| cItpmConnPortNumber |
.1.3.6.1.4.1.9.9.379.1.1.1.1.1 |
|
The port number used to establish TCP connection.
|
| cItpmConnKeepAlive |
.1.3.6.1.4.1.9.9.379.1.1.1.1.2 |
|
Specifies the keepalive time value in milliseconds.
Keepalive packets are sent between the monitor and the
remote server as a mechanism to ensure the TCP session
is active and detect session failure in a timely manner.
During periods of idle monitor traffic, the monitor will
send a keepalive packet to the remote server at the
specified interval. The monitor also expects to receive
a keepalive packet from the remote server at the same
interval. If the monitor does not receive a
keepalive packet from the remote server in two times the
keep alive value, the monitor will close the TCP
session. The value of zero disables the keep alive
processing.
|
| cItpmConnMaxQDepth |
.1.3.6.1.4.1.9.9.379.1.1.1.1.3 |
|
The maximum number of packets that can be queued for
transmission. If the monitor cannot send a TCP packet
immediately, the packet will be queued for retransmit.
This object defines the maximum number of TCP packets
that may be queued for retransmit. Once the number of
TCP packets on the queue reaches the value specified by
this object, additional TCP packets will be
dropped.
|
| cItpmConnCongOnset |
.1.3.6.1.4.1.9.9.379.1.1.1.1.4 |
|
Threshold used to mark onset of congestion.
When the cItpmConnQueueDepth object reaches value
specified by this object the connection will
considered congested. It will remain congested until
the cItpmConnQueueDepth object drops below the value
specified by the cItpmConnCongAbate object.
|
| cItpmConnCongAbate |
.1.3.6.1.4.1.9.9.379.1.1.1.1.5 |
|
Threshold used to mark end of congestion.
When the cItpmConnQueueDepth object drops below the
value specified by this object the connection will
exit congestion.
|
| cItpmConnRcvWindowSize |
.1.3.6.1.4.1.9.9.379.1.1.1.1.6 |
|
The size of TCP receive window. This object
defines the number of outstanding (unacknowledged)
bytes that the ITP monitor can receive on TCP
connection.
|
| cItpmConnFastStart |
.1.3.6.1.4.1.9.9.379.1.1.1.1.7 |
|
Defines the fast-start option for establishing TCP
connectivity as follows.
'true' - FastStart is enabled.
'false' - FastStart is disabled.
Normally, after the TCP session with the remote server
is established, the monitor will not send MSUs from the
monitored links to the server until the server responds
to the first keepalive.
This mechanism prevents the ITP from over-running the
server until the TCP session and receive window sizes
are fully established.
Configuration of fast-start overrides this mechanism and
allows the ITP to start sending MSUs to the server
immediately after the TCP session is established.
Caution should be used with the fast-start configuration
as MSUs may be lost until the TCP session server and
receive window sizes are fully established.
|
| cItpmConnQueueDepth |
.1.3.6.1.4.1.9.9.379.1.1.1.1.8 |
|
The number of packets queued for transmission. The
maximum value is specified by the cItpmConnMaxQDepth
object.
|
| cItpmConnMonitorState |
.1.3.6.1.4.1.9.9.379.1.1.1.1.9 |
|
The state of the connection as follows.
'active' - connection is transmitting SS7 link
traffic to server.
'inactive' - connection is not transmitting SS7 link
traffic to server.
|
| cItpmConnCongestion |
.1.3.6.1.4.1.9.9.379.1.1.1.1.10 |
|
Congestion indicator for connection as follows.
'true' - connection is congested.
'false' - connection not congested.
Congestion onset occurs when the cItpmConnQueueDepth
object reaches the maximum allowed value specified by
the cItpmConnMaxQDepth object.
Congestion abate occurs when the cItpmConnQueueDepth
object reaches the maximum allowed value specified by
the cItpmConnMaxQDepth object.
|
| cItpmConnCongCounts |
.1.3.6.1.4.1.9.9.379.1.1.1.1.11 |
|
The number of times the connection has entered
congestion.
|
| cItpmLinkNumber |
.1.3.6.1.4.1.9.9.379.1.1.2.1.1 |
|
This object specifies the secondary index for
objects in the cItpmLinkTable table. A unique
number is assigned to each link when it is
assigned to a connection.
|
| cItpmLinkDescription |
.1.3.6.1.4.1.9.9.379.1.1.2.1.2 |
|
Brief customer defined description.
|
| cItpmLinkSlotNumber |
.1.3.6.1.4.1.9.9.379.1.1.2.1.3 |
|
The slot number support interface used to collect
SS7 link traffic.
|
| cItpmLinkStatus |
.1.3.6.1.4.1.9.9.379.1.1.2.1.4 |
|
The state of the monitored SS7 Link as follows.
'active' - SS7 link is available for monitoring.
'inactive' - SS7 link is unavailable for monitoring.
|
| cItpmLinkRcvdMsus |
.1.3.6.1.4.1.9.9.379.1.1.2.1.5 |
|
The number of MSUs received on SS7 Link.
|
| cItpmLinkRcvdMsuDrops |
.1.3.6.1.4.1.9.9.379.1.1.2.1.6 |
|
The number of MSUs that were received on SS7 Link
and were dropped due to congestion.
|
| cItpmLinkRcvdMsuRate |
.1.3.6.1.4.1.9.9.379.1.1.2.1.7 |
|
The number of MSUs received on SS7 Link per second.
|
| cItpmLinkRcvdBitsRate |
.1.3.6.1.4.1.9.9.379.1.1.2.1.8 |
|
The number of bits received on SS7 Link per second.
|
| cItpmLinkSentMsus |
.1.3.6.1.4.1.9.9.379.1.1.2.1.9 |
|
The number of MSUs sent on SS7 Link.
|
| cItpmLinkSentMsuDrops |
.1.3.6.1.4.1.9.9.379.1.1.2.1.10 |
|
The number of MSUs that were sent on SS7 Link
and were dropped due to congestion.
|
| cItpmLinkSentMsuRate |
.1.3.6.1.4.1.9.9.379.1.1.2.1.11 |
|
The number of MSUs sent on SS7 Link per second.
|
| cItpmLinkSentBitsRate |
.1.3.6.1.4.1.9.9.379.1.1.2.1.12 |
|
The number of bits sent on SS7 Link per second.
|
