including all CT headers but no FC frame header(s),
that may be send or received by application software
resident in the host containing this HBA.
|
| cfdmiHbaPortId |
.1.3.6.1.4.1.9.9.373.1.2.2.1.1 |
|
The WWN of this port.
|
| cfdmiHbaPortSupportedFC4Type |
.1.3.6.1.4.1.9.9.373.1.2.2.1.2 |
|
The supported FC-4 types attribute registered for this
port on this VSAN.
|
| cfdmiHbaPortSupportedSpeed |
.1.3.6.1.4.1.9.9.373.1.2.2.1.3 |
|
The supported speed registered for this port on this
VSAN.
|
| cfdmiHbaPortCurrentSpeed |
.1.3.6.1.4.1.9.9.373.1.2.2.1.4 |
|
The current speed registered for this port on this
VSAN.
|
| cfdmiHbaPortMaxFrameSize |
.1.3.6.1.4.1.9.9.373.1.2.2.1.5 |
|
The maximum frame size attribute registered for this
port on this VSAN.
|
| cfdmiHbaPortOsDevName |
.1.3.6.1.4.1.9.9.373.1.2.2.1.6 |
|
The OS Device Name attribute registered for this port
on this VSAN.
|
| cfdmiHbaPortHostName |
.1.3.6.1.4.1.9.9.373.1.2.2.1.7 |
|
The name of the host associated with this port.
|
| Table |
| cfdmiHbaInfoTable |
.1.3.6.1.4.1.9.9.373.1.2.1 |
|
This table lists all the HBAs registered with the
Fabric Device Management Interface.
|
| cfdmiHbaPortTable |
.1.3.6.1.4.1.9.9.373.1.2.2 |
|
List of ports registered with Fibre Channel Device
Management Interface.
|
| Trap |
| cfdmiRejectRegNotify |
.1.3.6.1.4.1.9.9.373.0.1 |
|
This notification is generated by the FDMI
whenever it rejects a registration request. The FDMI
should update the 'cfdmiRejectReasonCode' and
'cfdmiRejectReasonCodeExpl' objects with
the corresponding reason code and reason code
explanation before sending the notification. These
two objects are also included along with the
notification to provide the reason for the reject.
|
| Object Identifier |
| ciscoFdmiMIB |
.1.3.6.1.4.1.9.9.373 |
|
Fabric Device Management Interface (FDMI) MIB. This MIB
module defines objects for managing the devices such as
HBA (Host Bus Adapter). It provides device information
which have registered with an FC fabric using FDMI.
For more information on FDMI, refer to Fibre Channel
Generic Services-4 Section 6.7 : Fabric Device
Management Interface.
|
| ciscoFdmiMIBNotifications |
.1.3.6.1.4.1.9.9.373.0 |
| ciscoFdmiMIBObjects |
.1.3.6.1.4.1.9.9.373.1 |
| ciscoFdmiMIBConformance |
.1.3.6.1.4.1.9.9.373.2 |
| cfdmiConfig |
.1.3.6.1.4.1.9.9.373.1.1 |
| cfdmiInfo |
.1.3.6.1.4.1.9.9.373.1.2 |
| cfdmiStatistics |
.1.3.6.1.4.1.9.9.373.1.3 |
| ciscoFdmiMIBCompliances |
.1.3.6.1.4.1.9.9.373.2.1 |
| ciscoFdmiMIBGroups |
.1.3.6.1.4.1.9.9.373.2.2 |
| Group |
| cfdmiConfigGroup |
.1.3.6.1.4.1.9.9.373.2.2.1 |
|
A collection of objects for configuring FDMI.
|
| cfdmiHbaInformationGroup |
.1.3.6.1.4.1.9.9.373.2.2.2 |
|
A collection of objects for HBA Information.
|
| cfdmiHbaPortInformationGroup |
.1.3.6.1.4.1.9.9.373.2.2.3 |
|
A collection of objects for HBA port information.
|
| cfdmiNotificationGroup |
.1.3.6.1.4.1.9.9.373.2.2.4 |
|
A collection of notifications for managing FDMI.
|
