cisco-itp-act-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-itp-act-mib and use it to monitor vendor specific OID's.
cisco-itp-act-mib file content
Object view of cisco-itp-act-mib:
| Scalar Object |
| cItpActMtp3TableEntry |
.1.3.6.1.4.1.9.9.230.1.1.1.1 |
|
A list of MTP3 accounting objects.
|
| cItpActGttTableEntry |
.1.3.6.1.4.1.9.9.230.1.2.1.1 |
|
A list of Gtt accounting objects.
|
| Tabular Object |
| cItpActMtp3TableId |
.1.3.6.1.4.1.9.9.230.1.1.1.1.1 |
|
The accounting table identifier.
'passed' : signifies that this table instance
represents statistics for packets that
matched an Access Control List (ACL) in
the linkset's inbound ACL and in the
outbound ACL.
'violation' : signifies that this table instance
represents statistics for packets that
did not match an ACL in the linkset's
inbound ACL and in the outbound ACL.
|
| cItpActMtp3LinksetName |
.1.3.6.1.4.1.9.9.230.1.1.1.1.2 |
|
The name of the linkset.
|
| cItpActMtp3Dpc |
.1.3.6.1.4.1.9.9.230.1.1.1.1.3 |
|
The destination point code.
|
| cItpActMtp3Opc |
.1.3.6.1.4.1.9.9.230.1.1.1.1.4 |
|
The origin point code.
|
| cItpActMtp3SI |
.1.3.6.1.4.1.9.9.230.1.1.1.1.5 |
|
The service indicator.
|
| cItpActMtp3RcvdPackets |
.1.3.6.1.4.1.9.9.230.1.1.1.1.6 |
|
Sum of all received packets for this linkset, DPC and
OPC combination.
|
| cItpActMtp3SentPackets |
.1.3.6.1.4.1.9.9.230.1.1.1.1.7 |
|
Sum of all transmitted packets for this linkset, DPC
and OPC combination.
|
| cItpActMtp3RcvdBytes |
.1.3.6.1.4.1.9.9.230.1.1.1.1.8 |
|
Sum of all received bytes for this linkset, DPC and
OPC combination.
|
| cItpActMtp3SentBytes |
.1.3.6.1.4.1.9.9.230.1.1.1.1.9 |
|
Sum of all transmitted bytes for this linkset, DPC
and OPC combination.
|
| cItpActGttLinksetName |
.1.3.6.1.4.1.9.9.230.1.2.1.1.1 |
|
The name of the linkset.
|
| cItpActGttSelectorName |
.1.3.6.1.4.1.9.9.230.1.2.1.1.2 |
|
The Global Title Selector Name.
|
| cItpActGttGta |
.1.3.6.1.4.1.9.9.230.1.2.1.1.3 |
|
The Global Title Address.
|
| cItpActGttTranslatedPc |
.1.3.6.1.4.1.9.9.230.1.2.1.1.4 |
|
The translated point code.
|
| cItpActGttPackets |
.1.3.6.1.4.1.9.9.230.1.2.1.1.5 |
|
Number of packets performing Global Title
Translation.
|
| cItpActGttBytes |
.1.3.6.1.4.1.9.9.230.1.2.1.1.6 |
|
Count of bytes received that required
Global Title Translation.
|
| Table |
| cItpActMtp3Table |
.1.3.6.1.4.1.9.9.230.1.1.1 |
|
This table contains information about the number
of packets and bytes at the MTP3 layer. The
information collected from both directions(send
and receive). The information is broken down
by linkset, Destination Point Code (DPC),
Originating Point Code (OPC) and Signalling
Indicator (SI). This provides the lowest granularity
required by Q752 and allows network management
stations to calculate the required fields in Q752.
|
| cItpActGttTable |
.1.3.6.1.4.1.9.9.230.1.2.1 |
|
This table contains information about the number
of packets and bytes required for global title
translation.
|
| Object Identifier |
| ciscoItpActMIB |
.1.3.6.1.4.1.9.9.230 |
|
The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signalling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signalling System No. 7.
|
| cItpActMIBNotifs |
.1.3.6.1.4.1.9.9.230.0 |
| cItpActMIBObjects |
.1.3.6.1.4.1.9.9.230.1 |
| cItpActMIBConformance |
.1.3.6.1.4.1.9.9.230.2 |
| cItpActMtp3 |
.1.3.6.1.4.1.9.9.230.1.1 |
| cItpActGtt |
.1.3.6.1.4.1.9.9.230.1.2 |
| cItpActMIBCompliances |
.1.3.6.1.4.1.9.9.230.2.1 |
| cItpActMIBGroups |
.1.3.6.1.4.1.9.9.230.2.2 |
| Group |
| cItpActMtp3Group |
.1.3.6.1.4.1.9.9.230.2.2.1 |
|
Accounting for MTP3 objects.
|
| cItpActGttGroup |
.1.3.6.1.4.1.9.9.230.2.2.2 |
|
Accounting for Global Title Translation.
|
